Is it possible to install OSX on another computer via Target disk mode?

Hey there...
a friend of mine has an older iBook. the drive on this iBook is broken (snapped off) so there's no way of using it.
is it possible to install OS Panther from another computer (use OS X panther install running on a MacBook, or G4) targeting the iBook via Target Disk mode?
thanks!
-

Hello Again SCHPiLKAS!
As roam posted, you cannot use the Intel MacBook install discs, on the PPC iBook.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
If the iBook meets the Panther System Requirements, and the Additional Panther System Requirements, and you have a Full Retail Version, of the Panther Install CDs, you can use Firewire Target Disk Mode, to install the system.
The Panther discs should look, exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
ali b

Similar Messages

Need Help Installing Snow Leopard onto a blank HD via Target Disk Mode

Hey everyone.
Recently I had the HD on my Black Macbook crash due to a mechanical failure. I have just purchased a new Hard Drive for my Macbook. It is completely blank other than the fact that I connected it to my girlfriend's White Macbook earlier today to create 2 partitions. I have a new copy of Snow Leopard that I want to install on it and was hoping someone could guide me through the process.
What I have with me as of now is:
One Black Macbook (UK bought) w/ Partitioned Blank HD and a non-functional Superdrive
One White Macbook (US bought) running Tiger w/ working Superdrive that mounts the SL DVD
FireWire Cable
New Snow Leopard DVD
My first attempt at this failed. I connected the two Macs with the FW cable and started up the Black Macbook in Target Disk mode. Both my HD partitions showed up on the White Macbook. I inserted the SL DVD into the White Macbook and when it mounted I clicked on install. Of course, now it thinks that I want to install SL on the White Macbook whereas I want to install it on the Black Macbook.
I'm a college student without a working computer and with my finals coming up, I'm in deep trouble. I want to mention that my Black Macbook's Superdrive spits out _everything except for Movie DVDs and My Leopard Startup Disk._ It spins the SL DVD for a few seconds and spits it out as well. I'm wondering whether this might be an issue with the DVD region code on the SL DVD though I don't think that's it. My region code is currently set to Region 1 (US) where I purchased the Snow Leopard DVD off Amazon. I initially thought there was a problem with the DVD and CD lens in the drive and I bought a DVD/CD Lens Cleaner CD but I can't run it because the Superdrive spits that out too. I'm out of warranty on the Black Macbook so fixing the Superdrive is pretty much out of the question. I was under the impression that I would be able to install SL via Target Disk Mode without any hassles but boy was I ever so wrong.
Is there any way that I can do this? I'm hoping someone here can help me out. Please do if you find the time to.

By other computer, do you mean the White Macbook? So I should basically put the SL DVD in the White Macbook, restart with the C key held down? Is that right?
Please pardon me if I'm being stupid.

Installing Leopard from a PowerPC mac to an Intel mac via Target Disk mode

I've just purchased Leopard, but thanks to the common and very annoying faulty MacBook Pro disk drive, I cannot even read the DVD, much less install from it. Before, the disk drive error never affected purchased DVDs, only the ability to read and burn to empty DVDs, but now, apparently, I can't even read Apples own disks.
As the new system disk is Universal, would it be possible to start the installer form the cd on my sister's PowerPC mac (12' Powerbook), and install the system on my MacBook Pro's harddrive, mounted as a firewire drive, or would the installer automatically choose the PowerPC version, since it is launched on a PowerPC computer?
And, if so, is there any way to tell the installer to install the Intel version of Leopard if I run it on a PowerPC computer?

well, looks like I'll have to install Leopard through the Firewire Target Disk mode as my MacBook can't read the DVD. I would appreciate if someone could review the steps below to let me know if I am on the right track. The MacBook is the computer on which I want to load 10.5 and the iMac G5 (PowerPC chip) is the computer on which I will insert the DVD.
- First question: Am I correct (see above) in saying that the MacBook is the Target computer?
- Insert DVD in Host computer
- Connect Target to Host using FW cable
- Turn on Target computer press and hold T to launch in target mode
- select DVD drive from disk options
- this is where I get fuzzy, would I simply click the Install icon? And then what? Will the MacBook know to reboot in Target Mode or do I have to hold down T again?
- anything else I am missing?
Thanks.

Installing OS X on older laptop via Target Disk Mode.

I've got a PowerBook G4 15" with a broken optical drive. It only has OS X 10.2 and OS 9, so we wish it could have tiger. I was wondering if I could use my macbook and a firewire cable with the powerbook to install from target disk mode.

Ah, so you mean use the MacBook as, essentially, an external DVD drive? Good idea; I was getting dismayed as the only PPC macs I have around are
-an iBook G3 with the entire top half ripped off (works though, great media center through VNC)
-the aforementioned Titatium powerbook 15"
-a smaller Aluminum powerbook 12" with a working DVD drive, but there's a DVD that refuses to eject inside it. It reads fine, but the case survived a mighty fall (before it was ours) so it can't eject.

Installing in Firewire Target Disk mode

I know this is a kind of silly question, but is it advisable to install OS X on my iMac when it's booted into Firewire Target disk mode? I mean, would it get funky stuff in there that the iMac doesn't need if i install from, say, my PowerMac? I know it's quite possible to do this, as I used to do it when I had two identical iMacs. But those were, of course, identical, so the target machine had the same specs as the one that was installing.
Any thoughts?
Oh, and let me say a quick "hi" to all the regulars. I haven't really been on this baord too much the past year or so. Who's still around?

Hi, Trey.
I installed Tiger via Target Disk Mode, but my G3 has been having kernel panics in the couple weeks since the upgrade. On another post someone said that they'd heard that the Target Disc Mode can be a problem. So I'm checking the posts to find out more.
My G3 has a CD-R/W drive, so I didn't have an alternative, other than to buy an external drive, or to send Apple my commercial Tiger DVDs and pay them MORE to convert it to CDs. I just paid big bucks for the G5 a month before they came out with a cheaper upgraded version, which I am unhappy about. Of course those Tiger disks are for G5 ONLY, so I couldn't install to my G3 from them, so I coughed up the cash for the DVDs. I couldn't fathom giving them even more for a CD transfer.
Of course, if the G3 keeps crashing, and I hear from others that a direct install from CD may cure the problem, what choice will I have? As much as I've loved Apple over the years, there's starting to be a more corporate (and dare I say it, Gates-like) vibe from their method of doing business. Now the kid wants an iPod for Christmas, and I have to check those boards to see how they're performing. As helpful and fun as all this technology is, it is also quite stress-inducing...
Good luck with your upgrade! --kat
iMac G5 20" (ALS); 2G RAM | iMac G3 500MHz slot-load CD-R/W CRT; 1G RAM Mac OS X (10.4.3) Using Apple since IIe, and Macs since 1984
iMac G5 20" (ALS); 2G RAM | iMac G3 500MHz; slot-load CD-RW; 1G RAM Mac OS X (10.4.3) Using Apple since IIe, and Macs since 1984

Installing over Target Disk Mode using Grey (OEM-type) Discs

I have a set of Tiger grey install discs labeled for use with a Power Mac G5. I would like to use them to upgrade our eMac, but they obviously don't allow this. I have some family who own a G5, and was wondering if it would be possible to connect the eMac to their computer under Target Disk Mode, then install on the eMac by running the installation on the G5. Anyone have any experience trying something smilar?
I know some will probably say doing this would be a violation of the EULA, but I have looked through the license agreement that came with the discs and haven't seen anything that would prohibit such an installation. It is my understanding that starting with version 10.4.4 of OS X, Apple added a clause to the EULA stating that the grey install discs were only permitted for use with the computer they originally shipped with, but prior to this there were no such prohibitions (these discs are labelled as version 10.4.2).
Thanks for any help

Hi sjpetrick, and a warm welcome to the forums!
Physically that would work to install, BUT whether the iMac will Boot/Run thinking it's a G5 is questionable, and even if it does boot, It won't have some needed drivers for the eMac.

Unable to Install via Firewire Target Disk Mode

I'm having problems with installing Leopard 10.5 via Target Disk Mode. The 2 Macs I am using are a eMac 1.0GHz with 1GB RAM Running OS X 10.4.11 and a PowerMac QuickSilver 933MHz 896MB RAM Running OS X Server 10.4.11.
The eMac's Combo Drive has gone south and won't read DVDs so I am putting the install DVD into the QuickSilver. If I start the QuickSilver in Target Mode I only see the QuickSilver's harddrive on the eMac and can't access the install DVD. If I put the eMac in Target Mode and boot up the QuickSilver using the Install DVD after I get through the language selection it says the QuickSilver isn't capable of installing it.
Any suggestions would be helpful.
Thanks

Then, you're out of luck if the QS can't run Leopard. My G4 does. You might look at
http://www.macosxhints.com/article.php?story=20071214143723301
http://www.tidbits.com/webx?14@@.3cb6ddd5/5 and
http://forums.macrumors.com/showthread.php?t=371302
to see how you can work around it. Alternatively, use another machine or ext burner to boot the eMac with the DVD. With the QS in TDM, only the master disk is available.

Instal OS 10.4 trough target disk mode

Hello, this is my first question here.
I am trying to install os 10.4 on a computer with no DVD player using the target disk mode as described in de apple website. I have connected a computer with DVD player in target mode to the computer with only te cd player, but only the hard disk of the computer in target disk mode appears on the desktop, not the DVD
Is the any way to get this to appear?
Thanks

Welcome to Apple Discussions!
Make sure you are using the Tiger retail disc which looks like this picture
It doesn't always work right, and if you have trouble, I strongly recommend getting an external DVD drive that can boot Mac OS X such as those sold by http://www.macsales.com/ or http://www.lacie.com/ or get the Tiger Media Exchange program that gives you CD version on http://www.apple.com/befr/macosx/mediaexchange/

Is it possible to install leopard on another user account on the same computer?

Is it possible to install leopard on another user account on the same computer?

I think you mean "partition."
Petition:
a formally drawn request, often bearing the names of a number of those making the request, that is addressed to a person or group of persons in authority or power, soliciting some favor, right, mercy, or other benefit: a petition forclemency; a petition for the repeal of an unfair law.

My computer crashed. I tried installing Elements on another computer and I get 'limit reached'.

My computer crashed. I tried installing Elements on another computer and I get 'limit reached'.

You need to contact support directly for activation/deactivation and other installation issues. It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. You will need your serial number. If an agent is not immediately available, refresh the page a few times until you see the green chat button, or try at a later time.
To get help now click here for product support
Can’t get immediate help? click here for further options

How-To: Install Bundled Apps to another MacBook Pro using Target Disk Mode

Recently, I replaced the dead hard drive on my wife's computer. All the data was previously backed-up so all I needed to do was reinstall the original OS. Oops! Those disks disappeared over two years ago...perfect, right? No poblem, I already had the boxed install DVD for Snow Leopard and installed the core OS. But what about those bundled applications? Aha! That is the marketing coup Apple doesn't really talk much about. You see, you get the entire suite of Apple branded apps with the original install disks but not with a boxed OS install disk. It's just something that you have to find out for yourself...the hard way.
My requirement: restore all the iPhoto data to the reimaged machine running Snow Leopard. But that data has no application that can read it. Solution - Reinstall iPhoto from another source.
So I developed this workaround I hope the rest of you find amusingly simple, wildly helpful
Here's how I restored iPhoto on my wife's computer:
1) Get two Laptops side by side. In our case we both have macbook pro 2008 computers (Wife's and Mine)
2) Power both down and direct connect a firewire 400 cable (or 800 if you have it) between the two
3) Start the Wife's laptop in Target Disk Mode: Press "T" immediately after engagin the power button, hold it down until you see the "fanned" firewire symbol floating across a grey screen - it's quite large, about the size of your hand making a "stop" gesture
4) No start the Mine laptop by pressing the "option" key (two keys to the left of the space bar)
5) You will presented with a pair of hard disks to boot from, choose the Wife's laptop hard drive
5a) you'll notice now that the Mine laptop is booting the OS system files of the Wife's laptop (Her desktop, her preferences, etc...)
6) On the Mine laptop, insert the original Mac OS Install Disk (#1) that came with the Mine laptop (usually any OEM install disk will work, though)
7) Double-click on the DVD icon on the desktop when it mounts and look for a shortcut that reads, "Install Bundled Applications Only"...launch it
8) Now choose install bundled applications but make sure to press the "Customize" button in order to specifically choose which OEM software you want. In our case, just iPhoto
9) Follow the installer prompts all the through to completion and exit (you will be prompted to insert disk #2 along the way).
10) Remove the install disks, power down
11) Power down the Wife's laptop too
12) Disconnect the Firewire cables from both laptops
13) Power up the Wife's laptop normally
14) Launch the FInder and drill down to Applications. Look for iPhoto and launch it
15) iPhoto will either pickup the "iPhoto Library" that was previously restored after reimaging with Snow Leopard or you may be prompted to manually associate a library with iPhoto.
16) Once complete, you'll se all the restored pictures and data from when before the original hard drive crashed. Wife will be pleased and you'll look like a Genius
This is a really handy trick for troubleshooting a lot of install and restore related issues.
Hopefully you'll find other uses for it too.
Good Luck,
TheHighSierras

I think the problem is that you can't install an older OS X version onto a system running a newer OS X version. So I would try the following:
     1. have an external disk or create another partition on an internal drive to use for the Mountain Lion install (you might have to shrink an existing partition to make room for another)
     2. Create an external bootable USB thumb drive with the Mountain Lion OS on it (do a search on the web for this - for example see http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
     3. Reboot Yosemite and then boot from the USB thumb drive by holding down the option key
     4. run the mountain lion installer and install on the new disk/partition you created in step 1 - it will also create another recovery partition from this same part of the disk
Now your Mac system will have both a Mountain Lion install as well as the Yosemite install. You won't be able to use Migration Assistant to move things from Yosemite to Mountain Lion because it will see that you're "going backwards" and won't allow you to.
Have a good backup of everything before starting in case there are problems.
Good luck...

Moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can with be done with no OS/Hardware issues?

moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can with be done with no OS/Hardware issues?

babowa wrote:
Thanks; however, I was really referring to this: if it is preinstalled on a Mac, I believe the license is for that computer only (unlike an MAS purchased version which can be used on any Mac owned). Has that requirement changed?
At this moment, that's correct. The OS X license included with a Mac can only be used with that Mac. However, in the case the OP has purchased OS X Mountain Lion in the past, this may change

Moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can it be done with no OS/Hardware issues?

moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can it be done with no OS/Hardware issues?

When I work with a drive to boot many computers, I use the newest model computer I will be booting, and set the system up on that, run all the Apple updates. Normally I will have no issue booting any older computer with the same drive. Unless of course those older computers do not support the operating system on that drive.
If you want to test if the drive will boot the mac mini. Put your MacBook Pro into target mode. Connect the two computers together. And on the Mac Mini, go into system preferences and then under start up disk and see if the target disk mode computer's drive shows up there. Seelct that drive and restart. See if it boots ok. A bit easier then taking the drives out and moving things around.

How can I install Premiere in another computer

How can I install Premiere in another computer, if my main computer does not work. The service is paying monthly.

As far as I have understood it you can install PP on as many computers as you like, but only two can be active at the same time. So if you have installed it on just one computer you should have no problems installing it on a second one. If you want to install it on a third, you would have to deactivate one of the other previous installations to get it to run.

Install photoshop on another computer when i have lost the computer

I have Photoshop Elements 9 and I have installed it on two computers but one of them is not available, I can't reach it. So how can I get back my license from that computer when I don't have the computer with me? I want to install Photoshop on another computer.

Please see this thread
http://forums.adobe.com/thread/1146239?tstart=0

Is it possible to install OSX on another computer via Target disk mode?

Similar Messages

Maybe you are looking for