Is it possible to load 4.3.3 on IPAD 2 as of 7/29/11?
Is it possible to load 4.3.3 on IPAD 2 as of 7/29/11? I don't have any SHSH blobs. I don't think it is, but would really like to know if anyone has been able to get this to work. I am at 4.3. Many thanks in advance!
Sorry - I wasn't actually implying that you did jailbreak - I just couldn't be sure when you made reference to the article.
Apple does not support "downgrading" the iOS so you cannot downgrade the iOS. Unless you can restore from an old backup - before you updated to 4.3.4 or 4.3.5. I don't even know if that would work actually because when you restore I would assume that iTunes would want to place the most recent iOS on the device.
I believe that the ipsw files are for use if you can't download the upgrade directly from iTunes - like maybe your Internet connection at home is a "dog" so you go somewhere that you can get a good download - without having to be connected to iTunes - and then you install like KP suggested. The ipsw files will only work for upgrades. - I think!
Similar Messages
-
Is it possible to load a PDF into the ipad Photos app?
I deal with documents that then have to be sent to a specific site that only accepts .doc, .docx, pdf.
I can't e-mail them, because the site must access iPad so that the documents are correctly received and accounted for.
That site can only access the iPad's Photos, nowhere else.
Is it possible to load one of these three formats into the ipad Photos app?Thanks Diavonex, but that doesn't work (see my question).
I can easily produces JPGs and load them into Photos, but the site in question can't access them ( it only accepts .doc, .docx, PDF). -
Urgent - Is it possible to Load a DLL in ABAP ?
Hi All,
Is it possible to Load a DLL from ABAP ? If so how ?
Thanks
Sunil.MHi sunil,
1. Its not possible for DLL,
but if its Activex EXE,
(ie. OLE concept is there),
2. then it can be done.
regards,
amit m. -
Is it possible to load same vi in several subpanel ??
Hi,
Is-it possible to load same vi in several sub-panel on a vi ????
Eddy DUCHENE
12 F Chemin de Boutary
69300 CALUIRE ET CUIRE
[email protected]Well - as far as I know, that is not possible.
If you try it with just two subpanels and the same vi to place in the subpanel, you once get error 1145 (LabVIEW: Cannot open VI because it is already in a subpanel control.).
One way you could code a similar functionality was the usage of a tab-control. You could place your "views" on 5 tabs, make the tab-registers invisible and access the single tabs using a drop-down.
Using LV8.0
Don't be afraid to rate a good answer... -
Is it possible to load a non-standard image using some Java API?
Hi,
My "problem" is:
1. I have an image called "mediterranean_sea.IMG" (non-standard image format)
2. I need to process it (histogram, palette, etc).
3. I'm wondering if it is possible to load this image an process it using some Java API.
4. I've tried to do this using JAI but I think that this API only works with TIFF, PNG, JPEG, etc.
Any idea?
Thanks in advance,
Roger[url http://forum.java.sun.com/thread.jsp?thread=468188&forum=31]Cross-post
-
Is it possible to load a dump file collected from sql server to orcle 10gR2
Hi..
As a part of data migration from legacy systems , we need to migrate only required tables from Sql server to Oracle 10gr2 .
At present client is telling that he will give it as dump file.
My question is , Is it possible to load the dump file collected from sql server to oracle 10gR2?
Thanks in advance ..yes, it is.
Using for example SQL Developer Migration Workbench even allows you to create unload scripts for the desired SQL Server tables and it also creates the DDL scripts for you to create the Oracle tables similar to the SQL Server table AND it alows creates the SQL*Loader scripts that allow you to load the SQL Server generated dump file into the Oracle db.
Here the link:
http://www.oracle.com/technology/tech/migration/workbench/index_sqldev_omwb.html
If you do not want to use this utility, you can also use SQL*Loader to load the content of the SQL Server dump file into the Oracle database; but in this case you have to write the whole SQL*Loader control scripts on your own.
Edited by: kgronau on Sep 16, 2009 1:54 PM -
Is it possible to load a URL on stage?
Hi,
I'm using Flash CC-Action Script 3, is it possible to load a URL onto the stage?Thanks. I think our IT department will handle it since they do html/java/and
all that stuff except for action script/flash. I am a little desperate
though. I need to have this at least display a working clock for know and
the phone list, which will display fine once I get to it. Can you be so kind
and look at my horrible action script and help me get the clock to work
continuously and show minutes under 10 with a "0"? I just need to have
something to show for our Annual Management meeting.
Thank you sincerely for your time.
Code:
import flash.events.MouseEvent;
import flash.text.TextField;
import flash.text.Font;
import flash.text.TextFormat;
import flash.display.Sprite;
import flash.text.*;
import flash.filters.BitmapFilter;
import flash.filters.BitmapFilterQuality;
import flash.filters.BlurFilter;
import flash.display.Bitmap;
import flash.display.Loader;
import flash.net.URLRequest;
var link:URLRequest = new URLRequest("http://simplegreen.com/");
//ADD CONTAINERS
var containerStage:Sprite = new Sprite();
containerStage.tabChildren = false;
stage.addChild (containerStage);
//DATE TIMER
var my_date:Date = new Date();
var my_timer:Timer = new Timer(1000);//create a new timer that ticks every
second
my_timer.addEventListener(TimerEvent.TIMER, onTimer);
my_timer.start();
//MONTH AND DATE
var months:Array = ["Jan", "Feb", "Mar", "Apr", "May", "June", "Jul", "Aug",
"Sept", "Oct", "Nov", "Dec"];
var days:Array = ["Sun", "Mon", "Tues", "Wed", "Thurs", "Fri"];
var todayIs = (days[my_date.day] + "," + " " + months[my_date.month] +" " +
my_date.date + " " + my_date.fullYear);
trace(days[my_date.day] + "," + " " + months[my_date.month] +" " +
my_date.date + " " + my_date.fullYear);
//Text Loader
var textLoader:URLLoader = new URLLoader();
textLoader.addEventListener(Event.COMPLETE, textLoaded);
textLoader.load(new URLRequest("assets/phoneList.txt"));
var ampm:String = new String();
var zero:String = new String();
if (my_date.hours<12) {ampm = "AM";
else{
ampm = "PM";
while(my_date.hours > 12){my_date.hours = my_date.hours - 12;
if(my_date.minutes < 10){zero = "0" + my_date.minutes;
else{
my_date.minutes;
function onTimer(e:TimerEvent):void {
//my_date = new Date();
trace(my_date.hours + ":" + my_date.minutes);
var myDateTextBox:TextField = new TextField;
myDateTextBox = new TextField();
// myDateTextBox = todayIs;
var dateStyle:TextFormat = new TextFormat;
dateStyle.color = 0xFFFFFF;
dateStyle.size = 48;
dateStyle.font = "myriadMm";
dateStyle.align = "left";
var myTimeTextBox:TextField = new TextField;
myTimeTextBox = new TextField();
myDateTextBox.text = String(days[my_date.day] + "," + " " +
months[my_date.month] +" " + my_date.date + " " + my_date.fullYear);
myDateTextBox.width = 600;
myDateTextBox.x = 70;
myDateTextBox.y = 70;
myDateTextBox.setTextFormat(dateStyle);
//Add it to the stage;
containerStage.addChild(myDateTextBox);
myTimeTextBox.text = String(my_date.hours + ":" + my_date.minutes + " " +
ampm);
myTimeTextBox.width = 600;
myTimeTextBox.x = 70;
myTimeTextBox.y = 117;
myTimeTextBox.setTextFormat(dateStyle);
//Add it to the stage;
containerStage.addChild(myTimeTextBox);
//Event Listeners
phone.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame);
function fl_ClickToGoToAndPlayFromFrame(event:MouseEvent):void
trace("directory ready");
simpleGreen.addEventListener(MouseEvent.CLICK,
fl_ClickToGoToAndPlayFromFrame_2);
function fl_ClickToGoToAndPlayFromFrame_2(event:MouseEvent):void
navigateToURL(link, "_self");
videoDirectory.addEventListener(MouseEvent.CLICK,
fl_ClickToGoToAndPlayFromFrame_3);
function fl_ClickToGoToAndPlayFromFrame_3(event:MouseEvent):void
trace("Video Player is Ready");
function textLoaded(evt:Event):void
info_txt.htmlText = textLoader.data;
With warmest regards,
Mary Crotteau
Graphic Design Specialist
Sunshine Makers, Inc./Simple Green -
Is it possible to load a xdp file into a subform?
Is it possible to load a xdp file into a subform?
That worked with an existing fragment.
What i'm tryin to do is generate a xdp file like (which i can open in the designer as preview pdf correctly), and insert this as subform.
<?xml version="1.0" encoding="UTF-8"?>
<xfa>
<template xmlns="http://www.xfa.org/schema/xfa-template/2.8/">
<subform name="TopmostSubform">
<pageSet name="PageSet">
<pageArea name="MasterPage1" id="p1">
<contentArea name="ContentArea" x="0pt" y="0pt" w="595.3pt" h="841.9pt"/>
<medium stock="a4" short="595.3pt" long="841.9pt" orientation="portrait" imagingBBox="none"/>
</pageArea>
<pageArea name="MasterPage2" id="p2">
<contentArea name="ContentArea" x="0pt" y="0pt" w="595.3pt" h="841.9pt"/>
<medium stock="a4" short="595.3pt" long="841.9pt" orientation="portrait" imagingBBox="none"/>
</pageArea>
</pageSet>
<subform name="Page1" w="595.3pt" h="841.9pt">
<draw name="Text" x="59.25pt" y="117pt" minW="400.25pt" minH="12pt">
<ui>
<textEdit multiLine="1"/>
</ui>
<value>
<exData contentType="text/html">
<body xmlns="http://www.w3.org/1999/xhtml" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/"><p style="text-align:justify;font-family:Verdana;font-size:10pt">Assunto: Apólice nº #MC_Apolice_MC# - Actualização de Condições 2012/2013</p></body>
</exData>
</value>
<para/>
</draw>
<draw name="Text" x="59.25pt" y="141pt" minW="88.25pt" minH="12pt">
<ui>
<textEdit multiLine="1"/>
</ui>
<value>
<exData contentType="text/html">
<body xmlns="http://www.w3.org/1999/xhtml" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/"><p style="text-align:justify;font-family:Verdana;font-size:10pt">Estimado Cliente,</p></body>
</exData>
</value>
<para/>
</draw>
<draw name="Text" x="59.25pt" y="165.75pt" w="490.25pt" minH="24pt">
<ui>
<textEdit multiLine="1"/>
</ui>
<value>
<exData contentType="text/html">
<body xmlns="http://www.w3.org/1999/xhtml" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/"><p style="text-align:justify;font-family:Verdana;font-size:10pt">Aproximando-se a data de renovação do seu seguro de saúde Multicare, vimos informá-lo das alterações que ocorrerão na sua apólice a partir de #MC_Dt.Inicio_MC#.</p></body>
</exData>
</value>
<para/>
</draw>
<draw name="Text" x="59.25pt" y="201.75pt" minW="155pt" minH="12pt">
<ui>
<textEdit multiLine="1"/>
</ui>
<value>
<exData contentType="text/html">
<body xmlns="http://www.w3.org/1999/xhtml" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/"><p style="text-align:justify;font-family:Verdana;font-size:10pt;font-weight:bold">Reforç ;ámos a sua proteção</p></body>
</exData>
</value>
<para/>
</draw>
</subform>
</subform>
</template>
</xfa> -
Is it possible to load a request already updated in the data target ?
Hi Experts,
Question: load a request which is already updated in data targets and data mart status is set
Data flow:
source system -
> ODS1 -
> Infocube1
Now, requests are first loaded into ODS1. Then these request are loaded into Infocube1.
Now, i deleted the request in the Infocube1.
Is it possible to reload the request from ODS1 to Infocube1 ?
Please suggest how.
Regards,
Suraj S NairHi Masthan Kaniganti ,
It is possible to load the data but not same request.
The reason why we can not load the request is in ODS level delta resords are updated ,hence with the selection condition we have to load the present and previous data.
and one more thing...
If you are deleted request in Cube level means, we can reconstuct the same request via reconstruction tab..
Hope this helps you...let me know if you any further ifo on this..
Best Regards,
maruthi -
FireFox 3.6.15 and newer require OS 10.5 or 10.6. The latest version of OS X the Macintosh G4 I own is physically capable of running is OS 10.4.11. Whenever I try to attach a file to an email in gmail.com or ymail.com, FireFox crashes. Is it possible to load a version of FireFox older than 3.6.15 to avoid having to buy a new computer?
Hi again - since writing the above I have posted on Adobe>Webplayer>Flash forum the following request and will post on here if I receive a reply that works:
Firefox updated to 3.6.14 and then advised Flash 10 be installed. I did this and now on YouTube videos all I see is a black screen with no play or pause button. System is OS X10.4.11 Have now followed Adobe instructions to Uninstall Flash player on system and then Install Flash 10. But still at YouTube Safari says Flash 10 is needed and in FF shows a black box only. I use Intego virus barrier but this has never blocked an update before. Flash is enabled in Firefox and Safari.
eldnolb at Adobe forum advised: Go to this site and right click on the Flash logo, Settings, Display Settings. UNcheck the hardware acceleration.
http://www.adobe.com/software/flash/about/
But when I go to this page no logo appeared for me to right click on, which again means that Flash player is not working... so I could not access Settings, Display Settings, Uncheck etc. Was advised to start a new Mac entitled thread. Clare -
Is it possible to load an IPAD from two different ITune accounts? When I try it says it'll delete all the other account first.
This is correct.
Ipad wilol sync itunes content and pics with one and only one computer at a time. Syncing to another will erase the current content. -
Hi!
I need to load a GET url that si very long. On other browsers, I can load the url. In firefox 3.6, no.
There is an addons or a plugin so I can extend this limit? If yes, is possible to load automatically this addons when loading a certain page? thanks
The url is sometingh like this (this is correctly loaded, but it could be longer)Firefox should have problems with long GET data appended to an URL (long would be over 64k).<br />
If there are problems then it is possible that an extension is the cause of that.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
Inserted CD is not shown in Finder, neither possible to load nor to get it out again...
Restart with pressed left Mouse button or Reset didn't help...
Any idea? ThxHave you tried using Disk Utility? Utilities Folder>Disk Utility, hopefully the CD will be listed on the left. Select it and then click on the 'eject' butoon.
Edit: If that didn't work, here's a few more suggestions: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD -
Hi All,
I have a requirement to load data from flatfiles stored on particular location, on a machine on which BODS client istallation is there.
I am able to create a flat file format by browsing the file location and giving file name.I can view the file data also.
But when I execute the job, job failswith the error "Cannot open file <D:/BODS_flatfiles/result.txt>. Check its path and permissions".
Please let me know whether it is possible to load data from flat file on a local machine, which has BODS4.2 client installated on it or the flat file should reside in a path in BODS job server ?
Thanks,
DeepaHi Deepa,
If you get solution then please mark answer as correct and close the tread!
Thanks,
Swapnil -
Hey,
is it possible to load my tracks, made by Logic pro 8, to Logic pro X.
Thanks for your help.Yes, it is possible!
Regards
Maybe you are looking for
-
Reference of sales area in follow-up action of sales support
Hello Experts, our client need to create a follow-up action from a contact (sales support document) in reference of a billing document. In the follow-up action the system takes automatically the sales area of the contact and leaves these field unchan
-
Error while running the initialize service to create a new application
Hi, I tried running the initialze service,when I encountered this error.Can anyone help me whith this. Setting EAC provisioning and performing initial setup... [03.20.13 23:32:37] INFO: Checking definition from AppConfig.xml against existing EAC prov
-
ALV check box in a cell uneditable for already checked entry
Hi all, I have written program to display ALV with a column having check boxes. I have requirement to make ALV-chech box in a cell uneditable for some other login for already checked entry. Please guide me for the same..
-
SQL Server 2014 Snapshot agent duplicating constraints
Hello, We are upgrading our server from SQL Server 2008 R2 Std. Ed. to SQL Server 2014 Std. Ed. Our server works with Merge and Transactional publications. Our current problem happens when trying to generate the first snapshot using the snapshot age
-
Why can't I find the "MainMenu.nib" file on my Macbook air?
I'm trying to remove private browsing from my computer and I need to find the "MainMenu.nib" file... when I go to that directory it isn't there. Help please.