Is it possible to make a real 3D path in Motion?

Hi guys,
it's still me...
Now I'm trying to make a real 3d path using the paint stroke.
The problem is the paint points have only 2 parameters (X and Y) and I can paint it only on a 2d plain and not in a 3d world.
I would make something similar to:
http://www.youtube.com/watch?v=GBKAk53tMNM
Is it possible using Motion?
Thanks in advance,
Alessandro

Paint strokes are always on a 2D plane in 3D space, and always in "local 3D" which means they cannon interact with other objects (unless you keep them as 2D).
However, you can animate particle emitters and replicators along a motion path in full 3D space and wrap around objects.

Similar Messages

Possible to make a real-time audio analysis program?

Hi, I was wondering if it is possible to use flash to create a swf file that detects audio levels (or certain frequencies) so that on this event it could trigger a movie clip, or timeline event, if not, does anyone know what could be used to do this?
Thanks!

The tree vi for the above are in these .llb. Thanks
Attachments:
6430 project unedited.llb ‏1267 KB
6487 project.llb ‏221 KB
3390 project.llb ‏2356 KB

Is it possible to make MIRO against multiple documents???

Dear experts ,
Is it possible to make an invoice verification against multiple delivery notes / or multiple POs??
Pls let ma know
Thanks & regards
Anis

HI,
It is possible with Multiple allocation criteria in MIRO, but be sure multiple documents should possess the same vendor in the Purchase orders.
Also it is really not advisable as because after posting if you found or want to rectify an error wrt to a single PO you need to cancel the Invoice document which will result in cancelling the document for the entire PO's listed and after correction you need to repeat the process again which will be a real cumbersome process.
Regards,

Is it possible to make a 2D array (or whatever-dimension) array like..

Is it possible to make a 2D array (or whatever-dimension) array like this...
collumn 1 collumn 2
Emulated Address Real Memory address*
(int) (int *)
+----------------------+----------------------------+
| 0 | 0xA0 | <-- row 1
| 1 | 0xA1 | <-- row 2
| 2 | 0xA2 | <-- row 3
+----------------------+----------------------------+
* A = Address.
is it possible to make an array like that?
if it is, please tell me how to do it...
thanks.
... I'm trying to make an emulator to emulate the simplest memory.

Given your other posts, I'm assuming you mean in C, right?
If so, the answer is yes, but specifically how will depend on a needed clarification of your question. What you present doesn't really need to be a 2 dimensional array, just one: that looks like a simple list of memory addresses, right?
At the simplest you can declare an array with two dimensions `iny myarray[2][3];` but to make the table you put up there you'd only need `int *myarray[3];`
If you also wanted space allocated somewhere that each element of that list pointed to, you could allocate them separately:
int *myarray[3];
myarray[0] = (int *) malloc(sizeof(int));
myarray[1] = (int *) malloc(sizeof(int));
myarray[2] = (int *) malloc(sizeof(int));
Obviously with many entries this should be in a loop. Perhaps not as obviously, why would you not just malloc a larger block of memory to start with?
What is the end goal?
EDIT: actually, upon rereading your question, the mallocs are probably irrelevant. `int *myarray[3]` will get you the array you are looking for. Just realize that until you point those pointers to memory you 'own' you shouldn't assign to or read from them.
Last edited by Trilby (2013-04-19 10:06:31)

Is it possible to make a move in contouring mode with onboard program

I use Labview 7.1.
I have a motion board 7344.
Is it possible to make a move in contouring mode (as in the attached vi) with onboard program and how do that?
Attachments:
Onboard_program.vi ‏79 KB

It's not possible to use the contouring mode in an onboard program like you did it in your example. The reason is that while the program is downloaded the write buffer.flx is NOT executed. Thus it can't download the buffer data stored in your front panel arrays. When you start the onboard program later it doesn't have access to your buffer data on the front panel.
In fact I don't see a real advantage why you would like to run the write buffer.flx in an onboard program. You could configure and download the buffer on the host and then use it in an onboard program.
Best regards,
Jochen Klier
NI-Germany

Is it possible to make an alert message.

Hi,
Anyone knows if it Is possible to make an alert-message that pops up ( f.e as a little window) on a specific day to remember me of something I have to do that day?
Would be handy.
Is this possible with Tiger or is there a third party application that does the trick?
Thanks in advance.

Try a free widget called quikAlert
http://www.apple.com/downloads/dashboard/business/qwikalert.html
Regards
TD

Is it possible to make a copy of the Leopard install DVD?

Is it possible to make a copy of the Leopard install DVD? If so, is there a special way this has to be done? I just found out that we needed to use the Leopard install DVD to recover a complete backup from Time Machine after a recent hard drive failure. We have the family pack of Leopard, so I would like to keep the original at home and send a copy when my daughter goes off to college in case she needs to recover again. Her machine was originally a Tiger MacBook, so those install disks will not work. If it is not possible to copy the DVD, is there a way to create a bootable utility to do a time machine recovery?

This half-solved my problem. I have had no problems creating a backup copy for my intel based computers, but non-intel based computers are problematic; a G5 powermac tower and a G4 Powerbook. Both with super drives for single density burning. Both have Leopard running, installed from an install disc purchased from Apple. However, neither will mount the copy, but intel based computers will. have burnt/burned with both toast 9 and Disc Utility. Discs won't mount and are "spit out" by the drive.
Power Mac G5 OS X: 10.5.4
Model Identifier: PowerMac7,3
Processor Name: PowerPC G5 (3.0)
Processor Speed: 2 GHz
Number Of CPUs: 2
L2 Cache (per CPU): 512 KB
Memory: 1.5 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.8f7
Any thoughts?
-Jim

I am trying to find out if I can change a setting of the calendar in my iPhone. When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change? SS

I am trying to find out if I can change a setting of the calendar in my iPhone.
When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change?

Hello SMEvans32
You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
iCloud: Calendar sharing overview
http://support.apple.com/kb/PH2689
iCloud Setup
http://www.apple.com/icloud/setup/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Top-Level Navigation Bar - Is it possible to make it 3 levels?

Dear Portal Experts,
Could someone please advise if it is possible to make the Top-Level Navigation Bar show more than 2 menu levels? I looked at the document and it said we can only have 1 or 2 levels. But I'm just wondering if there is any way around it. Thanks.

yes you are right .we can set only 1 0r 2 levels but good news is there is a workaround
follow this blog
Tag Libraries: Creating a Hover Menu in SAP NetWeaver Portal
reward points if helpful

Is it possible to make a type cast in TestStand?

I've got the following problem.
I use a receive function which waits for an undefined package. (struct package).
The problem is i can't specify the module with the exaxt package.
Generally in C i define a Pointer and create enough buffer for it. Is it the same in TestStand?
Is it possible to make a type cast?
for example:
i've got these packages
struct packet;
struct data;
the function does not know which structure to receive.
err = receive(buffer,maxlen);
how do i specify the buffer variable?
can i create a type "void" with a String to have enough buffer.
and then to make a type cast, for example "Locals.dataobject = ((data)Locals.buffer)"
any ideas?
thx for help

Unfortunately there is no way to do type-casts in TestStand. What you could do is write a wrapper-dll in C, that has for example two parameters for both possible structs. The dll then takes one of the parameters, does the typecast and passes it on to your original dll.
From TestStand you can pass the struct(or better container in the "TestStand language") you want to use to the accoridng parameter of the wrapper-dll, leaving the other parameter empty or with some default-value.
Hope this helps!
André

Hi, can I move my iTunes library to an external hardrive without having to consolidate it as my prehistoric computer just doesn't have the space even though I have deleted everything possible to make room? Please help :(

Hi, can I move my iTunes library to an external drive without having to consolidate it as my prehistoric computer just doesn't have enough space even though I have deleted everything possible to make room? Please help

Hi, do you know if this works if I then want to move my library to a new computer as that is my main intention bacause my old computer hasn't got enough space for me to add new albums so I want to ditch the computer (its got to be about 100 years old and doesn't seem to cope well with modern technology!!) and start using my laptop for my iTunes. I am at the point now where i'm ready to throw both my computer and iPod out the window!!!! I might point out as well that in trying to clear space on my computer I accidently deleted the Bonjour programme which is aparently needed to use the home share option, oops!!!!
Thanks, Kerry

Is it possible to make two type of partitions onto an external drive?

Hi,
I'm on an intel iMac using Tiger and I know to back up my hard drive I need to choose the GUID partition and Mac OS Extended (Journaled) in order to be able to boot from the partition.
So if I make 4 partitions is it possible to make 3 partitions GUID Mac Extended (Journaled) and then make 1 that is Apple Partition Map? I tried it and I couldn't figure it out using my Tiger Install disk and selecting Disk Utility option.
My sister is using a Powerbook PC G4 also using Tiger and I want to make a bootable copy for her as well but just wondering if this can be done?
S.

Niel,
Thanks, so if I format it all as APM I can either clone OSX 10.4.11 which I have on my internal now. If I do a backup of my intel and Powerbook PC both of those will already have Tiger on them so do I need to do another Tiger install on each of those partitions?
Also by doing it this way I can't boot from a parition onto my intel can I?
Guess I'll have to weigh whose system is more important or just back up her drive as GUID on my computer and she can restore from it if she has too but won't be able to boot from it.
S.

Is it possible to make a partition in Windows 7 and then place OS X on that partition?

My employer just gave me a new MBP 13" with Windows 7 on it. It has bootcamp running, but no option to boot in Mac OS. IT dept. said they deleted Mac OSX Lion due to security concerns (?). In any case, as I travel quite a bit and have and ipad and iphone, I would like to use Mac OSX for personal use and Windows 7 for work.
Is it possible to make a partition in Windows 7 and then place Mac OSX Lion on the partition so that I do not need to reinstall Windows? I know it would be possible to wipe the HDD and then add Mac OS, then bootcamp, then Windows 7, but adding again would get my IT dept involved which would put me back to square one.
Any help would be appreciated!!
JF

Ok let me ask you IF the IT department of your workplace does NOT want OS X installed on "THEIR" (The Companies) computers because of what they think is some type of security issue why are you trying to go against their wishes and install OS X on a computer that is NOT owned by you.
That could cost you your job.
If you continue down this path you will screw up the Windows install and have to take the system back to the IT department to get it fixed. What do you think they will say at that point?
Do as you like but you would be better off just buying your own Mac computer if you are set on using OS X as your personal operating system.

Is it possible to make an album, with seperate, and different artwork for each track? Thanks.

Got a few tracks and I was wondering if its possible to make like an album, but each track different art?

You can give each track its own artwork. iTunes will normally display the artwork of track 1 in album listings. The individual track art will show in the small window at the top of the screen when playing, or the artwork panel of the mini player, or the now playing window on a device. Try it and see.
tt2

Is it possible to make an iCloud account used by everyone in my school?

In my school we have iPads. Would it be possible to make an iCloud account used by everyone for contacts and calendars?

You do not give everyone the username and password of that account. This would be a violation of iCloud terms and conditions.
I've done what you want done with a calendar. You use the iCloud account yourself, then use the 'broadcast' facility to produce a subscription URL that everyone can put into their calendar software. If you make the calendar public anyone can subscribe. They don't even have to know the account name let alone the password.
Log into the account on www.icloud.com and test it out.
Once you have that working you might try the same thing with a contact list. I see no reason it shouldn't work.

Is it possible to make a real 3D path in Motion?

Similar Messages

Maybe you are looking for