Is it possible to install Microsoft Storage Server on Cisco NSS 322?
As the NSS 322 doesn't seem to support Microsoft Offline files (I've been told by Cisco support that this is a "common problem" with network-attached storage devices, but I've got offline files working OK with a basic linux box, so I don't believe this to be true), can we install a copy of MS Storage Server 2008 on it instead? Anyone have any experience with this?
I spoke with several Cisco Reps who directed me to purchase these products:
1x Small Business Network Storage Server NSS322
2x Small Business Router SMB|RV042 4PORT RT (one for our two person office on the East Coast & one for our Rep on the West Coast)
I was told this is what I needed to buy from Cisco to run:
Microsoft Windows Small Business Server 2008
Quick Books Enterprise
Can you tell me if:
1. I am suppose to install SBS2008 via a portable DVD drive on the NSS322, or if I have to work around this as outlined here:
http://www.techrepublic.com/blog/datacenter/two-ways-to-circumvent-the-dvd-drive-requirement-for-installing-windows-server-2008/324
2. If I have been misguided in my purchase & SBS2008 can not be run from the server I purchased from Cisco?
3.If I have not purchased the correct item from Cisco, which item should I purchase to run SBS2008 & QuickBooks?
I can not get in touch with a Cisco Rep at this moment b.c. of a technical issue... yikes!
Please advise, as I have little time to start setting up.
Similar Messages
-
Is it possible to install Microsoft SQL Server 2008 Express on windows server 2012 (not R2) ?
I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?
Yes you can install SQL server 2008 express on windows 2012 OS see below link
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx#Express32
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Error In Re-install Microsoft Exchange Server 2010
Hi
Ihad Installed Ms Exchange Server 2K10 and work correctly.
I Did somne mistake and I had to uninstall and re-install that
but when I try to install that there are many Errors Apears.
Mentioned : when I was uninstall exchnage I delete Every Thing In Active Directory Users and computers
Errors:-----------
Elapsed time: 00:00:27
Organization Prerequisites
Failed
Error:
The Exchange organization does not support this version of Exchange Server.
Warning:
Setup is going to prepare the organization for Exchange 2010 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected in this topology. After this operation, you will not be able to install any Exchange 2007 server roles.
Elapsed Time: 00:00:19
Languages Prerequisites
Completed
Elapsed Time: 00:00:01
Hub Transport Role Prerequisites
Failed
Error:
The Exchange organization does not support this version of Exchange Server.
Error:
Setup cannot continue because one or more SMTP/Send connectors have invalid settings: Couldn't find the Enterprise Organization container.
Client Access Role Prerequisites
Failed
Error:
The Exchange organization does not support this version of Exchange Server.
Elapsed Time: 00:00:01
Mailbox Role Prerequisites
Failed
Error:
The Exchange organization does not support this version of Exchange Server.
Elapsed Time: 00:00:01check out is there any watermark key in the registry - A watermark in the registry identifies where Setup failed. You will not have to answer the Exchange 2010 Setup wizard questions again when you resume a failed Setup. You can resume the failed install,
and let it succeed.
A few article for more understanding
http://technet.microsoft.com/en-us/library/ff805039%28v=exchg.141%29.aspx
http://blogs.technet.com/b/exchange/archive/2007/05/21/3402900.aspx
Exchange Queries -
It is not possible to install LenovoEMC Storage Manager for Linux on Ubuntu 14.10
hi,
I have big problem installing LenovoEMC Storage Manager for Linux on Ubuntu 14.10 64bit.
I downloaded it from https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/26108
Installed JRE (both 64 and 32 bit)
Selection Path Priority Status
0 /usr/lib/jvm/java-8-oracle/jre/bin/java 1 auto mode
* 1 /usr/lib/jvm/java-8-oracle/jre/bin/java 1 manual mode
2 /usr/local/java/jre1.8.0_25/bin/java 1 manual mode
java -version
java version "1.8.0_25"
Java(TM) SE Runtime Environment (build 1.8.0_25-b17)
Java HotSpot(TM) 64-Bit Server VM (build 25.25-b02, mixed mode)
tryed with both. but without success.
I am still getting error:
./setup-1.4.4.14439.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
1- Deutsch
->2- English
3- Español
4- Français
5- Italiano
6- Nederlands
7- Português (Brasil)
8- Svenska
CHOOSE LOCALE BY NUMBER: 2
=======================================================
Installer User Interface Mode Not Supported
The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
=======================================================
Any help?
Thanks!
Solved!
Go to Solution.Ok , i got this baby working.. sudo is not a problem here.. you need to specify additional java parameter for installer!
./setup-1.4.4.14439.bin LAX_VM /usr/bin/java -
Unable to install microsoft sql server management studio 2008 express
When i install management studio 2008 express, throws an error stating that "SQL server 2008 Setup reqiures Microsoft .NET framework from http:.... and then rerun setup.
Can any body help me in this, and also i have installed .NET framework 3.5.
Thanks.Hi sivak_tamilan,
According to your description, we need to verify if you install and enable the .NET Framework 3.5 SP1, it is a prerequisite for SQL Server 2008 standalone instance.
In the setup, the SP-bit must be set to “1″, you can do as follows:
Open the registry editor and browse to the key,
Then locate the value SP, double-click it and change it from zero to”1”.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5
There is a similar issue about this error, you can review the following article.
http://www.undermyhat.org/blog/2011/03/resolved-microsoft-sql-server-2008-setup-requires-microsoft-net-framework-3-5-sp1-to-be-installed/
In addition, if you install SQL Server on a computer that is running Windows Server 2012 or Windows 8, you must make sure that you fulfill the minimum requirements. For example, you must apply SQL Server 2008 Service Pack
3 or a later update.
For more information, see:http://support.microsoft.com/kb/2681562/en-us
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Unable to install Microsoft SQL Server 2008 R2
It is showing error: Attempted to perform unauthorized operation. So was unable to install
Database Engine
Replication
TITLE: Microsoft SQL Server 2008 R2 Setup
The following error has occurred:
Attempted to perform an unauthorized operation.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0x6121810A%25400x92D13C14
BUTTONS:
&Retry
Cancel
Log File
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068119551
Exit facility code: 1211
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2013-01-25 10:59:08
End time: 2013-01-25 11:13:30
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130125_105747\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0x6121810A%400x92D13C14
Machine Properties:
Machine name: VARUNGUPTA-PC
Machine processor count: 2
OS version: Windows Vista
OS service pack: Service Pack 2
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.3.5500.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.3.5500.0 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: d:\a716bfc2c0347dcd1c0fc7fcedc92a06\x86\setup\
Installation edition: EXPRESS_ADVANCED
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: VarunGupta-PC\Varun Gupta
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130125_105747\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130125_105747\SystemConfigurationCheck_Report.htmI was finally able to get out of this issue... but later got stuck here with following error
TITLE: SQL Server 2008 R2 Setup
The following error has occurred:
Attempted to perform an unauthorized operation.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.2500.0&EvtType=0x6121810A%25400x92D13C14
BUTTONS:
&Retry
Cancel
Also tried by running as administrator.
It failed to install
Data Engine Services
SQL Server Replication
Full - Text Search
Reporting Services
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068119551
Exit facility code: 1211
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2013-01-27 01:11:08
End time: 2013-01-27 01:23:26
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130127_010951\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0x6121810A%400x92D13C14
Machine Properties:
Machine name: VARUNGUPTA-PC
Machine processor count: 2
OS version: Windows Vista
OS service pack: Service Pack 2
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 R2 SQLEXPRESS MSSQL10_50.SQLEXPRESS Database Engine Services
1033 Express Edition 10.51.2500.0 No
Sql Server 2008 R2 SQLEXPRESS MSSQL10_50.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.51.2500.0 No
Sql Server 2008 R2 SQLEXPRESS MSSQL10_50.SQLEXPRESS Full-Text Search
1033 Express Edition 10.51.2500.0 No
Sql Server 2008 R2 SQLEXPRESS MSRS10_50.SQLEXPRESS Reporting Services
1033 10.51.2500.0
No
Sql Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.51.2500.0 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: c:\c49037ca8dfa571dfe4480d170\x86\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: c:\Program Files\Microsoft SQL Server
INSTANCEID: VARUNGUPTA
INSTANCENAME: VARUNGUPTA
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: c:\c49037ca8dfa571dfe4480d170\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: VarunGupta-PC\Varun Gupta
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130127_010951\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130127_010951\SystemConfigurationCheck_Report.htm
Here is Detail.txt file
http://sdrv.ms/W759Wo -
Microsoft Terminal Server needs Cisco layer of authentication
We are running Microsoft terminal services. We connect to our main office using the Microsoft remote desktop client. We insert the fixed public IP address of our server in the remote desktop client. That remote desktop client then connects to terminal services and the user is queried for a user name and password. We would like to add a Cisco solution that would put an additional query for a Cisco device authenticated username and password before the Microsoft Terminal Server authentication box for user name and passwords appears...Seeking guidance on which Cisco hardware we could purchase for this purchase and what feature of that purchase would be configured to allow for accomplishment of security goal.
thankyou.Lew: I suggest you post same question in Microsoft Forums.
I am not fully aware how microsoft server will query cisco auth server (ACS for example). But in microsoft forums they might be able to help better.
If they reply with something please share it with us here for general knowledge.
Regards,
Amjad
Rating useful replies is more useful than saying "Thank you" -
Can not install Microsoft SQL Server 2012 Express on Win7, 64 bit
Hi,
I had a Win7 Ultimate 64bit, Intel(R) Core(TM) 2 Duo 2.8Ghz, 4GB SDRAM, 500GB HDD. I have been used Visual
studio 2010, SQL Server 2008 R2 (SQL Management Studio), SQL Server Express2005, SQL Server Express2008, Microsoft Office 2010. I downloaded setup from microsoft.com/en-us/download/details.aspx?id=29062,
after extract files and run setup which it's giving me an error message.
"The operation system on this computer or its service pack level does not meet the minimum requirements for SQL server 2012. To determine the minimum required operating system supported for this SQL server release, see Hardward and software
Requirement for installing SQL server 2012 at: http://go.microsoft.com/fwlink/?LinkID=195092"
Anyone help me this issueit requires a minimum of Windows 7 SP 1 before installing SQL server 2008.
It can be downloaded from below:
http://support.microsoft.com/kb/976932/en-us
For more details check below:
http://msdn.microsoft.com/en-us/library/ms143506.aspx
Please click the Mark as answer button and vote as helpful if this reply solves your problem -
Is is possible to install X64 windows server 2008 R2 on Virtual machine 2007 Service pack1?
I am trying to install window server 2008R2 X64 on virtual machine 2007 service pack 1. But unable to proceed. while refering various forum,
It is listed that from service pack1 we can install windows 7 & window server 2008 std edition. But nowhere it listed that window server 2008R2 is supported or not.
Can one let me know if it fisible to install window server 2008R2 X64 on virtual pc 2007 or any work around.
Thanks,
AKI'd ask them over here.
https://social.technet.microsoft.com/Forums/en-us/home?forum=virtualserver
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Can not install Microsoft SQL Server 2012 Express on Win7, 64 bit, used on VS Studio 2010
I had a Win7 Ultimate 64bit, Intel(R) Core(TM) 2 Duo, 4GB SDRAM, 500GB HDD. I have been used Visual
studio 2010, SQL Server 2008 R2 (SQL Management Studio), SQL Server Express2005, SQL Server Express2008, Microsoft Office 2010. I downloaded setup from microsoft.com/en-us/download/details.aspx?id=29062,
after extract files which it's giving me an error message.
Anyone help me this issue.
Other questions is What if I want to use SQL management Studio 2008 R2 and connect SQL Server 2012 on Windows 7I downloaded setup from microsoft.com/en-us/download/details.aspx?id=29062,
after extract files which it's giving me an error message.
Anyone help me this issue.
I'd ask them over here.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlexpress
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
SIP trunking between Microsoft OCS server and Cisco Voice GW router.
Hello All,
I have a client with an existing Microsoft OCS (office communications server) environment with the OCS server in their head office. The OCS clients in the remote Office registers with the OCS server in the head office. The WAN connectivity between the remote office and the Head office is MPLS.I would like to facilitate local call (PSTN) features at the remote site through a newly proposed Voice gateway router.
Can I achieve this by doing a SIP trunk between the OCS server in the head office to the newly proposed voice GW router in the remote office through the existing MPLS link. If yes, Could any one please assist me in this regards or suggest any other best solution to achieve the same.
Thank you in advance,
Mohammed Ameen RHi David,
this is a normal behaviour. To CUCM, OCS is a remote destination (just like your mobile phone). When your mobile phone hangs up, the system will put the call on hold for 10 sec.
This is there for the mobile user to go to his desk to pick up the call and continue the conversation (part of single number reach feature)
The best practise will be for the user to ensure that the other party hangs up the call first before he hang up.
Please grade if you think it's useful =) -
Microsoft Exchange Server on Mac OS X Server
I am running Mac OS X Leopard Server on my Mac Pro with multiple clients, all using Mac OS X Leopard. Each client also has Microsoft Office 2008 for Mac installed with Entourage. Is it possible to install Microsoft Exchange Server on the Mac Pro and use it to set up calendaring for all of my Mac clients through Entourage?
Hi Benjamin,
Apologies for Jeff's rather useless answer.
You can absolutely install Microsoft Exchange on a Mac Pro server to accompany OS X Server.
Head over to VMware, Parallels or Oracle and grab a virtualisation hypervisor. I personally recommend VMware ESXi.
Setup a Virtual Machine running a copy of Microsoft Windows Server 2012 and Microsoft Exchange Server 2013. (More information here http://www.microsoft.com/en-us/server-cloud/products/windows-server-2012-r2/buy.aspx#fbid=f4pyYTvvgji and here http://office.microsoft.com/en-us/exchange/microsoft-exchange-server-2013-business-email-email-server-try-now-FX103765014.aspx)
If you would rather not involve yourself with all the fuss involved with maintaining Microsoft Exchange, head over to Microsoft Office's website and Subscribe to Office 365 for Business. If you would rather not work with Microsoft at all, head over to Google
and setup Google Apps.
Thanks,
Will -
I'm trying to install Windows Azure PowerShell on my Windows 7 SP1 Enterprise laptop. As a prerequisite, it needs to install Microsoft SQL Server 2012 Express LocalDB, I but keep receiving an error:
Service 'SQL Server VSS Writer' (SQLWriter) failed to start. Verify that you have
sufficient privileges to start system services.
The service that it tries to use by default is the Local Service. I verified that it has log on as a service privileges and even did a restart. Same error.
any ideas?
Cross posted in Windows
AzureHi ,
According to your description, when you install SQL Server 2012 Local DB , it encounter the error about SQLWriter. We need to verify if you invoke SQLLOcalDB.msi directly, and check
MSSQL service is running and other service’s status.In addition, you can go to event viewer and check the error logs for analysis.
There is a similar issue about Service SQL Server VSS Writer and troubleshooting SQL Server 2012 Express LocalDB, you can review the following article.
http://blog.andreloker.de/post/2008/07/17/SQL-Server-hotfix-KB948109-fails-with-error-1920.aspx#!
http://social.technet.microsoft.com/wiki/contents/articles/4609.troubleshoot-sql-server-2012-express-localdb.aspx
Thanks,
Sofiya Li
Your Name
TechNet Community Support -
What am I trying to do?
I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
error logs at the bottom of the page but the basics are in order it will throw which loop around are:
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
What am I running?
2 X DC on domain and forest functional level 2008R2 both writable
1 X fresh install of Windows 2012 R2 which is domain joined
What have I tried?
Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
Rebooted every server
Run setup as Administrator
My account is part of the domain Enterprise Admin group
Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
Computer Configuration Windows Settings
Security Settings + Local Policies
User Rights Assignment Mange auditing and security log
Turned off firewall on DC and Exchange Server even stopped the service
Turned off all AV on the DC and Exchange Server
Checked I could telnet to global catalog servers on port 3268 which I can
Checked the global catalog records existed in DNS which they all do
Done the obvious ping tests all round which confirms connectivity
Schema has been prepared using appropriate commands before running the setup exe
setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
Making sure the following path has full permissions:
EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
Restarted Microsoft Exchange Active Directory Topology service
DcDiag all looks good
What have I noticed that is suspicious?
Microsoft Exchange Transport service will not start even though both of its dependences services have started:
Microsoft Filtering Management Service
Microsoft Exchange Active Directory Topology Service
It will eventually error with
“Windows could not start the Microsoft Exchange Transport Service on local computer
Error 1053: This Service did not respond to the start of control request in a timely fashion”
This error is from the GUI wizard itself:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Exchange logs which have been written:
**The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
[01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
'{ mydomain.com}'
[01/20/2015 17:13:20.0084] [2] User specified parameters:
-DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
[01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
[01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
[01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
[01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
Windows Event Viewer:
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
in either the local site 'Default-First-Site' or the following sites:Hi apl228,
1. Please make sure the IPv6 is enabled.
2. Please make sure the account that install Exchange server has Administrator permission.
3. Please make sure DNS has been configured correctly.
Thanks
Mavis Huang
TechNet Community Support -
Windows Storage Server 2008 R2
Hello,
We have install Windows storage server 2008 R2 and now we received a request to install SP1 on the server.
So can we install SP1 on Windows storage server 2008 R2?
Server manufacture is- IBM
Also please send the download/setup link.
Thanks,
RajendraThanks for reply...
But above patch is applicable for below OS.. but we need SP1 patch for Windows storage
server 2008 R2.
Windows 7, Windows Server 2008 R2
Windows Storage Server is provided as an OEM product (bundled with server/storage hardware).
You should confirm with the OEM, that SP1 is supported by the OEM and if there are any hardware-specific steps or firmware or related packages necessary.
In your example, contact IBM for specific advice.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
Maybe you are looking for
-
Large .dv file plays fine in Quicktime, but audio out of sync in iMovie??
hi, i'm trying to convert some old analog 8mm tapes to digital. to do this, i'm using a sony trv320 camcorder with firewire feeding iMovie '08. i've imported an entire 2 hour tape into iMovie, and everything is fine except that at some point, the aud
-
Can we configure BPM10gR3 in Active Passive topology.
Hi, Can we configure/install BPM10gR3 on WLS in Active Passive topology at Primary & DR site respectively. Any links/References for BPM10gR3 DR topology recommendations?. Thanks & Regards, NL
-
Can't see desktop with blue screen after login
Hi we have a server 2008 ent SP2 that sometimes when use remote desktop or via vmware console to access this server, after login we got blue screen and can't see desktop. after force reboot it recovery. From application log, we find some error: Des
-
How to get AS2 identifier from message received
when we dequeue the message from oracle B2B , is it possible that we extract the as2 identifier as well??
-
Will installing a new operating system make the warranty void
I just bought a HP G3 200 Series 250 Core i3 from Indian online store. The current operating system is free DOS and i want to install windows 8 on it. Will that make my warranty void ?