Is it possible to locally save a webpage and access it via the BB8330?

I have a couple of frequently used website FAQs that I saved locally on an old Palm PDA (the sites are book related and don't change much).  This way I could have the data, but not need an internet connection (and the data would load faster as well).  I would like to use the "pages" on my 8330 (Verizon), however I can't get the browser to accept that the "site" is "local" and not net based.  Is it possible to do this with the 8330?
I have copied the files/folders to my media card.  I tried to enter a path to the media card into the browser, but it says the format is invalid.  Does anyone have any ideas if what I would like to do is possibe or not?
(no real biggie if not as I can always use the net, but, as I said, the pages would load faster if they are local.)
Thanks

I simply store *.HTM files on my memory card.
then used the Memory explorer to browse the memory card, and click on the HTM file.
it works fine.
you can also look the "save page" option when you are viewing a page.
the page gets added to your messages list like a regular email.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

  • Is it possible to output to div monitor and s-video at the same time?

    I'm editing video and want to see the broadcast results on the fly (ie monitor and tv side by side, same image onscreen). Is it possible to output to div monitor and s-video at the same time? Maybe thru a splitter cable. I'm concerned about resolution issues.

    This is not possible with a mini.

  • Can't get MAC to shut down and start up via the schedule button in system preferences energy saver. Is there another way?

    Can't get MAC to shut down and start up via the schedule button in system preferences energy saver. Is there another way?

    Try this to start:
    Repair the Hard Drive and Permissions
    Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • If i have to get a new iphone but i want to save my pictures and video, what is the beve way without uploading them all to my computer

    if i have to get a new iphone but i want to save my pictures and video, what is the beve way without uploading them all to my computer

    Set up DROPBOX account on computer and upload pictures to computer.

  • Possible Problem with Save for Web and Devices?

    II've come here to the forum for some insight on why a gif file created by save for web and devices command is not showing up as an image in an uploading dialog box for my website.  I'm buildiing my website with word press and a custom freelancer theme.  I've created a customized header with Illustrator and have been saving the file with the save for web and devices command.  Once I have my gif file, I go to my theme uploader and try to upload the gif image and place it on my homepage.  I've not had any problems with doing this until yesterday, when I tried to upload an updated file.  What usually happens is that the thumbnail image shows up in the dialog box, I select my options, and click insert.  But what's started happening yesterday is that the thumbnail does not show up, unless I click on edit image.  This makes no difference, as when I click insert and go to my homepage and refresh it, the header doesn't show up.  I've tried working with the developer of the theme to resolve this problem and so far we've not found a solution.  I've tried to upload the header with different file types: jpg, png, tiff, but they don't work.  I thought I'd come here to see if anyone might have some suggestions.  The problem may not be with Illustrator's save for web and devices, but I thought I'd give this forum a shot.  Thanks for any and all respones. :[

    CT,
    If you can see and open the GIF/whatever (with any viewing application), the Illustrator Save for Web&Devices works. If not, you may ask about it in the Illustrator forum:
    http://forums.adobe.com/community/illustrator/illustrator_general?view=discussions
    If the image is there, to have the issue solved quickly, I believe you should ask in a forum covering the web building application.

  • Is it possible to run LabVIEW 7.1 and 8.5 under the same Windows installation?

    We have an older version of LabVIEW (7.1) which includes functionality for Event Notifications and the base version of LV8.3, which does not seem to contain this functionality. 
    Is it possible to run both of these from the same Windows Installation?  If not I plan to create a new partition and a new Windows installation just to accomodate the two of them.

    Something else to consider is windows compatibility. If you are running LabVIEW on Vista, I would highly discourage installation of Lv 7.1 and 8.5 on the same machine (even if they were different partitions), since there are some significant issues in terms harware compatibility.I am running windows 7.1 and 8.2.1 on a test station with no problems, but the OS is Win XP. My biggest gripe about the dual software system is when a v 7.1 files is opened up by 8.2.1. There is not a system to prevent it from happening, and once we accidentally save a 7.1 app in 8.2,1, going back to 7.1 is a big headache.  

  • TWO CRITICAL BUGS: 1) File, "Save Page As" and 2) right-click the picture and select "Save Image As", both do not work at all in Firefox 27, 28, and 29!

    Note: capitals are used only to highlight important words.
    PLEASE, TAKE THESE COMMENTS ON TWO CRITICAL BUGS VERY SERIOUSLY BECAUSE THE BUGS DESCRIBED BELOW ARE SO CRITICAL THAT I CANNOT USE THE LATEST VERSION OF FIREFOX UNLESS THEY DO NOT APPEAR IN THE LATEST VERSION AND THEREFORE I AM FORCED TO REVERT BACK TO FIREFOX 26.
    I have Windows 7 64-bit and Firefox 26. I could not install Firefox 27, 28, and 29 due to the persistent presence of the two critical bugs described below. I have 8 GB of RAM and an Intel quad-core processor and a lot of hard disk space available.
    I installed Firefox 27 and then Firefox 28 a while back and these two bugs described below were still present and now I have just checked again with Firefox 29 by installing it and yet again, these two bugs described below are present!! UNBELIEVABLE THAT THESE TWO CRITICAL BUGS ARE STILL PRESENT IN FIREFOX 29 WHEN I CLEARLY INFORMED YOU ABOUT THEM IN THE HELP, SUBMIT LINK OF FIREFOX!!
    I am forced to revert to Firefox 26!
    First, I use Windows 7 64-bit and I always use Firefox with at least 120 tabs opened. BUT I have 8 GB of RAM, an Intel core i7 quad-core processor and more than 1 TB of hard disk space. Consequently, I do not understand why I would have these two critical bugs.
    With Firefox 26, I also have at least 120 tabs opened when I start Firefox and I do not have the two critical bugs described below, therefore I do not believe that the number of tabs is the reason of the two critical bugs that are present in Firefox 27, 28, and 29.
    ---FIRST CRITICAL BUG:
    When I open ANY web page and do File, "Save Page As", the window that is supposed to open to locate the folder where I want to save this web page does NOT open at all, even if I wait a long time to see if it opens.
    Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
    ---SECOND CRITICAL BUG:
    When I use Google Images, for instance entering model in the search field of Google Images and then pressing enter.
    Then I select any picture, open to a new tab this selected picture, then open a new tab by selecting the option View for this picture. Then right-click the picture and select "Save Image As".
    Again, the window that is supposed to open to locate the folder where I want to save this picture does NOT open at all, even if I wait a long time to see if it opens.
    Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
    ---THESE TWO CRITICAL BUGS DO NOT APPEAR WHEN I USE INTERNET EXPLORER 11.
    I have no idea if you will be able to reproduce these two critical BUGS but I can assure you that they are not present when I use Firefox 26 and they are present when I use Firefox 27, 28, and 29. More, be aware that I have at least 100 tabs opened but I also have this same number of tabs opened in Firefox 26 and yet I do not experience these two critical bugs when I have Firefox 26!
    Once again, these two bugs touch at two vital, critical very basic functions of Firefox and therefore I will NOT be able to use any version above 26 if these two bugs are still present, as they are present in Firefox 27, 28, and now 29!!!
    Please, make it a priority to solve these two critical bugs. Thanks.
    I did read a post related to the same issues “Firefox stops responding when trying to "save page" or "save image" | Firefox Support Forum | Mozilla Support” at https://support.mozilla.org/en-US/questions/991630?esab=a&as=aaq
    I am still reading it again to try to figure out exactly what the person did to make his problems be solved, as the post is not clear at all on what solved the problems!
    In any case, all the suggestions proposed in this post do not work and I surely cannot do a system restore when it is obvious that the two bugs do not appear in Internet Explorer.

    First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
    Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
    As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
    Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
    So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
    Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
    If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
    I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.

  • Cannot directly open the browser from the icon. "problem loading webpage" and "timed out" are the messages. Access was accomplished by using yahoo messenger and opening my email. if I attempt to open a new page, I recieve the aforementioned warnings.

    no link to open access to the internet. I used Yahoo Messenger, clicked on the 'mail icon' and since Firefox is my default it opened and I was able to continue from there. If I try to click File, open New Page, I get the "problem loading webpage" and "connection timed out" messages

    changed my homepage to Yahoo. Now Firrefox works but still cannot access ANYTHING 'Google"!

  • Is it possible to have a Lion OS and snow Leopard using the bootcamp?

    I bought a macbook pro 13" 2011. I have other programs that will run only in Snow Leopard OS just like Logic Pro 8. Is it possible to install snow leopard aside from my current Lion OS? How to install? Is it possible to use both OS in my mac? I need your help. Thanks!

    OOPS!  I just noticed you actually have Lion, and want to go back to Snow Leopard.  That may or may not work.  The first test would be to see if you can boot your new MacBook 13" from a Snow Leopard installation DVD, or from another Mac in Firewire Target mode, or a bootable external Snow Leopard disk (SuperDuper or Carbon Copy Cloner created).
    If that works, then Yes, but before trying anything make sure you have full backups (SuperDuper or Carbon Copy Cloner, or even TimeMachine).  2 copies would be even better.
    Bootcamp is not needed.  Bootcamp is an aid to installing and running the Windows OS
    You can install Lion on an exteernal disk, and boot from that by holding down the Option key during boot.
    You can repartition your internal disk so you have 2 partitions.  You restore your Snow Leopard backup to one partition, and install Lion on the other.  You can choose to boot into either partition by holding own the Option key during boot.  You could also use System Preferences -> Startup Disk to switch between Snow Leopard and Lion.
    You can use virtual machine software (VMware Fusion, Parallels, VirtualBox) on Snow Leopard (does not work the other way), then install Lion in a virtual machine (your MacBook should have a minimum of 4GB if you are going to try this).  This would allow you to run Snow Leopard and Lion at the same time.
    You could buy one of those kits that replaces your DVD drive with a Solid State Disk (SSD), and instlal Lion on the SSD, and again boot holding the Option key or use Startup Disk system pref to switch between the OS versions.
    Message was edited by: BobHarris

  • How to run save for web and contact sheets at the same time

    Hi
    my question is simple and a means to save time-
    Lets suppose I have 3 camera images and I want to run either save for web applications on 2 cameras at the same time, how/can i do that to save time or lets say contact sheet action on 1 and save for web on the other to save time or photoshop files and this runs in the background?
    would really help save me time.

    Even if you could run the three process in the background at the same time I do not think the duration of the total execution time would be any shorter. You would still be executing the same number of processor instruction reading and writing the same number of files. If the whole processor was constrained by the processing power running them cuncurrenly may increase the processing time because of contention for the processor. If the processes are IO bound that will not change a overlaping the processes may cause more hard disk seaking because of contention of the hard disk arm.

  • I want to use Firefox for a specific webpage and my Safari for the rest of my browsing. I have an Apple macbook and am very new to Firefox

    I want to use Firefox for a specific webpage and Safari for the rest of my browsing. I have an Apple macbook and am very new to Firefox

    I thought my response was clear, but to reiterate:
    1.  10.5.1.42
    2.  None, nada, zero, zilch.  I have no iPhone account with any carrier.  There is a deactivated ATT sim card in the3 phone.  Someone gave it to me.  I only want to use it as an iPod Touch.
    3.  PC with Windows 7 (I can offer more detailed info, but I am not sure how that would help.
    I had already read that link.  Reset did not resolve (both hard and soft)

  • Screen Saver when calling and need to use the Keypad, the screen saver doesn't detect the phone has left the ear and blanks out the screen.  Even ending a call is difficult as the screen blanks out within seconds

    I have to use the Keypad a lot when making calls.  Make the call, the Robot then asks to enter a number for a service, pull the phone down from the ear, the screen may light up for a second, but then the screen saver cuts in, blanking the screen out.  Sometimes you hit the Home Key to awaken the sccreen, enter your number and then back to the ear to hear the next set of instructions.  Back and forth just trying to enter the options is a pain.  Sometimes even trying to end the call, the screen blanks out and you fight to try and end a call.
    If I use the Speaker function the keypad works; the speakler phone is not alway appropriate. 
    It appears that the phone gyro, doesn't detect the phone has moved from the ear to the viewing angle.  This wasn't an issue until recently and I can't remeber if it's the iPhone 5 or one of the updates.  It definitly wasn't there earlier on, as I threw away an Windows 6.5 phone for the same problem. 
    I'm not sure if it's a hardware or software (design) issue.

    It is not the gyro. This has everything to do with the iPhone's prioximity sensor.
    Are you using a case that may be blocking or partially blocking the proximity sensor? If you are using the case, remove the case prior to the next call to see if the same occurs without the case.

  • When i 'save for web and devices' in illustrator, the resulting jpg is cropped

    Has anyone run into this before?  I'm trying to 'save for web and devices" in illustrator, but the resulting jpg doesn't show the whole artboard.  its cropped off some of the top and bottom.  my file is a simple box with text inside.  no other graphical elements of any kind. 

    Thanks Monika.  I have a 3.25x3" artboard that has just text on it.  I selected "save for web and devices" and the preview window shows the artboard smaller than actual size so some of the text is cut off or pushed to the edge.  I saved it just to see what would happen and the resulting file is just as was with the preview.  I also tried doing a 'save as' for the jpg and same result.  Oddly, I outlined the artboard with a box and the jpg came out fine.  Any ideas?

  • Firefox won't save DMG files and won't mount the disk image. Why?

    When I try to install a download I am asked to either save the DMG file or Open using .... I select save, but the disk image never appears on my desktop and nothing shows in the Tools-Downloads window.

    See if this helps you: <br />
    http://support.mozilla.com/en-US/kb/Managing+file+types

  • Is it possible  to ask user a text, and create watermark with the answer?

    I am using the action wizard combined with preflight profiles to make some arrangements in the pdf I get from my customers.
    I usually create a watermark and introduce it without problems, but I would like to go further, introducing a code number that changes for every item as a watermark.
    It would be interesting that Acrobat asked the user that code number, and acrobat put that information in the bottom-center or the existing page...
    Is that possible with the action wizard, or should I look for information in the javascript forum?
    Thanks and Kind Regards.
    Joan

    I simply store *.HTM files on my memory card.
    then used the Memory explorer to browse the memory card, and click on the HTM file.
    it works fine.
    you can also look the "save page" option when you are viewing a page.
    the page gets added to your messages list like a regular email.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Maybe you are looking for