Is it possible to make a forum that has pre-filled text?

I'm wanting to make a forum that has a message already typed out and so that when the user goes to use this forum, all that they have to do is put their name, email and then click submit. is this possible?

I think, you mean "form" and not "forum", right?
Yes, it is possible. Just choose the field and write into it whatever you want.

Similar Messages

Is it possible to make is so that, immediately after I import a new clip into FCP, the file is automatically selected in the Event Library? (Similar to how After Effects and Premiere work).

Is it possible to make is so that, immediately after I import a new clip into FCPX, the file is automatically selected in the Event Library? (Similar to how After Effects and Premiere work). Right now, after I import a new file, I have to then go searching for it amid all the other files in my project. It would be extremely helpful if the file I just imported was already highlighted and selected after import, making it instantly "locatable" and ready to go.

Kryan73 wrote:
… after I import a new file, I have to then go searching for it amid all the other files…
in a perfect world, you do know the recording date, and you simply scroll to that date.
in a very perfect world, all your other imports are already tagged, so just have to create a smart list 'unrated' ...
(I know those messy Events… a friend of mine constantly ignores my advice to check the time/date on his camera; on every battery swap, the cam creates a very erratic timestamp ... his actual recordings are listed as made in "2004" or in "2020" .... )

Is it possible to make a button that adds extra pages?

I'm trying to make a form that consists of three pages. However, I would like to have a button at the bottom of page 2 that can be used to duplicate page 2 as a continuation sheet - including the same button, which could then be used to create a 3rd copy as another continuation sheet if needed, and so on.
I can't think of a way of doing it. Even if I managed to duplicate the page, the new copy would be pre-populated because the fields would have the same names. Therefore I'm now wondering if it's possible to make a button that would effectively unhide entire pages to achieve the same thing. Then I could perhaps create the form with nine copies of page 2, and unhide them one at a time based on use of the button. Again though, I'm not sure that's possible, and even if it is it would be pretty inelegant.
Anyone have any bright ideas or alternative approaches I might not have considered?

It is possible to do using the templates feature. If it needs to work with Reader, the only version that supports it without having to apply usage rights with LiveCycle Reader Extensions ($$$$) is Reader 11, so all of your Reader users would have to update to the latest version.
Templates can be spawned so that the fields are automatically renamed, avoiding the issue you mentioned.

Is it possible to make an app that is like a three way (or more) instant messenger?

so me and my frineds all ways text eachother. but we wanna know what other pople say to each other too. so is there an app that has 3 way instant messaging? is it possible to make one? if i knew how to use xcode and make apps i would get on it, but i dont. so im asking you guys for help.

jtbullet wrote:
app place the pdf when it is compiled?
Assuming the pdf is contained in the application folder when the app is then compiled? Is the pdf contained in the app, or does it get installed somewhere?
Sure, you can create an app that only opens up a PDF. The usual place for that kind of stuff is in the application's bundle, which Xcode will do if you add the PDF to your project.
charlie

Is it possible to make an event that does not have an end time?

I want to make an event that says I have a meeting at 4:30pm. I don't know when they meeting will end, so how do I leave that blank?

Hi Bala, you are right, the user must be able to give discounts to items that can be discounted. Most often the discounts will come from the BP price list and associated special and hierarchic pricing.
As Rakesh suggested, I shall run it by our client if they would want to limit discount ability across the board for their users through General authorizations and perhaps allow for only some users who could override manual discounts to certain limits. Again it pertain to the ability to override manual discounts on top of BP discounts through list for all items for some users only.
Thanks again Bala and Rakesh.
Edited by: Syed Aleem on Jan 11, 2011 1:32 AM

Is it possible to create a bean that will generate (fill up) applet paramet

Hi all,
As a newbie I was asking myself is it possible to create a bean that will fill up applet parameter or directly generate the applet ??
And I can I create it ?
I mean : Having a jsp page that make reference to the bean, the bean shall generatehtml applet parameter values.
Some samples will be welcome or a template.
Thanks in advance
Shamann

Thanks a lot for your reply siv viv,
I've posted this thread because I'm a little bit disappointed with Applet and jsp according to lot of thread about this subject (it seems that communication between applet and jsp is not easy : bug reported).
The basic thing i want to do is to create a dynamic Pie Chart as applet or bean so i need to set applet parameter thanks to variables.
See the http://forums.java.sun.com/thread.jsp?forum=45&thread=80250 this one is putting me in the dark.
regards
Shamann

Is it possible to recover autofill forms that has been removed

I accidentally clicked remove all (instead of remove 1) in the autofill preference.
Now I have many sites that I can't remember the passwords.
Is it possible to recover web form passwords that has been removed from autofill?
Also I couldn't find them in the keychain. Please Help

Also I couldn't find them in the keychain.
Open Keychain Access /Applications/Utilities
Select Passwords on the left.
Use the search field top right corner of the Keychain Access window to find web site addresses
If you want Safari to "remember" a new password for a site, first make sure User names and passwords is selected in Safari / Preferences - Autofill.
Navigate to a site. Enter the user name and password. When prompted, click Yes. That will create a new keychain for that site for you.

How to make a pdf that has a blue clickable link? code in Wd Perfect?

Hello,
I make documents in WordPerfect and publish them to pdfs.
I want to put a clickable link in the pdf.
do I do this in WordPerfect? How?
Your help would be appreciated.
thanks

Acrobat's Link tool permits creating links.
The discussion on using this tool starts with the following page in Acrobat's Help:
http://help.adobe.com/en_US/acrobat/pro/using/WS58a04a822e3e50102bd615109794195ff-7cb8.w.h tml
Good to know --- WP is not supported by Acrobat as WP uses its own process to output PDF.
How to use this is discussed in the WP community support forums that Corel maintains.
A wealth of information there.
Be well...

How do I purchase reader extensions to save a PDF form that has been filled out in Acrobat Reader?

I have just discovered that in order to save a PDF form that has been electronically filled out in Acrobat Reader, that I have to purchase reader extensions to make this possible. I would like to speak to someone about the price and how to purchase.
I cannot find a phone number on your site, so I am hoping to get an answer from Adobe this way.
Thanks,
Chani

Thanks everyone for responding. I should have supplied more information.
I was hired by my client to create PDF forms that can be downloaded from their website, filled out electronically in Acrobat Reader, and then saved (with all the form fields filled in) and emailed.
I was supplied with scanned forms as the base for creating the form fields in Acrobat Pro. These web visitors that will be filling out the forms and emailing them will only have Acrobat Reader, most likely.
I created the forms in Acrobat Pro, and they worked great when I tested them ( in Acrobat Pro) - I could save the form field data. However, my client has come back to me with numerous complaints from their web visitors - they cannot save the form once they have filled it out in Acrobat Reader and keep the data they have entered. Instead, they have to print the form physically, scan it, and email it that way (kind of low tech for the year 2013, and not easy for these people).
So, my end goal is to update these forms in Acrobat Pro so they can be filled out by folks only using Acrobat Reader and saved with the form field data intact. Seems like a no-brainer that Acrobat Pro should have this capability without purchasing additional extensions. However, in my research online, I have found several posts that suggest that purchasing "Reader Extensions" is the only way to enable Acrobat Pro to be able to do this.
Can someone please clarify if I need to buy something to program these forms in Acrobat Pro to enable other people using Acrobat Reader to fill out these forms and save them with the form fields intact?
If I do need to buy something, what is it exactly? How do I find out clear, consise, specific information about buying it/the cost/the licensing? I am a sole owner/employee of a graphic design firm and these forms are for my client, which is a locally-owned regional hospital.
If this needs to move to the LiveCycle forum, fine, but I don't really know what that software is and since I'm only using Acrobat Pro (and the users, Acrobat Reader) I felt this was the appropriate place to post.
Thanks for all of your responses!
Chani

Table that has the hier text names and the corresponding hier ID

Hi,
Would anyone happen to know the table that has the hier name text as it appears from the infoObject level and the corresponding Internal hierarchy ID (unique ID) for data element RSHIEID. I would want ot be bale to match the text name o f the hier to the hier ID.
Thanks
Will

Trying to make it simpler taking the 0material hierarchy note that the 0material has been loaded with 3 different hierarchies:
fields in the H table:
HIEID - 434FLR9O6DX0XXJS3CLIYZODD (Refers to the particular hierarchy as mentioned I have 3 hierarchies loaded to 0Material)
OBJVERS - Active and so on
NODEID - 4 digit internal number of the hierarchy
These are the Keys that identifies the hierarchy uniquely in my case the 1st hierarchy.
Now if you want to find the nodes then based on the example above I will take the hierarchy id ie 434FLR9O6DX0XXJS3CLIYZODD for the field HIEID that would give me all the nodes of this hierarchy
Note: the HIEID for a particular hierarchy can be found from the HEADER info
Thanks,
Raj

Is it possible to make a preset that makes it crop all my images to 5x7 instead of camera crop?

All my templates for printing are made for 5x7 crops. So my cameras are all 4x6 crops and I want to import my images and have LR crop to 5x7. I've tried to save a 'preset' to save 5x7 but it doesn't save that crop? I can save everything else except a default crop.
I know that i can copy and paste those settings after I import, but it would be nice to have all that done when I import to begin with.
Or maybe theres another shortcut to do this?
Thanks for your consideration.
Gary Leif

The Picture Dude wrote:
All my templates for printing are made for 5x7 crops. So my cameras are all 4x6 crops and I want to import my images and have LR crop to 5x7.
The placement of an image into an image cell within a page layout, does not require you to have cropped the image (in Develop) to that same shape exactly. The same image can be used within different page layouts at varying aspect ratios.
Normally an image is scaled to FIT into its image cell without loss. This means that margins are left inside the image cell, outside the image area, wherever the aspect ratios do not match. However, by highlighting a given cell and checking the option to "zoom to FILL", the image is instead zoomed larger until no margins are seen. In effect, this is a second on-the-fly "crop" which only operates inside this page setup. By setting this option for all the image cells (good idea to save your layout as an updated page preset), you remove the need to crop images specially for usage within those.
If your image is (say) 4:3 - then this "print crop" will need to trim off parts of the image, to get it to 7:5 proportion. But the same would equally be true if you used the Develop crop, instead, to get it to that same proportion.
Benefits: you still can show / export the same image for other uses, at its original 4:3 shape - or any other shape - in parallel. You can "slide" the crop of the image to a better composition, right inside its framing window within a given page layout, interactively (if it is a free-form layout, you may need to hold the Ctrl / Command key so as to do that).
Personally, as a rule, I retain my as-shot aspect ratio for general purposes. I treat that as a distinctive property of each image, as I took it. I don't want to affect my careful general-purpose composition, merely because I may have printed it in a certain way. Printing is to some degree a separate matter: one can either present those whole-image compositions centred generously inside a variable-margin region of the page - or force-frame them tightly to a given shape on the page - as the whim strikes. And then save that as a Print Collection for future re-use.
RP

How to make images slideshow that has zoom in/out transition

Hi people,
I have around 30 images that I want to do a slideshow, whereby I show the images one by one, formed a circle, after showing all the images, it zooms out to show a logo.
Any suggestion or tutorial for me? I am very sorry for troubling. This is my 1st time of using Adobe Premiere Pro CS4.
Thanks and Regards,

Welcome to the forum.
As Stanley points out, it appears that you are doing two things: PiP to start, and then animating via Keyframes for the fixed Effects>Motion>Scale, and probably Motion>Position. The "revealing" of the logo can be done by Keyframing various Effects, such as the fixed Effect>Opacity, or perhaps Keyframing an added Effect, such as Blur/Gaussian Blur.
Reading on both "Picture in Picture," and then "Keyframes" will be a great starting point. The concept of Keyframes is a bit abstract at first, but once you get that concept, you will find it so very useful for many things, so the study time will pay big dividends. Most Effects can be Keyframed directly, and a few more, indirectly. Various different Effects can be Keyframed separately, so that many things can happen over time, in a coordinated "dance." The uses and applications are virtually limitless, and provide so much power, plus aesthetic choices.
Good luck, and I would start with Stanley's links, and do as much reading, and exprimenting, as is possible. One great resource is the Adobe Classroom in a Book Premiere CS5, Adobe Press. The author covers Keyframing Effects in great detail, plus PiP. Remember, once you understand Keyframes, you will use them constantly, even for adjusting Audio Volume over time.
Good luck,
Hunt

How do I make a thumbnail that has a gallery inside? And how can I make this gallery have embeded videos from vimeo + Images?

Hello,
I'm pretty new to Muse so I don't know a lot about it, but I researched a lot and didn't find an answer to this question.
I'm trying to make a portfolio website. The website will be a 12 thumbnails. But each thumbnail is one project, not an image.
When you click one of the thumbnails, I want it to be a lightbox that will show embeded videos from vimeo mixed with images.
Ex: A coca-cola projet.
Main page has a thumbnail of a coca cola image. When you click on it, it opens a lightbox with a coca-cola film, when i click to the right arrow, it shows a cocacola poster, then another poster, then another video. (but they are all part of this gallery, that is inside the thumbnail.
Can you guys help me?
Thanks!!!

I don't understand why my thumbnails don't work.
I dragged a composition lightbox inside another one. But I still have the first lightbox there and can't delete.
When I try my wabsite i see this:
But then I click the thumbnail and I see this:
And when I click one of those 3 I see this:
Like it is making a double lightbox.
but it doesn't show the images, it's like the first lightbox is on top of the second one.
How I deal with this? =/

Is it possible to delete a file that has been backed up?

Hi,
Before doing a backup with Time Machine, I forgot to tell it NOT to backup a certain file that is fairly large. Now that the backup is complete, this large file is on my external hard drive and is backed up. But I want to delete this file from the backup----is it possible to do this, or am I stuck with it backed up now?
Thanks!

yes, it's possible. select this file in finder and start TM. click on the "gears" action button in Finder's toolbar and select "delete all backups of this item".

What's the best way to make a DVD that has a slideshow and home movies?

Is is better to make a slideshow on iphoto, then transfer it somehow to imovie, then add my home movies? I'm new to Mac, so I don't want to get too into this project without advice. Is there a way to make a slideshow in imovie and then add my movies?

There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
http://www.lqgraphics.com/software/phototomovie.php
(Other users here use the alternative FotoMagico: http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast, for burning.
You will be pleasantly surprised at how professional the results can be!
To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
http://support.apple.com/kb/HT1089

Is it possible to make a forum that has pre-filled text?

Similar Messages

Maybe you are looking for