Is it possible to make a broadband connection in iOS for ipad?

Hi, is it possible to make a broadband connection on iPad using iOS 6.1.3 ?
As I had this problem in my apple devices, I searched a lot and finally I found out how to make a broadband connection like what what we do on widows 7 or windows 8 on Mac OS X mountain Lion, but I still can't make it on iPad, I just want to know if it's possible.
Thanks.

For example, in the university where I study in order to use wi-Fi you are given a user name and a pass word first you connect to the Wi-Fi but you won't have access to the Internet if you just try to connect to the Wi-Fi after that you have to connect to the broadband you've made in your PC with that username and password, this is what I mean. Of course I have used Wi-Fi this way on windows and Mac but not in iOS.

Similar Messages

Is it possible to make Multiple Broadband connecti...

Hi
I have been using BT broadband for some years using a BT Homehub 1.5.
My Freesat box is plugged in to my Homehub, so that I can reliably get BBC iPlayer on the main household TV, so I am unable to move the hub to improve wireless reception elsewhere in the house.
The wireless connection in most of the house is OK, but in one room the reliability is poor and often signal strength shows as low. There is a phone line in this room and I was wondering whether it is possible to make a connection to this line using either a separate modem (Speedtouch 330), or a second hub.
If this is a possible solution then the computer connected to the new modem would affectively be a wired connection, leaving the wireless option still available to the homehub. Both the new modem and the homehub would need to be able to access my BT Broadband account.
If this is technically not possible I seem to have options of using an ethernet connection from the 'poor reception' room to my hub (not really practical as the house has solid floors and routing the cable would be a nightmare), or perhaps upgrading my hub (and wireless dongle) to a later version. Any advice would be very welcome.
thanks
MalcDu
Solved!
Go to Solution.

MalcDu wrote:
Hi,
this looks good.
Would it be worth upgrading the hub and dongles at the same time or is this overkill
MalcDu
No, I would strongly advise that you keep using the home hub 1.5, as in my opinion, the version 1.0 and 1.5 are the most stable of the home hubs, and do not have some of the problems of the later versions.
If you want to add extra wireless coverage, then an additional wireless access point is the best option, connected to the far end of the powerline adapters.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Is possible to make Serializable a Connection object?

Hi I would like to know if is possible to make Serializable a Connection Object, I would like to save the Connection object into a text file so other class can read it and execute a proper query. If is possible how can I do it?.
Thanks.

Actually, if a class isn't already Serializable, you can't make it become Serializable reliably. Consider the following case:
class A
    int x = 0;
    public void setX(int new_x) { x = new_x; }
    public int getX() { return x; }
class B extends A implements Serializable
    int y = 0;
    public void setY(int new_y) { y = new_y; }
    public int getY() { return y; }
public static void main(String arg[]) throws Exception
    B b = new B();
    b.setX(10);
    b.setY(12);
    someObjectOutputStream.writeObject(b);
}The problem with this is that the implementation of Serializable by class B does not affect class A. In the above example, the ObjectInputStream that obtains the instance of B will have a y value of 12, but an x value of 0 (not 10).
Thus, unless the Connection object implemented Serializable to begin with, it can't become Serializable. And, as the above post has described, the implementers of the Connection object would not make it Serializable as the local Connection object uses underlying O/S resources which cannot simply be transformed into a byte array.

Is it possible to use an iPhone as a controller for iPad (for games).

Is it possible to use an iPhone as a controller for iPad?
And if so what apps are supported.
And will gta 3, vice city, San Andreas and dead trigger 2 work with it.

The only game I know of that does this is "The Incident" - it's not a built-in iOS feature. The developers of that game specifically have allowed it.
http://bigbucketsoftware.com/theincident/

How To make/configure Broadband connection in Sun java desktop system

Hi all,
I am using sun java desktop system Release 3 solaris 10 version in my sun ultra workstation. I have a problem with it. I can not make broadband connection , in it. so pls let me know how can i make broadband connection with my ADSL modem ?
Thanks
Partha

Try this:
Log into a termina as rootl. (Select failsafe terminal or command login)
To get the name of your network interface driver, type:
/usr/sbin/ifconfig -a You'll see something like this:
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 129.156.226.245 netmask ffffff00 broadcast 129.156.226.255
In my case it is hme0 so I create a file called /etc/dhcp.hme0:
touch /etc/dhcp.hme0If you want to set a hostname, put it in a file called /etc/hostname.hme0 for example:
rm /etc/hostname.hme0
echo myhostname > /etc/hostname.hme0Most broadband providers preconfigure ADSL modems to default to DHCP so if you do this, connect the ultra 10 to the broadband modem and reboot, the ultra 10 should pick up an IP address and be connected to the internet.

Is possible to make SMS templates natively in iOS?

I am looking for solution - is somehow possible to make Text message template? For fast accessibility i prefer other solution than notes and text shortcuts. Thanks for answers.

No, not within the context of the Messages app. Its possible there is an app in the app store that would provide this, but considering the limitations of SMS, I seriously doubt it. You could consider setting up keyboard short cuts (Settings App > General > Keyboards). Not sure this would give you what you need, but might be worth a look.

How do I make a media placeholder in numbers for iPad/iCloud

How do I make a media placeholder in numbers for the iPad/iCloud
also can I format the placeholder reduce the pixels of the imported
image.

I've only seen this particular function in the Mac / desktop version of iWork. As far as I know, images / media are not resized by placeholders, only masked. Once placed, the images can be double-clicked / double-tapped and then scaled to the appropriate size within the mask.

Invalid security certificate error when connecting from office for iPad

Hi,
I have Alfresco Community running on my NAS including the SharePoint protocol support and can access it from any desktop Microsoft Office application but when I try to "Add a Place" in any of the Microsoft Office for iPad apps I get the following
error message: "Cannot Connect to Site - The site doesn't have a valid security certificate." followed by "Cannot connect to Server - The server may be unavailable. Check your internet connection and try again".
I have the following configuration
- Qnap NAS with QTS 4.1.3
- JRE 8.6.0
- Tomcat 7.0.50
- Alfresco 5.0.c with Share and SPP installed
- Tomcat, Alfresco and Share configured for SSL on 8443 using a self-signed certificate
- SPP configured for SSL on 7070
- iPad Air 2, iOS 8.2 and latest office apps
- CA and server certificate installed on the desktop computers and the iPad
Share and SPP can be reached on the respective ports and I get the websites as expected. And as mentioned desktop MS office applications can access Alfresco via SPP. But I cannot get it to work with the iPad office apps.
Can anybody help with this, please? I know I am not running SharePoint but I assume the problem with the iPad office app is the same?
Thanks
Peter

1. I can't say if it is sequential or not, I have never seen a message like that myself when doing add-on update checks - but I have seen other messages, like the update server not using a secure HTTPS address after that became a requirement for updates. <br />
Plus, I have never used anything from Conduit - ''the founder of that company has a shady past with different internet companies puling all dorts of "stuff", IMO. And all Conduit add-ons were removed and banned from the official add-ons website a few years ago because of their "antics" and major user uproar at the time - just recently have we seen a few return''.
2. Right-click individual addons and use ''Visit Homepage''' to see if that feature is being used as intended and where it takes you. Or use '''Find Update''' and see if that triggers that message, to discover which extensions are fro Conduit.
3. IMO, you are better off updating each extension one at a time with '''Find Update''', as I mentioned above.

When is Apple will make a Micro USB Flash Drive for iPads and iPhones ???

IIt's really a big help if Apple make their own Micro USB a Flash Drive for iPads and iPhones.

Apple would not tell people there are other brands on the market. It is my opinion that if Apple users keep asking for the USB for ipads, they might consider it. As for the iphone there MIGHT be a tiny slot inside where the battery is for an SD card, which expands the space. I know Android has that feature in their cell phones, but not sure about Apple.

Is it possible to make a screen control appear only for a specific patch?

I use MainStage almost exclusively for guitar. Frequently I will use different guitar amps in different patches (usually the AmpliTube plugin, but occasionally Amp Designer). I'd like to use different screen controls for specific patches. For example, I might be using a Marshall JCM900 amp model for one patch, and a Vox AC-30 Top Boost amp model for a different patch. The Marshall has a gain control, and a master volume, but the AC-30 only has a master volume. Conversely, the AC-30 has a top cut control that doesn't exist on the Marshall.
Is there a way to hide the screen control for the Marshall gain on a patch that uses an AC-30 model?
It seems like there would be many, may scenarios where controls that are relevant to one patch would be undesirable with a different patch, but it seems like screen controls are global for an entire concert. Sure, a given control can be mapped to different parameters in different patches (but you can't give a screen control different names in different patches), but there's limited space on a layout, and it seems wasteful to have to provide a given screen control that might only be relevant for one patch out of a dozen in a given set or concert visible in every single patch.

Hi
Standard Screen Controls will always appear in Edit Mod and in Perform Mode for a given Concert. Controls that are not assigned to any parameter will be grayed out in Performance Mode. To do this, select the control in Edit, and choose "None" in the Screen Control Inspector.
Smart Controls adapt for a particular Patch. Different layouts can be assigned per patch.
ericmurphysf wrote:
you can't give a screen control different names in different patches)
That depends on the method you used to name them in the first place:
Controls can have different formats of labelling ( done in Layout mode), where they can show the particular parameter name etc etc. These can change from patch to patch.
You can assign a "Hardware Label" that is global.
Separate Text labels can have global or Set/Patch labels, and they can be labelled for a single Patch by overriding any higher level labelling
hth
CCT

I installed the new iOS for iPad and iPhone now I can't connect to wifi

I installed the new iOS6 and when I try to connect to wifi it directs me to a non-active link on apple.com and doesn't let me go anywhere from there.

go to settings>Safari>Turn on Private Browsing
make sure to close all browers.
Connect to your wifi
then you can turn off private browsing if you want.

How do I make a new album in iPhoto for iPad?

Maybe I'm missing something obvious but I can't figure out how to make a new album or event in iPhoto. Is there a key somewhere?

Yes You can if you are updated with IOS5.
Here is the method...
1-Tap on "Photos" on home screen
2-Tap on camera roll (may be you are already in camera roll)
3-Look at top right, you will found one arrow point out of the rectangle, tap on that
4-It will show "Select Items" now select as many pictures you want to select...
5-Look at the top right corner, you will see "Add to" tap on that
6-Add new album
7-Enter the title for new Album
8-tap on save
9-you are done...

Is it possible to only stream music to a iOS device (iPad, iPhone) without it being downloaded?

I Want to only stream my music to my devices as I don't want it downloaded and taking up space.

Not possible. Music played is automatically downloaded to a temporary cache.
Jim

Is it possible to add multiple contacts to Safari autocomplete for iPads used by more than one person regularly?

If there are multiple regular users who both want to take advantage of the Safari autocomplete function for forms can you add multiple people in Settings?

No, that's not possible.

HT201274 when are Apple going to supply a fix to connect to the for iPads using IOS 8

Cannot connect to the internet or icloud since downloading IOS 8

TThanks for that. Had to connect to another wifi source, connect to iCloud, turn off find my iPad. Did a reset and then reconnect to my usual wifi source. The reset worked I hope.
why do Apple not check potential problems through before issuing upgrades , as system only failed when I upgrad to IOS 8

Is it possible to make a broadband connection in iOS for ipad?

Similar Messages

Maybe you are looking for