Is it possible to lock a text message so it doesn't get deleted?
Is it possible to lock a text message so it doesn't accidentally get deleted?
No, sorry, but try this:
https://discussions.apple.com/message/21625263#21625263
Similar Messages
-
Is it possible to lock individual text messages to prevent deletion?
Is there a way to lock an indiviual text message (iMessage) and prevent it from being deleted when the rest of the thread is deleted? Sometimes I want to keep certain messages because they are just too funny to get rid of!
"Is there a way to lock an indiviual text message (iMessage) and prevent it from being deleted when the rest of the thread is deleted?"
No -
is it possible to have my text messages sent to my email as well? or is there a way to view them other than on the phone?
Sure. Go to the conversation that contains the message(s) you wish to forward. Tap the Edit button in the upper right corner. Select the message(s) you wish to forward using the radio buttons. Tap "Forward" at the bottom right of the screen.
-
Is it possible to send a text message using the UDP protocol?
Support doc
http://www.adobe.com/support/director/multiuser/using_udp/using_udp02.html
says to use the following format with connectToNetServer:
errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
"chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
#password:
"MySecret", #movieID: "Tech Chat"], #mode: #smus,
#localUDPPort: 1627,
#localAddress: "123.45.67.89", #remoteTCPPort: 1626])
But if I change the mode to #text, it still sends out
messages as smus.
In fact, if I leave out the UDP parameters altogether but
still use the
list parameters for connectToNetServer, it still always sends
as smus.
Sends as smus:
errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
"chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
#password:
"MySecret", #movieID: "Tech Chat"], #mode: #text,
#localUDPPort: 1627,
#localAddress: "123.45.67.89", #remoteTCPPort: 1626])
Sends as smus:
errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
"chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
#password:
"MySecret", #movieID: "Tech Chat"], #mode: #text])
Only the string parameter method can be made to send text
messages.
Sends as text:
errCode = gMultiuserInstance.connectToNetServer("Bob",
"MySecret",
"chatServer.myCompany.com", 1626, "Tech Chat", 1)
Am I missing something? Is this a known issue? Anyone have a
work around?
-JeremyDrat!
Thanks for the answer though.
alchemist wrote:
> The multiuserXtra supports either tcp text or tcp smus
connections.
> The ability to send udp messages was an expansion to the
original mus
> protocol/xtra and is valid only for muXtra instances
already connected in
> smus mode.
> So, if you are asking if you can create a udp instance
and use it at will
> (exchange udp messages with some remote udp socket),
then the answer is no.
>
>
> "Jeremy Aker" <[email protected]> wrote in message
> news:[email protected]...
>> I'm really sorry that I wasn't clear enough. I'll
repeat the questions
>> more concisely.
>> Is it possible to send a text message using the UDP
protocol? If so, how?
>> Is the bug I described in my original message (see
below) really a bug or
>> am I doing something wrong?
>> If it's a bug, does anyone have a work around?
>>
>> alchemist wrote:
>>> And the question is?
>>>
>>> "Jeremy Aker" <[email protected]> wrote in
message
>>> news:[email protected]...
>>>> Support doc
>>>>
http://www.adobe.com/support/director/multiuser/using_udp/using_udp02.html
>>>> says to use the following format with
connectToNetServer:
>>>> errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
>>>> "chatServer.myCompany.com", #logonInfo:
[#userID: "Bob", #password:
>>>> "MySecret", #movieID: "Tech Chat"], #mode:
#smus, #localUDPPort: 1627,
>>>> #localAddress: "123.45.67.89",
#remoteTCPPort: 1626])
>>>>
>>>> But if I change the mode to #text, it still
sends out messages as smus.
>>>> In fact, if I leave out the UDP parameters
altogether but still use the
>>>> list parameters for connectToNetServer, it
still always sends as smus.
>>>>
>>>> Sends as smus:
>>>> errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
>>>> "chatServer.myCompany.com", #logonInfo:
[#userID: "Bob", #password:
>>>> "MySecret", #movieID: "Tech Chat"], #mode:
#text, #localUDPPort: 1627,
>>>> #localAddress: "123.45.67.89",
#remoteTCPPort: 1626])
>>>>
>>>> Sends as smus:
>>>> errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
>>>> "chatServer.myCompany.com", #logonInfo:
[#userID: "Bob", #password:
>>>> "MySecret", #movieID: "Tech Chat"], #mode:
#text])
>>>>
>>>> Only the string parameter method can be made
to send text messages.
>>>> Sends as text:
>>>> errCode =
gMultiuserInstance.connectToNetServer("Bob", "MySecret",
>>>> "chatServer.myCompany.com", 1626, "Tech
Chat", 1)
>>>>
>>>> Am I missing something? Is this a known
issue? Anyone have a work
>>>> around?
>>>>
>>>> -Jeremy
> -
Is there any way to LOCK/save text messages?
Is there any way to LOCK/save text messages?
Not really, except with third-party apps:
https://discussions.apple.com/message/15205763#15205763
https://discussions.apple.com/message/5537905#5537905 -
How to lock my text message on iphone 6 plus
Hi
I already update ios 8.0.2, I would like to know how can I lock my text message if someone can use my phone but I don't want them can read my text message app or email app.
How can I do and lock it, I try Guided Accesses but it seems not good for use, can you let me know does any good way to lock it.
Thanks
SDfannyThere is no way to lock access to individual apps on the phone.
-
I restored my iphone from a backup that is about one month old (because all my contacts had disappeared). Is it possible to retrieve the text messages that occurred after that back up. They disappeared after the restore.
I don't know if I'm on the same page as you.
But if you backed up the phone with those contacts pictures notes etc, you should get them back.
After restoring your phone, use the back up that done when you had those contacts messages etc?? -
I need help!!! Did my iOS 6 update today, thought it was fine!! Then my friend text me and instead of saying Siobhain it says voicemail text message!! I've tried deleting her and adding her again, turning phone off etc etc!! Please help!!
I know of no way to remove encryption on iTunes backups if you've forgotton the password. If you've used the 4 digit PIN code to lock your iPhone in the past that can sometimes default as your "password" for this encryption in iTunes. Try that PIN or any PIN you've used in the past. If you don't use a lock maybe you played around with that feature once when you first got your phone....try "1,2,3,4" or anything you could have possibly tried.
As far as accessing older unencrypted backups you can try this software. I do not have any experience using it but it seems like it's what you need and is probably the easiest route for both voicemail and texts:
http://deciphertools.com/products.html
If you want to try to find voicemails using Terminal, I found this link as well:
http://mikereys.wordpress.com/2011/10/18/iphone-backup-restoring-visual-voice-ma il/
I know with AT&T, voicemails are only stored on their servers for 30 days so any voicemail older than that you would not have been able to access again.
Best of luck. -
I have 2 phones attached to my apple ID account and when I text message that person, I am getting a duplicate message sent back to me. How do I stop this from happening?
Make 3 different iCloud accounts and use ONLY for iMessage. That will permanently fix your issue.
-
I lost some text messages and I want to get them back. I tried an iTunes backup, but I ended up losing even more messages? Can they be recovered?
Go to settings>messages>send and receive at>you can be reached by iMessages at> Uncheck your phone number and you can select your Apple ID emal address if you want to use that for messages.
-
There are text messages that I'm having trouble deleting. With some of my text messages, I can swipe to the left and delete ... or press and hold, get more and delete to trash can icon. But there are some where neither will work. Can't delete. Help!
But once again, I do not want to lose my other texts, app progress, and photos. I could sync the photos but i would still lose the app progress and texts. I would only restore if it was the only option left, but the other space, as already stated, isnt the main concern. The main concern is those 'deleted' texts. If they go, then a good size chunk of the other space goes. I know you CAN delete texts for good. It worked fine before. All i want to know is why its not working for me now, and how to fix it.
I also know that when you delete texts on your iphone, they get marked for deletion, however they stay on your device (thats why they show up when you search for them.) then when you sync your device with itunes, the texts marked for deletion should disappear. When i synced they didnt disappear. Thats what i need an explanation/solution for. Why the texts marked for deletion didnt get fully deleted after the sync. -
If I delete any message from email account it gets deleted from thunder bird as well so how can i keep back up
either use the pop protocol to get your mails, or move mail into a "local Folder" from your mail account and it will delete on the server as well as from the account in Thunderbird.
-
Is it possible to see thé text message That m'y other iPhone have
I am wondering IF my ten years olddaughter have my iPhone with my apple id IF it si possible To go see the text message when she havé it
Unless you receive new Imessages and you have included your Apple ID in send and receive. Go to settings>messages ad under send and receive remove your Apple ID.
-
It was the strangest thing. You would think that once you delete a message off your phone it is gone.
But in the "search iPhone" feature several key numbers like an area code reveal phone numbers of people
who aren't in my contact list, specifically the first few words of text messages that I deleted long ago.
I would like to eliminate these once and for all.
Will "Erase Content and settings" do this for good? Once I restore the phone will they come back?
Thanks.
******note found another thread relating to this********no need to reply********
Message was edited by: stewart g.The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
Dearest Ones in the Apple Tech World,
I need to free up space in my storage, and I can do that if I can figure out how to delete my saved text messages. Anyone out there know how in the world I can accomplish this?
I have tried to delete them one by one, but it still says that I have 2.3 GB of saved messages!
I am not the saviest when it comes to operating this phone. Any help would be appreciated!
THANKS SO MUCH!There's no way to delete all message threads at one go. You can however do one contact thread at a time.
In Messages app where you see a list of messages from different contacts, tap Edit (top left), tap the red (on the left), then tap the red Delete button on the right.
Maybe you are looking for
-
Hello Experts, We are implementing IP for Cost Center Planning and we are using BPS for Data Retraction. Our requirement is to retract the data on monthly basis to R/3 system. We are facing a strange issue here. In parameter group setting we are usin
-
I just upgraded to Photoshop cs6 so that my new camera (Nikon D7100) would work in Camera Raw (I was told that the Camera Raw update 8.3, which is available for CS6, included this camera). However, it will not download from the "Update" option in
-
I know how to use stickies, but when i restart my computer i need to go to find/machelp/stickies/stickies and then click on the link to get them on my desktop. How do i get them to stay on my desktop after shutdown. Thanks.
-
How do I get my music back after syncing new phone?
-
Hi, I had downloaded Asia and Europe maps 2 days ago. It was working fine this morning but then all the maps data disappeared. I can only see the green background and the landmarks....... have anyone encountered this problem ? N95-2, RM-320, V31.0.01