Is it possible to install Oracle 11gR2 on a Win 7 64b Home edition comp?

If so how can I? If not, why? Frustrating

Windows Home versions are not certified for Oracle installs - so, no you cannot.
You have two options
1. Upgrade to a supported OS listed in the Install Guide - http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
2. Install VM software (such as VirtualBox, free install from http://www.virtualbox.org), then download and install Oracle Linux 5.7 (free from http://linux.oracle.com) in the VM, then install 11gR2 in the Linux VM (Install Guide at http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=)
HTH
Srini

Similar Messages

Is it Possible to install oracle 9i 32 bit on Sun Solaris Intel Edition

Dear OTN Members ,
It is possible to install ORACLE 9I Sun SPARC Solaris (32 Bit) on
Sun Solaris Intel Editon 2.8 . Please inform me on
email :-
[email protected]
[email protected]
Thanking You
Piyush Patel
- Server name :- pi.com
- Filename
- Date/Time
- Browser + Version : Netscape 4.7
- O/S + Version : Sun Solaris Intel Edition 2.8

857211 wrote:
I just need some advice on installing oracle 11gWhat part/product of "oracle 11g" exactly?
Installation Guides should be clear enough, if read. Also read Release Notes for additional support/unsupport info.
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
http://docs.oracle.com/cd/E11882_01/install.112/e24187/pre_install.htm
However the Installation Guide for Database Client adds:
"Note: Oracle provides 32-bit (Windows x86) and 64-bit (Windows x64) versions of Oracle Database Client. _Oracle certifies 32-bit Oracle Database Client on Windows x64_." (underline added)

Installing Oracle 11gR2 32bit on Win 2003 R2 server virtualized in Hyper-v

I have here 2008 server 64bit with Hyper-V and inside the virtualized server 2003 R2 32bit to install oracle!!
The installation goes normal but in the end when you create the database the following message appears:
ORA-03113 end-of-file on communication channel error
or
ORA-12560: TNS: protocol adapter error
These machines are all in domain
Hyper-V with 3 GB
Logged in with administrator privileges
NONE put in the file sqlnet.ora
Forgot something?
Can anyone help?
Thanks

Thank Madrid
I'm using DBCA tool!
It is the moment of creation of database errors that occur!
Looking at the documentation under +'Check the Software Requirements'+
Note: Check My Oracle Support (formerly OracleMetaLink) for more information about Hyper-V support
Is it so complicated to install oracle in Hyper-V?
Is there anything else that might help?
Thanks

Is it possible to install Oracle RAC (11gR2)on server having just one NIC ?

Hi all,
Please let me know if it is possible to install Oracle RAC (11gR2) on server having just one NIC card on linux (RHEL5.8).
by creating a virtual NIC like the real ethernet is etho and we are creating eht0:1 as virtual NIC, and i want to use this as eth1, so please suggest me if this is the workaround for my issue or not.... if not please suggest me the best way to install RAC on physical linux box running with one NIC card.
Thanks
@ble

Check if this thread is relevant
Single NIC card and RAC ???
Thanks,
Ajay More
http://www.moreajays.com

Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto

h2. Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Version: B
Author: Dude, 24. May 2011
The following are step by step instructions how to install Oracle 11gR2 Express Edition (Beta) under Linux Ubuntu 11.04, 64-bit.
Access to the Internet is required.
The instructions cover the following additional topics:
- Converting Red Hat based Oracle XE installer to Ubuntu.
- Work-around for missing /sbin/chkconfig tool.
- Install Oracle XE into a different directory or disk volume.
- Relocate and configure the Oracle user and default login directory.
- Uninstall, reconfigure and perform first database backup.
- Notes and web links.
- Troubleshooting
h3. A) System Setup and Prerequisites
h4. A.1. System Access
You will need terminal command line, root and system console access to perform the setup tasks.
To open a Terminal at the system console:
Menu Applications > Accessories > TerminalThe following commands will enable remote ssh login with root access:
sudo apt-get install openssh-server
sudo passwd root
Verify:
ssh root@xe_server_host_nameh4. A.2. Software Prerequisites
The following is required in order to install Oracle 11gR2 XE:
sudo apt-get install alien libaio1 unixodbcThe following is not required, but it will fix backspace and arrow keys in case you prefer using the vi-editor:
sudo apt-get install vimh4. A.3. System Swap space
Minimum swap space required is 2 GB. You can increase swap space if necessary using a swap file:
To analyze current swap space and memory configuration:
sudo cat /proc/meminfo
To install a 1 GB swapfile named swapfile in /, for example:
sudo dd if=/dev/zero of=/swapfile bs=1024 count=1048576
(this may take a while)
sudo mkswap /swapfile
sudo swapon /swapfile
sudo cp /etc/fstab /etc/fstab.orig
sudo echo '/swapfile swap swap defaults 0 0' >> /etc/fstab
Verify:
sudo swapon -a
sudo swapon -sh4. A.4. Kernel Parameters
Oracle 11g XE requires the following additional kernel parameters:
sudo nano /etc/sysctl.d/60-oracle.conf
(Enter the following)
# Oracle 11g XE kernel parameters
fs.file-max=6815744
net.ipv4.ip_local_port_range=9000 65000
kernel.sem=250 32000 100 128
kernel.shmmax=536870912
(Save the file)
Note: kernel.shmmax = max possible value, e.g. size of physical RAM.
Verify: sudo cat /etc/sysctl.d/60-oracle.conf
Load new kernel parameters:
sudo service procps start
Verify:
sudo sysctl -q fs.file-max
-> fs.file-max = 6815744h4. A.5. Oracle Installation Directory
The current Oracle Installation Guide uses the same directory like in previous versions: /usr/lib/oracle/xe/app/oracle/product/11.2.0/server. However, the current Beta installation uses Oracle Flexible Architecture (OFA) and installs into /u01/app/oracle/product/11.2.0/xe. Due to size limitations of Oracle XE it may not be necessary to store the installation to a specific directory or separate volume, but it is possible:
Install Oracle XE to separate disk volume:
From the system console menu: System > Administration > Disk Utility
Select "ext3" filesystem for Oracle compatibility and specify a Volume label, e.g. Oracle.
Notice the device name e.g. /dev/sdb
Get the drive UUID:
sudo blkid
e.g. /dev/sdb: UUID="d19a2d8f-da43-4802-8bdb-0703c855e23a"
Modify /etc/fstab to automatically mount the volume at system startup:
sudo cp /etc/fstab /etc/fstab.original
sudo nano /etc/fstab
(Add the following, using determined UUID, for exmple)
UUID=d19a2d8f-da43-4802-8bdb-0703c855e23a /u01 ext3 defaults,errors=remount-ro 0 1
(Save the file)
Create the mount-point, mount the new volume and set ownership and privileges:
sudo mkdir /u01
sudo mount -a
sudo chown root:root /u01
sudo chmod 755 /u01
Verify:
df -h
or restart the systemYou can also install Oracle XE into a specific directory:
Create a symbolic link to store the installation into an existing directory, for instance:
sudo mkdir /home/oracle-xe
sudo ln -s /home/oracle-xe /u01h3. C) Oracle 11g XE Download and Installation
h4. C.1. Download and convert the Installer from Red Hat to Ubuntu
Please see section E.3. to download the Oracle 11gR2 XE installer.
Select the version listed for Linux x64.
sudo unzip linux.x64_11gR2_OracleXE.zip
sudo alien --to-deb --scripts oracle-xe-11.2.0-0.5.x86_64.rpm
(This may take a while)h4. C.2. Create a special chkconfig script
The Red Hat based installer of Oracle XE 11gR2 beta relies on +/sbin/chkconfig+, which is not used in Ubuntu. The chkconfig package available for the current version of Ubuntu produces errors and my not be safe to use. Below is a simple trick to get around the problem and install Oracle XE successfully:
Create /sbin/chconfig:
sudo nano /sbin/chkconfig
(Cut and paste the following)
#!/bin/bash
# Oracle 11gR2 XE installer chkconfig hack for Debian by Dude
file=/etc/init.d/oracle-xe
if [[ ! `tail -n1 $file | grep INIT` ]]; then
   echo >> $file
   echo '### BEGIN INIT INFO' >> $file
   echo '# Provides:             OracleXE' >> $file
   echo '# Required-Start:       $remote_fs $syslog' >> $file
   echo '# Required-Stop:        $remote_fs $syslog' >> $file
   echo '# Default-Start:        2 3 4 5' >> $file
   echo '# Default-Stop:         0 1 6' >> $file
   echo '# Short-Description:    Oracle 11g Express Edition' >> $file
   echo '### END INIT INFO' >> $file
fi
update-rc.d oracle-xe defaults 80 01
(Save the file)
Set appropriate execute privileges:
chmod 755 /sbin/chkconfig
Note: You should remove the /sbin/chkconfig file after successful installation of Oracle XE.
h4. C.3. Install and configure Oracle XE
sudo dpkg --install ./oracle-xe_11.2.0-1.5_amd64.deb
/etc/init.d/oracle-xe configure
(This will take a while)
Remove the /sbin/chkconfig script, which is no longer needed.
sudo rm /sbin/chkconfigh4. C.4. Relocate and Configure the Oracle user login
The Oracle XE installer specifies /u01/app/oracle as the login directory for the Oracle user. Although not really necessary, the following will relocate the Oracle user $HOME to a standard location and create standard /etc/skel login files:
Exit all Oracle user sessions:
sudo /etc/init.d/oracle-xe stop
sudo kill -9 `ps -ef | grep oracle | grep -v grep | awk '{print $2}'`
sudo userdel oracle
sudo useradd -s /bin/bash -G dba -g dba -m oracle
sudo passwd oracle
Verify:
sudo id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba)h4. C.5. Setup Oracle environment variables
In order to use sqlplus and other tools, the Oracle account requires certain environment variables. The following will set these variables automatically at every interactive Oracle login:
sudo echo '. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh' >> /home/oracle/.bashrch4. C.6. Oracle sudo root access
It is not essential to allow the Oracle user to use sudo, but it is convenient:
usermod -G admin oracle
Verify:
id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba),120(admin)
sudo su -
-> Enter Oracle account passwordh4. C.7. Oracle 11g XE Post-installation
After you install Oracle Database XE, its graphical user interface is only available from the local server, but not remotely.
The following will correct the problem if necessary:
Login as user Oracle or use:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following command:
EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
exith3. D) Unintstall, Reconfigure and Troubleshooting
h4. D.1. Uninstall Oracle 11g XE
The following will completely uninstall and remove Oracle 11g XE:
Login as user root:
sudo su -
/etc/init.d/oracle-xe stop
dpkg --purge oracle-xe
rm -r /u01/app
rm /etc/default/oracle-xe
update-rc.d -f oracle-xe removeh4. D.2. Reconfigure Oracle 11g XE
Type the following in a terminal window:
/etc/init.d/oracle-xe stop
sudo rm /etc/default/oracle-xe
/etc/init.d/oracle-xe configureh4. D.3. Enable Archivelog mode and perform a database backup
Login as user Oracle:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following commands:
shutdown immediate
startup mount
alter database archivelog;
alter database open;
exit
Login to system console of the Oracle user account:
Select Applications > Oracle Database 11g Express Edition > Backup Databaseh3. E) Notes
h4. E.1. Oracle 11g XE limitiations overview
- It will consume, at most, processing resources equivalent to one CPU.
- Only one installation of Oracle Database XE can be performed on a single computer.
- The maximum amount of user data in an Oracle Database XE database cannot exceed 11 GB.
- The maximum amount of RAM that Oracle XE uses cannot exceed 1 GB, even if more is available.
- HTTPS is not supported natively with the HTTP listener built into Oracle Database XE.
h4. E.2. Documentation and Links
Official documentation for Oracle 11gR2 XE can be found at:
http://www.oracle.com/pls/xe112/homepage
h4. E.3. Oracle 11g XE downloads
The Installer is available from the Oracle Technology Network at:
http://www.oracle.com/technology/products/database/xe
http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
h4. E.4 APEX links and archives
The APEX archives can be found at:
http://www.oracle.com/technetwork/developer-tools/apex/application-express/all-archives-099381.html
The APEX download site is:
http://www.oracle.com/technetwork/developer-tools/apex/downloads/index.html
h3. F) Troubleshooting
... in progress
Regards and best of luck!
Edited by: Dude on May 25, Version B: various corrections. chkconfig package (A.2.) not required.

even though I am admin user.Admin user is a MS Windows term, that does not apply to Linux or Unix in the same fashion.
The configuration script tells you "You must be root user to run the configure script. Login as root user and
then run the configure script."
This is most likely correct because your account is not root and does not have UID 0. What you can do is to login as root e.g. sudo su -, as the message suggest, or use "sudo /etc/init.d/oracle-xe configure", provided your account is defined in the /etc/sudoers file to perform root/admin actions.
Btw, do not modify /etc/passwd and /etc/group to give you admin privileges or try to create a another root account under a different name. That's not the way it works and usually leads to nasty problems.

Is it possible to Install Oracle Linux 6.2 64-bit in Itanium Server?

Hi Gurus,
I have 2 intel Itenium servers of same configuration. I like to install Oracle Linux 6.2 64-bit in both Itanium Servers and Install Oracle 11gr2 RAC there. I have installed OEL 6.2 64-bit in x86-64 architecture server and installed Oracle 11gr2 there, but never done that in Itenium servers. Now I am confused if it is possible. To know the answer is very important for me and earlier the better.
Regards
Hasan Al Mamun
Systems Analyst
Bangladesh Bank
Dhaka, Bangladesh.

HasanAlMamun wrote:
I have 2 intel Itenium servers of same configuration. I like to install Oracle Linux 6.2 64-bit in both Itanium Servers and Install Oracle 11gr2 RAC there. I have installed OEL 6.2 64-bit in x86-64 architecture server and installed Oracle 11gr2 there, but never done that in Itenium servers. Now I am confused if it is possible. To know the answer is very important for me and earlier the better.It's not possible. We do not provide Oracle Linux 6 for Itanium.

Install Oracle 11gr2 on Windows 2008 R2 with ASM step by step Guide needed

Hi,
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.
Thanks in advance.
Sujith

Hi Sujith;
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.You need to install grid first(Software only) its neccessary for ASM, Than you need to use asmca to create asm disks than you need to install 11gr2
All doc avaliable at:
http://www.oracle.com/pls/db112/homepage
Regard
Helios

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7. If possible, Kindly provide me the website link.

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
If possible, Kindly provide me the website link.

Pl do not post duplicates
Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
Continue the discussions in your original threads

Is it possible to install oracle 11g 32 bit in windows 7 64 bit?

I just need some advice on installing oracle 11g 32 bit on windows 7 64 bit.
If its possible to install oracle 11g 32 bit on 64 bit please let me know how.
Thanks

857211 wrote:
I just need some advice on installing oracle 11gWhat part/product of "oracle 11g" exactly?
Installation Guides should be clear enough, if read. Also read Release Notes for additional support/unsupport info.
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
http://docs.oracle.com/cd/E11882_01/install.112/e24187/pre_install.htm
However the Installation Guide for Database Client adds:
"Note: Oracle provides 32-bit (Windows x86) and 64-bit (Windows x64) versions of Oracle Database Client. _Oracle certifies 32-bit Oracle Database Client on Windows x64_." (underline added)

How to install Oracle 11gR2 on Windows 7

Hi friend;
There are many questions about *"how we can make instalaltion on win7"*. Thatswhy i made one video tutorial which is mention *"How to install Oracle 11gR2 on Windows 7*
Its avaliable at my blog:
*http://heliosguneserol.wordpress.com/*
Hope it helps who need to make this installation
Regard
Helios

This question is not related to the Database Migration Assistant for Unicode (DMU). Please, post your question to one of the more appropriate forums, for example:
General Database Discussions
Database Installation
-- Sergiusz

Possible to install Oracle EBS R12 on existing (shell) Oracle 11.1.0.7 DB?

Is it possible to install Oracle EBS R12 on existing (shell) Oracle 11.1.0.7 DB?

user4434301 wrote:
OK...I could be crazy, but I didn't see doing an installation of EBS R12 on a pre-existing 11.1.0.7 DB in there anywhere. It looked like the regular install directions. Are you sure?If you mean to say if you can install R12 with an existing EBS/standalone database then the answer is No.
If you mean to say if you can lay down R12 software (to upgrade from 11i) with an existing EBS database then the answer is Yes.
I hope it is clean now.
Thanks,
Hussein

Getting Problem installing Oracle 11gR2 on Windows 7 x64

Hello everyone,
beforhand thank you for helping a rookie. :-)
I getting an error message that my installation path contains empty spaces. C:\Program Files\....
In previous Releases of Oracle you could cancel these error message. Not in 11gR2.
Does anyone know a solution to install Oracle 11gR2 Client in the Windows Program Files (x86) / Program Files folder?
I modified the *.rsp File line "Complete path of the Oracle Home" with double quotes like in the previous Versions.
tried the environment variable "%...%" and also the DOS writing style "PROGRA~2".
Oracle takes over the complete notation.
Iam Working on a Windows 7 64 Bit Machine with an english Kernel.
Have to install: Oracle Client 11gR2 64 bit
Thank you in advance.
Best regards

Was there ever any thoughts on this issue? I'm using Oracle 11G R1 and it lets me cancel past errors saying I can't install to c:\program files\oracle because it has spaces and the programs I use also work perfectly fine.
Now, we're using Win 7, thus want to use Oracle 11G R2 so it won't fail OS checks and why not use the newest, right? Well, as stated here, you cannot cancel past "space" error any longer. I was going to try %programfiles% but it appears that that won't work; LAME!
Also, the runtime install for R2 says it's going to be 200MB more than the runtime install for R1, why would that be the case? That's a LOT more!
Thanks, Nick

Installing Oracle 11gR2 RAC issue

I am installing Oracle 11gR2(11.2.0.3) RAC on RHEL 5.6. I am facing "TCP connectivity check failed" on my precheck using CVU
Interface information for node "hublpr4"
Name   IP Address      Subnet          Gateway         Def. Gateway    HW Address        MTU
eth0   172.16.34.71    172.16.32.0     0.0.0.0         172.16.32.4     00:17:A4:77:08:10 1500
eth1   192.168.10.3    192.168.10.0    0.0.0.0         172.16.32.4     00:17:A4:77:08:12 1500
Interface information for node "hublpr3"
Name   IP Address      Subnet          Gateway         Def. Gateway    HW Address        MTU
eth0   172.16.34.69    172.16.32.0     0.0.0.0         172.16.32.4     00:17:A4:77:0C:30 1500
eth1   192.168.10.2    192.168.10.0    0.0.0.0         172.16.32.4     00:17:A4:77:0C:32 1500
Check: Node connectivity of subnet "172.16.32.0"
Source                          Destination                     Connected?
hublpr4[172.16.34.71]           hublpr3[172.16.34.69]           yes
Result: Node connectivity passed for subnet "172.16.32.0" with node(s) hublpr4,hublpr3
Check: TCP connectivity of subnet "172.16.32.0"
Source                          Destination                     Connected?
hublpr3:172.16.34.69            hublpr4:172.16.34.71            failed
ERROR:
PRVF-7617 : Node connectivity between "hublpr3 : 172.16.34.69" and "hublpr4 : 172.16.34.71" failed
Result: TCP connectivity check failed for subnet "172.16.32.0"
Check: Node connectivity of subnet "192.168.10.0"
Source                          Destination                     Connected?
hublpr4[192.168.10.3]           hublpr3[192.168.10.2]           yes
Result: Node connectivity passed for subnet "192.168.10.0" with node(s) hublpr4,hublpr3
Check: TCP connectivity of subnet "192.168.10.0"
Source                          Destination                     Connected?
hublpr3:192.168.10.2            hublpr4:192.168.10.3            failed
ERROR:
PRVF-7617 : Node connectivity between "hublpr3 : 192.168.10.2" and "hublpr4 : 192.168.10.3" failed
Result: TCP connectivity check failed for subnet "192.168.10.0"
Interfaces found on subnet "172.16.32.0" that are likely candidates for VIP are:
hublpr4 eth0:172.16.34.71
hublpr3 eth0:172.16.34.69
WARNING:
Could not find a suitable set of interfaces for the private interconnect
Checking subnet mask consistency...
Subnet mask consistency check passed for subnet "172.16.32.0".
Subnet mask consistency check passed for subnet "192.168.10.0".
Subnet mask consistency check passed.
Result: Node connectivity check failed
Checking multicast communication...
Checking subnet "172.16.32.0" for multicast communication with multicast group "230.0.1.0"...
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
Checking subnet "172.16.32.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
Checking subnet "192.168.10.0" for multicast communication with multicast group "230.0.1.0"...
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.2" on node "hublpr3"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.2" on node "hublpr3"
Checking subnet "192.168.10.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.2" on node "hublpr3"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.2" on node "hublpr3"

Try following metalink note for sorting out multicast issues.
Oracle Grid Infrastructure 11.2.0.2 Installation or Upgrade may fail due to Multicasting Requirement [ID 1212703.1]

ASM configureation while installing oracle 11gR2 db

hi all,
I want to install oracle 11gr2 with ASM on windows 7.
can any one tell me how to install step by step?
Thanks and Regards,
Vikash (junior DBA)

This question is not related to the Database Migration Assistant for Unicode (DMU). Please, post your question to one of the more appropriate forums, for example:
General Database Discussions
Database Installation
-- Sergiusz

Is it possible to install Oracle 9i and SQL server on same machine

1. Is it possible to install Oracle 9i and SQL server on same machine ?
2. If yes, what are the problems i may encounter during installation
3. What should be hardware configuration for installing both databases in same machine like hard disk space, RAM speed etc,

Hi,
1. Yes you can do it.
2. There shouldn't be any problems
3. Depends on your needs
Jarek

Is it possible to install Oracle 11gR2 on a Win 7 64b Home edition comp?

Similar Messages

Maybe you are looking for