Is it possible to let the installer write vpd.properties to somewhere else?

Hi Experts,
I want to check whether it is possible to let the installer write vpd.properties etc files into a local directory, but not always into /var/adm/siebel. Is there a way to do that?
Thanks!

Just curious. Why would you want to do this?
<br>
<br>
Chung
<br>
<br>
Application Management Blog

Similar Messages

  • Is it possible to change the read/write permissions on a time machine back-up of iTunes? I need to restore it, but old version is locked....

    Is it possible to change the read/write permissions on a time machine back-up of iTunes? I'm needing to restore it as my phone deleted half our playlists during sync  & am not seeing a way to unlock the permissions. I have the current version unlocked, but can't seem to get the backed-up version. When I click on restore I get a pop-up that says iTunes can't be deleted as it is part of the OS. I'm not even trying to delete, just restore the old version. Any suggestions?

    Hmmm, ok I'll give it a shot. I've always had the iTunes sync w/ my phone set up to only load selected playlists to the phone b/c there's a lot more in iTunes than I have room or desire for on my phone. A few months back I started having trouble w/ trying to sync everything & subsequently adding more to the phone than it could hold. The quickest thing at the time was to unclick the sync music option in iTunes so I could still backup the phone to the computer & not have a problem.
    When I asked about it during one-to-one session shortly after, they advised me to delete the music off my phone & then re-sync it to the computer, run a backup of the phone & redownload the music to the phone. When I tried this it ended up deleting all my playlists (but not my husband's) from iTunes. Irritating, but I've been rebuilding the playlists since. I had also unclicked sync music again & an Apple person told me the most likely best fix was to delete & reload iTunes completely.
    A few days ago I realized I hadn't backed up the phone to the computer in over a month so after deleting & reinstalling iTunes, & w/o changing anything (sync music was STILL unchecked) I ran a backup & my phone went from having 4 GB free space to being 2 GB over capacity due to iTunes trying to download the entire music library to the phone. I made a one-to-one appt again & it was suggested AGAIN that I delete all the music off my phone & then resync it to the computer & redownload the music. We did this (though a few random songs that had previously been purchased somehow remained on the phone), I got home, connected the phone & instead of the music that shows  as 'on my device' disappearing from iTunes it just sat there, so, as the guy had told me I MIGHT have to do, I threw all those songs showing in iTunes as being on my phone, in the trash so that it was completely clear.
    At this point I checked sync music, made sure the options were 'selected playlists only', checked the ones from my own list that I wanted (I usually have one playlist of comedians from my husband's folder that I also have on the phone, but didn't check it at this point). It uploaded all my stuff just fine, but for whatever reason when it saw that I wasn't uploading that comedy playlist any longer, it not only didn't upload it but proceeded to delete my husband's entire folder of playlists from iTunes. -_- I got on the phone w/ an Apple support person right away but he wasn't able to tell me anything .. basically said we'll have to rebuild everything. I asked about the possibility of using time machine, he said he's not qualified to answer that, so that's when I started looking around online & found, among others, the link I referenced a couple replies ago.
    I hope this all makes sense. It's been a long-term issue so I'm trying to go from memory as I figured to begin w/ that I had just made a mistake somewhere, so didn't try to document anything. Now w/ it having happened a 2nd time, I'm not sure if it was 'user error' or something else.......

  • Is it possible to let the TS-HD go sleep when not in use

    is it possible to let the Time Capsule HD go idle when not in use for saving energy?

    If the Time Capsule is functioning normally, the hard drive will spin up automatically when a Time Machine backup begins and spin down after the backup is completed.
    My Time Capsule normally runs for a minute or two for the backup each hour....otherwise the drive is not active.

  • Whats better for my mbp 2013 retina in the long run? Keep it plugged in as much as possible or letting the battery hit 10% and then recharge it?

    Whats better for my mbp 2013 retina in the long run? Keep it plugged in as much as possible or letting the battery hit 10% and then recharge it?

    Odd you ask that, since both are HORRIBLE,   ... especially often draining your battery low.
    General consideration of your MacBook battery
    Contrary to popular myths about notebook batteries, there is protection circuitry in your Macbook and therefore you cannot ‘overcharge’ your notebook when plugged in and already fully charged.
    However if you do not plan on using your notebook for several hours, turn it off (plugged in or otherwise), since you do not want your Macbook ‘both always plugged in and in sleep mode’.
    A lot of battery experts call the use of Lithium-Ion cells the "80% Rule", meaning use 80% of the full charge or so, then recharge them for longer overall life. The only quantified damage done in the use of Lithium Ion batteries are instances where the internal notebook battery is “often drained very low”, this is bad general use of your notebook battery.
    A person who has, for example, 300 charge cycles on their battery and is recharging at say 40% remaining of a 100% charge has a better battery condition state than, say, another person who has 300 charge cycles on their battery and is recharging at say 10-15% remaining on a 100% charge. DoD (depth of discharge) is much more important on the wear and tear on your Macbook’s battery than the count of charge cycles. There is no set “mile” or wear from a charge cycle in specific. Frequent high depth of discharge rates (draining the battery very low) on a Lithium battery will hasten the lowering of maximum battery capacity.
    All batteries in any device are a consumable meant to be replaced eventually after much time, even under perfect use conditions.
    If the massive amount of data that exists on lithium batteries were to be condensed into a simplex, helpful, and memorable bit of information it would be:
    1. While realistically a bit impractical during normal everyday use, a lithium battery's longevity and its chemistry's health is most happy swinging back and forth between 20% and 85% charge roughly.
    2. Do not purposefully drain your battery very low (10% and less), and do not keep them charged often or always high (100%).
    3. Lithium batteries do not like the following:
    A: Deep discharges, as meaning roughly 10% or less on a frequent basis.
    B: Rapid discharges as referring to energy intensive gaming on battery on a frequent basis (in which case while gaming, if possible, do same on power rather than battery). This is a minor consideration.
    C: Constant inflation, as meaning always or most often on charge, and certainly not both in sleep mode and on charge always or often.
    From Apple on batteries:
    http://www.apple.com/batteries/notebooks.html
    http://support.apple.com/kb/HT1446
    "Apple does not recommend leaving your portable plugged in all the time."
    Keep it plugged in when near a socket so you keep the charging cycles down on your LiPo (lithium polymer) cells / battery, but not plugged in all the time. When not being used for several hours, turn it off.
    DoD (depth of discharge) is far more important on the wear and tear on your Macbook battery than any mere charge cycle count.  *There is no set “mile” or wear from a charge cycle in general OR in specific.    As such, contrary to popular conception, counting cycles is not conclusive whatsoever, rather the amount of deep DoD on an averaged scale of its use and charging conditions.
                              (as a very rough analogy would be 20,000 hard miles put on a car vs. 80,000 good miles being something similar)
    *Contrary to some myths out there, there is protection circuitry in your Macbook and therefore you cannot overcharge it when plugged in and already fully charged
    *However if you don’t plan on using it for a few hours, turn it OFF (plugged in or otherwise) ..*You don’t want your Macbook both always plugged in AND in sleep mode       (When portable devices are charging and in the on or sleep position, the current that is drawn through the device is called the parasitic load and will alter the dynamics of charge cycle. Battery manufacturers advise against parasitic loading because it induces mini-cycles.)
    Keeping batteries connected to a charger ensures that periodic "top-ups" do very minor but continuous damage to individual cells, hence Apples recommendation above:   “Apple does not recommend leaving your portable plugged in all the time”, …this is because “Li-ion degrades fastest at high state-of-charge”.
                        This is also the same reason new Apple notebooks are packaged with 50% charges and not 100%.
    Contrary to what some might say, Lithium batteries have an "ideal" break in period. First ten cycles or so, don't discharge down past 40% of the battery's capacity. Same way you don’t take a new car out and speed and rev the engine hard first 100 or so miles.
    Proper treatment is still important. Just because LiPo batteries don’t need conditioning in general, does NOT mean they dont have an ideal use / recharge environment. Anything can be abused even if it doesn’t need conditioning.
    Storing your MacBook
    If you are going to store your MacBook away for an extended period of time, keep it in a cool location (room temperature roughly 22° C or about 72° F). Make certain you have at least a 50% charge on the internal battery of your Macbook if you plan on storing it away for a few months; recharge your battery to 50% or so every six months roughly if being stored away. If you live in a humid environment, keep your Macbook stored in its zippered case to prevent infiltration of humidity on the internals of your Macbook which could lead to corrosion.
    Considerations:
    Your battery is subject to chemical aging even if not in use. A Lithium battery is aging as soon as its made, regardless.
    In a perfect (although impractical) situation, your lithium battery is best idealized swinging back and forth between 20 and 85% SOC (state of charge) roughly.
    Further still how you discharge the battery is far more important than how it is either charged or stored short term, and more important long term that cycle counts.
    Ultimately counting charge cycles is of little importance.  Abuse in discharging (foremost), charging, and storing the battery and how it affects battery chemistry is important and not the ‘odometer’ reading, or cycle counts on the battery. 
    Everything boils down to battery chemistry long term, and not an arbitrary number, or cycle count.
    Keep your macbook plugged in when near a socket since in the near end of long-term life, this is beneficial to the battery.
    In a lithium battery, deep discharges alter the chemistry of the anode to take up lithium ions and slowly damages the batteries capacity for the cathode to transport lithium ions to the anode when charging, thereby reducing max charge levels in mAh. In short, radical swings of power to lithium cells disrupts the chemical ecosystem of the battery to hold charges correctly which likewise impedes the perfect transfer of lithium ions both in charging and discharging.  In charging your lithium battery, lithium ions are “pushed uphill” (hard) to the anode, and discharged “downhill” (easy) to the cathode when on battery power. Deep discharges, damages this “upward” electrolyte chemistry for the battery to maintain a healthy charge and discharge balance relative to its age and cycles.
    Optimally, in terms of a healthy lithium battery and its condition, it is most happy at 50% between extremes, which is why low-power-drain processors such as the Haswell are ideal on lithium battery health since a partially charged battery with a low-drain processor has, in general, much more usage in hours
    Battery calibration, battery memory, battery overcharging, battery training, …all these concepts are mostly holdovers from much older battery technology, and on older Apple portable Macbooks ranging from early nicads, NiMh and otherwise; and these practices do not apply to your lithium battery and its smart controllers.
    Calibrating the battery on older Apple portable Macbooks with removable batteries.
    http://support.apple.com/kb/PH14087
    There is no calibration of current Apple portable Macbooks with built-in batteries.
    http://support.apple.com/kb/ht1490
    There is no battery calibration with current Apple portable Macbooks with built-in batteries. Lithium batteries have essentially a 0-‘memory’, and all such calibration involve the estimations fed to the system controller on the SOC (state of charge) of the battery over long periods of time as the battery degrades. The software based battery controller knows the battery's characteristics, or SOC and adjusts itself. This is why there is both no need and purpose to periodically deeply drain your macbook battery, since it doesn’t affect the characteristics of the battery, and further still deep discharges are something you should not do on purpose to any lithium battery.
    From BASF: How Lithium Batteries work
    https://www.youtube.com/watch?v=2PjyJhe7Q1g
    Peace

  • Is it possible to enter the lock screen with itunes or something else because i've damaged my phone and the touch screen is damaged that i'm not able to unlock it to make a backup on itunes

    is it possible to enter the lock screen with itunes or something else because i've damaged my phone and the touch screen is damaged that i'm not able to unlock it to make a backup on itunes ?
    it would be very important to put the data from iphone 5 to my new 5s ..
    looking forward to get some help
    thx

    You cant unlock your phone unless you put in your password. It may be possible that the apple store could do something about it.

  • Is it possible to change the settings in AR Properties Advanced tab with Adobe Acrobat XI?

    I noticed when I went to print a PDF double sided, that despite the following the guidelines from Adobe on this process, it still printed single sided.  I checked the properties of the PDF itself and on the Advanced tab, the DuplexMode was set to Simplex and was greyed out.
    Is it possible to change the settings in that tab with Adobe Acrobat XI?
    Regards
    Sharon

    Dear Sara
    Thank you for your reply.
    I have two printers, both support automatic duplexing.  Any PDF we receive
    or create we are unable to print double sided on our mac mini¹s.  I didn¹t
    make it clear in my question that we were fine on Windows XP, but, having
    recently changed to Mac have encountered this frustrating problem.
    I did a lot of research prior to recording the question and it appears I am
    not the only one who has come across this problem, and I have followed the
    guidelines that Adobe promote on their website to be able to print double
    sided, which doesn¹t work on the mac mini Osx Mavericks.
    Because the Properties, Advanced tab has ³Print Dialog Presets² that are set
    to simplex  and greyed out I took that to mean that no matter what printer
    settings I make, and I think I¹ve gone through all that I can, the pdf will
    not print double sided on Mac but will on XP.
    Sorry this isn¹t the reply you must have been hoping for and look forward to
    receiving further advice in regard to this matter.
    Regards
    Sharon

  • Is it possible to let the SecurityManager ask the user for permissions?

    Hi there!
    I would like to write an applet which should realize single-sigon via JAAS and for jaas I need some access to the underlaying os which is permitted by the security manager.
    I dont want to buy a certificate or to go through all our (700) Computers and install my self-made certificates and change the policy file.
    So is there a way to let java ask the user if it trusts the applet (may with remeber this desision) to e.g. let it access features needed for jaas.
    This way can be direct (via api call) or not (applet signed via free long valid (at least 5 years) certificate), however the only important thing is that I get access to the system.
    Any ideas, I would be happy about (nearly g) everything ;-)
    Thanks a lot, lg Clemens

    However thanks a lot for help g
    Found the answer myself: Simply sign the applet with an self-made certificate, the next time the browser is restartet there will be a promt for acceptimg the certificate.
    Cool!

  • Is it possible to let the headset button work on some devices?

    I am using surface pro 3 as my music player. So sometimes I just don't want to switch applications to make the music stop. I have a headset and my computer successfully recognized the microphone on it. So, is it possible to also make the buttons (Play/pause,
    Volume+/-) work?

    def, either visit a apple retail store or call apple care 18002752273. Make sure you have warranty if not it will cost 65$ to repair replace.

  • Is it possible to call the java compiler javac from runtime

    Hi, can someone tell me if it is possible to call javac from runtime. I need to do this because the class I need to compile must be filled with some data given by the user. I plan to write the class code in a file, let the user write some code lines at runtime, add this lines to the file and then call javac in order to compile the file and check if the user wrote his lines properly. I wonder if this makes sense, thanks for reading this and for your help.

    You can try using the exec method in the class java.lang.Runtime, but here are some traps to watch out for when using it:
    http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html

  • Source path of the installer

    Hello,
    at the first start of  my labview application (after the installation) I want to copy some files from the "installation drive" to the harddisk.
    For this I need the source path of the installer, but I doesn´t  know where to get it.
    Can I read it with a labview system VI oder is the path anywhere in the registry (or can the installer write it in the registry)?
    jan9101
    PS: the files should NOT be copied by the Installer, they must be copied by the labview program.
          LV 8.6.1 

    Another option is to add the files to your project (or an autopopulating folder), and create a distribution for these items.
    In the installer you can include this distribution and the files should be copied.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • Letting the user choose the amount of questions to a random quiz

    is it possible to Letting the user choose the amount of questions to a random quiz taken from a question pool?

    Hi Paul,
    you could check the source code of the http://osmf.org/dev/1.5gm/youtube-googleanalytics.html page. The js script code creates the embed code on page load.
    After the object is created, I obtain a generated embed code similar to:
    <object id="StrobeMediaPlayback" width="640" height="480" type="application/x-shockwave-flash" name="StrobeMediaPlayback" data="StrobeMediaPlayback.swf" style="visibility: visible;">
    <param name="allowFullScreen" value="true">
    <param name="flashvars" value="src=http://movie/.....&plugin_ga=GTrackPlugin.swf&ga_http://www.realeyes.com/osmf/plugins/trac king/google=%3Cvalue%20key%3D%22reTrackConfig%22%20type%3D%22class%22%20class%3D%22com.rea leyes.osmf.plugins.tracking.google.config.RETrackConfig%22%3E%09%09%20%20%20%20%20%20%20%2 0%3Caccount%3EUA-7184501-2%3C/account%3E%09%09%20%2...l%3D%22start%22%20/%3E%09%09%20%20%2 0%20%20%20%20%20%20%20%20%20%20%20%20%20%3Cmarker%20time%3D%2220%22%20label%3D%22start%22% 20/%3E%09%09%20%20%20%20%20%20%20%20%3C/event%3E%09%09%20%20%20%20%20%20%20%20%3Cdebug%3Et rue%3C/debug%3E%09%09%20%20%20%20%20%20%20%20%3CupdateInterval%3E250%3C/updateInterval%3E% 09%09%09%3C/value%3E&src_namespace_realeyes=http://www.realeyes.com/osmf/plugins/tracking/ google&src_realeyes_pageURL=page%20description&javascriptCallbackFunction=onJavaScriptBrid geCreated">
    </object>
    You will have to urlencode the XML data in order to use the plugin, I think this is where you are stuck.
    Does this help create your own code?
    P.S. regarding the contents of the XML string, you will have to personalize it for you own purposes.

  • After download itunes installation began in windowx xp near the end of the installation the message says: it was not possible to write the value to the key Software / Classes / .mpg / OpenWithList / iTunes / .exe. Already reinstalled 3 times and always sa

    After download itunes installation began in windowx xp near the end of the installation the message says: it was not possible to write the value to the key Software / Classes / .mpg / OpenWithList / iTunes / .exe.
    Already reinstalled 3 times and always says the same message.
    thank you

    Only two had virus on windows XP this week and wiped them with Avast. The itunes asked me to install the update, and so I did. but it always gives me that message.

  • Is it possible to get the style, font and related info of a paragraph of a in design file and write it on the same in design file  on the  left side

    Is it possible to get the style, font and related info of a paragraph text  of a in design file and write  all the stuff on the same in design file  on the  left side with small fonts 
    as
    Lets  this is a text in in design file    :
    style : abc                      we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultur we are going to check the  condition  Agence Wallonne pour la    font 12                                  d'une Agricultu we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultu
    style : xyz                      we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultur we are going to check the  condition  Agence Wallonne pour la    font 10                                  d'une Agricultu we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultu

    Hi Poojith
    Not sure if this would solve your requirment but just in case might be helpful:
    1. We can mix up the HTML and HTMLB components in the JSP Page. However, can access only the HTMLB components in the controller. The following link refers to what customizations are offered by the HTMLB framework:
    [http://www.sapdesignguild.org/resources/htmlb_guidance/]
    2. Another option would be to use AbstractPortalComponents or a simple web app if that's feasible. (where custom UI themes, css and layout are more in control of the developers.)
    Thanks
    Deepak

  • I would like to ask if is possible to predict a future version of iOS can have the possibility to choose the color with which to write and be able to choose the character also...

    I would like to ask if is possible to predict a future version of iOS can have the possibility to choose the color with which to write and be able to choose the character also...

    Nobody here would have a crystal ball and know what Apple plans on doing in the furture.
    If you feel this feature is so important, you can let Apple know:
    www.apple.com/feedback

  • In iCal and Notifications on a notebook, is it possible to expand the notes window to make it easier to read and write notes?

    In iCal and Notifications on a notebook, is it possible to expand the notes window to make it easier to read and write notes? In the past, I have used Outlook calendar and tasks and I was able to expand the windows which allowed me to put a great amount of details into either the notes section in events and tasks. It would be great to be able to do this in iCal and Notifications as well. I am using a Macbook Pro with OS X 10.8. Thank you very much for assistance with this.

    HI,
    Try Spaces for a virtual desktop.
    http://www.ehow.com/how2189851use-spaces-mac-os-x.html
    Carolyn

Maybe you are looking for