Is it possible to install multiple Password Export Servers (PES) in the source domain?

I'm unable to find definitive information that says it is not allowable or feasible to install multiple PES servers in the domain. The only hit I have is "Can
PES (for password migration) be installed on more than one DC on source domain?.
I'm unsure if the generated key is good for only establishing a single PES connection, or if it can be used multiple times, or if by generating a new one for the same domain, does it deactivate the other one.
The reason I ask is that we have a distributed forest and will be migrating users from many different locations. We've found that the replication delays between the DCs in the source location can take quite a while to reach the site where the PES server
is running. We can create replication connectors, but I'd also like to see if simply adding another PES service to the local DC is possible.

Hi,
Thanks for your posting.
According to this article, the PES service should run on a domain controller in the source domain:
http://tech.sportstoday.us/windows_server/migrating-from-windows-server-20032008-to-windows-server-2008-r2---multiple-domain-consolidation-migration-(part-2).aspx
Regards.
If you have any feedback on our support, please click
here
Vivian Wang

Similar Messages

HT5628 Is it possible to install MS-Windows on MacBook Pro as the only OS

Is it possible to install MS-Windows on MacBook Pro as the only OS, using all the space of the SSD, by de-isntalling thus completely the Mac OS?

Yes.
but
You will have to erase the drive completely and install Windows, you can't achieve it just by deleting OSX
I do not recommend that you do it.

Is it possible to install leopard on another user account on the same computer?

Is it possible to install leopard on another user account on the same computer?

I think you mean "partition."
Petition:
a formally drawn request, often bearing the names of a number of those making the request, that is addressed to a person or group of persons in authority or power, soliciting some favor, right, mercy, or other benefit: a petition forclemency; a petition for the repeal of an unfair law.

Is it possible to install multiple AIR applications from single install?

I've been asked to find a way to install multiple air applications in one install. Is this possible, or am I going to have to use a 3rd party tool like InstallShield?

I guess it's possible to create a meta-installer, which fires up the individual installers using the command line. It's not the ideal way to do this, but it might work.
Sample code to use the command line from within Flex:
<fx:Script>
if(NativeProcess.isSupported)
    var file:File = File.desktopDirectory;
    file = file.resolvePath("secondAirProgram.air");
    var nativeProcessStartupInfo:NativeProcessStartupInfo = new NativeProcessStartupInfo();
    nativeProcessStartupInfo.executable = file;
    var process:NativeProcess = new NativeProcess();
    process.start(nativeProcessStartupInfo);
</fx:Script>

Is it possible to enqueue multiple elements in a queue at the same time

I want to know that is it possible to add mutiple elements in a queue at the same time, i am able to do one element at a time if i want iw ill be using for loop, but is it possible without for loop????
nilesh

You can't, but if you may redefine the queue datatype as an array.
Paolo
LV 7.0, 7.1, 8.0.1, 2011

Installing multiple web/app servers

Hi all.
Hope someone can help out with this (BPC 5.1)
We have a live environment with 2 SQL boxes (clustered), plus 3 Web/App Servers which are all configured to go through a load-balancer.
I'm trying to setup a DR set of servers, and have built the clustered SQL boxes, plus 1 Web/App server.
Trouble is that I don't yet have a working load balancer on that site.
My questions are:
Do I need the load balancer setup first, then enter the LB address in the "Reporting Server", "Web Server" and "App Server" boxes during BPC install?
Would the lack of a load balancer prevent me from setting up more than one Web/App server, as the 2nd one just hangs about 3/4 of the way through the BPC installation and tells me nothing.
Finally, if the answer to the first question is "yes", will I have to uninstall/re-install BPC, or can I just change the settings in Server Options?
Thanks
Craig

Thanks Carlos
I've now sorted the problem.
For anyone else attempting the same thing:
The load-balancer MUST be referred to by DNS name (e.g. NOT by IP address)
The load-balancer name is entered in the following fields in Server Option on the App Servers:
Reporting Services Server Name
Reporting Services Server External Name
Application Server External Name
Application Server Virtual Name
Web Server External Name
Web Server Virtual Name
Then, once you hit Update on your second App server, you wind up with over 50 rows in the tblServerInfo table (within the AppServer database).
This needs to be backed up, all rows deleted, then go into Server Options on one of your App servers and hit "Update" again.
That way, you get just the normal 32 rows in the table again.
Hope that helps (and makes some kind of sense)
Craig
Edited by: Craig Aucott on Jun 30, 2009 11:18 AM

Creating multiple records from 1 record in the source file for Import DM

Hi Experts,
Today I am working on an interface/import where I want to get the following result:
Source file contains a records like:
Account, Entity, DriverX
Sales,EntityA,ZZ
The BPC appset contains the 2 dimensions Account and Entity next to CostCenter dimension. The DriverX field in the source file is just additional information in the source file. However based on this DriverX we need to determine what CostCenter to choose but we also need to have the same record assigned to a second record in BPC.
Following my example, based on DriverX value I need to create 2 records:
Account, Entity, CostCenter,
Sales,EntityA,CC1
Sales,EntityA,CC2
I don't have a problem assigning the record to 1 CostCenter based on DriverX value but I have a problem creating my second record. Does any of you have had the same "challenge" and if so would you like to share the solution for this?
Best regards,
Johan
PS: I am working on SAP BPC, version 7.0 Microsoft version.

Hi Greg,
Many thanks for your answer. And yes this would be a solution. However I just simplified my case as the decision to create an second record and where to post is depending on more than 1 field in the source.
But I will keep it in mind, because I also can opt for a solution to store data differently in BPC fac-tabels which will help me to use script logic.
If it is not possible to create multiple records from a single records in the standard functionality in the Transformation and/or Conversion file, I have to create a custom DTSX or change my way of storing data.
Anyone else who is having an alternative idea like Greg came up with?
Please let it know!
Best regards,
Johan

PE 9 - Why is my exported file larger than the source?

Hello
I am new to Adobe Premier Elements 9. I have a Digital Video Recorder connected to my television. It produces MPEG-2 TS VIDEO FILEs. I want to import these into PE9 and just cut out the ads.
I tried with a source file that is 1GB in size. I imported it and removed the ads but when I export it using Share > Computer and select settings that mimic the source I stll end up with a 3.7GB file. I thought it should be smaller that 1GB because the video is now about 5 minutes shorter.
In my Export settings I chose:
Multiplexer: TS
Audio: Left it untouched
Video:
Basic Video Settings:
Quality = 4
Everything else set to Automatic (based on source)
Render at Maximum Depth left unchecked
Bitrate Settings:
Encoding: VBR, 1 Pass
Bitrate Level - Custom
Min, Target and Max all set to 15
GOP Settings:
M Frames: 3
N Frames: 12
Is my DVR better at encoding/compressing video that PE9 or are my export setting wrong? Shouldn't the exported file be less that 1GB?

As Steve points out, there are two parameters, that affect File Size:
Duration
Bit-Rate
With a fixed Duration, the only way to adjust File Size is lower the Bit-Rate (lower Bit-Rate = smaller File Size, but at the expense of quality.
Now, some CODEC's will allow one to use a lower Bit-Rate, but still retain perceived quality, better than some others, but it is still the Bit-Rate, that affects the File Size.
Some Export/CODEC options will list the Bit-Rate directly, and MB/sec., where others will instead have a "quality" setting, and the Bit-Rate's MB/sec. will not be directly shown, but will relate to some quality setting.
One major consideration is what is to be done with the resulting output file. If it is to be used for additional editing, then I feel that File Size is not a big issue, as I want the ultimate quality. If one is delivering the output file, then there are many considerations, from the platform of the recipient's computer, to the player being used, to the necessary quality of the file.
Good luck,
Hunt

Is it possible to install firefox 10, aurora and nightly on the same computer without them conflicting each other?

I would love to be able to use the stable release and at the same time I would like to see what's coming up in future releases and test them. I'm wondering if I can install all three of them and maybe even run them at the same time.

Do a custom install and install each version in its own program folder to use multiple Firefox versions.<br />
* https://support.mozilla.com/kb/Custom+installation+of+Firefox+on+Windows<br />
Create a new profile exclusively for each Firefox version.<br />
Create a desktop shortcut with -P "profile" appended to the target to launch each Firefox version with its own profile.
See these mozillaZine KB articles for information:
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

Is it possible to install CC on a new computer instead the old one?

If I already installed CC on one desktop and one laptop an I bought a new desktop instead the old one, Can I remove CC from the old computer an install it on the new one?
Thanks.

Hans-Günter,
Sign In (Cloud) = Activate (Creative Suites)
Sign Out (Cloud) = Deactivate (Creative Suites)
Same process, different terms.

Is it possible to install a sound Blaster X-FI at the same time as a EMU 1820 M on the same

Hi i need to isntall the both sound card on the same PC in order to take advantage to the music play, game enhancement of the X-Fi and also take advantage of the EMU 820m for music creation....
my question is :
is it posssible to install them at the same time if i have enough PCI slots remaining?
will it create some conflicts between the respectual drivers of the 2 cards?
Normally windows is able to have several sound card at the same time.. i already did it...
but i am afraid of drivers conflicts and some dll components conflicts...
thanks for you help
best regards,
show7

T-Storm, I'm having the same annoying delay on my X-Fi Extreme Gamer card, it's driving me nuts trying to fix it.
I noticed that if I un-tick the Dolbly Digital Li've in the console it goes away, along with the 5. sound, %$*&^^&%!
Is it he same with you? Try un-ticking the DDL while playing something and see if it stops the delay or not. At least it will see if the problem is the card, the connection, the optical cable, or DDL itself.
Dolby Digital Li've works in real-time so I fear that is causing the delay rather then a bad cable or connection. But I don't know if others are getting the same delay or not, if it is DDL then everyone should be getting it.
But, if they are not trying to play a digital signal at the same time as a anolog one they might not notice it.

Is it possible to install a sound Blaster X-FI at the same time as a EMU 1820 M on the same PC?

Hi i need to isntall the both sound card on the same PC in order to take advantage to the music play, game enhancement of the X-Fi and also take advantage of the EMU 1820m for music creation....
my question is :
is it posssible to install them at the same time if i have enough PCI slots remaining?
will it create some conflicts between the respectual drivers of the 2 cards?
Normally windows is able to have several sound card at the same time.. i already did it...
but i am afraid of drivers conflicts and some dll components conflicts...
thanks for you help
best regards,
show7

T-Storm, I'm having the same annoying delay on my X-Fi Extreme Gamer card, it's driving me nuts trying to fix it.
I noticed that if I un-tick the Dolbly Digital Li've in the console it goes away, along with the 5. sound, %$*&^^&%!
Is it he same with you? Try un-ticking the DDL while playing something and see if it stops the delay or not. At least it will see if the problem is the card, the connection, the optical cable, or DDL itself.
Dolby Digital Li've works in real-time so I fear that is causing the delay rather then a bad cable or connection. But I don't know if others are getting the same delay or not, if it is DDL then everyone should be getting it.
But, if they are not trying to play a digital signal at the same time as a anolog one they might not notice it.

How can I install multiple versions of Firfox, and block the older versions from updating while allowing one version to continue updating?

I need to have several versions of FF installed for training and testing purposes, but I can't keep older versions from updating. All versions will auto-update regardless of setting auto-update to off or suggest.

hello miklewis, you can try to use portable versions of older versions of the browser & set them to not update (those are not provided by mozilla directly): http://sourceforge.net/projects/portableapps/files/Mozilla%20Firefox%2C%20Portable%20Ed./

Is it possible to add multiple iPhone 6's tonight using the Edge program?

I want to add several new iPhone 6 lines to my account tonight using the Edge program, but it seems to only allow one phone to be added this way. Is it at all possible to do this online or will I need to go in store to accomplish this (and possibly miss out on getting in on the initial release)?

Great question paulterp. We currently don't have information regarding this phone and the Edge program. I'm sorry. We wont have more information until the 12th. Please stay updated here http://bit.ly/n5snpq .
KinquanaH_VZW
Follow us on Twitter @vzwsupport

Export one frame from the source - PP cs4

Hi
I the older version of Premiere , it was possibel til export a frame to fileformat as jpg, bmp and more, but how can I do this in PP CS4 ??

One little tip, with this process in CS4.1: In earlier versions, one had the option of also Importing that still into a Project. That function has been lost now. If you DO want your still into your Project, just make careful note of its location and name, and then Import it.
I did not like the Import into Project being the default, but I also liked to have the option to do it, if needed. Maybe CS4.2, or CS5 will add the option back?
Good luck,
Hunt

Is it possible to install multiple Password Export Servers (PES) in the source domain?

Similar Messages

Maybe you are looking for