Is it possible to install Windows 7 on a new HP Stream 11?

Hello,
I'm trying to purchase inexpensive computers for my classroom. One of the computers I'm looking at is the new $200 HP Stream 11. My school's IT department said it might be difficult to install the district's copy of Windows 7 on these computers if I purchase them. Does anyone know if it's actually possible to uninstall Windows 8.1 and install Windows 7 using an external USB or external CD Rom Drive? Any help would be greatly appreciated. 

Mikhailov wrote:
Hello,
I'm trying to purchase inexpensive computers for my classroom. One of the computers I'm looking at is the new $200 HP Stream 11. My school's IT department said it might be difficult to install the district's copy of Windows 7 on these computers if I purchase them. Does anyone know if it's actually possible to uninstall Windows 8.1 and install Windows 7 using an external USB or external CD Rom Drive? Any help would be greatly appreciated. 
The District is right to say what they told you they can't install Disctrict Windows 7 on your computer because they have a license agreements with MS and doing so will violate their Terms of Agreement. And you shouldn't be asking something like that to start with. If that laptop can't install Windows 7 it then your stuck with WIndows 8 unless HP has downgrade to go back to Windows 7 on it otherwise if none exist you will not get any drivers or support for it. You best luck is to find a used Windows 7 laptop and order the HP recovery media for it and wipe it clean to factory install and register it to you and that will give you a Windows 7 maching to start with.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Similar Messages

  • Is it possible to install windows 8.1 on macbook pro late 2013?

    hi ,
    Is it possible to install windows 8.1 on late 2013 macbook pro?
    I have tried installing it twice but both of the time i got an error
    Windows could not update the computer's boot configuration. Installation cannot proceed. 

    Maybe people have found a solution already but yesterday I managed to install Win 8.1 as a BootCamp on my new 15" retina MBP.  I followed the steps John Guo described but with a couple of changes as his approach failed for me.
    1. Make sure you are starting from a single partition.
    2. Create the Windows install USB from the ISO and also allow BootCamp Assistant to create download the drivers - but untick the option to install windows.
    3. Open Disk Utility and create a new partition and format as MS-DOS (FAT) rather than leave as free space.
    4. Restart your Mac and use the option to boot into the Windows part of the USB not the EFI-boot.
    5. Follow the install
    6. When it comes to the drive selection select the FAT drive. Windows installer will say it cannot install here as it needs to be and NTFS partitiion (in previous atempts I always got the message to say the partitiion was using GUI partition table so could not install even though it was formatted to NTFS).
    7. The format to NTFS should work fine and install proceed.
    8. When the installer reboots the machine you will need to use the boot option to ensure you boot back into Windows.
    9. Once installed the bootcamp driver install runs automatically and for me all drivers run fine even the NVIDIA, which I've seen some people mention having issues with.
    I was inpressed with Windows automatically scaling the text to 200%, which meant it was using the full 2880x1800 resolution so everything was crisp but the windows and text was scaled nicely. I changed this 150% to give me some more real estate.
    I'm guessing that by formatting the new partition as FAT it creates a MBP within the new drive that is writable by windows but I'm not a windows guru so this is a guess. But anyway, this work perfectly.
    hope this helps some people.

  • Is it possible to install windows 7 on my macbook from a removable hard drive using boot camp? How would I do this?

    Is it possible to install windows 7 on my macbook from a removable hard drive using boot camp?
    How would I do this?

    If you have Lion installed, and run Boot Camp, it will create the boot flash for you, just followe the tutorial on screen. As far as I remember, this was not possible prior to Lion.

  • Is it possible to install Windows 7 on Satellite Pro 6100

    Is it possible to install windows 7 on a Toshiba Satellite pro 6100 machine? I 'm currently using windows XP.
    thanks.

    Hi buddy,
    Do you really think about Windows 7 installation on many years old Satellite Pro 6100???
    In my opinion this will not work because its too old and not fast enough. Newest OS that is supported from Toshiba is Windows XP and this should be the best choice for this oldie.
    So just be satisfied with Windows XP, its a good choice for older computers! :)

  • Is it possible to install Windows 7 on Retina MacBook with a shared CD drive?

    My school provides Windows 7 Ultimate upgrades to students
    My friend installed Windows 7 normally even though it's technically an upgrade (burned the .img file to a DVD using Disk Utility and installed it through the Boot Camp Assistant tool in Snow Leopard)
    I own a 2008 MacBook which has an optical drive
    I own 1, 2 GB thumb drive and 1, 4 GB thumb drive
    Is it possible to install Windows 7 through my Retina MacBook Pro through a shared CD connection with my 2008 MacBook?
    I tried using the Boot Camp Assitant tool.
    I burned the Windows 7 upgrade .img file to a DVD with Disk Utility just like my friend
    I copied that DVD as a .cdr file to my Retina MacBook using the shared CD connection and Disk Utility, and changed the file extension to .iso
    With the Boot Camp Assistant, I set-up my 4 GB thumb drive
    When I get to the "Create a Partition for Windows" screen and I press install, I get the message "The installer disc could not be found".
    The DVD is in my 2008 MacBook and I mounted it on the Retina MacBook. The 4 GB Windows set-up thumb drive is connected to the Retina MacBook.
    I'm confused as to what I'm doing wrong.
    Any help is appreciated.

    You need the USB SuperDrive or an USB disk to install Windows on the computer

  • Is It Possible to Install Windows 7 on a GUID Partition Table Disk?

    Is it possible to install Windows 7 on a GPT disk?
    I created a RAID 0 array on my dual Xeon 5580 system and tried installing Windows 7 Ultimate 64-bit RTM. When I got to the "Where do you want to install Windows" part I used shift-F10 to open up a command window, then I used diskpart to create a GPT with the following partitions:
    Disk 0 Part 1 -  102 MB EFI System
    Disk 0 Part 2 -  128 MB MSR
    Disk 0 Part 3 -  500 MB Primary
    Disk 0 Part 4 - 7446 GB Primary
    But there was a message "Windows cannot be installed to Disk 0 Partition 3 (show details)" - clicking on "show details" gave me "Windows cannot be installed to this disk. The selected disk is of the GPT partition style."
    What gives? I thought Windows Vista and beyond supported GPT.
    The problem with MBR is that you can't have a file system larger than 2 TB.
    Cheers, Eric

    I am trying to install Windows Server 2008 R2 Ent edition onto system that has an ASUS M3A78 Pro motherboard with 8GB of memory & an AMD Phenom II x3 2.6GHz Socket AM3 Processor
    (X3 710).
    I realize that this system doesn't support UEFI but I have an Adaptec 3805 RAID controller in this system that does support the advanced format hard drives, so I would think I should
    be OK there.
    Attached to the RAID controller are 3 - 1.5TB SATA Hard Drives in a RAID 5 yeilding 2.72TB's of usable space.
    I followed the following process to convert the array to GPT.
    I booted to the Server 2008 R2 Ent installation DVD.
    I select next at the language \ time & currency format \ Keyboard selection screen.
    Then I select the 'repair your computer' option at the following screen.
    I do not select the 'repair' (default) option, but instead select the radio button above it (I forget what that's labeled) working from memory here - which gives me the option to
    launch a command prompt.
    I launch diskaprt from that command prompt.
    First I selected the disk
    list disk (this displays the installed disks)
    select disk 0
    The I converted the disk to gpt
    convert gpt
    Then I created 200 MB EFI partition:
    create partition
    efi size=200
    Then I created MSR
    partition:
    create partition
    msr size=128
    Then I created primary
    partition:
    create partition
    primary
    ...and it took remaining
    available space to itself.
    I assigned drive
    letter C to this new first "primary" partition
    Assign letter=c
    I confirmed the order is:
    I confirmed the partition order is:
    ESP > MSR > DATA Partition
    After all of that I restart into the Windows installation and attempt to install by selecting the newly created primary partition and am presented with an error that states:
    “Windows cannot be installed to Disk 0 Partition 3. (Show details)”
    and the details show:
    "Windows cannot be installed to this disk. The selected disk is of the gpt partition style."
    Any help anyone could provide would be greatly appreciated.
    Thanks

  • Exist a possibility to install windows xp in macbook pro 2011

    exist a possibility to install windows xp in macbook pro 2011

    Yes. Install XP using Parallels, Fusion, or VirtualBox.

  • Hi, I would like to know if is it possible to install windows on mac pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

    hi, I would like to know if is it possible to install windows on macbook pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

    Windows on a Mac

  • Is it possible to install Windows in MacBook Air?

    I want to purchase a MacBook Air as I want to get experienced with Lion and just want to take feel of Mac. But yet I am expereicned with Windows only so will it be possible to install Windows (Dual Boot/Virtual Machine) in MacBook Air?

    Yes, Windows7, through Apple's boot camp or a virtualization program like Paralells.

  • Is it possible to Install Windows on Sparc machine.

    hi
    Can anybody please tell me that is it possible to install Windows Operating system on a SPARC machine using some kind of VMWare*.

    Hi.
    SPARC CPU not compatible with x86, so no one program for x86 can be run on SPARC cpu.
    Many many years ago was product WABI. It was emulation x86 on SPARC and can allow install windows in special environment.
    It was Windows 3.1 :) . It work slow.
    After this SUN make product SunPCi. It was special card with installed x86 CPU and even separate memory.
    Realy - PC on card. With Special Program it allow install windows. Realy Windows work on x86 CPU, not on SPARC.
    Now all this product died many years. SPARC system more expensive. It's easy and cheap buy general PC for Windows.
    Regards.

  • How to install Windows 7 on new hard drive?

    I have changed the old hard drive (500 gb) with a new hard dirve (1 Tera), and now I have two problems: -
    1. How do I install Windows 7 on new hard drive?
    2. My laptop was pre-installed Windows 7 Pro, but all the DVD kit (Application & Drives Recivery Disc + Operating System Revocer), which was provided (by Lenovo) for the laptop is in the Windows 8 Pro. So how do I install Windows 7 Pro, in my laptop while all DVD kits are in Windows 8 Pro?
    by the way this is my laptop spec (for reference) ; -
    * Note *
    I plan to install Windows 7 Pro in my new hard drive using another Windows 7 DVD (Not DVD provided by Lenovo), but how do I get all the Leveno program which found within the 'Application & Drives Recivery' disc (such as ; - Lenovo System Health and Diagnostics, Lenovo Power Control,Lenovo's Fingerprint Reader) to install in that hard drive? (as I tell you before, all the DVD kit is in or only for Windows 8 Pro)
    I hope somebody will help me answer my question,
    Thank You
    Solved!
    Go to Solution.

    I got the solution;
    Answer to question 1 ; using a backup & recovery software to clone my current OS, then transfer to my new hard drive.
    Answer to question 2 ; download all the Drivers and software ( all the application that located on the DVD kit that I have) on Lenovo Official Website.
    or other solution, send it to a computer service shop and let the experts ( the workers) install it for me ( the most simple and safe way).

  • I need to install windows on my new Macbook pro for running my flight simulator software

    Hi!
    I'm new to the Mac world and I need to install windows on my new Macbook pro for running my flight simulator software which only runs on windows. I would like to purchase and download the windows 8.1 rather than buying the CD.
    When i go to the microsoft store and click windows 8.1 it says it is only for who has windows xp or vista...
    can you tell me where and how can i purchase the full installation 8.1 for download?
    i will keep the ISO file on my flash drive.
    Thanks!
    <Re-Titled By Host>

    it's likely an upgrade you are looking for and not a full install of windows
    http://www.techrepublic.com/blog/windows-and-office/get-the-iso-you-need-to-crea te-your-own-windows-81-dvd/
    if you get it as an iso file then you need to burn the iso file to a optical disc to install it

  • I have installed windows on the new NTFS partician and cant boot  it back to mac

    I have installed windows on the new NTFS partician and cant boot  it back to mac. I dont think I loaded the bootcamp for windows properly now it is stuck in Windows with no bootcamp icon

    Restart Windows, hold down the option key.
    If you have a valid OSX install, the drive should appear. Choose the OSX partition and continue.

  • Is it possible to install lightroom on my new computer if it was purchased a while ago and installed on my old mac?

    Is it possible to install lightroom on my new computer if it was purchased a while ago and installed on my old mac?
    my mac has since died and I need my lightroom for my photography course.
    please help! im hopeless with technology.

    The license is yours and you can continue using it on a new system of course.
    Mylenium

  • Trying to install Windows 7 on new iMac

    Trying to install Windows 7 on new iMac (OS X Mavericks). Have Windows 7 DVD. Have superdrive. Have USB flash drive. What is, and where do I find the "Windows ISO image" that Bootcamp is asking for? ("select the Windows ISO image"...)

    You can use the installation dvd from microsoft or you can download the iso file from microsoft and use that method instead.
    http://techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/

  • Is it possible to install Windows 8 through BootCamp on MAC OS Lion(v10.7.5)  ?  If yes then how cai do that ? Please suggest me something...

    I am trying to install Windows 8 on my MacBook Pro(Late 2011) via BootCamp. I am using MAC OS Lion(v10.7.5).
    So is it possible to do that ? If yes then how can i do that ?

    Read the first item here http://support.apple.com/kb/HT1899

Maybe you are looking for