Is it possible to join two songs so they always play together

Windows laptop going to ipad and ipod

As far as i know QuickTime can not support all kinds of AVI, and even it can join AVI files into one, the joined AVI files cannot be imported to iTunes, iPad, iPod, iPhone for playback.
I know a step by step guide on how to merge video files on Mac or Windows
This guide support join all kinds of video and audio formats like MP4, AVI, MPEG, MPG, VOB, MOV, RM, RMVB, 3GP, ASF, WMV, WTV, DVR, DivX, Xvid, M4V, MKV, FLV, F4V, SWF, WebM, OGV, Apple ProRes, AVCHD, MTS, M2TS, M2T, MXF, MVI, DAT, MOD, TOD, MPV, OGM, MP3, WAV, WMA, M4A, FLAC, M4B, AAC, AC3, APE, AIFF, Apple Lossless ALAC, VOC, QCP, AMR, AWB, DTS, AU, RA, OGG and etc
And you can join video files as well convert video to other video or audio formats or keep the same video format as the original one.
And you can also merger several video files even they are not in the same video format.
Hope it helps more or less

Similar Messages

Possible to Join Two Mono Tracks to Stereo, Or Change Panning of a Stereo?

In the new Garage Band 11, is it possible to Join Two Mono Tracks to Stereo, or Change the Panning of a Stereo track, or split a stereo track into two mono files?
Sometimes it would be convenient when I have a lot of tracks to combine two mono tracks into one stereo track to eliminate an additional track.
Also, I find that I often want to change the panning of a stereo track to either make it wider, or merge the two channels, even reverse L&R. If no way to change the panning of a stereo track can a stereo track be split into two mono tracks to be panned differently?

Woodwyn wrote:
is it possible to Join Two Mono Tracks to Stereo
only by exporting the two tracks
or Change the Panning of a Stereo track
you can pan a stereo track in every version of GB with the pan knob
or split a stereo track into two mono files?
indirectly:
http://www.bulletsandbones.com/GB/GBFAQ.html#stereotomono
(Let the page FULLY load. The link to your answer is at the top of your screen)
want to change the panning of a stereo track to either make it wider, or merge the two channels
that's different. no, you'd have to split the track into two mono files as described above.
even reverse L&R.
same answer

Is it possible to join two clips?

is it possible to join two clips?

Select them and use the "join" menuItem (though there's generally no reason to do so unless you're trying to save them as a loop)

Is there a way in iTunes to "stich" or combine songs? Example Journey's Anytime and Feeling That Way are always played together. Is there a way to combine them so they are not separate songs?

Is there a way in iTunes to "stich" or combine songs? Example Journey's Anytime and Feeling That Way are always played together on the radio. Or ZZ Tops Waitin' For the Bus and Jesus Just left Chicago are always played together. Is there a way to combine them so they are not separate songs?

Not in iTunes.
Are these ripped from a CD?
See hhgttg27s post here
-> https://discussions.apple.com/thread/6867148
If not, you will need to use another application to combine them such as this script...
-> http://dougscripts.com/itunes/itinfo/jointogether.php

Can songs be made to play together in shuffle mode?

Some songs are intended to play together like "Golden Slumbers" and "Carry That Weight" or "Moving in Stereo" and "All Mixed Up" and it drives me bananas when you get the first but not the second!
Is there any way to make it so songs play back to back in shuffle like they do when you listen to the album in order?

See the answer here.
http://discussions.apple.com/message.jspa?messageID=5623346#5623346

Hi does anyone know how i can get a refund on here i bought 3 songs and they dont play the full song.

hi does anyone know how i can get a refund on here i bought 3 songs and they dont play the full song.?
-Thanx you XO

First, how are you trying to play them? You need to play them by clicking on library on the left side of iTunes and clicking on music. The whle song will play by doing this.

How do I join two songs on separate tracks on Garage Band for the MacBook Pro?

I have two songs on two separate tracks that I'm trying to join into one. I highlighted both, but when I select edit, "join" isn't an option.

Just in case you have not found the solution on your own after this long wait -
if your tracks are real instrument tracks, "Join" will not work.
To combine the regions in the two tracks into one,
silence all other tracks,
select the regions you want to combine with the cycle region,
and then export this partial song to disk.
Reimport the joined audio file and you are done.
Regards
Léonie

Is it possible to join two single pages in a pdf into one double page spread?

Is it possible to take two single pages from separate pdf documents and combine them as one double page spread?
If it is possible could someone describe how it is done please?

The InDesign method Steve mentions is the best option. You can also place it in Illustrator as an import but you'll need to have the same fonts as the PDF file. This option will allow you to edit the files, pending what objects are editable. It will have a few quirks, and the text lines might be separate objects.
I'd go InDesign, but just in case you don't have ID, you can use Illustrator, but be prepared for a little work.

Where did the possibility to join two smooth endpoints into one go?

I used get a dialog box when joining two overlapping endpoint, that is if they truly were on top of each other. I would get a dialog box when selecting two endpoints and pressing cmd+j where I could choose either smooth or corner.
Now in Illustrator CS6 I do not get any dialog box no matter what I do and it always joins the two endpoints as corner even thoug they both started out as smooth - that is had both their arms. Is there another way to do this now?

Well ... since I use "Average and join" all the time and very seldom only "Join" I just switched the shortcuts, so now Join has the 4-keys shortcut.
Actually I can't think of a time I needed the corner join. Most of the time I use Pen Tool, and join paths with that, and with corner joins I just remove any excess points, but with more difficult smooth path constructions I find I often need the smooth join.
I never figured why one can't select more than one arm like you can select more than one point ... it would make altering symetric paths symetrically so much easier.

Is it possible to join two video files?

Is there any way i can use mac os to join two AVI files together, and then create a new copy of the combined video to show on my iPad. if i can avoid using iMovie that would be great.
thanks

As far as i know QuickTime can not support all kinds of AVI, and even it can join AVI files into one, the joined AVI files cannot be imported to iTunes, iPad, iPod, iPhone for playback.
I know a step by step guide on how to merge video files on Mac or Windows
This guide support join all kinds of video and audio formats like MP4, AVI, MPEG, MPG, VOB, MOV, RM, RMVB, 3GP, ASF, WMV, WTV, DVR, DivX, Xvid, M4V, MKV, FLV, F4V, SWF, WebM, OGV, Apple ProRes, AVCHD, MTS, M2TS, M2T, MXF, MVI, DAT, MOD, TOD, MPV, OGM, MP3, WAV, WMA, M4A, FLAC, M4B, AAC, AC3, APE, AIFF, Apple Lossless ALAC, VOC, QCP, AMR, AWB, DTS, AU, RA, OGG and etc
And you can join video files as well convert video to other video or audio formats or keep the same video format as the original one.
And you can also merger several video files even they are not in the same video format.
Hope it helps more or less

I purchased two songs and can't play them

I purchased two songs on iTunes from the same album but when I try to play them, I get an error message that says, "This computer is already associated with an Apple ID. You can download past purchases on this computer with just one Apple ID every 90 days. This computer can be used with a different Apple ID in 78 days." I am the only one who uses the iMac and am the only person who has signed into it for a very long time. I'm very confused and very frustrated. Help?
Another strange thing that happens: after the error message disappears, the "play" icon (the little speaker to the left of the track name indicating it's playing) rapidly switches between the two songs.

This happens when you buy using one ID and you have authorised the Mac with another ID.

I bought two songs and they both skip. Help?

Almost a week ago I bought two songs from Itunes using a gift card and they downloaded perfectly fine. The second I went to listen to one, at first, everything was fine but then it skipped like a minute of a four minute song. The second song only plays two minutes of a five minute song. I've already re-downloaded the new Itunes software AND the songs but it's still ****** up. Any suggestions?

Open Store > View My Account > Purchase History. Click the Report a Problem button and then the Report a Problem link for the items in question. Follow the prompts from there on...
tt2

I bought two songs, and they were there a while ago, but now when i want to play it, it isnt even there.

can someone help me???

Hello, jaclyn221.
You do have the ability to download most past purchases through the iTunes store. Below I have included two articles that will help you with this issue. The first article goes over how to delete media from your iTunes library if the media is listed but not able to play as it is not located. The second article goes over how to download past purchases.
Deleting files from the iTunes library and your computer
http://support.apple.com/kb/ht3842
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Cheers,
Jason H.

Trying to 'merge' two songs so they dont get lost in shuffle

I have several tracks that are lead-ins to the following track.
Is there any way to keep them together when I throw the playlist into shuffle?
Sarah
Macbook with iTunes 7.0.2

You could put the original CD back in, and use the Join CD Tracks option to import them as a single file.
Patrick

I preordered a abulm and it gave me two songs when they came out but now it wants me to buy it again what do i do

Please help me get the rest of the ablum so i can listen to some new music

To re-identify an incorrectly identified CD: "Insert the CD and select it in iTunes, then menu Advanced > Get CD track names. It should requery the Gracenote database and let you pick the correct album." - https://discussions.apple.com/message/18901866

Is it possible to join two songs so they always play together

Similar Messages

Maybe you are looking for