Is it possible to load master data without making object as infoprovider

Hi
Is it possible to load master data or text data without making the infoobject as a data provider in BI7.0.
If yes please tell me the process.
Regards
Tulasi

Hi
YEs you ca do..
1) RIght click on master data in infosources tab and then say DTP -> give Datasource name -> transformations would genetared automatically.
Also this has been discsussed in many forums..search on SDN or let me knw if you are still facing issues.
thanks for points assigned

Similar Messages

Loading Master data into BPS through layouts

Hi SAP Gurus,
Is it possible to load the master data into BI-BPS through layouts(in BI 7.0
Thanks in advance.
Regards
Pradeep

Hi Pradeep,
if its combination of charactertics & keyfigures, then you need to load master data in Info objects(Characterstics) and for key figures you can load directly in the layout, once you save it , these values get saved back in Cube.
Hope this helps
Regards
Imran

Procedure to load master data in bw and bi

Hi All,
How load master data and use master data as a reference while loading transaction data

Hello,
Loading Master Data without using the PSA in SAP BI 7.0 :
https://community.altiusconsulting.com/blogs/glenchambers/archive/2008/03/10/loading-master-data-without-using-the-psa-in-sap-bi-7-0.aspx
Data Upload from Flat File to Business Intelligence 7.0 System:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60debae1-84dd-2b10-e7bf-bdedf1eabdf9
To load data from r3 data source , activate it at R3 side.
-- then replicate it in BI.
-- then you will get that data source in BI. Right click it & from pop up menu select appropriate options to create info package, transformation & DTP one by one. (activate each after creation)
-- execute info package. It will fetch data unto PSA.
-- execute DTP. It will load data to target according to mapping done in transformation.
Hope it helps.

Loading Master Data into ODS

Hi,
Can anyone tell me how to load the master data into the ODS?
Thanks
Yadav
Edited by: yadav on Apr 12, 2008 8:04 PM

Dear Yadav,,
U can load the master data to ur ODS..
The Process is same as loading Transaction Data into ODS but..
1. U need to do flexible Update instead of Direct Update...
2. Maintain all the Attributes in ur DATA part...
3. The record on which Updation depends should reside in the KEY FIELD section.
But there is difference in loading master data to info object and ODS..
If loaded in Info Objects..REusability is there.
But in ODS no reusability...
Hope this helps u...
Assign points if helpful...
Best Regards,
VVenkat..

Process chain for loading master data attributes

Dear Experts,
Can any one explain the steps needed to load master data into info object through process chain.
Thanks in advance
Santhosh
Please search the forum
Edited by: Pravender on Jun 8, 2010 3:06 PM

in bi7 this would be:
start
infopackage
dtp
attribute change run
M.

What if i load transaction data without loading master data

Hello experts,
What are the consequences if i load transaction data without loading master data?Are there any other factors except the load performance because of SID generations etc and inconsistencies.
<b>What kind of potential inconsistencies will occur?</b>
Problem here is:
when the transaction load starts a new master data such as employee(x) would be have been created in R/3 which does not exist in BW and hence transaction load fails.
Thanks and Regards
Uma Srinivasa rao

Hi Rao,
In case you load the master data after loading the transcation data and if there is any look up at the master data in teh update rules, then you can delete and reconstruct the requests in the ODS/Cube so that the latest master data is pulled in in the data target.
Make sure you do the Apply hier/attr change before doing the delete and reconstruct.
Bye
Dinesh

How to load master data from 2 source system without using 0logsys as compo

Hi Gurus,
I am working on a project which has 2 source systems.
Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
So, please help me out providing logic.
thanks in advance
Peter.

Hi Peter,
Can you brief me how did you resolved your issue?
Regards
Utpal

Can I reuse objects without Master data and load master data into it?

Hai,
I have a standard object that doesnot have Master data. Its already used somewhere else. It matches the name I want but I need to load some master data into it. Does resuing it in my catalogue and loading Master data into it hurt anything? Or should I create a new one?
Thank you.

Hi Visu,
The same InfoObject can be included in more than one InfoObject catalog without any issue. Also loading master data would not hurt an existing InfoProviders where it is being used.
Hope this helps...

Can we load Transaction data without loading Master data, explain w.r.tSID

Can we load Transaction data without loading Master data, if so can you explain me how and when Surrogate Ids/ Dimension Ids gets generated.

Hi,
We can load the transaction data without loading master data.
But for loading performance issues it is recommended not to load the transaction data first.
Every infoobject in the BW is identified by SID, that means which we are loading the transaction data, considering a scenario for an infocube, the system will identify the infoobject by existing sid against that infoobject in the bw and correspondingly create DIM id's.
Now consider the secnario where master data is not loaded and transaction data is being loaded.
Now the system should have sid to identify and infoobject and to create DIM id ( which is the combination of sid's of the characterisc in it)
And as the sid's are not yet created i mean as there is no referece for the master data, the system will first create the sid for that infoobject it means it will create a copy of the master data in that infoobject nd then create the dim ids based on it and then load the data.
Here the additional task of creating sids are also being done during loading the transaction data which hinders the loading performance
I hope this is clear5 now
Janardhan Kumar

Lock NOT set for: Loading master data attributes error

Hi experts,
We were encountering this error before when trying to load master data. When we checked the system we could not find any locks at the time, and activation or kicking off the attribute change run failed again. We finally solved the problem running FM RSDDS_AGGR_MOD_CLOSE which sets the close flag to 'X' in table RSDDAGGRMODSTATE. I have read that it is possible this lock error happens when two change runs happen at the same time.
My question are:
1. is it possible to find out what process exactly "caused" the lock? the table RSDDAGGRMODSTATE does not have a reference to any object or job. I am curious as we are trying to find ways to avoid this in the future...
2. in our case, when we could not find any locks, is running this fm the only work around? is this a best practice?
mark
Message was edited by:
Mark Siongco
Message was edited by:
Mark Siongco

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

DM Package Abort while loading master data - BPC 10 NW

Hello gurus,
I am trying to load master data from BW InfoObject to BPC. The package is running successfully if I just load the master data (without selecting the hierarchy node). However, when I select the hierarchy node, the package aborts without giving any details in the package log.
Please note that the hierarchy for the BW InfoObject is time-dependent.
Therefore, I was wondering if there are other requirements that should be in place (such as new SAP notes, etc.) or any other procedures that should be followed while loading the time-dependent master data from BW to BPC.
Thanks in advance for all your valuable guidance.
Best regards,
Vijay

Hi Vijay,
Please have a look at your ST22 t-code if it gives this error:"exception 'CX_SY_RANGE_OUTOF_BOUNDS' " apply the following note:
1957783 - An exception 'CX_SY_RANGE_OUT_OF_BOUNDS' occurs while
loading infoObject hierarchy on BW 740
Regards,
Noura

What happens internally while loading master data and transaction?

hello,
What happens internally and which tables are used while loading master data and transaction?
I have loaded the data in DSO, but i am not getting value of particular InfoObject after loading the data.
I have executed Attribute change run also.
Kindly explain ...
Thanks,
Sonu

Hi,
Master data,
Material Indipendent data can be sent without any dependency.
Material Dependent data sequence is as follow.
Plant,
MRP areas,
Supply area,
Material,
MRP area material,
planning material,
ATP check,
Purchase info recards,
schedule agg,
PPM or PDS (But before PPM or PDS work center should send to apo) If PDS is sending then BOM should send before PDS.
Transaction data.
As per the business requirement what is planning in apo.
Regards,
Kishore Reddy.

Need help in loading master data.

Hi everyone,
I am just a beginner in BI 7.0 . I know Bw 3.5 . I need help in loading master data(flat file) in a step by step manner.
Before posting this forum i searched and checked out other related forums too, as i am a beginner i am unable to follow them. Lots of the forums gave the help.sap.com link which i used and got a little help but not fully, so please don't send that link. I need a step by step guideline from somebody, which says everything from the beginning till monitoring say like
e.g.. 1) create a InfoObject by right clicking on InfoObject catalog.
something like that.
please help me get a clear and detail step by step procedure to load a master data (Flat File should be good) which may help me get a start will other things without much help.
Please help me learn.
Thanks.
Ranjani.

HI,
Thanks for your reply. This is what i did.
1) Created a Info Area.
2) Created Info object catalog & activated
3) created info object with nothing except some 4 attributes.
4) Created Application compound in Infosource tab.
5) Right clicked on Application compound and chose create Infosource in which chose a option with 3.x and chose the flexible update and gave the info object name.
6) In info provider tab , in the Info Area right clicked and chose the Insert char as data target option.
Now, i am stuck. I have no idea what to do next.
I know i have to create a transformation - There are two tabs in Transformation box, what should i do there.
Please help me from point 6 to cont., to load the data.
Thanks.

How to load master data and hierarchies from R/3 systems

HI all,
how to load master data and hierarchies from R/3 systems.
Please explain the steps.
Thanks,
cheta.

HI,
Its normally done following: Transferring the master datasources in RSA5 to RSA6 and then replicating the DS into BW and assignment of DS to Infosource and cretaion of Infopackage and load it into the master tables.
Generally, the control parameters for data transfer from a source system are maintained in extractor
customizing. In extractor customizing, you can access the corresponding source system in the source
system tree of the SAP BW Administrator Workbench by using the context menu.
To display or change the settings for data transfer at source system level, choose Business
Information Warehouse → General Settings → Maintaining Control Parameters for Data Transfer.
Note: The values for the data transfer are not hard limitations. It depends on the DataSource if these
limits can be followed.
In the SAP BW Scheduler, you can determine the control parameters for data transfer for individual
DataSources. You can determine the size of the data packet, the number of parallel processes for
data transfer and the frequency with which the status IDocs are sent, for every possible update
method for a DataSource.
To do so, choose Scheduler → DataSource → Default Settings for Data transfer.
In this way you can, for example, update transaction data in larger data packets in the PSA. If you
want to update master data in dialog mode, smaller packets ensure faster processing.
Hope this info helps.
Thanks,Ramoji.

To Load Master Data From Two Source System

Hi All,
I have a small question :
- Can we load master data from two different source system say from flat file and R3 or any two different or similar source system?
If answer is "Yes", then how?? If possible step by step.
Appreciate your valuable points.
Thanks,
Niraj Sharma

Hi,
Still i have problem.R3 Transformation and DTP is getting activated but when i am executing DTP for flat file,
I am getting below ERROR.
Object DTP DTP_d55.......could not found in version A.
I have checked the Master data locally for source sys in compounding Tab of the key field.
Please help..
Thanks,
Niraj

Is it possible to load master data without making object as infoprovider

Similar Messages

Maybe you are looking for