Is it possible to make a 3D animation of the earth orbiting the sun?

Every time i try it just freaks out and takes a random path to the next keyframe.

Still the moon but around the earth. How to Create rotating planets and moons in Photoshop « Photoshop
Earth would not case shadow on sun so lighting would be different and the earth orbit is an ellipse not circular. But his embedded movie make it look like they are rotating at different rates. perhaps both sphere surfaces could be a movie.
I did put a light inside a hollow Earth http://www.mouseprints.net/old/dpr/Insidelight.mp4

Similar Messages

  • I have installed CC in my IMac. Now 4 trial days left. Is it possible to make my trial version to licensed one without the help of a reseller, by purchasing the software direct from Adobe?

    I have installed CC in my IMac. Now 4 trial days left. Is it possible to make my trial version to licensed one without the help of a reseller, by purchasing the software direct from Adobe?

    That depends on where you live... not all countries allow you to buy direct... with ZERO country information, nobody can answer your question... what happens when you try to buy direct from Adobe?
    http://www.adobe.com/products/creativecloud/faq.html
    http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
    What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
    Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
    Cloud Plans https://creative.adobe.com/plans
    -and subscription terms http://www.adobe.com/misc/subscription_terms.html

  • Is it possible to make a cartoon animation video with Premiere Elements ?

    Is it possible to insert 16 different images every seconds in a video ? I will like to make an cartoon animation. Is it possible with Premiere Elements ? It look like it is only possible to change a picture/image every 1 seconds.
    What software is good to make a small cartoon in size 140 * 140 pixels ?
    Best regards,
    Bo

    Bo,
    Welcome to the forum.
    Doing stop-motion animation in PrE is easy, but as PrE is designed for common Video Frame Sizes, that 140 x 140 pixels will be tough. However, if you create your images at a larger size, that matches a common Video Frame Size, say 720 x 480, you can output to smaller size. In general terms, Video is horizontal rectangular.
    To do the stop-motion animation in PrE, irrespective of that Frame Size, you would go to Edit>Preferences>General>Still Frame Duration, and there, you can set that Duration from 1 Frame, to almost infinity. Note: unlike some other settings on that General screne, the Still Frame Duration is in Frames.
    You might be better off using a program like Photoshop Elements, and outputting to an Animated GIF. There are also many Animated GIF programs available, and many are free.
    Adobe Flash would be a great choice, but it's not inexpensive. Same for Adobe After Effects. Both of those are designed to do all sorts of non-standard Video animations. However, for the price of either of those, one could buy dozens of Animated GIF creation programs.
    PrE can do similar with Animated GIF (I could not find this in PrE 11, but others found it in previous versions), but due to its design around common Video specs., there will be limitations to overcome.
    Good luck,
    Hunt

  • Is it possible to make a shopping cart that only sends me the info

    I'm trying to make a shopping cart that only sends me the info for my photography site I then deliver the photo to the client in person

    Hi,
    Please take look to this thread, might be helpful
    shopping cart without payments.

  • Is it possible to make a link in a mobile site close the browser window on the iPhone?

    I'm developing a mobile site specifically for iPhone users and on my home page I have a disclaimer saying something like do not browse this site while driving. I give them the option to continue by clicking a link or to close the browser by clikcinga link. So far I haven't been able to find a script that can handle that for mobile, or more specifically, the iPhone. Can this be done on the iPhone and what versions are limited to this feature?

    Ok let me ask you IF the IT department of your workplace does NOT want OS X installed on "THEIR" (The Companies) computers because of what they think is some type of security issue why are you trying to go against their wishes and install OS X on a computer that is NOT owned by you.
    That could cost you your job.
    If you continue down this path you will screw up the Windows install and have to take the system back to the IT department to get it fixed. What do you think they will say at that point?
    Do as you like but you would be better off just buying your own Mac computer if you are set on using OS X as your personal operating system.

  • Is it possible to make a built of bullets and images at the same time?

    Hi,
    I build a slide with a bullet entry that appear one at a time. Quite easy. But each time I draw a bullet I would like to have an image appear with each one.
    Other than that, I only see the built of bullet as separate text object with image built in the middle. Right?
    Thanks

    That'll do it. Can have image build on same click or time point if automatic by using the +automatically with+ option in build drawer
    Message was edited by: wideEyedPupil

  • Is it possible to make a move in contouring mode with onboard program

    I use Labview 7.1.
    I have a motion board 7344.
    Is it possible to make a move in contouring mode (as in the attached vi) with onboard program and how do that?
    Attachments:
    Onboard_program.vi ‏79 KB

    It's not possible to use the contouring mode in an onboard program like you did it in your example. The reason is that while the program is downloaded the write buffer.flx is NOT executed. Thus it can't download the buffer data stored in your front panel arrays. When you start the onboard program later it doesn't have access to your buffer data on the front panel.
    In fact I don't see a real advantage why you would like to run the write buffer.flx in an onboard program. You could configure and download the buffer on the host and then use it in an onboard program.
    Best regards,
    Jochen Klier
    NI-Germany

  • Is it possible to make 2 time machine back-ups on the same disk

    Hi, i have 2 MacBook Pros, I have a time machine back-up for the newer one on my 500GB hard drive
    I went to boot camp my other mac and it says I have to format the hard-drive, so I want to back everything on the old mac up, is it possible to make a seperate time machine back-up on the same external hard drive as I don't want to overwrite the back-up for my new mac? How can I do this
    Thanks

    andy.lawrence wrote:
    you might have mentioned this before, but once I have partitioned my external drive, how can I go about re-formatting the old mac hard drive and then restoring my data back onto it?
    You don't have to re-format it first; you need to erase and restore to "pack" everything into the first part of the drive so there's enough room on the rest of it for +Boot Camp+ to make a partition.
    See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
    Then use +Boot Camp+ to make the second partition.
    Also, would it be better to run the OS X install disc, re-format the hard drive, and then when running setup assistant migrate all my information from the time machine back-up?
    No. You'd have to install OSX, then use +Setup Assistant,+ then download and install the "combo" update (and other updates) to get back to the version of OSX you're running. And you might have to re-authorize and/or reinstall some 3rd-party apps.
    If i do this, at the moment Im running snow leopard but the install disc is simply leopard, will this matter once I've migrated all my data across?
    Do not use a Leopard Install disc to restore a Snow Leopard backup. It can copy everything, but the result either won't start or will kernel panic on startup. You must use a Snow Leopard Install disc.
    (And please update your signature, via the +My settings+ link at the right.)

  • Is it possible to get 2-ch signals from TDS2012 oscilloscope at the same time with LabVIEW "7.0"?

    Hi, everyone.
    I've been trying to get the signals from 2-ch of Tektronix TDS2012 oscilloscope at the same time using IVI connection with LabVIEW "7.0"
    I've already searched this developer zone for the answer.
    I've tried the famous example: "IviScope - Acq Dual Wfm Edge Triggered.vi"
    and it gave me the error message like:
    Error -1074110451 occurred at IviScope Initialize With Options.vi
    Possible reason(s):
    Driver Status:  (Hex 0xBFFA600D) Primary Error: (Hex 0xBFFA600D) The Config Server module is not present on the system.
    I think I've installed all~ the required softwares for IVI. For example, ICP 2.2, IVI engine 2.0.46, and tktds1k2k ivi (instrument driver for tds2012, in fact this one is for LabVIEW "7.1"... :-P)
    TDS2012 and my computer is connected through HPIB(GPIB) and it is shown on the MAX (a GPIB instrument as well as an IVI hardware asset)
    I've tried GPIB connection but it gives me asynchronous signals...
    Is it possible to get 2 signals at the same time with LabVIEW 7.0(not 7.1 or higher) by any means?
    What in the earth is the "Config Server" in this case?
    I don't need to sticking to IVI and any method to achieve my goal will be welcome.
    Could anyone give me the hint for this problem, plz?

    I think your problem is that the instrument specific driver is version 7.1 and you are using the class driver with 7.0. You can create your own 7.0 driver by downloading the LabWindows driver and using the Import CVI Instrument Driver under the Tools>Instrumentation menu.
    Since you don't seem to have a good reason to use IVI, why don't you try the native LabVIEW driver at http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9139659CE034080020E748.... I believe you have all of the functions to setup each channel and then when you trigger the scope, both channels will be captured. You would then transfer each waveform separately. The data is always read sequentially but that's not important as long as both channels are triggered at the same time.

  • Is it possible to make this sort of animation in Flash

    http://www.youtube.com/watch?v=KaxwewQKlsE&feature=related
    You know at the beginner, after the word 'table', you know how the entire sentence fliped to the left. This is what I would like to learn. What do you call that? Is it camera? Where can I find tutorial like that?

    yes, that's possible in flash (and that's a rotation in flash).  i don't know what you call that in after effects.
    there's not much to that but some basic text effects.  flash doesn't have any built-in effects so you'll have to create those yourself or find a component that may do some of that for you.
    use google to search for a tutorial:  flash <your as version> text effects.

  • Is it possible to make an object to always face the camera (in 3d)?

    I have an animation with a camera flying through a map in 3D.
    Is it possible to make all my texts layers automatically "face" the camera, no matter what movement the camera makes in 3d?
    Thanks in advance,
    Morimitsu Yamauchi

    Sure, just use the Basic Motion > Point At behavior and make the camera the target. You'll need to tweak the settings a bit.

  • Is it possible to make a code editor in Java?

    I'm new to java and so i'd like to know if it would be possible to make a simple code editor for Mobile Phones with Java.
    The code editor will be for GML.
    I'd like to make it so that the code can be easily edited on a wide range Mobile phones (not necissarily smart phones).
    If this is possible, I would greatly appreaciate any help or advice. Thanks.
    skinnyeddy

    TuringPest wrote:
    Hippolyte wrote:
    skinnyeddy wrote:
    "first list the areas in which you are proficient" - I'm not. I thought it would be easy to make a simple text/code editor in java without any experience. That was a bit of a mistake. Looks like I'll have to learn the hard way :SIMHO, one should woodshed it, work on programming basics and object-oriented programming fundamentals, in Java for at least one year before attempting to write any GUI code. Even day in this forum we see what code looks like when this advice is not followed.my first java code 5 years ago was an applet with a changing 2d function being animated.
    it worked after 2 grueling days and i was so happy because visual feedback was my only motivation.
    so its hard to say. granted, my code was awful for a long time.I'm thinking of the guy last week who had Swing+JDBC code and kept pestering for help on an obvious syntax error (he was invoking a method with no arguments when it was defined to take a String array) and for the life of him, he couldn't see the error or understand the error message. Posters kept telling him to learn the fundamentals first, but he was stubborn and kept demanding someone fix his syntax error...

  • I would like to make a movie of me speaking while doing a power point presentation.  I have seen this done with the powerpoint embedded on the screen and the speaker doing the talking on the rest of the screen.  Is it possible to do this in iMovie?

    I would like to make a movie of me speaking while doing a power point presentation.  I have seen this done with the powerpoint embedded on the screen and the speaker doing the talking on the rest of the screen.  Is it possible to do this in iMovie?

    Scrof wrote:
    ....  Is it possible to do this in iMovie?
    sure.
    the ppt has to be some kind of 'video' iM supports.
    so export it from with MS Office as a Quicktime movie, preffered with 'Animation' codec, or as appleintermediatecodec .. for quality reasons.
    you need the Talking Head as a 2nd video.
    then use iM's Pic-In-Pic feature to combine both videos as wanted.
    I would suggest to do some editing (you full-screen, the ppt full-screen, perhaps 'close ups' of some charts, cut-aways to snoozing audience, etc) to 'pep' the video. for this purpose, it could be much esier to export each slide from within PPT as a jpeg and create the 'flow' in iM only... except, you need the ppt-animations ... but, who uses animations in a presentation anyhow ... ?

  • Can I use adobe presenter to make a flipbook animation

    Hello,
    Is it possible to utilize Adobe presenter features to make a flipbook animation?  My goal is to make a short video to be displayed onto an Adobe presenter presentation that features a book which stops at certain pages of the book after having the animation that it is flipping through the pages.  Please advise.
    Thank you in advance

    If I understand your question correctly then I would say no..... then think about it and then answer .... yes. The reason why I say no is because it is not Presenter per-say that creates the animations. Presenter is merely a tool that creates a housing for the animation that will be created in another program like Power Point or Flash. I said yes because Presenter makes it easy for one to import swf files into Presenter/Power Point.
    Me personally I would create the animation in Flash and then import it into Presenter.
    Then I would only import it into Presenter if it was part of a Power Point presentation. I would rather publish it directly from Flash.
    If however money if a problem and you do not have Flash or you need to do it in Power Point I am sure you will be able to do it (I do think that it will be a little more difficult and you would not be able to attain the same standard as you would in Flash).
    I know that this might be long winded but Presenter in itself will not be able to do what you want you will have to use an animation program like Power Point or Flash to accomplish this.
    Good Luck

  • How can I make a transparent animated gif?

    I'm using CS2. I have an animated gif that I want to take the black background out of so that the animated part of it is all that remains.
    Here is a link to the image:
    http://img.photobucket.com/albums/v97/tragicmike/random/Tesseract.gif
    I basically want to remove all of the black background from the image so that the animated tesseract is all that remains. I know how to open the gif to expose the layers using ImaegeReady, then edit them in PhotoShop. But when I made the black areas of each layer transparent (by selecting the RGB channel, inverting the selection, and hitting delete), saved a copy, and tried viewing it, it seems to just display all of the transparent layers constantly instead of cycling through them.
    Can someone please help me figure out how to make an animated gif with a transparent background? If I lose some of the black areas of the animated part (since they seem to get deleted when I remove all of the black background) it's no big deal. I just need to know how to do this so that it plays correctly.
    Thank you!!!
    Mike

    &gt;
    <b>"I have to wonder why the black background was included on every frame of the moving shape."</b>
    <br />
    <br />Well, George...the only reason I can think of is because it's an animated GIF, and GIFs only support one layer.
    <br />
    <br />Whatever application it was created in should have been able to render it out with a transparent BG. But I suppose the creator had his/her reasons for going with the black BG.
    <br />
    <br />(Full disclosure: I ran across
    <s>that same</s> a similar animation back in December, and the version I grabbed only had the black showing through the inside of the tesseract. I opened it in ImageReady and
    <b>
    <i>added</i>
    </b> a black BG so the edges didn't look jaggedy.)
    <br />
    <br />
    <a href="http://www.pixentral.com/show.php?picture=1FgHXbj4UpXYtUVrbeah7sbqQXDR40" /></a>
    <img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1FgHXbj4UpXYtUVrbeah7sbqQXDR40_thumb.gif" border="0" />

Maybe you are looking for

  • Print multiple photos on one page to printer

    I am new to macs, and I can't figure out (using iphoto 11) how to just print multiple photos on one piece of 8 1/2 X 11 paper in my own printer at home. I want to choose the size of each picture (like one 4X6 and two wallets on one page. How do I do

  • Can I use my external hard drive to keep all my music for itunes?

    I am trying to clean up my itunes and computer. Once I figure out how to get rid of all of my duplicate songs I want to keep my entire music library on my external hard drive so my computer has free memory. Is there a way to set this up? Im a novice

  • Dec 2014: update iPad 2, iPhone 4S to 7.1.2 but not to 8.1.2

    Hello, I'm new to this community and a few years as an Apple user. It's now dec 17th 2014. Is it still possible to update several iDevices to iOS 7.1.2, but not to 8.1.2? and if so, how do I go about this? The devices are: - iPad 2 running iOS 6.1.2

  • What is X11, and why does it now appear when I launch a window in Terminal?

    I just upgraded to Leopard from Tiger. I use Terminal to log-in via SSH to my website etc. What is this X11 thing that launches now every time I try to connect via SSH? I never saw this before in Tiger...

  • Acrobat 8.1 and Office 2007/2010 Professional

    I have a user stating she can't create PDF's from within Acrobat 8.1 Professional. When she selects Create pdf -> From File and selects a word document from her desktop, it gives her the following message: "Unable to open document...Please check to s