Is it possible to maintain versioning of portal contents edited/created ?

Have few doubts about weblogic portal 9.2
1]Is it possible to maintain versioning of portal contents edited/created?
2]Can portal presentation mechanism hide selected output fields?
3]How will Presentation service support storage of view state in a repository?

Mr.Raja
As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
We can assign many classes to  a single class type of  a material.
For configurable material, create the material using material type : KMAT.
& then, activate the 'batch management" control in the material master, for that material.
Pls revert with feedback.
Hope, that helps you.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM

Similar Messages

  • Is it now possible with new version of Adobe Muse to create and HTML Newletter.

    I am in a bit of a rush because I have an e-blast to prepare for a customer and I was wondering if it is it now possible with new version of Adobe Muse to create an HTML newletter? I have never created an html newletter before, if it is not possible with muse, and I do not code, would mailchimp be the best choice. If it is possible with muse, would it be possible to please provide me with the steps or a tutorial?
    Thank you.

    The quick answer is, no. The output of Muse is designed to work with popular web browsers on desktops and devices. It relies on many features of HTML that are not supported by e-mail readers.

  • Tranport portal content from SP14 to SP18

    Hello,
    Is it possible and advisable to transport portal content (iviews, roles, etc) from a portal on EP6 SP14 to EP6 SP18?  Do I need to manually move configuration from one portal to the other?  What are my options?
    Thank you for feedback.
    Kevin

    Hi Kevin,
    There should be absolutely no problem in transporting EPAs from SP14 to SP18 (as far as the transport mechanism in concerned; as far as SP14 based PAR implementations are concerned, they maybe should be checked if they use some undocumented APIs which are always subject to change without notice, but from your question I don't think that this was your problem/question).
    > Do I need to manually move configuration from one portal to the other
    What conf are you thinking of? As far as PCD objects and their conf is concerned, as said, for that you should use the normal transport packages.
    As far as the KM config is concerned, this can be transported, too, but that is (totally independent from SP-level questions) something where one has to be careful (the best choice is only to bundle a configArchive with special own settings one is aware of, and not to transport the complete KM config).
    Hope it helps
    Detlev

  • What is Portal Content Development? What componets it consists

    Hi All,
    I am very new to SAP. Now am getting training in SAP Portal. I want to know What is Portal Content Development? What componets it consists? Can you please help me.
    Thanks,
    jyothi.

    Hi Jothi,
    All the content relevant to maintaining the portal is organized and Developed in Portal content Development.The Portal Content Object Model consist of content objects such as these:
                                          u2022 iViews
                                          u2022 Pages
                                          u2022 Worksets
                                          u2022 Roles
                                          u2022 Layouts
    One of the main components of the portal architecture is the Portal Content Directory in which all the content required to maintain the portal is stored and maintained. The Portal Content Directory is the central place to
                        u2022 create various content objects
                        u2022 administer them by assigning permissions and changing their properties
    Please find the below links
    http://wiki.sdn.sap.com/wiki/display/EP/ConceptsofPortalandits+Architecture
    http://wiki.sdn.sap.com/wiki/display/EP/PortalContentDevelopment
    http://help.sap.com/saphelp_nw04/helpdata/EN/6b/a7a62102194ad0879b19731905d2de/frameset.htm
    Hope this helps.
    Thanks,
    Rahul

  • Is it possible to maintain table data in a maintenance view

    hi all,
    is it possible to maintain data in a table by using maintenance view.

    Hi,
    if you maintain texts of your objects in different languages it's better to use a maint. view:
    example
    1) ZTAB01 - CU-Data
    2) ZTAB01T - texts to CU-Data
    3) ZTAB01_V - maint.-view of 1) and 2)
    hope that helps

  • Is it possible to maintain multiple payment formats with a single Program

    Hi,
    Is it possible to maintain multiple payment formats with in a single program.
    For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
    When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
    if its possible could you please tel us where to define the parameters in Setups.
    Many thanks,
    Zaheer S

    nazzu wrote:
    Hi,
    Is it possible to maintain multiple payment formats with in a single program.
    For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
    When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
    if its possible could you please tel us where to define the parameters in Setups.
    Many thanks,
    Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

  • Is it possible to maintain multiple pymt  frmts with in a single prgm 11i

    Hi,
    Is it possible to maintain multiple payment formats with in a single program in 11i
    For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
    When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
    if its possible could you please tel us where to define the parameters in Setups.
    Many thanks,
    Zaheer S

    nazzu wrote:
    Hi,
    Is it possible to maintain multiple payment formats with in a single program.
    For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
    When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
    if its possible could you please tel us where to define the parameters in Setups.
    Many thanks,
    Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

  • Is it possible to maintain a view vai Batch Input

    Hi guys,
    The user required to develop a BDC program to upload the data source from outside of SAP, and maintain these data into a view via Tcode: SM34. But it seems the view doesn't support Batch input.....
    Can anybody tell me, is it possible to maintain a view via Batch input? Many thanks!
    Brian Liu

    Additional information:
    This requirement is to upload the Overhead Rate data from outside of SAP, and maintained via KZM2 or SM34. But when I tried to record a BDC for KZM2, it seems that the SAP can not support batch input.
    I find a SAP note 208474, it says:
    Symptom
    Overhead rates of the costing sheet of the overhead rates, which have been created, changed or deleted via batch input or Call Transaction, are not saved.
    The same rates are saved if processing is carried out via Transaction KZZ2 or the Implementation Guide IMG.
    Cause and prerequisites
    Processing the Customizing transactions for maintaining the overhead rates of the costing sheet (Transaction KZZ2, KZM2) is
    not supported in the batch input. This corresponds to the SAP standards according to which Customizing transactions in general need not necessarily be capable of batch input.
    The batch input data of the overhead rates are not saved in the standard because processing is terminated by a COMMIT WORK. This statement ensures that the internal tables for the transport of the overhead rates are only deleted if their transfer to the database tables to be transported has been processed successfully.
    Solution
    The subsequent modification allows batch input processing of the overhead rates, by suppressing the COMMIT WORK statement. As a result of the modification, the tables in the transport request of the overhead rates may be incomplete in single cases.
    In cases where the overhead rates have not been transferred completely to the target system after implementation of the modification, include the overhead rates again in a transport request, repeat the transport and, if necessary, subsequent processing.
    Note that the attached modifications are not and will not be included in the R/3 standard system.
    I modified the sap standard program L0COEF04 according to another SAP note 150041, but after the modification, I still couldn't record the BDC.
    Anybody who have ever met the same situation, or can give me some suggestion? With many thanks!
    Brian Liu

  • Is it possible to maintain two class type for a material

    Dear All,
    Is it possible to maintain two different class type for a material.
    If a material assigned with the batch and the material is a part of variant configuration, then how to handle this scenario.
    For Batch Management, class type will be 023, for Variant Configuration class type will be 200.
    How to handle this scenario.
    Please explain.
    Regards,
    Mullairaja
    Edited by: MullaiRaja on Jan 5, 2011 5:19 AM

    Mr.Raja
    As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
    We can assign many classes to  a single class type of  a material.
    For configurable material, create the material using material type : KMAT.
    & then, activate the 'batch management" control in the material master, for that material.
    Pls revert with feedback.
    Hope, that helps you.
    Rgds
    Sumanth.Gururaj
    Consultant/Systems Analyst - SAP SD/MM

  • Background Job Still Running - Data Can Be Displayed Only Msg Populated in Maintain Versions (OKEQ) Screen

    Hi,
    I try to create 2013 FY in "Setting for Each FY" in OKEQ - Maintain Versions unfortunately I have created Null FY, try to delete Null FY on the time it will ask Job schedule, I have cancelled the job & reopen Maintain Versions (OKEQ) screen on the time system populated the msg "Background Job still running - Data can be displayed only"
    In Settings for Each FY screen there is no New Entries button, all FY are blocked status, changes was not allowed.
    How can I resolve it.
    Waiting for your valuable suggestions.
    Regards,
    Nageswar.

    Dear Rajneesh Saxena
    Thanks for your prompt reply.
    Yes you are correct, on the time of deletion it will ask Background Job Process, for immediate deletion must & should select "NO".
    While "Settings for Each FY" screen populates message "Background Job Still Running - Data Can Be Displayed Only" open  screen in display mode enter the command "=KILL" in command bar press enter, then you will allow to changes get New Entries button also.
    Problem is solved
    Regards,
    Nageswar.

  • How  to maintain version in ERwin Data Modeler

    Hi all
    Please tell me
    how to maintain version in ERwin Data Modeler
    regards

    In SharePoint, navigate to the form library, and then click Library Tools > Library > Settings > Library Settings.
    On the Form Library Settings page under General Settings, click
    Versioning settings.
    On the Versioning Settings page under the Document Version History section, select either the
    Create major versions option or the Create major and minor (draft) versions option, and click
    OK.
    http://www.bizsupportonline.net/blog/2012/10/version-control-infopath-forms-templates-sharepoint-libraries/
     Or
    plan this wsp nfoPath_VersionHistory.wsp
    http://infopathversioning.codeplex.com/

  • Action not possible because change version exist

    Dear All,
    We are at SRM5.0- Extended Classic scenario and facing issues for changing some of the PO documents.
    When the buyers are trying to change the PO, error is getting populated as 'Action not possible because change version exist'. This error is not allowing us to change the PO.
    These POs are changed in the past and all the relevant changes are reflected to backend system with no issues. In other words Change Versions do exists for these POs. Flags for Change Version completion is also set and all historical versions can be seen but without change history.
    Additional information -
    1. No approval workflows are implemented for PO.
    2. No locks are active for these documents.
    Appreciate your help!
    Regards,
    Sagar

    Hi Sagar and thanks for your response,
    well, actually the active change version won't be preserved in any case. It would be overwritten in the first scenario, and deleted in the second one. The reason why I'd like to have this "brute force" method is to face an eventual human error. Suppose that a disalignment between R3 and SRM has been created; my report basically "alligns" the SRM version to the corresponding R3 one. And suppose also that the user made a mistake so that the program must be used a second time. I'd like to provide a way to "UNDO" the first execution of the program, that is to say: i'd like to provide a way to OVERWRITE the actual active, change version, or alternatively delete the change version that the report did create the first time it has been launched.
    Hope it's a bit clearer now
    Thanks for any hint/suggestion you can give me
    EDIT: Oh, and please... can you provide me further information about your solution? I mean, use of that FM to unlock an active version of the PO and then the proper call to BBP_PD_PO_UPDATE specifying how you managed input params. Thanks a lot
    Edited by: Matteo Montalto on Apr 9, 2009 11:43 AM

  • When your search tab is on you can't highlight or add note etc to the pdf. While this was possible in previous version. Please fix this, it's very annoying [iOS]

    When your search tab is on you can't highlight or add note etc to the pdf. While this was possible in previous version. Please fix this, it's very annoying

    Hi,
    Acrobat PDF reader for iOS.
    Thanks,

  • How to check the Business Package version in portal

    Hi All,
    I need information on business package version which is running in portal. after the business package deployed in portal then we could see the content in portal content->content provided by SAP folder.
    Recently we upgraded the Busiess Package of XRPM from 4.5 to 5.0  in portal, now i wanted to see what the content currently running in Portal whether it is Business Package of 4.5 or 5.0 version??
    Please let me know where could we check the BP version which is running in portal??
    Please get back to me with your inputs
    Thanks in advance
    Regards
    PortalUser100

    Hello,
    Please look in the http://HOST:PORT/index.html here you can find the link for the portal information. then click on system information >> component information. here you can find the all the deployed content running in the portal.
    Best Regards,
    Arun Jaiswal

  • How is ist possible to maintain the time dependencies for Abap Privileges?

    How is ist possible to maintain the time dependencies for Abap Privileges?
    In our Installation of SAP IDM 7.0 SP2 Patch 4 the time dependencies of Abap Roles are imported in the IC by Initial loads Jobs. How can the see / change the dependencies in our IDM Workflow UI? Presently nothing jet is shown, no Attribute is predefined..
    Can anybody give us a hint?
    Thank you in advance !!

    If you click VIEW/SHOW PLAYHEAD INFO, you will see the timecodes as you scrub. (Consumer timecodes, not pro timecodes).
    This works if you imported your footage from a camcorder, either miniDV or AVCHD.
    However, if you have imported an analog file, or saved a DV file to a QuickTime File, you may just see the file creation date in VIEW PLAYHEAD.
    However, there is a trick to getting even these clips to display timecodes if you know the start time.
    First pick a clip. Make a copy and drag it to your desktop, just so you don't lose anything.
    Rename this copy in the following format clip-yyyy-mm-dd hh;mm;ss.current file extension.
    For example, clip-2001-07-14 09;30;45.mov (note the space between the day and the hour)
    This would be a .mov clip that starts with the first frame at July 14, 2001 at 9:30:45 AM
    Then import the clip into iMovie. You now have timecodes at the playhead.

Maybe you are looking for

  • The Ipod cannot sync - disk cannot be read from or written to - Work around

    I have been having the same problem and have talked to Apple support several times. It seems like the major problem is with Windows xp media center edition. They got back to me today with not a solution, but a work around. It seems to be working so f

  • Ipod classic not being recognized

    I was trying to sync my ipod classic, and all of sudden the driver was not recognized, and the ipod went just blank. Now i have a white screen, and it will not trun off.

  • OWB maping execution :- ORA-20213: Unable to create standalone job record

    Hi, When I am running an owb mapping from sqlplus, I am getting the following error: SQL> DECLARE 2 RetVal NUMBER; 3 P_ENV WB_RT_MAPAUDIT.WB_RT_NAME_VALUES; 4 BEGIN 5 RetVal := UII_D_MAP_SPC_WIPBIN.MAIN ( P_ENV ); 6 dbms_output.put_line('RetVal is '|

  • Changing menu/title in Mac OS X

    I learned how to move the Swing menu to the top of the page*, but the left most menu item item still shows as the fully qualified class name of my application object, e.g. "com.dink.donk.MyApp". I would like to change that to just "MyApp" but I can't

  • Using TC as wifi extender?

    I bought a wireless TC hoping to use it as an internet extender but I cannot get the TC to connect to my cable router wirelessly.