Is it possible to install Windows 7 on my Satellite M40X?

Hi,
I tried to update on Windows 7. Now I am looking for a driver for audio, network and massstorage. Is it generally possible to install win7?
Thanks

Hi
Win 7 is definitely possible. I could install Win 7 on my 6 years old notebook even if the drivers were not available.
I used this instruction to find out what device my notebook support and could search using google for Win 7 drivers:
[How to identify an unknown device?|http://aps2.toshiba-tro.de/kb0/HTD0302U00000R01.htm]
But to be honest, its difficult to find all Win 7 drivers for such units the point is that even chip manufacturers dont provide Win 7 drivers for older chip/devices.
However in most cases Windows 7 uses own standard Microsoft drivers.

Similar Messages

Is it possible to install Windows 7 on Satellite Pro 6100

Is it possible to install windows 7 on a Toshiba Satellite pro 6100 machine? I 'm currently using windows XP.
thanks.

Hi buddy,
Do you really think about Windows 7 installation on many years old Satellite Pro 6100???
In my opinion this will not work because its too old and not fast enough. Newest OS that is supported from Toshiba is Windows XP and this should be the best choice for this oldie.
So just be satisfied with Windows XP, its a good choice for older computers! :)

Is it possible to install windows 8.1 on macbook pro late 2013?

hi ,
Is it possible to install windows 8.1 on late 2013 macbook pro?
I have tried installing it twice but both of the time i got an error
Windows could not update the computer's boot configuration. Installation cannot proceed.

Maybe people have found a solution already but yesterday I managed to install Win 8.1 as a BootCamp on my new 15" retina MBP. I followed the steps John Guo described but with a couple of changes as his approach failed for me.
1. Make sure you are starting from a single partition.
2. Create the Windows install USB from the ISO and also allow BootCamp Assistant to create download the drivers - but untick the option to install windows.
3. Open Disk Utility and create a new partition and format as MS-DOS (FAT) rather than leave as free space.
4. Restart your Mac and use the option to boot into the Windows part of the USB not the EFI-boot.
5. Follow the install
6. When it comes to the drive selection select the FAT drive. Windows installer will say it cannot install here as it needs to be and NTFS partitiion (in previous atempts I always got the message to say the partitiion was using GUI partition table so could not install even though it was formatted to NTFS).
7. The format to NTFS should work fine and install proceed.
8. When the installer reboots the machine you will need to use the boot option to ensure you boot back into Windows.
9. Once installed the bootcamp driver install runs automatically and for me all drivers run fine even the NVIDIA, which I've seen some people mention having issues with.
I was inpressed with Windows automatically scaling the text to 200%, which meant it was using the full 2880x1800 resolution so everything was crisp but the windows and text was scaled nicely. I changed this 150% to give me some more real estate.
I'm guessing that by formatting the new partition as FAT it creates a MBP within the new drive that is writable by windows but I'm not a windows guru so this is a guess. But anyway, this work perfectly.
hope this helps some people.

Is it possible to install windows 7 on my macbook from a removable hard drive using boot camp? How would I do this?

Is it possible to install windows 7 on my macbook from a removable hard drive using boot camp?
How would I do this?

If you have Lion installed, and run Boot Camp, it will create the boot flash for you, just followe the tutorial on screen. As far as I remember, this was not possible prior to Lion.

Is it possible to install Windows 7 on Retina MacBook with a shared CD drive?

My school provides Windows 7 Ultimate upgrades to students
My friend installed Windows 7 normally even though it's technically an upgrade (burned the .img file to a DVD using Disk Utility and installed it through the Boot Camp Assistant tool in Snow Leopard)
I own a 2008 MacBook which has an optical drive
I own 1, 2 GB thumb drive and 1, 4 GB thumb drive
Is it possible to install Windows 7 through my Retina MacBook Pro through a shared CD connection with my 2008 MacBook?
I tried using the Boot Camp Assitant tool.
I burned the Windows 7 upgrade .img file to a DVD with Disk Utility just like my friend
I copied that DVD as a .cdr file to my Retina MacBook using the shared CD connection and Disk Utility, and changed the file extension to .iso
With the Boot Camp Assistant, I set-up my 4 GB thumb drive
When I get to the "Create a Partition for Windows" screen and I press install, I get the message "The installer disc could not be found".
The DVD is in my 2008 MacBook and I mounted it on the Retina MacBook. The 4 GB Windows set-up thumb drive is connected to the Retina MacBook.
I'm confused as to what I'm doing wrong.
Any help is appreciated.

You need the USB SuperDrive or an USB disk to install Windows on the computer

Is It Possible to Install Windows 7 on a GUID Partition Table Disk?

Is it possible to install Windows 7 on a GPT disk?
I created a RAID 0 array on my dual Xeon 5580 system and tried installing Windows 7 Ultimate 64-bit RTM. When I got to the "Where do you want to install Windows" part I used shift-F10 to open up a command window, then I used diskpart to create a GPT with the following partitions:
Disk 0 Part 1 - 102 MB EFI System
Disk 0 Part 2 - 128 MB MSR
Disk 0 Part 3 - 500 MB Primary
Disk 0 Part 4 - 7446 GB Primary
But there was a message "Windows cannot be installed to Disk 0 Partition 3 (show details)" - clicking on "show details" gave me "Windows cannot be installed to this disk. The selected disk is of the GPT partition style."
What gives? I thought Windows Vista and beyond supported GPT.
The problem with MBR is that you can't have a file system larger than 2 TB.
Cheers, Eric

I am trying to install Windows Server 2008 R2 Ent edition onto system that has an ASUS M3A78 Pro motherboard with 8GB of memory & an AMD Phenom II x3 2.6GHz Socket AM3 Processor
(X3 710).
I realize that this system doesn't support UEFI but I have an Adaptec 3805 RAID controller in this system that does support the advanced format hard drives, so I would think I should
be OK there.
Attached to the RAID controller are 3 - 1.5TB SATA Hard Drives in a RAID 5 yeilding 2.72TB's of usable space.
I followed the following process to convert the array to GPT.
I booted to the Server 2008 R2 Ent installation DVD.
I select next at the language \ time & currency format \ Keyboard selection screen.
Then I select the 'repair your computer' option at the following screen.
I do not select the 'repair' (default) option, but instead select the radio button above it (I forget what that's labeled) working from memory here - which gives me the option to
launch a command prompt.
I launch diskaprt from that command prompt.
First I selected the disk
list disk (this displays the installed disks)
select disk 0
The I converted the disk to gpt
convert gpt
Then I created 200 MB EFI partition:
create partition
efi size=200
Then I created MSR
partition:
create partition
msr size=128
Then I created primary
partition:
create partition
primary
...and it took remaining
available space to itself.
I assigned drive
letter C to this new first "primary" partition
Assign letter=c
I confirmed the order is:
I confirmed the partition order is:
ESP > MSR > DATA Partition
After all of that I restart into the Windows installation and attempt to install by selecting the newly created primary partition and am presented with an error that states:
“Windows cannot be installed to Disk 0 Partition 3. (Show details)”
and the details show:
"Windows cannot be installed to this disk. The selected disk is of the gpt partition style."
Any help anyone could provide would be greatly appreciated.
Thanks

Exist a possibility to install windows xp in macbook pro 2011

exist a possibility to install windows xp in macbook pro 2011

Yes. Install XP using Parallels, Fusion, or VirtualBox.

Hi, I would like to know if is it possible to install windows on mac pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

hi, I would like to know if is it possible to install windows on macbook pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

Windows on a Mac

Is it possible to install Windows in MacBook Air?

I want to purchase a MacBook Air as I want to get experienced with Lion and just want to take feel of Mac. But yet I am expereicned with Windows only so will it be possible to install Windows (Dual Boot/Virtual Machine) in MacBook Air?

Yes, Windows7, through Apple's boot camp or a virtualization program like Paralells.

Is it possible to Install Windows on Sparc machine.

hi
Can anybody please tell me that is it possible to install Windows Operating system on a SPARC machine using some kind of VMWare*.

Hi.
SPARC CPU not compatible with x86, so no one program for x86 can be run on SPARC cpu.
Many many years ago was product WABI. It was emulation x86 on SPARC and can allow install windows in special environment.
It was Windows 3.1 :) . It work slow.
After this SUN make product SunPCi. It was special card with installed x86 CPU and even separate memory.
Realy - PC on card. With Special Program it allow install windows. Realy Windows work on x86 CPU, not on SPARC.
Now all this product died many years. SPARC system more expensive. It's easy and cheap buy general PC for Windows.
Regards.

Is it possible to install Win XP on Satellite T110?

IS IT POSSIBLE TO INSTALL WINDOWS XP IN TOSHIBA SATELLITE T110.
BECAUSE WHEN I START INSTALLING XP IT SAYS SOMETHING "HARDISK ERROR" PRESS F3 TU QUIT.
WHAT SHOULD I DO ??

Of course its possible.
The Win XP does not seem to recognize the HDD due to missing SATA driver.
You have to add SATA driver while Setup procedure.
The SATA drivers are part of Intel Storage Manager which you can download from Toshiba EU driver page.

Is it possible to install Windows 8 through BootCamp on MAC OS Lion(v10.7.5) ? If yes then how cai do that ? Please suggest me something...

I am trying to install Windows 8 on my MacBook Pro(Late 2011) via BootCamp. I am using MAC OS Lion(v10.7.5).
So is it possible to do that ? If yes then how can i do that ?

Read the first item here http://support.apple.com/kb/HT1899

Is it possible to install Windows 7/8 from a partition on a separate drive?

Hi everyone,
Early 2008 Mac Pro with 10.8.2.
I have two sata drives mounted in my tower--the OS drive and a media drive.
I'm wondering if it's possible to partition 10 or so GB off of that secondary media drive (OS Extended Journaled, GUID), load the win 7 (or 8) ISO and install Windows through bootcamp via that new partition.
Alternately, I have an external USB drive (sata), and could possibly try that same method of formatting off 10 gigs and loading the ISO in a similar manner if bootcamp only checks between DVD media and USB for where it wants to read the installer file.
This method would circumvent the need for a blank DVD or a USB flash drive--both of which I don't currently have.
Does anybody have any experience with this?

I am trying to install Windows Server 2008 R2 Ent edition onto system that has an ASUS M3A78 Pro motherboard with 8GB of memory & an AMD Phenom II x3 2.6GHz Socket AM3 Processor
(X3 710).
I realize that this system doesn't support UEFI but I have an Adaptec 3805 RAID controller in this system that does support the advanced format hard drives, so I would think I should
be OK there.
Attached to the RAID controller are 3 - 1.5TB SATA Hard Drives in a RAID 5 yeilding 2.72TB's of usable space.
I followed the following process to convert the array to GPT.
I booted to the Server 2008 R2 Ent installation DVD.
I select next at the language \ time & currency format \ Keyboard selection screen.
Then I select the 'repair your computer' option at the following screen.
I do not select the 'repair' (default) option, but instead select the radio button above it (I forget what that's labeled) working from memory here - which gives me the option to
launch a command prompt.
I launch diskaprt from that command prompt.
First I selected the disk
list disk (this displays the installed disks)
select disk 0
The I converted the disk to gpt
convert gpt
Then I created 200 MB EFI partition:
create partition
efi size=200
Then I created MSR
partition:
create partition
msr size=128
Then I created primary
partition:
create partition
primary
...and it took remaining
available space to itself.
I assigned drive
letter C to this new first "primary" partition
Assign letter=c
I confirmed the order is:
I confirmed the partition order is:
ESP > MSR > DATA Partition
After all of that I restart into the Windows installation and attempt to install by selecting the newly created primary partition and am presented with an error that states:
“Windows cannot be installed to Disk 0 Partition 3. (Show details)”
and the details show:
"Windows cannot be installed to this disk. The selected disk is of the gpt partition style."
Any help anyone could provide would be greatly appreciated.
Thanks

I installed an SSD in my optical bay, is it possible to install Windows 8 in that drive?

[15" late 2011 MBP with preinstalled 8GB of RAM and 128GB of SSD]
To the goddesses of this community:
Here's the deal. Although I love OS X, but let's be realistic, there are some softwares out there only run on Windows
Therefore, I am planning to buy an OCZ Vector 256GB SSD, transfer the OS X and all other files from the preinstalled 125GB SSD to the new OCZ Vector SSD.
Then, install the new OCZ SSD in the hard drive bay.
After that, wipe my old 128GB SSD, swap out my optical drive and install my old 128GB SSD in its place.
Here's the critical part: I plan to install Windows 8 on my 128GB SSD which is currently empty and sitting in the optical bay.
I have read some past posts saying it is not possible since 1. Boot Camp only allows Windows to be installed in the same SSD OS X is installed in. 2. You can not install Windows using Boot Camp Assistant without an internal optical drive.
I wish to know it the above infomation is still true. If not, how to install Windows 8 in my new SSD?
Thank you very much!

A couple of things to note - first, you can't use Boot Camp to install Win8 on any drive except yoru start-up drive. Second, you'd want the SSD to be in the main HD bay, not the optical bay, if you plan to use it as a bootable OS X device.
Clinton

Is it possible to install windows 8.1 sl oem cd in my mac ?? if yes, please tell me so

i want to install windows 8.1 on my system. i have a windows 8.1 sl oem disk. is it possible for me to install the same ??
i am currently using yosemite. i tried to install it but the installation gets stuck after typing in the activation code

Are you attempting to use Boot Camp, if so then I'd suggest posting in the Boot Camp forum. That is where the MS Windows and Boot Camp guys hang out, if you would like I can ask the moderator to move your thread for you.

Is it possible to Install Windows 8 Pro 64-bit on a secondary hard dive in Mac Mini (Late 2012) using Boot Camp 5?

Hello,
I have a Mac Mini (Late 2012) running on OS X 10.8.3 and would like to install Windows 8 Pro on a secondary hard drive using Boot Camp 5. Is that really possible?
A little background about the topic under discussion.
1. Mac Mini (Late 2012) has a place holder to accomodate an additional hard drive (2.5") under the hood
2. If just plugged with one, it would show as an additional volume in the finder
3. Boot Camp 5 supoprts Windows 8 Pro 64-bit installation
The idea is to run two operating systems (1. OS X and 2. Windows 8) on two hard drives in a Mac Mini, with maintainability a constraint.
Have any one tried this out? If so, kindly share if there are any specific procedures apart form the one given in Boot Camp 5 manual.
Thanks in advance.
~ Narey

Gotcha!!
I am done with mounting a secondary HDD (thanks to ifixit) and installing Windows 8 Pro 64 bit on it without a worry. Charm, charm!!
Boot Camp 5 guide prescribes all needed steps and when read and used correctly, installation must be an easy task. And all the existing apple hardwares work so good in the Windows environment too.
I am going to help out a friend of mine in doing a similar thing on his mac too. If you got specific questions, please do shoot up here and i should be able to get a reply to it (if at all).
Thanks everyone.
~ Narey

Is it possible to install Windows 7 on my Satellite M40X?

Similar Messages

Maybe you are looking for