Is it possible to install other mac osx (tiger) with boot camp on lion?

Lion has pretty much made some of my other apps incompatible, so is there a way where I can run 2 OSXs in 1 computer?

Lion Mac OS X Communities
How to install Snow Leopard on a brand-new Lion-based Mac
How to keep Snow Leopard when upgrading to Lion
How to prepare your Mac for OS X 10.7 Lion
RoaringApps Mac OS X Lion Application Compatibility

Similar Messages

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and somehow it crashes the mac side peridoically. I am told I need to "clean" it and reinstall lion using the recovery drive. will that delete the windows partition too??

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and now the mac side crashes/freezes periodically, especially iphoto. I am told by the genius' that I probably need to "clean" it and reinstall lion using the "recovery drive" which resets everything back to default and reinstalls the lion operating system. My question is will this also delete the "windows" partition drive and all that data too. If so that will be a huge pain in the ___ to back up and reinstall boot camp and windows. I want to shoot the lion.

There is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that.

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

Which version of Windows XP (SP1, SP2, SP3?) can I install on Mac Pro 2011 using Boot camp

I am planning to install Microsoft XP on my Mac Pro 2011 using boot-camp. Since there are multiple versions available (Home, Professional, Pro with SP1, SP2, and SP3's etc…) I am finding hard to decide which one is the tested and best available option?
Also any other specific features to consider while purchasing this OS.
Please advise…

Gurleen80 wrote:
Thank you guys for your quick response.
However, I am not clear what you guys wanna say here, I simply want to know Which windows XP can I install on Macbook Pro (Laptop) using boot camp?
I will repeat what I already said given that you told us that you are running Lion on a newer MacBook Pro.
You should visit the Boot Camp forum https://discussions.apple.com/community/windows_software/boot_camp
And you should read the Boot Camp Help documents http://www.apple.com/support/bootcamp/
XP, regardless of version, is not going to work on a newer computer nor will it work if you are running Lion OS.

Is it possible to put another Mac Os x on boot camp

Dear all,
Is it possible to install on boot camp lower version of OS X(mountain lion), if I have Mavericks 10.9.4?

Lion Mac OS X Communities
How to install Snow Leopard on a brand-new Lion-based Mac
How to keep Snow Leopard when upgrading to Lion
How to prepare your Mac for OS X 10.7 Lion
RoaringApps Mac OS X Lion Application Compatibility

MANY issues after installing Windows XP Home Edition with Boot Camp

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: "This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?" When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: Some of these problems may not be specifically "Application" related, but the top one mainly is. (in my views)
~Twilight

Twilight:
Is it possible that you installed Windows XPSP1 instead of the required SP2? If yes then that is cause of all of your issues listed in your post. You have no sound and you cannot connect wirelessly because you still have been unable to install the boot camp drivers when you inserted the leopard disk.
Please double check to see which version of windows XP did you install. Remember, you need windows XPSP2 for all this to work.
Now, in the event that you installed XPSP1 then you will need to get to the microsoft windows site on a different computer and burn the Service Pack 2 for windows XP on a CD. After that boot your apple mac to XP side and insert the Service Pack 2 disk and install the pack. After that, it will ask you to restart the computer which you must and then once fully booted into XP then insert the leopard CD again and see if takes and installs all the necessary drivers.
Axel F.

Can't install Win 7 from USB with Boot Camp - please help

Hi,
I'm going crazy trying to install Win 7 from a USB using Boot Camp.
I've got a 13" MacBook (Aluminum) with 6GB RAM (trying to get to 8GB, but that's a different issue), 500GB HDD, running 10.7.4.
In the Boot Camp Assistant I want to partition 60GB for the Win 7 drive, but when I click install I get the error: "The installer disc could not be found. Insert your Windows installer disc and wait a few seconds for it to be recognized." However, the USB drive that I used Windows 7 USB/DVD Download Tool in Win XP to create is plugged in. I also have the .iso file on my Mac desktop.
Googling hasn't produced any solution that I can work - most seem to be using Boot Camp assistant 3.0, and I've got 4.0.3 running.
I'd appreciate help, particularly step-by-step instructions that I could follow.
Thanks in advance.

Lion has been out and most threads here deal with 10.7. and BCA 4.0.x
There are problems with burning ISO to DVD etc at anything other than slowest burn speed (2x)
New 2012 models don't have an internal DVD but if you do, then yours does not support a USB-DVD.
So you are running XP now and have Windows XP partition? knowing that the update will need 40GB and that Lion does not support XP.
Look at the other posts I made this morning for some of the FAQ Boot Camp support links.

Installing windows 7 on Mavericks with Boot Camp

Hey,
I'm having difficulties installing windows 7 on my 2008 mac pro. I'm running Mavericks. I'm trying to install windows 7 onto a extra internal SSD with the installer disc and bootcamp. The bootcamp assistant hangs as soon as I hit install. The screen goes black and freezes.
Any help would be appreciated.
thnx

Hey johnnydoit,
It sounds like you might be experiencing the symptoms from the following article:
Boot Camp: iMac displays a black screen during installation of Windows 7
http://support.apple.com/kb/TS3173
There are steps within to resolve the issue, I'd run through them and see if that helps.
Best,
Delgadoh

Can a mac running windows with Boot Camp be found by Find My iPhone

I'm running Windows on my MacBook Pro via BootCamp and I'm using the Find My iPhone iCloud app on my iPad. My MacBook Pro cannot be found by Find My iPhone, it's labeled as off-line, even though it's connected to the Internet.
So my question is this: is there a way for Find My iPhone to see my Mac while running Windows. Note, I've already got iCloud for Windows installed on the Windows side of my MacBook Pro (and Find My Mac turned on on the Mac side, and while on the Mac side, it's always found, no problem.)

ckuan wrote:
When you iPhone is not connected to the Internet either through 3G/Wi-fi or because it is off then you cannot track it.
If FindMyiPhone is enabled, even if the iPhone is off or not on wifi/3G, it will still show in FindMyiPhone under Devices, though it cannot be located.
If it is not showing No Devices, FindMyiPhone is not enabled.
If it does show in Devices and shows Offline, FindMyiPhone is enabled but it is off or not on wifi/3G.
This is one way to remove the activation lock if you do not have the device. Delete it from FindMyiPhone in iCloud.

Can I upgrade a Mac OSX 10.6.8 to Mountain Lion?

I want to know if It is possible to upgrade my Mac OSX 10.6.8 to mountain Lion..

I'd suggest you hold off for at least version 10.8.2 to come out. The first two, 10.8.0 and 10.8.1, have proven problematic in terms of battery performance for a significant number of users (see the corresponding thread reaching Biblical proportions in this forum).

Have Imac with boot camp windows 7. Sound works great in mac but no sound in windows?

I have new IMAC 24 with snow leopard os and installed windows 7 ultimate 32 with boot camp. The sound works great when in MAC but there is no sound when boot up in windows.The mixers show a sound level as music is plaing but no sound out of speakers or earphones. I read on forum that many others have had same situation with Mac Book Pros and had success by downloading new realtec audio drivers, but my system has Cirius 2406 ab9 drivers and I can't find any replacements for them. Does anyone have a fix?

Keep on trying, keep searching as there are quite a few work around's for different issues.
One way is to reinstall the Boot Camp drivers and update them again via the Apple Software Updater in Windows. You did update them the first time, right?
Or extract the sound drivers from the Boot Camp package (or the DVD if you have it) and just install those again. You should find a few how-to's in the search results.
Sorry I can't help more...

I install windows 8 via boot camp but its corrept so i recover this by the bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automaticly now its become a pc how can i install my mac osx again?

i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me

If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Installing Mac osX Tiger

Hi there my name is Taha and i am from Pakistan
I want to know if there is any possible chance of installing mac osx tiger into my pc i had recently bought the specification of the pc is Intel 2.66 core 2 duo with 2 gb ram 160 Gb hard disk and a 128 Mb graphics card
if not can you please give me the reason why it is not possible
Thank you

Hi Taha
Your question was asked and answered here.
Hypothetical question but why can't you install OSX on non Apple computers?

How do I re-install my Mac OSX Server from scratch

Hi,
I have purchased two MacMini Servers with 10.6 OSX Server software pre-installed.
I have changed the organization as our company name changed and run into license issues.
I want to re-install the Mac OSX Server software and start from scratch. How do I go about this. I tried yesterday for many hours to do so and the new installs are still running into duplicate license issues and other issues. What is the best approach to do re-install? I am willing to erase the internal Hard Disk and boot (with an external DVD optical drive) if that is the best way to go. What are the steps?
I have the original CDs or DVDs and have extra, external hard disks to do a Time Machine backup, etc.
Thanks,
Don

If you are looking to do a nuke and pave of the system, and you have an external optical drive, then yes, that is likely the most direct method. Connect the optical drive, insert the installation DVD, and reboot the system targeting the optical disk as the boot volume (you can do this by holding down the C key or the Option key during startup).
Now, if you do not have an optical drive, you can put the installation disk into another Mac running 10.6 and use the Remote Install Mac OS X application in your Utilities folder.
Hope this helps

When I am re-installing the Mac OSX snow leopard onto an older Mac I run into the window that says select the disk where you want to install Mac OSX but nothing is there to select

I am trying to re-install the Mac OSX snow leopard onto an older I mac with a new hard drive. I run into the "select the disk "where you want to install Mac OSX but there is nothing in the window to select. Any advice?

After you install a new hard drive, you need to boot to another drive to initialize it to MAC OS Extended (journaled) format and create the partition(s) on the drive. You do this using Disk Utility. Otherwise, the mac operating install process doesn't see a formatted disk to install to.

Is it possible to install other mac osx (tiger) with boot camp on lion?

Similar Messages

Maybe you are looking for