Is it possible to load most current cube data via variable 0S_RQMRC?

Hallo all,
in a DTP we try to load yellow request data from one cube to another. But we always get this error message:
System error in program CL_RSR and form GET_CHANMID-01-
Message no. BRAIN299
. What went wrong? Did you succeed in using olap variable 0S_RQMRC on characteristic 0REQUID as a DTP extraction filter?
Best regards
Martin

Hallo again,
now we try another approach to solve this problem... As Siegfried Szameitat points out in this thread: [Loading the data from COPA datasource to DSO(Different requirement)|Re: Loading the data from COPA datasource to DSO(Different requirement)|Answer from Siegfried Szameitat], it could be possible to extract also data of the yellow request, if we manage to extract the PSA data of the export datasource via the primary key fields of an PSA table: REQUEST, DATAPAKID and RECORD .
To do this, we tried to enhance the respective communication structure by the infoobjects 0REQUID, 0DATAPAKID and 0RECORD , but then we failed to extend the according transfer structure / transfer rules as well.
Any thoughts how to realize the extraction of the request ID, the record number and the data packet from a PSA table?
Best regards,
Martin

Similar Messages

Loading cube data

Hi Exprets
We have a cube in production from which we would need to use data for a new cube.
How do we load the entire cube data (including compressed data) to the new cube?
Thanks Much
Jason

Hi Jason,
1.) Create update rules for the new cube from the old cube.
1.2) In update rule give the old cube name and maintain mapping.
2.) In infosource -> Create InfoPackage under the Data marts for the infosource with name 8XXXXXX(8Source cube name)
3.) Perform full load.
Regards,
Mohan

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can also try downloading from another computer on a different network connection.

Can UC560 support the most current SCCP phone loads?

I have a UC560 that I recently upgraded to Software Pack 8.6(2).
The default phone loads from this software pack, are different than what's currently available to download from CCO, for certain phone models.
For example, the Cisco SPA508G firmware load that comes with SW Pack 8.6(2) is 7.5.2c. However, the most current firmware load available from CCO is 7.5.5 (released 6/14/2013).
Can I upload the latest phone load zip file from CCO, to the UC560? Or is UC560 only supported with the firmware loads that come with the software pack?

Hello,
You can run the new phone loads with the current software pack. Generally, I would only advise doing that if you are running into a specific issue/new feature that requires an upgrade first.
Thanks,
-john

Multiple loads to a cube ?

hello BW Experts,
Can we do multiple loads to a cube ?
Thanks,
BWer

If it is a FULL LOAD, definitely there would be duplication of data from ODS. I think you should consider dropping of requests in a FULL LOAD scenario or implementing DELTA.
In you update rules of the cube, do you have the option of Addition or No Update checked.
if it is No Update, the report might be having a parameter of considering only the most current request. This is possible by using variable of REQUEST ID like "Most Current Data" which is an SAP Exit. In this case, if the cube is compressed the entire data would report as duplicate in your case.
It is always desirable that the cube contains non duplicate data for efficient processing.
Hope it helps.
Regards

Lookup SCD Use Most Current not working

Hello Forum,
Can I get some advice on how to set up/configure the Type 2 History Lookup, the ETL guy and I thought by just selecting the "Use the most current record" option, OWB would do it's auto magic and use the dimension key assigned to the row/record that did not have an expiration date attribute populated..... instead the mapping is loading both the dimension key for the previous version of the record (the expried one) and the new version of the record. The data being added to my fact table now has two rows per daily insert instead of one.... not a good thing.
I'm thinking that we need to use the Effective Date somehow in the look-up so that the new items being added to my cube (fact table) are pointed to the new version of my record in our SCDII Dimension.....
what's the trick to setting up the Type2 History Lookup tab?
what does this radion button do then? "Use most current record"?
Thanks,
Ron

There are several outstanding issues (bugs) against the SCD Type2 dimension functionality in OWB.
It is possible your issue may be related one of these:
5372855 - Key Lookup on SCD2 - Parent Values are not Returned (Dimension is populated twice)
5845656 - Need Effective Dates For Initial Version and New Version of Records
6017185 - Dimension Operator Property 'Type2 Gap' Not Working
These bugs are scheduled to be fixed in the next major release of OWB as the SCD functionality is being improved/better documented.

Can I use Flash Player plugin version 11.2.202.228 with my Firefox ESR 10.0.7 instead of the most current Flash Player plugin?

I am trying the Tor web browser software pack and it comes with Firefox ESR 10.0.7.
Right now, I'm trying to install a Flash Player plugin because it doesn't have one in this Firefox ESR 10.0.7 already, or this browser just doesn't see the slightly older Flash Player 11.2.202.228 plugin that I already have already installed on this machine.
'''Is there a way to make this Firefox ESR 10.0.7 browser see the Flash Player plugin 11.2.202.228 that I already have installed on this machine without installing the newest, possibly problematic Flash Player plugin?'''
I already have the Flash Player 11.2.202.228 plugin installed on this machine, a PC with Windows 7 ULT, because the most current versions of the Flash Player plugin had some problems and they wouldn't allow Flash content to play at all, so I reverted back to a slightly older version of the Flash Player that was reliable, crash free, and most importantly, it works.
But when I try to play any Flash content in this Tor-Firefox ESR 10.0.7 browser it tells me I don't have a Flash Player on this machine, or installed as a browser plugin or add-on, and it wants me to install the most current Flash Player on this machine, which I DO NOT want to do for the reasons I stated above.
My other Firefox browser, along with Google's newest Chrome browser and a newer version of the Safari browser for Windows, plus an older Internet Explorer 8, all WORK JUST FINE with the Flash Player 11.2.202.228 that I have installed on this computer and Google Chrome and Safari didn't even require having newer Flash Player plugins installed at all... they just see the Flash Player 11.2.202.228 plugin that I already have on this machine and they play all Flash content perfectly.
So can I just make this Tor-Firefox ESR 10.0.7 browser see the existing Flash Player 11.2.202.228 plugin that I already have on this machine?... and if so, how do I do that?
Thanks for any help.
Also, I'm not able to find an actual community help forum for Tor, even via their "Torproject.org" website... is there one?
Thanks,
numetro

You should actually be using Flash 10.3 (11.2 is insecure).[[Flash 11.3 doesn't load video in Firefox#w_solution-2-downgrade-flash|Solution 2: Downgrade Flash]].
Also, is there a reason you are using Firefox ESR? It's mean for organizations, and doesn't include all the security and stability fixes that Firefox latest (15.0.1) has.

How to get the most current file based on date and time stamp using SSIS?

Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vv

hi simon
i excuted this script it is giving error..
   Microsoft SQL Server Integration Services Script Task
   Write scripts using Microsoft Visual C# 2008.
   The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
    [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
    public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
        #region VSTA generated code
        enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
            Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
        #endregion
       The execution engine calls this method when the task executes.
       To access the object model, use the Dts property. Connections, variables, events,
       and logging features are available as members of the Dts property as shown in the following examples.
       To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
       To post a log entry, call Dts.Log("This is my log text", 999, null);
       To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
       To use the connections collection use something like the following:
       ConnectionManager cm = Dts.Connections.Add("OLEDB");
       cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
       Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
       To open Help, press F1.
        public void Main()
            string file = Dts.Variables["User::FolderName"].Value.ToString();
            string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
            System.IO.FileInfo finf;
            DateTime currentDate = new DateTime();
            string lastFile = string.Empty;
            foreach (string f in files)
                finf = new System.IO.FileInfo(f);
                if (finf.CreationTime >= currentDate)
                    currentDate = finf.CreationTime;
                    lastFile = f;
            Dts.Variables["User::LastFile"].Value = lastFile;
            Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv

Error "cannot load request real time data targets" for new cube in BI 7.

Hi All,
WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
I am using BI 7.0 for first time and ahve the following issue:
I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets".
I checked cube type in setting in infcune is shows as Standard. When I doube clicked on error the following message showed up
You are trying to load data into a real-time InfoCube using a DTP.
This is only possible if the correct load settings have been defined for the InfoCube.
Procedure
In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
Thanks
KV

Hi Kverma,
Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
Real Time data Target can be loaded With Data; Planning not allowed &
Real Time data Target can be Planned; Data loading not allowed
You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
Regards,
Kams

Why in the world is the most current version of firefox AND flash having TONS of problems playing hulu videos? either chewing the crap out of my processor but playing ok, or chewing the crap out of my processor and not even playing video at all?

used to be firefox and hulu got along just fine, never had my computer get retarded slow or any of the other things its currently doing while there's a tab open with hulu... but here lately its been eating the snot outta my processor (between firefox.exe and plugin container the two are consistently using 100% of my processor... most of it being firefox.exe itself)
and tonight i cant watch hulu at all. the video shows a frame then its another 10-15 seconds before another single frame is showed.
my firefox is the most current version.
my adobe flash player plugin is the most current version.
there's no reason this should be happening but it is happening and its friggin annoying
============================
this happens anytime i'm in the part of hulu that has the player for showing whatever episode i'm attempting to watch. when i attempt to watch hulu i have no other tabs open and no other excess programs running on my computer, and firefox+plugincontainer run my CPU to 100% just between those two processes. i can browse around the internet just fine (like checking my email, or even getting to my queue list on hulu, which i have my homepage set as.. the queue list loads fine but the player part of hulu is when things go to crap)
and i just tried the exact same episode of lie to me that i couldnt watch on firefox.... tried watching it on internet explorer and its playing perfextly fine EVEN WHILE FIREFOX IS OPEN.
firefox is my preferred browser and i hope this junk can be fixed somehow.

Hi John, Sorry you have such problems, but you are in the wrong place for such a discussion.
General Discussions 
If you wish to leave a short comment on Firefox please use
* https://input.mozilla.org/en-US/feedback
If you need more help from Adobe or wish to comment on Flash please consider using their site
* http://forums.adobe.com/community/flashplayer
* http://www.adobe.com/uk/company/contact.html
This forum is not the place for discussing other software or the internet in general. Note even Firefox development and enhancements is considered off topic on this forum. All we do is try to help fellow users with specific Firefox problems.
Your own Firefox Flash Problem ? 
You need to remember that AdobeFlash is proprietary software licensed by a commercial Company. Some of that software may be free to use.
Flash should work well with Google Chrome as it is tightly integrated with that browser.
This forum may be able to help you with Flash Player problems when using Firefox, but any solution will require your assistance and help also.
If you have a problem with Flash Player use on Firefox start by looking at these articles
*[[Flash Plugin - Keep it up to date and troubleshoot problems]]
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround
If you are looking for help with Flash use on Firefox from this forum please say so and I will leave this question thread open, otherwise I will lock the thread as off topic for this forum.

Is it possible to load a request already updated in the data target ?

Hi Experts,
Question: load a request which is already updated in data targets and data mart status is set
Data flow:
source system -
> ODS1 -
> Infocube1
Now, requests are first loaded into ODS1. Then these request are loaded into Infocube1.
Now, i deleted the request in the Infocube1.
Is it possible to reload the request from ODS1 to Infocube1 ?
Please suggest how.
Regards,
Suraj S Nair

Hi Masthan Kaniganti ,
It is possible to load the data but not same request.
The reason why we can not load the request is in ODS level delta resords are updated ,hence with the selection condition we have to load the present and previous data.
and one more thing...
If you are deleted request in Cube level means, we can reconstuct the same request via reconstruction tab..
Hope this helps you...let me know if you any further ifo on this..
Best Regards,
maruthi

Is it possible to load an IPAD from two different ITune accounts? When I try it says it'll delete all the other account first.

Is it possible to load an IPAD from two different ITune accounts? When I try it says it'll delete all the other account first.

This is correct.
Ipad wilol sync itunes content and pics with one and only one computer at a time. Syncing to another will erase the current content.

[SOLVED] Possible to load GDM with startx?

I currently boot into the command line and then
startx
to get into GNOME. Is it possible to load GDM in .xinitrc or by any other means when I load my desktop environment? The reason I ask is because I can't get a lock screen to work unless I enable gdm.service at boot, which I don't want. Thanks.
Last edited by barretme (2013-05-09 02:23:48)

barretme wrote:The reason I ask is because I can't get a lock screen to work unless I enable gdm.service at boot, which I don't want. Thanks.
Actually, if what you want is the ability to lock the screen you don't have to enable gdm.
Just add "gnome-screensaver &" to your .xinitrc (before "exec gnome-session").
The lock screen this way is rather shabby, but better than nothing.

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

In version 8 the "stop loading the current page" icon is missing. How do I get it back?

I just installed version 8, and even though the features page says that the "stop loading the current page" will be a part of the default navigation toolbar, that icon is not on the toolbar. How do I get it to be there

In Firefox 4 and newer versions, the Go, Stop and Reload buttons are combined in one button at the right end of the URL or Address bar. The button changes depending on the activity:
*green Go arrow when typing in the address bar
*red Stop ("X") button while page is loading
*gray Reload (circular arrow) when page is finished loading.
See image at the bottom of this reply
Separate buttons are possible:
#Open Customize Toolbar window by clicking Firefox button > Option > Toolbar Layout '''''OR''''' clicking View > Toolbars > Customize if using the Menu Bar '''''OR''''' right-click in an empty space on a toolbar and choose Customize
#While the Customize window is open, Stop and Reload buttons will show separated between the address bar and the search bar
#While the Customize window is open, drag the buttons anywhere on the Navigation toolbar
#*order Reload-Stop will combine into one button
#**leaving in this order between URL/Location/Address bar and Search bar will cause it to re-combine with the "Go" button at the right end of the URL/Location/Address bar
#**leaving in this order elsewhere, the Reload and Stop buttons will combine into one button
#*order Stop-Reload will remain separate buttons
#*or drag a "Separator" from the Customize window between Reload-Stop and they will remain separate
#click Done at bottom right of Customize window to finish
See: https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Is it possible to load most current cube data via variable 0S_RQMRC?

Similar Messages

Maybe you are looking for