Is it possible to lock panels, to prevent accidental rearrangements?

Hello,
I pretty much live in SQL Developer and my biggest pet peeve with it is that I'll often be trying to click on a tab and instead of the tab gaining focus, it will think I wanted to drag it and separate that tab into its own panel. This happens all the freaking time. It seems like the slightest bit of mouse movement around the time that you click on a tab will be interpreted as a drag. So my question is:
1. Is there a way to lock down the panels so that dragging is disabled?
2. Alternatively is there some setting to make the SQL Developer less likely to interpret a click as a drag?
Thanks!

Well that sucks. I've learned to appreciate how much you can get out of the remarkable flexibility of SQL Developer's UI by dragging things around, but it's a shame that this basic annoyance can't get addressed directly by the SQL Developer team.
Here is a feature request item for this @ the exchange. It's marked as rejected for the reasons you mentioned, but if enough people pile on, it might get a second look. http://htmldb.oracle.com/pls/otn/f?p=42626:39:7775627291146913::NO::P39_ID:8462
In any case, thanks for the answer.
Edited by: IvanG on Jul 19, 2010 4:52 PM
Edited by: IvanG on Jul 19, 2010 4:53 PM

Similar Messages

  • I had my iPhone stolen and I wonder if I would be possible to completely lock the device, preventing the thief turned the phone again?

    I had my iPhone stolen and I wonder if I would be possible to completely lock the device, preventing the thief turned the phone again?

    You can lock the device to prevent them from getting to your personal information if you set up mobileme, but unfortunately all the theif has to do is a forced restore and set up as new, get a new SIM and use it.

  • Possible to lock phone volume/ringtone?

    Hello, is it possible to lock the ringtone and volume settings on a specific line on the 79XX series phones? As an example, I would like to add a line used for emergencies only to specific phones but lock the ringtone and volume on it so individual user's local phone settings would not override it.
    Thanks,
    -J

    Hi Jeremiah,
    I'll just add this tech note to the tips from my friend Manish (+5)
    Q.    How do I prevent the user from changing the ring volume and network   configuration on IP phones?
    A. Users are unable to change the ring volume if you disable the Settings       Access parameter on the Phone configuration page. Complete these steps:
    From the Cisco CallManager Administration page, choose             Device > Phone, and click the phone for which you want to             prevent a ring volume change.
    Choose Disabled for the Settings Access parameter             under the Product Specific Configuration section.
    When Settings Access is enabled, you can change the phone network       configuration, ring type, and volume on the phone. When you disable Settings       Access, the Settings button is completely disabled and no options appear when       you press the button. Also, you cannot adjust the ringer volume or save any       volume settings. The option Restricted is available in Cisco CallManager       version 4.1(3) and later. When you change Settings Access to Restricted, you       can only access User Preferences and volume settings. By default, Settings       Access is enabled.
    From;
    http://www.cisco.com/en/US/products/hw/phones/ps379/products_qanda_item09186a00800a6763.shtml
    Cheers!
    Rob
    "Seek it out and ye shall find  " 
    - OneRepublic

  • Is it possible to lock the keyboard of a client from a server using java

    please explain wheterit is possible to lock the keyboard of a client from a server using java

    You want to process code on one machine, and thereby lock the keyboard on another machine? No, that's not possible. It is extremely far from possible.
    Of course, if the client is running software with security holes in it you might hack into it and crash the thing. This will lock up the keyboard pretty good. I hope that's not what you want ...
    Or are you talking about a setup where you already have code running on the client, and some sort of communication between client and server? In that case what you need to know is whether it is possible to lock the keyboard at all. Once you have figured that out, it is trivial to add the communication code to have the server software tell the client software to lock the keyboard.
    So what do you mean with "lock the keyboard"? It's pretty easy to remove/disable all keyboard related listeners in your own application. It's a lot harder (and AFAIK impossible with pure java) to disable alt-tabbing out of the application. And impossible, except from exploiting security holes, to lock the ctrl-alt-delete-combination on windows machine.

  • Lost Mode and Play Sound are "Pending."  However, iCloud indicates that it connected and backed up to iCloud at a date that is 1 week after it went missing.  How is this possible without locking (Lost Mode Pending an internet connection)

    Hi,
    My wife lost her iPhone two weeks ago while on vacation in London (cell service inoperative in foreign country).  Using Find My iPhone app on my device, I activated Lost Mode and Play Sound.  However, both are listed as "Pending," since it those actions require the phone to connect to the internet (wifi only due to no cellular data coverage.).
    We recently returned home and purchased a new iPhone.
    However, when looking to restore the apps/settings from her old phone using a previous iCloud backup, iCloud indicates that the old phone connected to iCloud and backed up the original phone at a date that is 1 week after it went missing.  How is this possible without locking (Lost Mode Pending an internet connection)?
    If the phone was activated and connected to the internet via a wifi signal, shouldn't it immedately lock, show up on the map, Play Sound, and send me an email that the phone has been found?
    I also read somewhere that if running iOS 7, the iCloud website interface enables you to track previous locations, for instance if the phone moves from wifi hotspot to hotspot.  Is that true?  If so, how do I do that?
    Thank you for your time, and have a great day!
    Sincerely,
    - Matt

    just giving this a wee bump as time is of the essence here and i need advice/ answers quick!
    apologies if i've broke any rules!
    alex

  • Is it possible to lock out  the Key Board commands in Keynote?

    Is it possible to lock out your key board actions  in Keynote? This happened all of a sudden. My keyboard has no effect on my trying to change text colors or enter characters. By using the mouse to add text the text box appears but I cannot change the character color.I can change it with the mouse and the new color is displayed but when I type nothing appears as the default color is white and the background is white. I did a copy and paste from a previous slide and I can enter the line to start editing but nothing appears. Nor can I delete anything with the Key board. This is only happening in Keynote. If I use the Key Board to send an email everything works fine. Can type and use the delete button so it seems that the Key Board is fine with other Apps, this is just happening in Keynote. It seems like the Key Board actions are not taking place, it is as if the Key Board is locked out of the Keynote functions.
    Thanks in advance for any help
    Rodger

    Try resetting Keynote as follows:
    remove Keynote version 6.5, you must use an application removal tool for this procedure to work:    Appcleaner is free, I use Appzapper
    empty the trash
    Shut Down the Mac (Apple menu > Shut Down)
    wait 10 seconds, then press the power button
    Immediately after you hear the startup tone, hold down the Shift key, release the Shift key when you see the grey Apple screen
    start up will take a few minutes longer than usual as the Mac is performing a repair routine
    restart the Mac normally, (don’t hold down any keys during startup)
    install Keynote from the Mac App Store

  • Error in BSP runtime repository: "Not possible to lock runtime repository"

    Hi,
    When I tried to change runtime repository of a component BT120H_CPL, in BSP component workbench, I am getting the following error: (The component is already enhanced one only).
    Not possible to lock runtime repository
    Message no. BSP_WD_TOOLS216
    Diagnosis
    You can only lock and edit runtime repositories that are saved statically in a BSP page. This means that the page may not contain dynamic elements, such as ABAP source code or page includes. Dynamic BSP pages must be loaded via HTTP and cannot be locked or edited.
    It is also not possible to lock or edit runtime repositories that are only referenced as a URL or that are in the MIME repository.
    System Response
    Lock not possible. You remain in display mode.
    Could you please help me out for the same.
    Thanks,
    Sandeep

    Hi Sandeep,
                    There is another way of commenting the code as below:
    <!--  commented code -->
    This wouldn't cause any scripting comment. Generally we use <% %> type of comments if we want to comment more than 1 line at a time. But for repository we have to use code as I mentioned above for each line seperately.
    I hope that resolves your query
    Thanks,
    Rohit

  • Is it possible to lock and unlock a transaction?

    Hi SDN,
    Is it possible to lock and unlock a standard transaction( for eg VA02 ) through my program?( i am creating a customized version of standard transaction ) I want to lock the transaction for my user-id and then i will update the values in that transaction and finally i will unlock it.
    I got the FM for locking at the database level.is there is any FM to lock and unlock the transaction?

    Hi,
    It may not be the best way, but maybe you could use the functionality behind transaction code SM01. Here you can lock/unlock the transaction code. If you look at the program, all it is really doing is updating table TSTC field CINFO. CINFO = 80 when unlocked, CINFO = A0 when locked. You could just update the field accordingly and then call this function module right after.
    * For locking
    CALL FUNCTION 'RSAU_WRITE_SM01_LOG'
      EXPORTING
        TCODE = TSTC-TCODE
        LOCK = 'X'.
    * For unlocking
    CALL FUNCTION 'RSAU_WRITE_SM01_LOG'
      EXPORTING
        TCODE = TSTC-TCODE
        UNLOCK = 'X'.
    Regards,
    Ferry Lianto

  • Is it possible to lock account Groups of customers

    Hi,
    ist it possible to lock account Groups of customers? I don't want to delete some groups, because
    there some customers with this groups i want to lock, but i will avoid that there are new customers with
    this groups.
    Regards, Dieter

    Hi,
    Yes Basis Consultant will ristrict the authorization of creating certain Customer Groups as satish said.
    So Provide the List of Customer grps to Basis Consultant and ask him to ristrict to all the users.
    Regards,
    Padma

  • Is it possible to lock tracks on Premiere Elements 11? Overwriting clips?

    Hi,
    From what I can see/have read it is not possible to lock tracks whilst editing on Premiere Elements 11 - is that right?
    I am a new user and have been finding that as I'm moving clips around the timeline it seems very unpredictable as to whether the clip slots into place without affecting the position of everything else or whether it creates a cut in the soundtrack leaving an empty space, or whether it just shifts things up.
    Essentially I want to know how to overwrite clips (ie. when I drag a clip in, everything else on the timeline stays in the same place)
    I'm assuming that this means that there is a method to do all of these things but I appear to have done them all by accident and can't work out the method!
    Any help much appreciated. Thanks!

    Holding down the Ctrl key (or the Cmd key on a Mac) as you add new clips to the timeline will keep everything on the timeline in place and override the ripple feature.

  • Is it possible to lock the Asset after capitalization - GR Posting done

    Hi,
    The Fund Reservation configuration containing with Fund, Fund Centre & Commitment Item is linked with Asset at the time of creation of PR.
    If we change the asset in PR, the new Commitment Item is showing after GR posting.
    At the same time old commitment item is showing through Invoice Posting.
    Is it possible GR reversal after capitalization of Asset ? 
    Invoice raised through FB60 not MIRO.  Hence, Invoice No. details are not shown in PO History.  Payment made and the capitalization impact shown in the Asset Master also.
    Please confirm the following:
    If the open GR (capitalized) in PO - Is it possible to lock the relevant Asset?
    If the open GR (capitalized) in PO - Is it possible to block the PO?
    Expecting few valuable guidelines from MM forum.
    Regards,
    GB

    Closed.   No solution.

  • Is it possible to lock a certain area from paging?

    In my folios I have an area on the very top where web content is embedded.
    In this web content there is also a progress knob that you can move from the left to the right and conversely.
    If you don't touch this knob exactly, the folio moves a bit to the left or right - and not the knob.
    Is it possible to lock this area, so that pagging to the next or prevous side is only possible below it?

    Or make sure your HTML handles touch gestures, even if it does nothing with them. If the HTML handles the gesture (not just the button, but also the backround of the page) then we won't get it and won't navigate pages.
    Neil

  • Is it possible to lock cells in a shared document?

    I would like to share a document and only allow certain cells to be available for changes in the data in those cells. Some cells will have formulas I don't want changed. Is it possible to lock a cell or range of cells so they can't be changed? Thanks for any help you can give.

    they added password protection for the whole document, but I don't know about individual cells. that would require sheet or table level password protection, which isn't available.
    Jason

  • Is it possible to lock the orientation of the lockscreen/desktop photo on the iPad 2?

    I changed both lock screen and wallpaper photo from the default. Both change orientation as if you are looking at the photo in a gallery. Is it possible to lock the orientation?

    - Note some of those can get them from the iPod as well as the iPod backup that iTunes makes
    How to perform iPad recovery for photos, videos
    Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official     
    http://www.amacsoft.com/ipod-data-recovery.html
    iPod recovery software to restore lost music files      
    - For the second questin it depends upo what ap y ae using. If you are using Pages thengot to icloud.com, log in and go to Pages Beta

  • Is it possible to lock a folder with a passcode?

    Hi,
    This is more of a request then needing help on it, but is it possible to lock folders with a passcode? this would be very useful for me because I am very irresponsible and can't stop myself from playing games, and adding a passcode would make me think twice about it.

    Only if the the specific app support that feature. Few do.

Maybe you are looking for