Is it possible to make a CD/DVD cover from exisitng Mac OSX software?

Is it possible to make a CD/DVD cover from existing Mac OSX software?

Depends on what you mean by cover and how elaborate you want it to be.
You could likely create one in TextEdit, but it wouldn't be simple.
I can't think of anything else bundled with the OS that would do that.
There isn't anything "purpose-made" for that task.

Similar Messages

Is it possible to make chapters in DVD studio pro?

Is it possible to make chapters in DVD studio pro? If so, how? If not, what program can i use?

Click in the timeline above the track and you will see the upside down purple triangle which is the marker

Is it possible to burn a SD DVD correctly from an Encore CS6 Blu-ray project and content?

Hi all,
I shot and edited AVCHD 1080i30 (60i) square pixel video from a Sony NXCAM HXR-NX5U camcorder in Premiere CS6. I then exported the 1920x1080 edited mpeg2 blu-ray m2v file for import into Encore Cs6. Burning a blu-ray disc in Encore CS6 from this mpeg2 bluray m2v file is no problem and look great even with the default settings.
However, I also want to burn a standard DVD using the same HD Encore CS6 project without having to go back to Premiere CS6 and output a 710x480 mpeg-dvd file. I thought i could simply select the dvd format under the build tab in Encore thinking Encore would handle all the necessary conversions to burn a 720x480 DVD but the menus look jaggy and the video does not play smoothly.
Is it possible to burn a standard DVD correctly from an Encore CS6 HD project and content, or is it better to have Premiere CS6 output a 720x480 mpeg-dvd file and create a new standard 720x480 dvd Encore project instead?
Acording to Encore Help, it says "You can build the same project to DVD and Blu‑ray formats no matter which format you select in the New Project or Project Settings dialog box. Encore makes the appropriate adjustments to transcode the elements to the correct format.", but i'm not convinced Encore is doing things correctly.
Thanks.

Jim,
I tried a variation on your suggestion.
I exported a new m2v file using the mpeg-dvd from Premiere CS6 as you suggested with "Use Maximum Render Quality" checked to get better scaling from HD to SD. I imported it into my Blu-ray EncoreCS6 project by using the "Replace Asset" option and changed the "Project Settings" authoring Mode to "DVD" leaving the HD menu's "Aspect Ratio" at 16:9. I then built the disc using the "Build" tab DVD format and output settings.
It worked!
The jaggies are gone (except for some motion jaggies) and the DVD plays well.
I suppose I could have done something similar within Encore but I'll test that some other time.

HT204380 i have a mac book pro and a i-pad 2. both of the devices have the same apple id and same mailing adress. if i want to make a face-time call from my mac book to i-pad 2. how can i do that?

i have a mac book pro and a i-pad 2. both of the devices have the same apple id and same mailing adress. if i want to make a face-time call from my mac book to i-pad 2. how can i do that?

You have to add another email address on one of the two devices that you can use as the "You can be reached for FaceTime at" contact address and then remove/uncheck the Apple ID email address as the contact address on that device. The way you are currently setup is like to trying to call yourself on your on phone - from your own phone.
Using the iPad as the example go to Settings>FaceTime>You can be reached for FaceTime at>Add another email address. Then add a working email address in the next window. Apple will verify the email. Go to the inbox of that email account, read and respond to Apple's email in order to complete the verification process.
Go back to Settings>FaceTime>Uncheck the Apple ID email address and make sure that the new email address is checked/selected (you will see it being verified again) and that new email address will be your contact address for the iPad.

I am trying to burn a dvd. I created it on Imovie shared it to Idvd and am trying to burn it on a memorex dvd-r from my mac os x laptop. Each time it attempts to bunr and then ejects it early. Usually near the end. Please help.

I am trying to burn a dvd. I created it on Imovie shared it to Idvd and am trying to burn it on a memorex dvd-r from my mac os x laptop. Each time it attempts to bunr and then ejects it early. Usually near the end. Please help.

You will get better results if you use the Share ➙ Media Browser menu option and then drag the movie from the Movies pane of the Media Browser in iDVD onto the menu window.
Also I suggest you use this workflow which I learned from Bengt:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Is there a dvd that recognize a dvd burner on a windows pc in order to burn a dvd directly from my mac to pc ?

Hi the question is in the title, i need to know if there is a software that allow me to burn a dvd from my my mac to a dvd burner located on a windows 7 PC ?
I have avi files on my mac and i want a software for my mac that allow me to burn these avi files directly from my mac to a DVD burner in a PC.
For info my mac recognise the PC DVD, i a m able to read from my mac a dvd located in the pc dvd, but now i need a mac burning software thar recognize this PC dvd burner.
tks

You don't need third party software..
Create a folder in your Finder. Drag the .avi files to the folder. From the menu bar click File > Burn "folder" to Disc...

My MBP read DVD/CD but NOT Mac osX installation DVD (tiger or Leopard)

Hi,
I read a lot of discussion but I didn't find the same problem.
So I have a MBP 15", 2.16Ghz intel core duo, and 2 Go RAM.
I have the 10.5.8 version installed, and I want to erase the disk and do a re-install of 10.5 because I've got some bugs :
- my MBP starts really slowly (about 15min),
- it bugs when I suspend the activity (black screen, nothing works... I have to push the "ON" button a longtime to stop the mac, )
- and other ponctual bugs.
The problem is that my MBP don't read the installation DVD (leopard or even Tiger).
It reads the DVD, I heard that the DVD turns, but after 3/4 try, the MBP ejects the DVD.
But It reads Blank CD, DVD (many zone)... Only the installation DVD is not reading.
I've already try :
-to begin in safemode (with SHIFT button => it is not ok)
- to push "C" key" at the restart (it's not ok, the MBP eject before blue screen.. it seems that the MBP is waiting to eject the install DVD to start)
- to create an other account (not ok)
- to restart the V/P RAM 5 times (not ok)
So, Is there a solution ? If the Mac can read sometimes CD or movie DVD, that mean that the otpical drive isn't broken...
I'm waiting your help
(sorry if there's some english mistakes !)

So, I've tried to start in target disc mod with a firewire.... Not lucky, I can read in the "information System" that my firewire is not recognized. It's weird because I can charge my ipod with firewire, but the target mode doesn't work !!!
message in french :
Bus FireWire :
Attention : Impossible de répertorier les périphériques FireWire.
(average Translate = impossible to index firewire's peripherals)
Do you have some solutions... I still not re-install MAC OSX... and I haven't an external HD (not in shop too !!)

DVD Transfur from i mac to External HD

I am a new mac user and was loading my DVD's onto the computer via mactheripper. Everything was fine until I tried transfuring them to a 300GB Seagate external that has been OSX formatted. It transfurs a gig or so and then locks up. Any suggestions?

The external HD might be set to Read Only on your eMac. Try this:
If the external HD shows on your desktop, single click the HD to highlight it. From the Finder Menu bar at the top of the screen, click on File, pull down and click on Get Info. At the bottom of window that opens, under Sharing and Permissions, you might see something like:
System: Read & Write
Admin: Read & Write
User X: Read Only
User X being your user account.
Good luck.

Is it possible to transfer a completed iPhoto book from one Mac to another, keeping the entire book structure intact?

I recently went on vacation and decided to use some of the free time to create some books of family photos. I transfered the entire iPhoto library of pictures from my my iMac to a MacBook which had never before been used for photos. The library transferred perfectly with all photos, albums, calendars, books, etc. intact. (Thank you, AirDrop!)
I successfully created and ordered 3 different books of photos on the MacBook. Now I want to transfer just those 3 completed books back to the iMac for archiving. Can I use the "Export" command to do this? If so, should I use JPEG, TIFF, etc?
I realize I could simply transfer the entire library file back from the MacBook back to the iMac, but I'd prefer not to take up all that disc space by having two photo libraries on my hard drive (and I'm chicken to delete the original iMac library).
Thanks in advance for your help.
Bob Baker

Yes you can move the book but not by exporting
The book is just entries in the iPhoto database so the only way to transfer it is ot transfer the entire library it is in - you can make a "mini" library containing only one book to make the transfer easier - see Old Toad's tutorial #9 - http://oldtoadstutorials.net/No._9.html
You also can save a PDF of the book and transfer that but you can not edit pr process it
LN

Disabling cd/dvd rom from I-Mac

Dear friends,
In my office, there are around 50 nos. of mac based pcs.
The systems are getting misused by the users through the external drives.
I have already blocked mass storage devices.
But people are using the cd/dvd rom drives and misuse of the pcs.
Please help me out, i will be grateful to all of you.
Thanks and regards,
Ajit Satapathy,
Sr. IT Engineer,
Kanak TV, BBsr.
Cell: 09178467027.

This link should help you https://discussions.apple.com/message/15074543#15074543

Is it possible to make a homogenious copy

Is it possible to make a SAP homogeneous copy from the backup of Oracle DB on HPUX (64 bit) to Oracle on Windows (32 bit) ?
I am planning to make a sand box system on windows from the database backup of ORACLE/HPUX.
Your reply will be highly appreciated
Al Mamun

Hi,
I'd like to clarify a little.
You <b>cannot </b>restore directly an Oracle backup from HPUX to Windows.
As it is a different OS it is called "Heterogeneus" system copy.
If you want to create a sand box, then ( not knwing your DB version ) you will have to export the data with R3load and import it on the new system.
You can find the guide on
http://service.sap.com/instguides
The exact location depends on the SAP Version.
If you are already on Oracle 10, perhaps you can take a look at the note <a href="http://service.sap.com/sap/support/notes/1003028">1003028: Enhanced support for system copy in BR*Tools</a> as it explain a method to use transportable tablespaces for the heterogeneus system copy.

Creating DVD Chapters from within DVD studio Pro

Hey,
Is this possible? Can we create DVD chapters from within DVD Studio Pro?
Chris

Yes, you can add chapter markers in the DVDSP timeline, although they are not frame accurate as they are in FCP. You'll typically get them within about half a second as they can only sit on a 'GOP' boundary, and these occur roughly every 15 frames equivalent.
To add a marker you move the playhead to where you want it and type the 'm' key, pretty much as in FCP.
The chapter marker then defines the start of a chapter for playback. You can manipulate the navigation such that only one chapter plays before you go back to the menu, or you can start at a marker and continue onwards. You can even create lists of markers that are not in track order and have playback jump about between them, although it's not always wise to do so!

Can someone tell me how to make my screen full size with Safari ? I am using a Mac osx 10.6.8.

Can someone tell me how to make my screen full size on my Mac OSX 10.6.8. using safari. I know this is a simple question. I have always had it on full screen and recently had it worked on remotely and now I can't get the screen back to full size. I appreciate any advise you can offer. Thank you

from the BetterTouchTool blog, older versions can be obtained using these links:
The last 64bit Snow Leopard (10.6 ) version (v 0.939 ) can be downloaded here
<http://bettertouchtool.net/btt0.939.zip>
If you are using an older 32bit Mac you’ll have to use this version: 0.785
<http://bettertouchtool.net/btt0.785.zip>

Is it possible to make a copy of the Leopard install DVD?

Is it possible to make a copy of the Leopard install DVD? If so, is there a special way this has to be done? I just found out that we needed to use the Leopard install DVD to recover a complete backup from Time Machine after a recent hard drive failure. We have the family pack of Leopard, so I would like to keep the original at home and send a copy when my daughter goes off to college in case she needs to recover again. Her machine was originally a Tiger MacBook, so those install disks will not work. If it is not possible to copy the DVD, is there a way to create a bootable utility to do a time machine recovery?

This half-solved my problem. I have had no problems creating a backup copy for my intel based computers, but non-intel based computers are problematic; a G5 powermac tower and a G4 Powerbook. Both with super drives for single density burning. Both have Leopard running, installed from an install disc purchased from Apple. However, neither will mount the copy, but intel based computers will. have burnt/burned with both toast 9 and Disc Utility. Discs won't mount and are "spit out" by the drive.
Power Mac G5 OS X: 10.5.4
Model Identifier: PowerMac7,3
Processor Name: PowerPC G5 (3.0)
Processor Speed: 2 GHz
Number Of CPUs: 2
L2 Cache (per CPU): 512 KB
Memory: 1.5 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.8f7
Any thoughts?
-Jim

Is it Possible to Make a Flash Playable DVD for the iTouch

Is it possible to make the same kind of "virtual" DVD player file in Encore for an iTouch audience that works like the Flash output in Encore?
I am under the impression that the 3G iTouch can play flash files but if that is not correct then I guess my question is no applicable. I just felt that some interactive linking would be possible since the iTouch is equipped with a WiFi connection to the internet. Any thoughts or suggestions?
Thanks!!

John,
You know that Encore has a FLV output that produced a flash file that
behaves exactly as a DVD player with player controls. This is why I felt
that this was possible, the flash file is certainly not a DVD formatted
file.

Is it possible to make a CD/DVD cover from exisitng Mac OSX software?

Similar Messages

Maybe you are looking for