Is it possible to install two OSX`s on one internal hard drive?

I tried to make a new, 30GB free partition formatted in Mac OS Extended (Journaled), but I can`t install OS X 10.6 from my original DVD there. Says "Mac OS X can`t be installed on this computer". Why?

I thought about some solutions,but I don`t know if any of them is true.
1) The original OS X DVD recongizes, that it has been installed and not erased yet and it doesn`t allow second installation.
2) My MacBook has replaced internal hard drive because of an error. In an authorised Apple service they gave me a new one with preinstalled OSX. But I don`t think that OSX install DVD is matched with hard drive.
3) DVD is broken.
Please help.

Similar Messages

Is it possible to resize partitions on a write protected internal hard drive?

Hi everyone,
The internal hard drive on my computer has been created into two partitions, one for Mac (350 GB) and another for Windows (150 GB).
Since I rarely use Windows (only for one scientific application from CambridgeSoft), there are a lot of free space on Bootcamp (115 GB). So I would like to resize these partitions to make it the Mac partition maximized, like 450 GB, and 50 GB for Bootcamp.
And the problem is that I'm unable to do that by using Disk Utility, Stellar Management Partition, iPartition.
It says something about write protected (images below).
So are there any ways to undo the write protected or resize those partitions?
Another small question is why the total volume as seen in the second image (iPartition) is not 500 GB, but just 465 GB (50 + 415).
All comments or suggestions are highly appreciated. Thanks!
p.s. I'm the only user.

To resize a Bootcamp partition you must use Bootcamp Assistant to remove the partition then create a new Bootcamp partition, or, use a 3rd party tool such as CampTune.
If you use Disk Utilities you will mess up your hard drive and it will be necessary to erase, format, and reinstall OSx and Windows again. You will lose all your data in OSx and Windows if you try to use Disk Utility to resize a Bootcamp partition.
And, 50 GB is too small for Windows, especially if you install programs and create/use data. 100GB minimum wouls likely work.
Back up all your data before messing with partition changes.

Two very mobile laptops, one external hard drive, and iTunes?

I'm very sorry if this has been answered, but I've searched a lot and haven't quite found the precise question I'm asking...
My household has two iBooks (G3 and G4) wirelessly networked through an original Airport. Our music is completely digital, and we have no stereo. Each iBook has a different iTunes library. When we want to play the G3's music, we connect the G3 to a good set of speakers (pretending to be a stereo) through the mini jack. Same for the G4. This would be fine, except we're both running out of internal hard drive space.
So, what we want to do is buy one external hard drive, both store our music files on it, and play music. A new drive in the mid-range should tide us both over till we can afford new computers.
But this has raised a whole host of questions:
1. How do we share a hard drive when we both have laptops that move about the house all the time? Sometimes the G3 sits on the desk playing music while the G4 sits on the couch checking email, and vice versa.
2. Can we set up just one iTunes library on the hard drive that is fully accessible to whichever computer is connected to it, both in terms of playing and in terms of updating?
3. But wouldn't that be terrible, anyway, because I couldn't sit on the couch and download new music into my iTunes folder automatically?
4. And this leads to what I really, really, want, which is an external hard drive that is independently wirelessly accessible by both computers.
5. Which in turn leads to the true wishlist, which is to be able to use AirTunes too. Then I could sit anywhere, access a shared library on either computer, and then stream it to my stereo.
Is any of this possible? Am I missing the forest for the trees? Is there some big picture that I am just not seeing? I just want both computers to be mobile, to each have more space to store music, and each still be able to play that music without the other one having to be involved.
Thanks a bunch -- Discussions is one of my favorite places to lurk for hours.
- Kendra
(BTW, I'd upgrade my Airport if it helped, or buy an Express. And I've seen a lot on Sharepoints, but am not sure if that's what I'm looking for.)

Well to answer several questions at once, there are Ethernet (aka Network) Hard drives you can buy that hook up via ethernet. you could plug it in near your router and then plug the ethernet cable into one of the Router's ethernet ports and set up a network drive. It doesn't have to be connected directly to a computer. Here are two examples (shop around for price, size and features)...
http://shop3.outpost.com/product/5031245?site=sr:SEARCH:MAINRSLTPG
http://shop3.outpost.com/product/3945658?site=sr:SEARCH:MAINRSLTPG
Patrick

Can't install 10.4.9 on my internal hard drive - no destination volume

Hello,
I replaced the internal hard drive of my MacBook2.1 and am attempting to install Mac OS 10.4.9
Here are the specs:
500 GB Western Digital BPKT Scorpio Black Internal SATA Hard Drive
Intel Core 2 Duo
2 GHz
1 GB of memory
I start up the MacBook and insert the Install disk. I encounter a problem when at the 'Select Destination' section of the install. It says to 'Select a destination volume to install the Mac OS X software' but there is no destination volume available to select!
This led me to opening the 'Disk Utility'. When the Disk Utility is open, it shows the hard drive (the SMART status is verified) on the left. However, it says the total capacity of the HD is 3.6 TB, which is not correct. I erase the HD with the 'Mac OS Extended (journaled)' volume format. I attempt to partition the HD with one partition with the same format. When I click 'Partition' a window pops up that says 'Partition failed with the error - Input/output error'.
Not sure what to do to prevent this error. I do have install disks for Mac OS 10.5.4 and can partition the HD with that, but still no destination volume available when tryint to install 10.4.9. The MacBook2.1 can with version 10.4.9 and I cannot install 10.5.4.
I had read some discussions about problems with External HD's but haven't read any on Internal. I am really hoping someone can help me with this problem as I bought this MacBook second hand (from my wonderful sister) and am unfamiliar with it. Do I need a particular HD to install 10.4.9 properly? I'm all ears.
Thank you,
Highlander

Hello,
Was Highlander85's issue ever been resolved?A
I'm experiencing the exact same problem as Highlander85 except my system is an iMac and I'm attempting to erase/partition an internal Seagate Barracuda 500G SATA. I have tried everything that Highlander tried and still no luck. I also confirmed w/Seagate that adjusting jumper settings for this drive is not necessary. Is there a chance there is an issue w/my RAM or would you think it's time to open up my machine again and R/R myHDD while I am still within the stores return policy?
The spec's for my system per your last reply are below:
OS X 10.4.7 (Have original disks)
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2.5 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version (system): 1.9f4
Thanks in advance!
Cheers,
Kurt

Problem installing Mac OSX on my new MacBook hard drive...

Hi,
i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
blue skies,
ps. please feel free to email me at [email protected] if you think that would be better! :o)

Hi,
...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
blue skies,

Is it possible to install windows 7 on a partitioned external hard drive and then boot from windows from time to time?

I have some applications that are windows only. I want to install windows 7 on my external hard drive and boot to it when I need to use my windows applications. Is this possible with a mac and, if so, how can I do that? I have a 64-bit Macbook Pro running Mountain Lion.

VirtualBox is free.
Besides the websites for the different products, I don't know of any.
https://www.virtualbox.org
http://www.vmware.com
http://www.parallels.com

How do i install the osx software onto my new hard drive?

I have just recently replaced my hard drive due to a fault from the previous one. how do i install my software without a cd? Everything is done by internet cd's just dont exist anymore. What are my options?

I don't know if this will work or not, but if your machine shipped with Lion, try booting while holding down the Command, Option and R keys. You may be able to format your drive and then reinstall Lion on it.
It may work - it might not; give it a try.
Clinton

How do you install windows bootcamp on a second internal hard drive?

I have a SSD as my main hard drive then installed the old hard drive internally in the internal optical bay slot. Whenever I try to install Windows and reboot, I get the No Bootable Disk error. Any ideas?

Disconnect the hard drive (assuming you want to install on SSD) and put the optical drive back.
Even on a multi-drive Mac Pro (tower) or an iMac (with SSD and 2TB hdd) there are extra steps.
You can't install Windows on one and have a drive with OS X or even GPT partition type on second.

Is it possible to install two Oracle Databases on one host?

I got installed Oracle 10.1.0.3.0 on my host (OS: Linux CentOS 5 64-bit) and there is need to install another one on the same host. Additional database is supposed to be started up and shutted down once per a day for a couple of hours.
Is this configuration possible?
Thanks in advance

It is possible to have N database instances running on one box. They can also be running on the same or different $ORACLE_HOMEs.
If you are using the same ORACLE_HOME for all your databases, be sure to change your ORACLE_SID to point to the correct SID.
DBCA can help you create different databases from the current ORACLE_HOME

Possible to install two groupware connectors on one machine/system?

Hi gurus,
we want to save the money for a new machine, so I'm currently looking to get a second groupware connector installation done on the same machine. Anyone having experience with that? Is it even possible?
The setup.exe does not really offer to do a second groupware connector installation for exchange. Even if that would be possible I fear the created services for our machine (SAP MS Exchange Groupware Connector 2.1) will be overwritten by the second installation?
Torsten

Torsten,
I know from how the Lotus Notes version of the connector works, it just wouldn't work because of how it uses the Lotus Notes libraries. For exchange I'm not sure if there is as tight of integration. The connector is relatively light weight, so have you considered piggy backing it on another box such as a SAP webdispatcher or something else. You could also look at using a VM as the requirements for the connector aren't that much for a test system.
Take care,
Stephen

Installing Windows 7 with boot camp as whole partition on 2nd internal hard drive

Hi all,
I am unsure what is the recent changes with Apple boot camp. But when I used boot camp utilitiy on my Mac Pro (Mid 2010) to install windows 7 64 bits. It would not install and created a whole lot of problems.
After I initialise the process to install windows 7 using boot camp utilities, I chose the option to create a single partition to installl windows 7 on my secondary internal hard drive (1TB). After I restarted my Mac Pro and started the Windows 7 installation process, I was unable to install Windows 7 on the BOOTCAMP partition created by the boot camp utilitiy. I got an error something about Windows cannot be installed on the selected forum because the driver contained GPT details.
I tried to format the BOOTCAMP partition, but it ended up with errors. I tried to delete and recreate the BOOTCAMP partition in Windows setup, but failed with errors again. As I could not go any further with the Windows 7 installation, I had to hard reset my Mac Pro and tried to reboot back into Mac OS X Lion and that's when the nightmare begin.
Not only I could not boot into OS X, I could not use any of the startup key combinations (i.e. Hold option key to select start up disk, option + R to boot the lion recovery drive, not boot from any external firewire drive installed with OS X Lion). Basically none of the key combinations worked except for the holdingi F12 and mouse key to eject CD.
The only thing I could boot the Mac Pro with is the windows installation CD and Linux Ubuntu Raring Distro. I can install the ubuntu distro without any issue. However, I could not boot my mac pro back into OS X as Linux does not support bootcamp. The only way I could use Mac OS X Lion again is to delete the partition OS X Lion was installed on, and then I was be able to install Windows 7 without any issue.
After installing windows 7 I would have to download boot camp and then use the boot camp control panel to restart in the Mac Pro installation DVD and I will have to reinstall OS X again. After installing OS X, I went to System Preference and tried to select Windows 7 as startup disc. But I failed to as it says "Windows 7" Was installed via another utility. I would have to erase the partition and reinstall Windows 7 again using bootcamp utility. If I try to install windows 7 again, the horror I described above repeats again.
From my understanding, the Boot camp utility creates a new EFI bootrom with Master Boot Record (MBR) in FAT32 format. Therefore I could not boot back into Mac OS X without using boot camp in windows 7 as none of the boot combinations key worked.
I want to ask if anyone is experiencing the same issue as i do, and if there are any solutions to the problem I am experiencing. I never had such issue before. I was able to install Windows 7 on my 2ndary internal hard drive without issue using boot camp. I don't what has changed. I have googled for solution, I only found something related to XOM but nothing else.
If anyone can provide me with any help in regards to installing Windows 7 as a whole partition on a secondary internal hard drive. It'd be grealy appreciated. Thank you in advance.

If you have driver issue, just pre-download the boot camp drivers and save them on an external drive or burn them onto a cd, you will be able to load drivers via the advanced installation option during windows setup, that is if your osx partition isn't actively preventing you from installing win7 on the BOOTCAMP Partition created by boot camp assistant, I find this rather ironic, took me 3 days to figure out this issue, I was stuck without being able to boot into anything beside the windows cd, which wasn't even helpful as I could not install windows as I did not want to delete my osx partition. I lost all my data becsuse of it, as I had no idea what was going on. I tried to recover the partition using testdisk, hfsprogs and gparted in ubuntu life cd but they dont support HFS+. As I could not access osx terminal (couldn't even boot into osx installation dvd with that dreaded MBR created by boot csmp). I could not use pdisk in terminal to restore the osx partition map. Though luck for me. Called applecare and they had no idea what the problem was, and as usual they orgsnised for hard drive replacement. But it was clearly a software issue.
They will have to fix bay2 for me as I can no longer detect any hard disk connected to that bay.

Is it possible to install two SAP system with same SID but different instance numbers on one host?

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
If yes, then how?
If no, then why?
Thanks in advance.
Regards,
Sarim

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
Yes, it is possible. If one is CI (PAS) and the second one is an AS (AAS). In this case there will be only one database.
If you are talking about two separate SAP systems with separate databases (Eg: A BI and an ECC) with the same SID then the problem will be with the database (Eg: Oracle)
The database will be installed under /oracle/SID/112_64 (ORACLE_HOME) unless one database is running on 10 G and in that case the ORACLE_HOME will be /oracle/SID/102_64
The next issue will be with the SAP file systems like /sapmnt/SID
The most important problem will be with the switch to the sidadm and orasid users and the conflicts there. If there is a need to stop one of the SAP systems and if you do a switch to sidadm and issue a stopsap command which system will be stopped ?
These are few of the many problems I can think of.
So if we are talking about two separate systems with their own databases I would rule out the possibility of having two systems with the same SID.
Regards
RB

I've lost the use of Appleworks in 10.9.2. Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other?

I've lost the use of Appleworks by upgrading to 10.9.2.
Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and few other applications that aren't available on OS 10.9.2.
Any suggestions?
Thank you for your help.

Hello again, WZZZ,
Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
Some thoughts:
• The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
• The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
• If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
So, all in all a good project that got me where I wanted to go. Thank you for your help.
Appreciatively,
wallah

Is it possible to use Boot Camp to partition an external hard drive so there is a OSX partition and a Windows partiton? I want to use the external drive for backup only, NOT to load Windows and NOT to use as a boot drive.

I have partitioned the internal hard drive and am running Lion and Win7 Pro on my iMac i5 2.7GHz with 16GB RAM. Can I use Boot Camp to create a Windows partition on an OSX external hard drive to use for backing up both systems to the same HDD? I do NOT want to install OSX Lion or Windows 7 Professional on the external drive. I do NOT want to boot either system from the external drive. The 3TB external drive is for backup only.

Use NTFS for Windows and buy Paragon NTFS for OS X
You can also try Paragon HFS for Windows
As long as you are using for data and backups, you can leave the drive as GPT too.
I would recommend strongly to always have a 2nd bootable Mac OS drive, only need 30GB partition. System maintenance. Though LIon Recovery Mode finally makes it less but not totally unneeded.
And yes you can use Windows to create a partition.
Boot Camp is too broad. Do you want or mean BC Assistant? not needed but probably possible.
MBR has trouble with 3TB drives.

How to install two oracle database on one system

i want to install two oracle databases on single system how it is possible
how i can manager oracle home and is this possible to install two different version of oracle in single home or single system forexample oracle 9 and oracle 8 .
A.R

Hi,
yes, u can have more databases on a single machine and they can be of different versions.
You have to use and initialize the correct ORACLE_HOME to create the DB of the version U use.
For ex, u have 2 homes:
C:\Oracle\Ora817 8i home and C:\Oracle\ora920 9i home
Normally, using OFA, imagine that You want create 2 db, TEST_8I for 8i home and TEST_9I for the 9i home, You shold have:
C:\Oracle\Admin\TEST_8I\<<OFA DIRS>> and C:\Oracle\Oradata\TEST_8I for 8i DB adn C:\Oracle\Admin\TEST_9I\<<OFA DIRS>> and C:\Oracle\Oradata\TEST_9I for the 9i version.
It is important, when You create the DB, that u use the executables of C:\Oracle\Ora817\bin to create 8i db and C:\Oracle\Ora920\bin for the 9i one.
Then U can use the 9i listener to manage both instances
Hope this helps
Max

Is it possible to install two OSX`s on one internal hard drive?

Similar Messages

Maybe you are looking for