Is it possible to made dashboard remember scenario on permanent basis as scenario button only allows this option on temporary basis

Dear Gurus:
I want to know, how can I made my dashboard to remember scenario on permanent basis as scenario button only allows this option on temporary basis, once you close your dashboard your scenario will no longer available using scenario button. I have a scenario that I want dashboard to remember scenario even if i close my dashboard. If you guys can guide me on this.
Best Regards:
Jawad K.sheikh

Check the below link which can help you in better.
Xcelsius "Scenario" button
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3022db0d-016d-2e10-c09c-b4ba48577065?QuickLink=index&…

Similar Messages

Possible to do if/then scenarios?

I work for a large company that has many sales branches throughout the US (40+). Each branch has a MPLS circuit and a local ISP. We have prioritized data that is sent over the MPLS circuit, and all other data over the ISP, with failover configured for either circuit to fail over to the other one. Right now all of the sales branches internet traffic (along with all non-priority traffic such as email) comes back thru the ISP (via a VPN tunnel) to our main location, so we can monitor the internet links. We would like configure the normal internet traffic to go out the ISP directly, but still have the email and so come back via the VPN tunnel. We know how to configure this, however, when we do this we would like to install a PC with some monitoring software on it (surf control), that way we can still monitor the internet traffic. We would like to set it up so that if the PC with Surf Control goes down, that the router will send traffic back over the VPN tunnel or MPLS traffic. So the basis of what I want to do is:
If PC Goes Down = False, Send Traffic To PC
If PC Goes Down = True, Send Data To VPN tunnel or MPLS circuit.
Is it possible to do such a scenario?
We do not currently have the budget for a pix or anything like this, so we are trying to figure it out. I have attached a very basic diagram of the basic network configuration that we have. Any suggestions would be appreciated.
Also we do have a Ciscoworks LMS 2.6 available as well if that would help at all.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5413/products_feature_guide09186a00801d862d.html
good luck,
Peter

Made to Order Scenario

Hi All,
Q1)What customisation settings are needed for a made to order scenario.
Q2) What do you mean by the terms Requirement Class and Req Type please do not give me notes from SAP help menu. Do explain in Simple language and with good examples since i have read sap help F1 and still could not follow.
Good anwers would be rewarded with points.
Regards
Atul Keshav

Hi Atul,
Hi,
Make-to-order:
Make-to-order processing takes place when inventory is not generally stoked but instead the firm wants until an order hass been placed and then produces just what has been ordered.
Ex: In this case, a deluxe motorcycle gas tank that must be produced form an unpainted tank, paint and gas cap. These are two processes that must be completed in the production -
paint the tank and when tank is dry, attach the gas cap.
The BOM are needed to create a given product. The routing information gives what processes need to be carried out in what order and even how long each process should take. All this information together can be used to determine what the total cost of the product and determining the profitability of the product.
ACreation of materials:---
T code: MM01
Ex; 1400-71xx
Enter material, ind. Sector and material type.
Select the org. levels plant, stor. Location, sales org, DC, Warehoused no, storage type.
Repeat the same process for all components.
BCreation of BOM:--
T code: CS01
CSet up routing:--
T code: CA02
Dpricing conditions:--
T code: VK11
Epurchasing materials:--
Create a purchasing order req. for components from vendor.
Create PO: ME21
FReceiving materials:--
GR:- MIGO
Go through MMBE then u will get stock available or not.
Process:
1. creating a sales order for product not kept in the inventory. This will atomically generated the relevant production order.
2. we assume production is done ahead of \schedule. After production is completed you will confirm production order as fully completed .
3. Newly determine the availability of sales order.
4. shipment
5. TO for delivery
6. Billing
7. Payments
Req. Class: Its a global control parameter for avalability check. It controls rerq. consumption strategy and req. planning strategy.
   11-- order req.
   21-- delivery req.
   41-- order/delivery req.
Req. type:- It specifies features of require,ment class. It is one of the controling feature in TOR
In TOR we can assign req. type to req. class.
Reward points if u helpful.
Cheers
Govind.

Is it possible? RFC to IDOC Scenario

Hi,
Is it possible direct RFC to IDOC scenario ?
How many message interface? Message mapping? Interface Mapping are neccessary.
(scenario is simple and i think there is no need for message type or data type as i can map my fields easily in message mapping)
I do not want to do RFC--File----IDOC scenario
regards
hussaan

searched on forum and found this solution
Three checkpoints:
1. Make sure you have entered the correct outbound and inbound interfaces.
2. Make sure you have activated your interfaces and mappings.
3. Make sure the cache is up-to-date (you can refresh cache by transaction sxi_cache).
Other very important tip when you create interface mapping.
Probably you did not select the inbound interface before selecting the Interface Mapping. First select the inbound interface (target interface), then you will see the interface mapping in the list
Go to your interface mapping and activate it. ( You might have to make a cosmetic change , like changing the description).
2. Go to transaction SXI_CACHE in the XI box and do a complete cache refresh. Once it is done, check that the mappings shown are the latest one.
ateeq
Edited by: ateeq lodhi on Nov 2, 2008 7:46 PM

Is it possible access to dashboards by using network users insted of obiee

Hi,
can anybody have idea about this
is it possible access to dashboard by using network users.insted of obiee users.i.ewhen you are login into presentation services it will ask user name and password. in this case it will not like that when we are log in to the sysytem by using user name and password.by using that user name and password it can directly access to the dashboard is it possible or not?means that by using network username and password can i able to login to the dashboard by cliking the presentation url.with out asking username and password again.
please help me
thanking you

Yes, you can and if your presentation services are hosted on a windows server, thats lot more easy. While the presentation server is being promoted, you can have users get authenticated using LDAP/AD and that way, you need not go through typing username/pwd once again.
Configure SSO
Set IIS authentication to “Windows authentication”:
Open IIS Manager => Select Default website => Right-click => Properties => Directory Security tab => Authentication and access contol => Edit … => deselect “Enable anonymous access” => Select “Integrated Windows authentication” => Ok => Ok => Select All => Ok
Open the instanceconfig.xml file (located in OracleBIData\web\config). Set <SSO enabled = “true”>. Save and close file.
Restart your server and start your OBIEE services.. You are good to go now.
Like others said, may be you are better off with closing your questions so others can use it.

Locking PDF but only allow further signatures & get the list of of changes made after signing

Hi,
I have looked at Adobe Acrobat 9.0 and found the Signing > locking feature which blocks any changes after the document is signed. I need to know whether using Acrobat SDK, one could implement a similar locking option via plugin in a way that it ONLY allows further blank signature fields to be created or sign existing ones and locks all other changes. If possible, any pointers to API functions would be appreciated.
If the above is not possible using Acrobat SDK 9.0 then can the SDK provides a list of all the set of changes made after the signing is performed (at the time of verification) in the form of some codes which can guide the plugin author about what change after signing was done e.g.
a blank signature field was signed
a blank signature field is created
watermark has been applied
form is filled
sticky notes/stamps/other annotations are added
Regards,
mwak

Thanks for your response. I have just performed this:
I signed a PDF ( having no prior signature or blank signature fields ) using Adobe Acrobat 9.0 and locked it. I am now not able to create more signatures on this PDF. I believe I can't add more signatures even using the Acrobat SDK and Lock means complete lock-down of the document. This is different to what you said " it restricts modifications EXCEPT for other signings" or may be I am not understanding it clearly.
I created two blank signature fields. When I clicked on the first, there is no Lock settings at the time of signing. I believe because If it is locked then the next signature can't be signed. With only a single signature field present, the lock feature is there.
So I believe I have to resort to the option of identifying the changes in a revision and then if it the change is related to say adding stamps, sticky notes prompts the user at the time of verification.
Can some one point me to the API functions set which identify list the objects which have changed after signing.
Regards,
mwak

Is it possible to have the Find My iPhone function on a PC. I have this app running well on all my OS devices. Just wondering if I can locate my OS devices from an "app" on my PC.

Is it possible to have the Find My iPhone function on a PC. I have this app running well on all my OS devices. Just wondering if I can locate my OS devices from an "app" on my PC.

I do not believe there's an app for that on PC. I do recommend getting the iCloud dashboard for PC and to try it there. I would myself if my PC was working.
PC ***** get a Mac.
You can always go to iCloud.com to find your phone.

Xcelsius "Scenario" button

Can you someone let me the path of Local scenario file. I saved the scenario file by "Scenario" button but I can't find where the file is stored from the PC.

Hi Thijs
Thanks for your update, I think this really helps me. And I have one more question.
I have seen a SAP notes regarding the Scenario function, the content is as below.
You use the Local Scenario button to save the final result of a specific simulation (created scenario) and return to it in the future. It only saves the scenario on the local machine where it was created. So you can access the scenario from the same machine, but you cannot transfer scenarios from one computer to another.
As per the note we can't transfer scenarios from one computer to another, my question is: If we publish the dashboard to inforview and save the scenario, the scenario will be saved in the BOE repositary or still on the local PC, and could the scenario be able to share among different users?
Thanks a lot

Xcelsius Scenario Button cannot set the Default Scenario

Hi,
I am facing a problem with the Scenario Button in Xcelsius the problem is i cannot set the Default Scenario in the Dashboard .
I can save load delete the the scenario but if i have 3 scenario and i want to make one of them as default is does not work.
I think there is some browser setting for this and i have already configured the storage setting for the browser .
Warm Regards,
Mishra Vibhav

Hi Thijs
Thanks for your update, I think this really helps me. And I have one more question.
I have seen a SAP notes regarding the Scenario function, the content is as below.
You use the Local Scenario button to save the final result of a specific simulation (created scenario) and return to it in the future. It only saves the scenario on the local machine where it was created. So you can access the scenario from the same machine, but you cannot transfer scenarios from one computer to another.
As per the note we can't transfer scenarios from one computer to another, my question is: If we publish the dashboard to inforview and save the scenario, the scenario will be saved in the BOE repositary or still on the local PC, and could the scenario be able to share among different users?
Thanks a lot

I can't completely control my cursor on my macbook pro, and it keeps jumping to the right of the screen and switching my screen to the dashboard or utilities. Any ideas on what might be causing this, and what I can do about it?

i can't completely control my cursor on my macbook pro, and it keeps jumping to the right of the screen and switching my screen to the dashboard or utilities. Any ideas on what might be causing this, and what I can do about it?

If you have another pointing device installed, remember that the Mac uses "all sources live". You can literally use two or more mice or two or more keyboards at once.
Your trackpad, if that is what you are using, must be very clean. Any debris may be seen as another "finger".

My iTunes downloads were made using my old gmail address. I had to quit using this email address as it got hacked. I created a new gmail account. How can I get my iTunes downloads into the new gmail account?

My iTunes downloads were made using my old gmail address. I had to quit using this address as it got hacked. How do I get my iTunes downloads into my new iTunes account that was created with a new gmail address? In my old iTunes account (with the old gmail address, I can't 'update' my email address or even 'add an alternate address' as I had already created this gmail account and inputting the new address into iTunes gives me the 'pop-up' that 'this account is already in use.' Advice please!

Good luck. It took me weeks to fix this when I had to do it. Your old ID branches out in lots of places. You may have to delete app and get them again, at least that is what Apple told me. Plus, all of your settings on your iPad that required any ID, will have to be changed. My old ID kept showing up in different places for weeks. Changing it on Apple.com is just the beginning.

Is it possible to only allow given MAC addresses to access ActiveSync in Exchange 2013?

We are designing a new Exchange 2013 environment for a client and one of their requests was to only allow known mobile devices to access ActiveSync.
I can see that you can allow or block remote devices based on IP Address, model, etc. but we'd need to allow devices based on their MAC Addresses.
Is it possible to use the built-in features of Exchange 2013 or IIS ARR to provide this feature?
Cheers for now
Russell

We are designing a new Exchange 2013 environment for a client and one of their requests was to only allow known mobile devices to access ActiveSync.
I can see that you can allow or block remote devices based on IP Address, model, etc. but we'd need to allow devices based on their MAC Addresses.
Is it possible to use the built-in features of Exchange 2013 or IIS ARR to provide this feature?
Cheers for now
Russell
No, but you can use DeviceId.
The ActiveSyncAllowedDeviceIDs parameter specifies one or more Exchange ActiveSync device IDs that are allowed to synchronize with the mailbox. A device ID is a text string that uniquely identifies the device. Use the
Get-MobileDevice cmdlet to see the devices that have Exchange ActiveSync partnerships with the mailbox.
To enter multiple values and overwrite any existing entries, use the following syntax:
<value1>,<value2>.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax:
"<value1>","<value2>"....
To add or remove one or more values without affecting any existing entries, use the following syntax:
@{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.
https://technet.microsoft.com/en-us/library/bb125264(v=exchg.150).aspx
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

My account was deleted for security issues. I made a new account, but I can't syncronise my apps with this new account. I bought a new Iphone and would like to transfer the apps ans music on this new one. Can somebody help me?

My account was deleted for security issues. I made a new account, but I can't syncronise my apps with this new account. I bought a new Iphone and would like to transfer the apps ans music on this new one. Can somebody help me?

Why would you make a new account? This will likely cause many problems. Just get you old account enabled.
Apple ID: "This Apple ID has been disabled for security reasons" alert appears
Frequently Asked Questions About Apple ID
Everything you purchased with the old account will always be tied to that account. You will have to authorize the computer for that account and you will have to update the apps from that account.

Every time I try to run iTunes I get an error message sayinh: An application has made an attempt to load the C runtime incorrectly. What does this mean

Every time I try to run iTunes I get an error message sayinh: An application has made an attempt to load the C runtime incorrectly. What does this mean

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Is it possible to save a data portion starting from when a "save" button is pressed?

Hi,
The below attached vi acquires data from a sensor. The sensor signal output can be reset to zero and the data saved into a file. However, the saved data comprises the data portion starting from when the vi starts running until the "stop" button is pressed. Is it possible to save the data portion starting from when the "save" button until the "stop" button are pressed?
Best regards,
Ninjatovitch
Solved!
Go to Solution.
Attachments:
Sensor Signal Acquisition.vi ‏52 KB

this should be in 8.2
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome
Attachments:
RandomNumberSubVI.vi ‏8 KB
savefilewhenselected.vi ‏11 KB
f.txt ‏1 KB

Is it possible to made dashboard remember scenario on permanent basis as scenario button only allows this option on temporary basis

Similar Messages

Maybe you are looking for