Is it possible to join two clips?

is it possible to join two clips?

Select them and use the "join" menuItem (though there's generally no reason to do so unless you're trying to save them as a loop)

Similar Messages

Possible to Join Two Mono Tracks to Stereo, Or Change Panning of a Stereo?

In the new Garage Band 11, is it possible to Join Two Mono Tracks to Stereo, or Change the Panning of a Stereo track, or split a stereo track into two mono files?
Sometimes it would be convenient when I have a lot of tracks to combine two mono tracks into one stereo track to eliminate an additional track.
Also, I find that I often want to change the panning of a stereo track to either make it wider, or merge the two channels, even reverse L&R. If no way to change the panning of a stereo track can a stereo track be split into two mono tracks to be panned differently?

Woodwyn wrote:
is it possible to Join Two Mono Tracks to Stereo
only by exporting the two tracks
or Change the Panning of a Stereo track
you can pan a stereo track in every version of GB with the pan knob
or split a stereo track into two mono files?
indirectly:
http://www.bulletsandbones.com/GB/GBFAQ.html#stereotomono
(Let the page FULLY load. The link to your answer is at the top of your screen)
want to change the panning of a stereo track to either make it wider, or merge the two channels
that's different. no, you'd have to split the track into two mono files as described above.
even reverse L&R.
same answer

Hi, I am trying to join two clips after splitting one clip to edit 'ums' and 'ahs' in a sentence.

Hi,
I am having trouble joining clips in iMovie. Every time I try the 'join clip' choice under 'edit' is grayed out. I would like to join two clips from time to time -- not necessarily two clips that were once one and then split. Just two clips. Maybe I did not want the material in between.
This time, I did select a section of a clip during an interview to take out 'ah, ah, ah... um' and deleted that section. And in doing so I created two clips. Now I'd like to rejoin them for a seamless sentence with out the jumping from one clip to the next. But 'join clip' is grayed out.
Thanks.

Thank you.
But I wish I could join them before I share so I can make sure the transition is smooth. Right now it's obvious there's a 'jump' to the next clip, not smooth. I'd like to be able to splice and edit have it be seamless. Say, I want to add something a speaker says 5 minutes down the road to a sentence he says now, cutting and pasteing, and having it appear that he said it all at once. Right now it's obvious there was some cutting and pasteing. I was thinking joining the clips would smooth this out.

CS6: Joining two clips after cutting?

Hi,
after razor cutting a clip (and doing other steps after it): is it possible to join the clip again?
Or is it the only way to delete the first or the second clip and strech the other? But this would be a little circuitous.
thanks
mtemp

This feature was added in CC, For CS6, you'll have to delete one of the clips and extend the other.

Is it possible to join two single pages in a pdf into one double page spread?

Is it possible to take two single pages from separate pdf documents and combine them as one double page spread?
If it is possible could someone describe how it is done please?

The InDesign method Steve mentions is the best option. You can also place it in Illustrator as an import but you'll need to have the same fonts as the PDF file. This option will allow you to edit the files, pending what objects are editable. It will have a few quirks, and the text lines might be separate objects.
I'd go InDesign, but just in case you don't have ID, you can use Illustrator, but be prepared for a little work.

Where did the possibility to join two smooth endpoints into one go?

I used get a dialog box when joining two overlapping endpoint, that is if they truly were on top of each other. I would get a dialog box when selecting two endpoints and pressing cmd+j where I could choose either smooth or corner.
Now in Illustrator CS6 I do not get any dialog box no matter what I do and it always joins the two endpoints as corner even thoug they both started out as smooth - that is had both their arms. Is there another way to do this now?

Well ... since I use "Average and join" all the time and very seldom only "Join" I just switched the shortcuts, so now Join has the 4-keys shortcut.
Actually I can't think of a time I needed the corner join. Most of the time I use Pen Tool, and join paths with that, and with corner joins I just remove any excess points, but with more difficult smooth path constructions I find I often need the smooth join.
I never figured why one can't select more than one arm like you can select more than one point ... it would make altering symetric paths symetrically so much easier.

Is it possible to join two video files?

Is there any way i can use mac os to join two AVI files together, and then create a new copy of the combined video to show on my iPad. if i can avoid using iMovie that would be great.
thanks

As far as i know QuickTime can not support all kinds of AVI, and even it can join AVI files into one, the joined AVI files cannot be imported to iTunes, iPad, iPod, iPhone for playback.
I know a step by step guide on how to merge video files on Mac or Windows
This guide support join all kinds of video and audio formats like MP4, AVI, MPEG, MPG, VOB, MOV, RM, RMVB, 3GP, ASF, WMV, WTV, DVR, DivX, Xvid, M4V, MKV, FLV, F4V, SWF, WebM, OGV, Apple ProRes, AVCHD, MTS, M2TS, M2T, MXF, MVI, DAT, MOD, TOD, MPV, OGM, MP3, WAV, WMA, M4A, FLAC, M4B, AAC, AC3, APE, AIFF, Apple Lossless ALAC, VOC, QCP, AMR, AWB, DTS, AU, RA, OGG and etc
And you can join video files as well convert video to other video or audio formats or keep the same video format as the original one.
And you can also merger several video files even they are not in the same video format.
Hope it helps more or less

Is it possible to join two songs so they always play together

Windows laptop going to ipad and ipod

As far as i know QuickTime can not support all kinds of AVI, and even it can join AVI files into one, the joined AVI files cannot be imported to iTunes, iPad, iPod, iPhone for playback.
I know a step by step guide on how to merge video files on Mac or Windows
This guide support join all kinds of video and audio formats like MP4, AVI, MPEG, MPG, VOB, MOV, RM, RMVB, 3GP, ASF, WMV, WTV, DVR, DivX, Xvid, M4V, MKV, FLV, F4V, SWF, WebM, OGV, Apple ProRes, AVCHD, MTS, M2TS, M2T, MXF, MVI, DAT, MOD, TOD, MPV, OGM, MP3, WAV, WMA, M4A, FLAC, M4B, AAC, AC3, APE, AIFF, Apple Lossless ALAC, VOC, QCP, AMR, AWB, DTS, AU, RA, OGG and etc
And you can join video files as well convert video to other video or audio formats or keep the same video format as the original one.
And you can also merger several video files even they are not in the same video format.
Hope it helps more or less

Combine two clips into one

Hi, is it possible to take two clips and join them together (that were never joined before, but are two different clips)? I want to make it so both clip appear when viewed. For example, if I had a video clip of it raining outside and a clip of somebody dancing, I would want both clips to be joined into one which would be viewed as somebody dancing in the rain. I am not sure if this is possible, but any thoughts or tips would be appreciated.
Note: (I do know that there is an effect for rain)
Thank you!
-Jason

Jason,
the effect you are looking for is called 'blue-' or 'green-screening'. The name derives from the background color you shoot one scene with. It is was usually blue because it is a color that does not appear naturally on an actor, and can easily be targeted by the composition hardware (a so-called 'chroma-keyer'. Blue worked well because at that time a simple high-pass filter on the blue channel could be used to trigger the composition circuit, and allowed real-time composition on analog hardware).
It basically works like this:
1. Set up a really good lit stage with a blue or green background. It is very important that both background and actor are well lit.
2. Film your scene
3. Film the scene you want to place your actor in (e.g. rain) - let's call it the 'actless' scene because no acting happens
4. Use a chroma keying plug-in ('blue-screen', 'green-screen') to replace anything blue or green in your acted scene with the actless scene.
If you have both scenes shot already (without a uniformly colored background), this will not work.
We do have chroma-keying plug-ins (see here:
http://www.imovieplugins.com/plugs/chromamovie.html
and here: http://www.imovieplugins.com/plugs/chromastatic.html), but currently (while Apple is transitioning to Intel) they have become unreliable. Some of our esteemed competitors have similar plug-ins you might want to look at.
Hope this helps,
-ch
Please Note:
I work for cf/x, and may profit from posting here.

Join two ThemeBasedFOI in one

Hello,
I am working with the Mapviewer Javascript API and I would like to know if it is possible to join two ThemeBasedFOI in one. I have 2 themebasedfoi each one with one style applied and I need to show both of them as only one.
Thanks in advance.

No, not with iPhoto.
You'll need to use an external editor for the job.
In order of price here are some suggestions:
Seashore (free)
_[The Gimp|http://www.gimp.org/macintosh>_ also free
Graphic Coverter ($45 approx)
Acorn ($50 approx)
[Pixelmator|http://www.pixelmator.com> ($60 approx.)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Regards
TD

Join two unrelated data sources

Is it possible to join two unrelated data sourcesin OWB, if yes, how?
The closest which comes to my mind is union (outer join) thru two proxy expressions with redundant column holders for reciprocal columns.
But I am thinking, above would lead to excessive wastage.
So is there a better way possible.
Rgds,
Deepak

Deepak,
I think there are 2 different things you are trying to achieve:
1) With a grand total, something along the lines of:
select emp1.empno
, emp1.ename
, count(emp2.empno) count_empno
from emp1
, emp2
This query will retrieve a grant total, and because there is no relationship, you do not need a join condition. You do access the emp table twice.
OWB would implement this like:
select emp1.empno
, emp1.ename
, (select count(emp2.empno) from emp2) count_empno
from emp1
The other thing you seem to like to implement is a join on the customer_id, or similar for the simplified example, say on deptno in the emp table:
select emp1.empno
, emp1.ename
, sum(emp2.sal) dept_sal_sum
from emp1
, emp2
where emp1.deptno = emp2.deptno
group by emp1.empno
, emp1.ename -- this does not add anything, but...
Again, the way OWB would implement this (something similar):
select emp1.empno
, emp1.ename
, (select sum(emp2.sal)
from emp2
where emp2.deptno = emp1.deptno
) dept_sal_sum
from emp1
group by emp1.empno
, emp1.ename -- this does not add anything, but...
Anyway, so the way you would create this is by using the same source multiple times, include the aggregates and put in the join conditions appropriately.
Hope this makes sense... and addresses the issue.
Mark.

Joining two different iTunes accounts

Hi, is it possible, to join two different accounts on iTunes Store, in to one? I've got on both of them apps purchased. One is registred on Poland and the second is on USA (11 cents left).
Can someone tell me if is it possible?

transferring money from this new account that is currently registred on US and making this account another account on Poland?
You can contact the iTunes Store Customer Service department using the form on their Support page (select the category and subcategory closest to the issue you're reporting) and explain your situation to them. Perhaps they can help.
if I have for example 11 cents and I will add my credit card details to account, can I spend those 11 cents on something, than just pay the rest for something from my c.card?
If you still have a US credit card, yes. The US iTunes Store won't accept a Polish credit card, though.
Regards.

Is it Possible to Overlap Two or More Video Clips at Once?

I'm wondering if it's possible to overlap two video clips onto each other (e.g. one video of someone singing and another one of someone playing guitar). This would be similar to overlapping tracks in Garageband. Is it also possible to record over a track (e.g. record a video of someone singing as the video of someone playing guitar is being played?) If so, I was wondering how this can be achieved. Thanks!
Message was edited by: thedude15

iMovie Help will lead you to these (and more topics that may be of interest):
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/23568.html
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/24545.html
G5 DP 1.8GHz w/Mac OS X (10.5.6) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

How do i join multiple clips into a single movie?

I imported various video clips from my device into imovie 09. I have move all my selected parts of all the clips into my project pane. How do I join all these seperate clips in the project pane into one single movie, and then save it as such??

i have used the share menu to save the movie under quicktime. This brings two more questions:
1. Is there not a way join the clips into one movie and save it with iMovie, rather than having to share it with another application?
2. If I do share it with quicktime, can i delete the original clips from iMovie, or will that also delete the new movie in quicktime?

Can you please help me by saying me how can i join two different picture to make it as one picture.??

Hi Sir/ Madam,
My name is Rishav and I am facing some problem with my Photoshop CC. Actually I have a question. If you guys could help me out i will be very obliged. The quest in "Can you please help me by saying me how can i join two different picture to make it as one picture.??"

Maybe you should post over at
Photoshop for Beginners
or start with the "Get Started" section of the Help:
Photoshop Help | Photoshop Help
And your question
Can you please help me by saying me how can i join two different picture to make it as one picture.??
does not seem particularly specific – do you want to simply combine two images as they are, do you want to clip elements from the one and insert them into the other, …?
Could you post (lores of) the images and explain what you intend to achieve?

Is it possible to join two clips?

Similar Messages

Maybe you are looking for