Is it possible to install Final Cut Studio 2 with a MacBook 2.1 GHz 13.3in?

I just purchased a new MacBook and Final Cut Studio, but my computer won't let me install FCP 6. I think it is a graphics card problem. Is there something I can purchase or download to make it compatible, or do I need to replace computer or use an older version of FCP?
Thanks
Tara

Hi Tara,
welcome to the forums,
I beleive your MacBook comes with an integrated graphics processor.
Unfortunately FCP requires a separate graphics card see minimum specs in the link below:
http://www.apple.com/finalcutstudio/specs.html
Perhaps you can replace your MB with a MBPro as the latter is perfect for FCP6.
Best,
G.

Similar Messages

Error messages I when install final cut studio on my Macbook Pro

Why am I getting error messages, I when install final cut studio on my Macbook Pro? The Mac book Pro is a 2.5 ghz 17'. The software; FC Studio is about a year old.
Boe

What error message(s) are you getting?
Also, if you don't get an answer here, you might post in the FCS discussion.

Problem installing Final Cut Studio 2 on MacBook Pro

I'm trying to install Final Cut Studio 2 on a MacBook Pro / Snow Leopard but when it comes to choosing install options Final Cut Pro is greyed out and just says skip.
I've done some research and found people with the same problem but none of the fixes I've seen have worked. I also have Logic Pro installed - which I installed first - which seems to be causing the problem. I've tried removing Logic but am still seeing the same problem.
Besides a clean install does anyone have any suggestions?

Read this article on how to install final cut pro after logic studio.

Installing Final Cut Studio Now Safari doesn't show QT

I just installed Final Cut Studio on my Macbook running 10.4.7 which installs version 7.1.2 of quicktime pro. But now Safari won't play any quicktime movies though my Firefox and Flock browsers will play QTmovies. I'd download and reinstall quicktime normally but Final Cut Studio doesn't give me a serial number for QTPro so I suspect that if I reinstall quicktime I'll wind up with no more quicktime pro or at the minimum I'd have to uninstall Final Cut Studio and reinstall to get QTPro and might be back in the same loop
Anyone have any experience with this or think of a way around getting Safari to show quicktime movies?

But now Safari won't play any quicktime movies though my Firefox and Flock browsers will play QTmovies.< </div>
You might try the Quicktime forum here on apple.com. All I can tell you is that yours is the first post I can recall describing this particular issue with an installation of FCP.
I'd download and reinstall quicktime normally but Final Cut Studio doesn't give me a serial number for QTPro so I suspect that if I reinstall quicktime I'll wind up with no more quicktime pro or at the minimum I'd have to uninstall Final Cut Studio and reinstall to get QTPro and might be back in the same loop< </div>
Your Pro license is part of the FCP install now so it will be still be there, it's not associated with the QTPlayer any longer.
You can force a reload of earlier versions of QT by going to your Library and searching for receipts for QT updates. Delete them and Software Update will pull down a new update file for you.
Umm, on second thought, wait for a few more hours till some other folks respond to your inquiry.
bogiesan

How can I install Final Cut Studio 2 on my new MacBook Pro with Lion?

I just purchased and received a new 15" MacBook Pro (non-retina) last week. I need to install Final Cut Studio 2 on this computer. I have researched this and found that I need to install Rosetta from the Snow Leopard DVD in order to do this. This is the first Mac I've bought ( although I've been working with them for years), so I don't have a Snow Leopard DVD. I am a high school teacher and we use FCS 2 for my classes so buying FCP X is not a viable option for me since I teach FCP 6. The iMacs we use in school run Leopard and were never upgraded to Snow Leopard (budget cuts and all), so I can't even borrow one from my district.
Does anyone know how I can obtain Rosetta? Or another way to install this without it?
Thank you ! :)

There is no way to add Rosetta support because it is not supported by OS X Lion at system level. This has been documented before the release of OS X Lion by itself.
If you really need Final Cut Studio 2, I would return your computer if possible, and purchase a Mac that is capable of running Snow Leopard (all 2010 models, early 2011 MBP and some other 2011 models)

7 Hours to Install Final Cut Studio 2??

I just installed Final Cut studio 2 on my Brand New Mac Pro and it took 7 hours... I installed it on my other Mac Pro back in May and it maybe took maybe an hour. I was just going to ask and see if this was normal or if I should be concerned. I have also put a black magic card in the machine and run into some issues with that as well.
Thanks for any thoughts you may have.

Here's the trick you NEED to know.
Once you know how to do this you will never again need to waste an entire evening inserting DVD's.
1) Make disk images of all your DVD's using Disk Utility. Be sure to save them as DVD/CD Master in the Image Format dialogue box, with no compression added. Save all the disk images to an external drive if possible. Final Cut Pro users all have big external drives, but in a pinch this would work off an internal drive if you have the space.
2) Mount all of the DVD copies on your desktop, all of them at one time. This assumes you have ample memory, which if you are running Final Cut Pro you'd better have.
3) Start the install. Select your options. Then watch the magic as your Mac loads the DVD copies on your desktop until the process is done. It's that easy.
It takes a while to make the disk images, but once you have them saved to your external drive you can use them again when you get a new machine or need to reinstall for any reason. This works with Logic Studio as well as the Adobe suites- I've used this process for years. In the old days we used this process for floppies; works just as well with CD's and DVD's. Once you try it you will be dedicating an external drive to software installer disk images.
Cool, or what?
Message was edited by: bigwheel

Why Can't I Install Final Cut Studio?

I have a MacBook Pro which is about 12 months old. It has a 2.66GHz Intel Core i7 Processor and 8G of RAM. I have been trying to install Final Cut Studio 5.1. Yeah I know that is an OLLLLLLLLLLLD version. Why I chose not to update is neither here nor there. I was about to update when Final Cut Pro X was realeaded and FCS vanished into the ether. I really only wanted DVD Pro but when that wouldn't install I went back to Square 1.
The specificationa as stated are:- "These discs contain the files required to install Final Cut Studio 5.1 on either PPC or Intel based Mac computers."
The error message that shows up on the screen when I click on the install package is:- "You can't open the application Final Cut Studio pro.mpkg because Power PC applucations are no longer supported."
This is despite the stated specifications and the fact that there is a Universal Icon on the discs.
I am also having a simillar but not the same problem with iLife '06 but i'll start another thread on that.
I'm confused, thanks for your help in advance.

Your problem is you are running Lion as your OS (10.7) and Lion does not support Rosetta which is required to run the INSTALLER of FCS 2. If you were running Snow Leopard, you would have been able to do the install.
MtD

How can Install Final Cut Studio in my Mac Pro Early 2009 ??

I have Final Cut Studio 7 NOT installed yet and Mac Pro Early 2009 with OSX 10.9.5. I have Final Cut Pro X Version 10.1.4 installed. Can I installed Final Cut Studio here together with FCPX ?? Maybe not. What is the best way to install FCP Studio??
Do I need to make a partition? How? If so, what is the best OSX Version for FCP Studio ?? 10.6, 10.7, 10.8, 10.9 ??
Thanks for any help I can get
Alberto Marban

Here is the Best Practice Guidelines from Apple:
Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
MtD

Imac won't let me install Final cut studio 2..it will let me install the upgrade, but it has no live type and i need it to work on my current projects. How do I get Live type back installed in iMac

I just purchased an iMac for home and went to install final cut studio 2 and it gave me an error saying something about "PowerPC" not used or something like that. Installed the studio upgrade just fine...but it has no "Live Type" which I need to work on projects I have been using in my Mac Pro at my work place. How do I get "Live Type" to install in this iMac? Downloaded Live Type upgrade but that won't update cause there's no "Live Type" in the applications.

It sounds like you have Lion installed on your new imac, although your profile says SL 10.6.8 (you may want to change this.)
If you have the Snow Leopard install disc I believe you can install "Rosetta" from the extras folder which will then, if you have the original FCS2 discs , allow you to select and install Live Type and LIve Type content only from the custom install options.
I hope this will work for you.
DM

Unable to install Final Cut Studio 2.0

I had the previous version of FInal Cut Studio and just purchased Final Cut Studio 2. I chose to uninstall Final Cut Studio first by dragging all the studio programs to the Trash figuring I didn't want to chance having two versions of Final Cut Studio on my computer.
I then went in to install Final Cut Studio 2. It allowed me to install the items such as Motion Content, LiveType, Audio Content, Studio Pro, etc. The option for selecting Final Cut Pro was greyed out and said skip. I don't know why but it's like it already thought it was on there and would just upgrade it. I tried it several times but always had this same set of options.
I went on then and did an install of Final Cut Studio hoping that when it came to installing it would actually work right. Well it installed all the supporting programs but not Final Cut Pro. How can I properly install the whole suite?

The FinalCut Suite 5 I'm running is misbehaving so before I install the new FinalCut Pro 6 Suite, I'd like to uninstall all of FCP Suite components and _all of their settings and customizations_. How do I make sure the new install is _absolutely clean and nothing from the previous installation effects it?_
Thanks,
Uri

Can't install Final Cut Studio

I have a MacBook Pro OS X 10.6.6 and am trying to install Final Cut Studio. When individually do Livetype or Motion it works. When I do the Final Cut disc I get this error message.
"Your computer does not have the hardware required to run this software. See the Read Me for details."
My computer should have necessary specifications with 2.66 GHz Intel Core i7, 8 GB 1067 MHz DDR3.
What should I do?

That could very well be a Pre-Intel version of FCS. It won't install properly on an Intel Mac.

Can i install Final cut studio 5 and DVD Studio Pro 4 on OSX lion

Is any body who can help me on giving me some direction on how to install Final Cut Studio 5.1 and DVD Studio Pro 4 on my OSX Lion, if it's doable. Thanks

The easiest way is to install Rosetta from a Mac OS X 10.6 DVD first.
There's also a way of doing it via Terminal that's been posted here a couple of times. A search should bring that up.
Edit: Found it... https://discussions.apple.com/message/21416133#21416133 read the second post.

Can't install Final Cut Studio 2 because "PowerPC applications are no longer supported"

Bought a brand new 15" MacBookPro OS X 10.7 2.2Ghz Intel Core i7 and tried to install Final Cut Studio 2. Got the error message "You can't open the application FinalCutStudio.mpkg because PowerPC applications are no longer supported." Oh no, does this mean I have to spend more money!???

I'd like to provide an update on this situation in case anyone is in the same boat I am.
I went to the Apple store today. I asked if I could downgrade my operating system. They said no, since it came pre-installed with Lion. I asked if Final Cut Studio 3 was compatible with Lion. They said yes, for the most part. They said there was an issue exporting video in 1080p.
Of course, conveniently Apple is no longer selling FCS3 and the ones on Ebay I saw have gone up to more than $650 a copy. I am out $400 for stupidly buying FCS2 a few months ago, which is now useless to me. I told the Apple guy that I'm not buying FCS X until they work out all the kinks. This leaves me with this laptop that I bought for video editing with no editing software to use.
I never thought I'd say this, but I'm actually considering getting Premiere Pro now for Apple, which is supported in Lion and is running a deal for 50% off. (http://www.adobe.com/products/creativesuite/faq.html#lion-os) If Apple doesn't start selling FCS 3 again, they are really not giving me any choice but to switch!

I have not upgraded my Final Cut Pro in a while. Is it not possible to upgrade Final Cut Studio anymore? Do you have to buy the software seperate?

Is it not possible to upgrade Final Cut Studio as a whole? Do you have to now buy the software separately?

It is still possible to upgrade some versions of FCP, especially the Studios, As always, the upgrades apply to base versions that needed to be purchased. The latest version of Final Cut Studio is no longer for sale from Apple but it doesn't run on a PowerMac anyway. The only Final Cut Pro product currently for sale is Final Cut Pro X, which requires an Intel Mac.

Can I install Final Cut Studio 3.0 after already having FCP X?

I have already installed FCP X on one of my computers. I need to install Final Cut Studio 3.0 on the same computer now.
When I tried to install, I get the selection screen and Final Cut is ghosted out and unavailable.
Is there a way around this? I know FCP X can co-exist with Final Cut Studio 3.0 if it's installed afterward, but I need to know if I can install Final Cut Studio after FCP X which I imagine is a fairly rare situation.
I'm on Lion -- in case that matters.
_Matt_

I'm not positive, but I believe that FCPX installer is aware of FCS. If you intsall FCPX and FCS is already on your computer, the FCPX installer will move FCS into a folder inside Applications. I'm sure FCS installer is not aware of the existance of FCPX.
I would guess that you would have to uninstall FCPX, install FCS and then, if you wanted, re-install FCPX, using the App Store.
I have not actually done this, but I'm guessing that having FCPX already on your computer is what's causing issues with the FCS installer.

Is it possible to install Final Cut Studio 2 with a MacBook 2.1 GHz 13.3in?

Similar Messages

Maybe you are looking for