Is it possible to maintain v. 3.6.15 as a viable browser while testing the beta 4 version?

in the face of the 'issues' I've seen in the faq's, I was hoping there's a way to maintain my present version of Firefox while, at the same time, browsing with the beta 4 version. I believe it would be a good thing in the face of the fact my comp is a bit on the 'older' side.

I always run the a portable version out of a folder at first.For a few weeks anyway.Then if it runs OK I install as my main browser.It always gives me a chance to sort out which add ons work and which don't.Until I get all the add ons I want working right I keep using out of a folder.
I just put a short cut on the desk top.

Similar Messages

Addresses exist in local AD/Exchange environment; possible to send to those addresses internally and have them route out to the internet?

Short story; Company A acquires Company B. B is still using their external mail system for a period of time before transititioning to A's email. After B moves to A's mail server, they will continue to receive mail to their legacy addresses/domains
(companyb.com) for a period of time. B already has objects defined in A with a companya.com SMTP address. Is it possible to prestage B's objects with their legacy SMTP addresses, while at the same time allowing users from A to send messages
to B's legacy SMTP addresses and have it route out to the internet and not to B's local mailbox?
I realize that Exchange is first going to determine if the address is local, and if so deliver it, which is what is happening. But is there a rule/exception that can bypass that such that @companyb.com will go out a send connector even if the address
exists locally?

I realize that Exchange is first going to determine if the address is local, and if so deliver it, which is what is happening. But is there a rule/exception that can bypass that such that @companyb.com will go out a send connector even if the address
exists locally?
No. If the exact SMTP address exists in the org, it will never leave the Exchange org when sent from an authenticated user.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Is it possible to maintain table data in a maintenance view

hi all,
is it possible to maintain data in a table by using maintenance view.

Hi,
if you maintain texts of your objects in different languages it's better to use a maint. view:
example
1) ZTAB01 - CU-Data
2) ZTAB01T - texts to CU-Data
3) ZTAB01_V - maint.-view of 1) and 2)
hope that helps

Is it possible to maintain multiple payment formats with a single Program

Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer S

nazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

Is it possible to maintain multiple pymt frmts with in a single prgm 11i

Hi,
Is it possible to maintain multiple payment formats with in a single program in 11i
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer S

nazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

Is it possible to maintain a view vai Batch Input

Hi guys,
The user required to develop a BDC program to upload the data source from outside of SAP, and maintain these data into a view via Tcode: SM34. But it seems the view doesn't support Batch input.....
Can anybody tell me, is it possible to maintain a view via Batch input? Many thanks!
Brian Liu

Additional information:
This requirement is to upload the Overhead Rate data from outside of SAP, and maintained via KZM2 or SM34. But when I tried to record a BDC for KZM2, it seems that the SAP can not support batch input.
I find a SAP note 208474, it says:
Symptom
Overhead rates of the costing sheet of the overhead rates, which have been created, changed or deleted via batch input or Call Transaction, are not saved.
The same rates are saved if processing is carried out via Transaction KZZ2 or the Implementation Guide IMG.
Cause and prerequisites
Processing the Customizing transactions for maintaining the overhead rates of the costing sheet (Transaction KZZ2, KZM2) is
not supported in the batch input. This corresponds to the SAP standards according to which Customizing transactions in general need not necessarily be capable of batch input.
The batch input data of the overhead rates are not saved in the standard because processing is terminated by a COMMIT WORK. This statement ensures that the internal tables for the transport of the overhead rates are only deleted if their transfer to the database tables to be transported has been processed successfully.
Solution
The subsequent modification allows batch input processing of the overhead rates, by suppressing the COMMIT WORK statement. As a result of the modification, the tables in the transport request of the overhead rates may be incomplete in single cases.
In cases where the overhead rates have not been transferred completely to the target system after implementation of the modification, include the overhead rates again in a transport request, repeat the transport and, if necessary, subsequent processing.
Note that the attached modifications are not and will not be included in the R/3 standard system.
I modified the sap standard program L0COEF04 according to another SAP note 150041, but after the modification, I still couldn't record the BDC.
Anybody who have ever met the same situation, or can give me some suggestion? With many thanks!
Brian Liu

Is it possible to maintain two class type for a material

Dear All,
Is it possible to maintain two different class type for a material.
If a material assigned with the batch and the material is a part of variant configuration, then how to handle this scenario.
For Batch Management, class type will be 023, for Variant Configuration class type will be 200.
How to handle this scenario.
Please explain.
Regards,
Mullairaja
Edited by: MullaiRaja on Jan 5, 2011 5:19 AM

Mr.Raja
As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
We can assign many classes to a single class type of a material.
For configurable material, create the material using material type : KMAT.
& then, activate the 'batch management" control in the material master, for that material.
Pls revert with feedback.
Hope, that helps you.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM

How is ist possible to maintain the time dependencies for Abap Privileges?

How is ist possible to maintain the time dependencies for Abap Privileges?
In our Installation of SAP IDM 7.0 SP2 Patch 4 the time dependencies of Abap Roles are imported in the IC by Initial loads Jobs. How can the see / change the dependencies in our IDM Workflow UI? Presently nothing jet is shown, no Attribute is predefined..
Can anybody give us a hint?
Thank you in advance !!

If you click VIEW/SHOW PLAYHEAD INFO, you will see the timecodes as you scrub. (Consumer timecodes, not pro timecodes).
This works if you imported your footage from a camcorder, either miniDV or AVCHD.
However, if you have imported an analog file, or saved a DV file to a QuickTime File, you may just see the file creation date in VIEW PLAYHEAD.
However, there is a trick to getting even these clips to display timecodes if you know the start time.
First pick a clip. Make a copy and drag it to your desktop, just so you don't lose anything.
Rename this copy in the following format clip-yyyy-mm-dd hh;mm;ss.current file extension.
For example, clip-2001-07-14 09;30;45.mov (note the space between the day and the hour)
This would be a .mov clip that starts with the first frame at July 14, 2001 at 9:30:45 AM
Then import the clip into iMovie. You now have timecodes at the playhead.

Is it possible to maintain versioning of portal contents edited/created ?

Have few doubts about weblogic portal 9.2
1]Is it possible to maintain versioning of portal contents edited/created?
2]Can portal presentation mechanism hide selected output fields?
3]How will Presentation service support storage of view state in a repository?

Mr.Raja
As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
We can assign many classes to a single class type of a material.
For configurable material, create the material using material type : KMAT.
& then, activate the 'batch management" control in the material master, for that material.
Pls revert with feedback.
Hope, that helps you.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM

Is it possible to maintain the multiple address in the Vendor Master (XK01)

SCENARIO:
Vendor ( Ex.VEN) Address maintained in the SAP Vendor Master is the Corporate Address (M).
But I want to maintain delivery address as Address (X) and Remit Address as Address (Y) and
Billing address (Address on Invoice/Bill) as Address (Z).
Is it possible to maintain as mentioned in SAP Vendor Master (XK01)?
Please suggest, How can we go head and release the PO in the above scenario?
Regards,
SB

This can be easily acheived by Partner Functions
1.VN Vendor
2.SP Sold to party
3.SH Ship to Party
4.IP Invoicing Party
5.Delivery address
Please refer below link from help.sap.com
Partner Roles in Purchasing
http://help.sap.com/saphelp_470/helpdata/en/a1/7b373944f7a97ce10000000a114084/content.htm
regards,
Lalita

Is it possible to maintain moving average price u201CVu201Dfor HALB & Costing ?

Dear Gurus,
is it possible to maintain moving average price u201CVu201Dfor HALB Material which can procured from vendor & produced from plant in-house & costing the same ?
Kindly help

1. Yes, you can have price control as "V" for HALB material.
2. Split valuation is required to be maintained, if you want to use the same HALB material for procurement as well as inhouse production.
3. You can have standard cost estimates with price control as "V'. But, the same is not recommended by SAP. It can give a wrong picture in scenarios like settlement of a production order having GR quantity more than the Stock quantity.

Is it possible to maintain the same material master

Is it possible to maintain the same material master with same code in all plants in a company. Our client is using same materials in all their four plants?

Material numbers are always maintained at Company code level. If you look at the Material master data, some data is maintained at Company code level, some at Plant level and some at Storage location level. If you have all the 4 plants attached to one company code, they should have the same material number. What you need to do is to extend the material to all the 4 plants if thats your requirement. Also, if you have your valuation area as your Plant, then you have the flexibility to maintain Plant specific pricing for the same material.
You can use MM01 T code to copy material from old plant to new plant. But check for the required details in your new plant and make changes accordingly

Updating operands: Not possible to maintain before a certain date

Hello,
When I try to insert an operand value in ES31, I got the following returned message "Not possible to maintain before XX.XX.XXXX", where XX.XX.XXXX is the End Billing Period of the last bill. In my understanding, SAP does not allow updating an operand before the last bill, right? I need to maintain an operand value. Is there a way to insert an operand value before the last bill?
Thanks so much,
Sukasom

The problem is that we can not reverse the bill, because the customer had paid already.
We have a case where the orginal bill was incorrect, so we did the manual bill to either return the money or charge the customer more,
and then we need to insert operand value to maintain the past consumption.
Thank so much

Analytic Workspace Manager possible bug: Maintain Cube hangs

Hi All,
I am a newbe, I have been following the tutorial "Building OLAP 11g Cubes". http://www.oracle.com/technology/obe/olap_cube/buildicubes.htm
After the step "Maintain Cube SALES_CUBE", I got the information box "Loading facts for cube SALES_CUBE"...on the screen for the last 4 hours.
Is this normal? Should I kill the process and start again?
I am running Oracle 11g Enterprise Edition Release 11.1.0.7.0 on a Virtual Machine with Windows Server 2008 Standard SP1 with 1GB RAM.
The Analytic Workspace Manager is 11.2.0.1.0 running on a Windows XP SP3.
Any help is much appreciated

I'm getting a similar problem, I cannot maintain cubes that worked fine yesterday:
An error has occurred on the server
Error class: Express Failure
Server error descriptions:
INI: error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>
INI: XOQ-01706: An unexpected condition occurred during the build: "TxsOqLoadCommandProcessor::generatePartitionListSource-unsupported join condition-table"., Generic at xsoqBuild
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.executeBuild(Unknown Source)
at oracle.olap.awm.wizard.awbuild.UBuildWizardHelper$1.construct(Unknown Source)
at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
It all started after I tried to add a calculated measure to an existing cube (something I have done before in 11g...a feature I love).
This is too bad, so far I've been loving 11g Olap as compared to 10g Olap. But now 11g is starting to crop up these bullshit bugs as well. I guess OLAP is still too crappy to rely on for production....good thing I won't recommend a rollout of this product to my clients. It's a great tool for having fun with development, but using Oracle Olap + AWM in a real company is career suicide.
AWM 11.2.01

Is it possible to open up an excel file inside a Web Browser not IE?

I'm trying to find out if it is possible to open up a pivot excel file inside the a web browser, but i don't want to use Internet Explorer for that i'd prefer firefox for that.
I have a web application that uses an excel file for one of its reports but i don't want the user to have to download the file in order to view the report and that particular report has various ordering criteria so i don't want any of the funtionality of the file to be lost in the process, so is it possible to do it? what tools would help me acomplish that?

I don't think this is possible.
You may be able to make it display in Firefox if the file is defined as the XML Excel format and not the xls or xlsx formats. But that would require saving the file differently and you would most likely loose all/most functionality
You may find some Excel translators in Java (most notably POI from Apache). But they would still require you to adapt them to web format and you would have to duplicate much of the Excel functionality yourself. So it would be a long term option.
You could check out Google Docs. They have a spreadsheet application that I believe can convert Excel files to their format. You may be able to use it inside your web site with permissions.

Is it possible to maintain v. 3.6.15 as a viable browser while testing the beta 4 version?

Similar Messages

Maybe you are looking for