Is it possible to lose a portion of an application,my i photo starts to boot but never completesn
is it possible to lose a portion of an application,my i photo starts to boot but never completely opens??
Check the logs.
Similar Messages
-
TS1398 Is it possible to lose the wifi settings so that you can't connect?
Is it possible to lose the Wi-Fi settings so that you can't connect?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I dropped my iPhone 4 in water and now it won't turn on at all, will i lose all of my data, for example my photos and messages etc? and is there any way you can back the phone up without having it switched on?
If you had previously been backing up to iCloud (or a computer with iTunes), you would possibly have a backup. That said, if you can't turn the phone on, you cannot create a backup of the device now. Sorry.
-
My iPhone 4 has never backed up to anything, the account I started it with I never used so I was never able to verify it or anything. I now have a new icloud account and I want to backup my phone before I get a new one in a couple of days. If I delete the old account will I lose my photos or will they still be on my phone (remember they've never been backed up)? Thanks!
You cannot delete an Apple ID, you can just stop using it. If your photos are still on your phone now, then I suggest you do back them up. Transfer them from the phone into your iPhoto Library. iCloud only backs up your Camera Roll automatically. But the Camera Roll only contains new photos that were taken but not yet transferred using iTunes.
-
Dear support @Apple,
I have tried to log in App Store with my Apple ID 3 times but never possible.
I have tried to change password 2 times.
It was successful.But soon after change of my password, I could not log in App store.
It says always incorrect user name or password. But I input correct ! Because just I successfully changed my password through secret question.
Third time when I tried to change password, the page did not open!
So I checked my connection by netstat , and I trace the IP address ; 17.154.66.17 this is apple IP, but when I trace , it did not show the route. I will copy
Traceroute has started…
traceroute to 17.154.66.17 (17.154.66.17), 64 hops max, 72 byte packets
1 220.224.141.129 (220.224.141.129) 490.517 ms 64.527 ms 94.524 ms
2 115.255.239.97 (115.255.239.97) 65.157 ms 89.128 ms 89.806 ms
3 124.124.251.241 (124.124.251.241) 104.972 ms 79.051 ms 96.948 ms
4 * * *
5 62.216.147.137 (62.216.147.137) 102.266 ms 85.581 ms 88.352 ms
6 xe-0-0-0.0.pjr04.ldn001.flagtel.com (85.95.25.186) 221.939 ms 225.223 ms 236.605 ms
7 xe-11-0-0.edge5.london1.level3.net (212.187.138.53) 231.629 ms 232.045 ms 233.673 ms
8 ae-52-52.csw2.london1.level3.net (4.69.139.120) 373.798 ms 390.412 ms 383.277 ms
9 ae-57-222.ebr2.london1.level3.net (4.69.153.133) 382.653 ms 382.558 ms 376.740 ms
10 ae-43-43.ebr1.newyork1.level3.net (4.69.137.74) 405.088 ms 377.679 ms 386.527 ms
11 ae-91-91.csw4.newyork1.level3.net (4.69.134.78) 378.499 ms 389.733 ms 396.375 ms
12 ae-92-92.ebr2.newyork1.level3.net (4.69.148.45) 391.706 ms 389.605 ms
ae-82-82.ebr2.newyork1.level3.net (4.69.148.41) 381.615 ms
13 4.69.135.185 (4.69.135.185) 380.183 ms 414.398 ms 387.054 ms
14 ae-91-91.csw4.sanjose1.level3.net (4.69.153.14) 384.980 ms 381.375 ms 386.453 ms
15 ae-4-90.edge2.sanjose3.level3.net (4.69.152.209) 377.304 ms 365.457 ms 373.281 ms
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
31 * * *
32 * * *
33 * * *
34 * * *
35 * * *
36 * * *
37 * * *
38 * * *
39 * * *
40 * * *
41 * * *
42 * * *
43 * * *
44 * * *
45 * * *
46 * * *
47 * * *
48 * * *
49 * * *
50 * * *
51 * * *
52 * * *
53 * * *
54 * * *
55 * * *
56 * * *
57 * * *
58 * * *
59 * * *
60 * * *
61 * * *
62 * * *
63 * * *
64 * * *
What it means??
Please help !!
To post this question, I tried thierd time to change password, and before I tried to log in to App store, I logged in this community, and I could !
Then I could finally log in App store also.
But still I feel something is wrong with my connection.
Why the trace route does not show to the apple site ?This is a user to user forum. Apple is not here. Apple does not answer questions here.
iTunes Support -
http://www.apple.com/support/itunes/
Mac App Store Support -
http://www.apple.com/support/mac/app-store/ -
Hi, I'm a bit low on memory and I can't update the iOS. I need to move some photos off the iPad but I don't want to transfer them to a pc, I'd prefer to transfer them to iCloud and leave them there. Is that possible?
Yes, you could, because in this case you would have something like a backup in the cloud. BTW, personally I also like Flickr. Flickr offers you 1 TB (1000 GB) of free storage and automatic upload for photos since iOS 7 (it is a very attractive offer, at least for me)
-
Is it possible to print a JPanel from the application?
Hello,
Just a quick question: Is it possible to print a JPanel from your application? I have plotted a graph and I would like user to be able to print this with a click of a button (or similar)
Thanks very much for your help, its appreciated as always.
Harold ClementsIt is absolutely possible
Check out my StandardPrint class. Basically all you need to do is
(this is pseudocode. I don't remember the exact names of methods for all this stuff. Look it up if there's a problem)
PrinterJob pd = PrinterJob.createNewJob();
StandardPrint sp = new StandardPrint(yourComponent);
pd.setPageable(sp);
//if you want this
//pd.pageDialog();
pd.doPrint();You are welcome to have use and modify this class but please don't change the package or take credit for it as your own code.
StandardPrint.java
===============
package tjacobs.print;
import java.awt.*;
import java.awt.image.BufferedImage;
import java.awt.print.*;
import javax.print.PrintException;
public class StandardPrint implements Printable, Pageable {
Component c;
SpecialPrint sp;
PageFormat mFormat;
boolean mScale = false;
boolean mMaintainRatio = true;
public StandardPrint(Component c) {
this.c = c;
if (c instanceof SpecialPrint) {
sp = (SpecialPrint)c;
public StandardPrint(SpecialPrint sp) {
this.sp = sp;
public boolean isPrintScaled () {
return mScale;
public void setPrintScaled(boolean b) {
mScale = b;
public boolean getMaintainsAspect() {
return mMaintainRatio;
public void setMaintainsAspect(boolean b) {
mMaintainRatio = b;
public void start() throws PrinterException {
PrinterJob job = PrinterJob.getPrinterJob();
if (mFormat == null) {
mFormat = job.defaultPage();
job.setPageable(this);
if (job.printDialog()) {
job.print();
public void setPageFormat (PageFormat pf) {
mFormat = pf;
public void printStandardComponent (Pageable p) throws PrinterException {
PrinterJob job = PrinterJob.getPrinterJob();
job.setPageable(p);
job.print();
private Dimension getJobSize() {
if (sp != null) {
return sp.getPrintSize();
else {
return c.getSize();
public static Image preview (int width, int height, Printable sp, PageFormat pf, int pageNo) {
BufferedImage im = new BufferedImage(width, height, BufferedImage.TYPE_INT_RGB);
return preview (im, sp, pf, pageNo);
public static Image preview (Image im, Printable sp, PageFormat pf, int pageNo) {
Graphics2D g = (Graphics2D) im.getGraphics();
int width = im.getWidth(null);
int height = im.getHeight(null);
g.setColor(Color.WHITE);
g.fillRect(0, 0, width, height);
double hratio = height / pf.getHeight();
double wratio = width / pf.getWidth();
//g.scale(hratio, wratio);
try {
sp.print(g, pf, pageNo);
catch(PrinterException pe) {
pe.printStackTrace();
g.dispose();
return im;
public int print(Graphics gr, PageFormat format, int pageNo) {
mFormat = format;
if (pageNo > getNumberOfPages()) {
return Printable.NO_SUCH_PAGE;
Graphics2D g = (Graphics2D) gr;
g.drawRect(0, 0, (int)format.getWidth(), (int)format.getHeight());
g.translate((int)format.getImageableX(), (int)format.getImageableY());
Dimension size = getJobSize();
if (!isPrintScaled()) {
int horizontal = getNumHorizontalPages();
int vertical = getNumVerticalPages();
int horizontalOffset = (int) ((pageNo % horizontal) * format.getImageableWidth());
int verticalOffset = (int) ((pageNo / vertical) * format.getImageableHeight());
double ratio = getScreenRatio();
g.scale(1 / ratio, 1 / ratio);
g.translate(-horizontalOffset, -verticalOffset);
if (sp != null) {
sp.printerPaint(g);
else {
c.paint(g);
g.translate(horizontal, vertical);
g.scale(ratio, ratio);
else {
double ratio = getScreenRatio();
g.scale(1 / ratio, 1 / ratio);
double xScale = 1.0;
double yScale = 1.0;
double wid;
double ht;
if (sp != null) {
wid = sp.getPrintSize().width;
ht = sp.getPrintSize().height;
else {
wid = c.getWidth();
ht = c.getHeight();
xScale = format.getImageableWidth() / wid;
yScale = format.getImageableHeight() / ht;
if (getMaintainsAspect()) {
xScale = yScale = Math.min(xScale, yScale);
g.scale(xScale, yScale);
if (sp != null) {
sp.printerPaint(g);
else {
c.paint(g);
g.scale(1 / xScale, 1 / yScale);
g.scale(ratio, ratio);
g.translate((int)-format.getImageableX(), (int)-format.getImageableY());
return Printable.PAGE_EXISTS;
public int getNumHorizontalPages() {
Dimension size = getJobSize();
int imWidth = (int)mFormat.getImageableWidth();
int pWidth = 1 + (int)(size.width / getScreenRatio() / imWidth) - (imWidth == size.width ? 1 : 0);
return pWidth;
private double getScreenRatio () {
double res = Toolkit.getDefaultToolkit().getScreenResolution();
double ratio = res / 72.0;
return ratio;
public int getNumVerticalPages() {
Dimension size = getJobSize();
int imHeight = (int)mFormat.getImageableHeight();
int pHeight = (int) (1 + (size.height / getScreenRatio() / imHeight)) - (imHeight == size.height ? 1 : 0);
return pHeight;
public int getNumberOfPages() {
if (isPrintScaled()) return 1;
return getNumHorizontalPages() * getNumVerticalPages();
public Printable getPrintable(int i) {
return this;
public PageFormat getPageFormat(int page) {
if (mFormat == null) {
PrinterJob job = PrinterJob.getPrinterJob();
mFormat = job.defaultPage();
return mFormat;
} -
I am on a Windows 7 OS attempting to reduce pdf size with my Adobe Acrobat Standard XI & Pro. The application keeps timing out and at the Subsetting embedded fonts portion and the application gives "Adobe Acrobat has stopped working" and then closes. The document is 275 pages. Is there something I can do to stop this?
Hi Ricci,
Since when are you facing this issue? Did you tried system restore to a date before this problem occured.
Does acrobat stop working when you open this specific pdf file or with any pdf file that you open?
Regards,
Rahul -
I created an album in iPhoto 11 and I have placed photos in a certain order for her graduation party slideshow. I want to place that album or photos on a thumbdrive, but when I do I lose the order I placed them in the folder. renamed the photos starting with 1 and ending 262. thinking that would save the photos in order. Each time I try to export them that are placed in original folder names and descriptions need help.
This is a two part process. First we title the photos, then we export them, using the title as filename.
To title them
Once you have then in the order you want select them all and go
Photos -> Batch Change. Select set 'Title' to 'Text'
Choose a Title -> Graduation 2013 or whatever, then check the box at 'Append number to each photo.
Now, in the Album all your photos are named... Graduation 001, 002, 003 etc
Next Export them:
File -> Export, and in the Name option, choose 'Title as Filename' and complete the export.
Regards
TD -
Is it possible to change the name of the application in webdynpro
Hi ,
I created one application with 2 views .It is running perfectly.Now the problem here is i want to change the name of the application.Is it possible to edit the name of an application
Regards
Padma Nhi,
I want to create an application with name Z_XXX but while running the application it has to show only XXX at the top of the Application window
i dont think which u have mentioned is possible or Even i may be ignorant in that.
better give the Application name as XXX instead of Z_XXXX
Thanks and reagrds
Fistae -
Is it possible to deactivate a button on the application toolbar?
Hello everybody!
Is it possible to deactivate a button on the application toolbar from standard transaction like PA40?
I'd want to do it using an user-exit.
Thanks in advance.
Cristianthere is a push button on the std tool bar of pf-status 'Function code'.using that u can activate and deactivate teh function codes
or
Check this FM : RS_SET_SELSCREEN_STATUS
sample code :
DATA: BEGIN OF i_exc OCCURS 0,
code LIKE sy-ucomm,
END OF i_exc.
DATA: ws_repid like sy-repid.
CLEAR i_exc.
i_exc-code = 'ONLI'.
APPEND i_exc.
MOVE: sy-repid TO ws_repid .
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
EXPORTING
p_status = ' '
p_program = ws_repid
TABLES
p_exclude = i_exc. -
I had to reset my iPhone because forgotten pass code, I am trying to back up my iPhone to a previous date so I do t lose all my pictures, contacts, apps ect. I have done this before but never had this much trouble. Is this something I'm going to b able to do an restore all my things bag to my phone
What problem are you having when attempting to restore?
Are you using iCloud or iTunes to restore?
Have you looked through this?
http://support.apple.com/kb/ht1766 -
IPad constantly reboots every 2-3 minutes, after full recovery is not activated to wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more than 6 months, so please call customer service apple can not. by DFU also restored Official Ipad bought in a store in Russia. When buying activated immediately. IMEI 013311005943507. Help please! the official service Moscow representation FDA ipad offer to send in the U.S. for $ 500!
Hello this is happening to us also (minus the Bluetooth speaker). We can't figure out what is causing the data usage. I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started. Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours. My husband called Verizon and got the usual doubting Thomas response. I understand that they don't know my device settings. So over the phone we check all the settings and turned off every possible culprit eating up the data and end the call. By now I have purchased another gig for the month! Assured we are NOT using mobile data, we continue on the IE path to bliss. HA! A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data. After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card. This has stopped the data usage, but it defeats the purpose of having the data plan. I could have just stuck with my Surface. Verizon sent us a new sim card. Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot. I am surprised at the number of complaints about this device. When we called the Verizon support acted as though this was the first time they had heard about this. Loved your post, you should write for a living.
-
Update portion of air application
Hi,
I have a big air application (more then 200 MB)
When i do a new update i would create a package only with modified file (and not all)
I read that tha applicationdirecotry is ReadOnly so my application copy all file into
applicationStorageDirectory but i woul delete original file to avoid duplicate . What i can do?
i'm new with flex...thank for help
michy.Hi
thank for your replay
I use flex 3 with AIR 1.5 .....
(how i can change version of air with flex3')
Exist another way to update only a portion of AIR application? -
Hello Forum,
We have a SharePoint 2013 farm (Enterprise edition) that uses one single SQL Server 2012 (Standard edition). That statement means: All my SharePoint DBs e.g. (Config, Admin, Content, and Service Apps) DBs are hosted and running onto one single instance e.g.
Server1\SQLInstance1.
We have some new requirements to install and configure BI tools such as: PerformancePoint services and PowerPivot. BI tools require either SQL Server 2012 Enterprise or BI editions, and we do NOT want to upgrade our current SQL Server1\SQLInstance1
Instead, We have other separate SQL Server instance which is enterprise edition let's name it (ServerX\InstanceX) that is running standalone, and we are thinking or using it, and my 2 questions are:
1) Can we use this other separate
SQL Server instance which is enterprise edition to host the create and hosts the DBs of PerformancePoint services and PowerPivot ?
2) My second question is the same: Can I create PerformancePoint services application in my SharePoint farm, But in the Database Server field, I fill up
the details of the other DB server ServerX\InstanceX which is the one that is SQL
enterprise edition ? Will this work ?
Any official Microsoft resources/links tell that it is possible to deploy SharePoint or its service applications on multiple DB-Servers and multiple SQL Instances?Thank you Alex and Anil,
What are the ramifications of that?
I mean, Assuming that I have created such a farm where most of SarePoint DBs in Standard SQL instance while the PerformancePoint service application and others e.g. PowerPivot and reporting service are deployed and configured onto other Enterprise SQL instance.
Are there any recommendations or concerns that you would like to draw my attention to ?
Maybe you are looking for
-
After a computer crash, I had to load Thunderbird (v31.3.0) back into my machine running Windows 8.1, and I successfully imported my address book back up file into Thunderbird (v31.3.0). My problem is that I don't see an option to sort the address bo
-
HI gurus, while creating PR i am getting error like "please choose correct department code " please give me some advice so will give uou rewards Sarvesh Edited by: datla Sarvesh on Jun 10, 2008 6:25 AM
-
I have a simple report page with a couple of hidden items in a report region. When rendered, the hidden items are in a <table> without any <tr> tags. Like so: <table summary="" > <td></td> <td colspan="1" rowspan="1" align="left"> <input type="hidden
-
What is the reason of doing recording in BDC !
What is the reason of doing recording.....CAn we directly write the code ???
-
How we can store start time & end time taken by execution of scenerio?
Hi i want to store starting time and ending time taken by executing of any scenerio and date also on which scenerio will be executed. plz assist me regards the same thanks