Is it possible to make a 'save as' copy of a project?

Is there any way to save a project in FCPX effectively in a ‘Save As’ mode? 
I know there is ‘Duplicate as Snapshot’, but it only protects compound and multicam clips. and most of my projects have only a few compound clips.  None have multicam. 
The other option,‘Duplicate’, only creates a copy of the original, and both change if you make further edits. ( I'm sure I must be missing something, but I can't see when this type of Duplicate might be useful.)

I'm not sure what might be going on. Are you certain that the duplicate project wa the one that was opened – and not the original?
Here is a single event and with a a very simple test project (Original Project) with some text added:
Here is that project duplicated with New Text.
Here is the second duplicated project:
As you can see, the text from the original project was not affected by the revision in Project1. Otherwise, the second duplicate would not have the original text.
BTW, it would not surprise me at all if it turned out there was something amiss with your installation. I have, for example, experienced very unpredictable behavior with the library backup function. So for me it is especially important that this versioning method work reliably.
Russ

Similar Messages

  • Is it possible to make a save folder?

    hi! i just got my iphone and i am using microsoft exchange with my hotmail account! i would like to make a save folder because there are emails that id like to keep!
    thank you for your time

    Create the mailbox on the server with your Hotmail account via webmail access for the account using a browser. All server stored mailboxes should be available automatically when accessing the account with the iPhone's Mail app as an Exchange account.

  • Is it possible to make my serial numbers same as the project automatically

    I would like configure SAP B1 so that when I choose the serial numbers, that serial number also becomes the value of my projct.
    Is this possible?
    Thanks!
    Riza

    Hi,
    Sorry, missed to attach this thread. Check and let me know.
    http://scn.sap.com/thread/3525783
    Thanks & Regards,
    Nagarajan

  • When I save a copy of CC project, the new copy project plays everything really slow

    Hey guys,
    Just saved a copy of my Adobe Premiere CC video project after hours of work.  Then I reopened my project (both the original and copy) and when I played the video back on the timeline, everything is about 24 frames slower.  The music is slower, the voiceover is slower, etc.  And now, even when I copy the sequence and start a new project with it, it's still slower than the original.  Sequence setttings are same as before.  What.  the.  crap? 
    cinemanfilm

    But I am open minded and hopefully the OP will post whatever information he wanted and I will be happy to be proven wrong by the insight that Jim will bring to solving the problem.
    When we see people posting for the first time, it is pretty easy to assume that they didn't start by reading the FAQ pages. Pointing them to information about how to more successfully ask their question doesn't really require more than a one line response in most cases.

  • Make iTunes save artworks in JPEG instead of PNG

    Hey all,
    one little question:
    Is it possible to make iTunes save the artworks as JPEG in the audio file instead of PNG?
    Thanks!

    Clearly they don't have the requirements you do.
    There's nothing wrong with saving JPEGs.  I happen to need them all the time as well, and prior to getting CS5 I always found myself changing the mode to 8 bits, saving as JPEG, then (if I remembered) going back in the history to where the document was 16 bits.
    When I asked about saving PSD files I didn't realize you needed JPEGs for specific purposes.
    -Noel

  • Is it possible to make a homogenious copy

    Is it possible to make a SAP homogeneous copy from the backup of Oracle DB on HPUX (64 bit) to Oracle on Windows (32 bit) ?
    I am planning to make a sand box system on windows from the database backup of ORACLE/HPUX.
    Your reply will be highly appreciated
    Al Mamun

    Hi,
    I'd like to clarify a little.
    You <b>cannot </b>restore directly an Oracle backup from HPUX to Windows.
    As it is a different OS it is called "Heterogeneus" system copy.
    If you want to create a sand box, then ( not knwing your DB version ) you will have to export the data with R3load and import it on the new system.
    You can find the guide on
    http://service.sap.com/instguides
    The exact location depends on the SAP Version.
    If you are already on Oracle 10, perhaps you can take a look at the note <a href="http://service.sap.com/sap/support/notes/1003028">1003028:  Enhanced support for system copy in BR*Tools</a> as it explain a method to use transportable tablespaces for the heterogeneus system copy.

  • Disabling Save A Copy option

    Is it possible to disable the "Save A Copy" option for a pdf document using the security policies in ADC

    Any solution yet?
    Hom
    e
    pa
    g
    e

  • Edit the document without having to save a copy

    At my work we get lots of plans in pdf format, that often need rotating. However, more often than not we get a box saying "This document restricts certain features...." yadda yadda yadda, and makes us save a copy before we can edit it. This is very time consuming. Is there any way to remove this feature or get around it so we can just rotate the damn document without going through all this hassle?
    Thanks

    This message appears when the Extended Reader Rights have been applied to
    the document in Acrobat. You can ask whoever is providing you with them not
    to do it, in order to save you that extra step, but if they do, there's no
    other way around it, I'm afraid. Maybe you could use an Action (if you
    have Acrobat Pro) to save copies of multiple files, so you won't
    have to process them one by one.

  • It's possible to make an adobe air with a php files to save data?

    Hi,
    I would to make a standalone version with Flash Adobe CS3.
    How is it possible to make that? A other question, I have a php file to save the data from the user's answer, how is it possible to integrate this file to the air program?
    Thanks for your answers and sorry for my english.

    If you know where the page is at, I myself don't see any reason why you can't access it.
    The only thing I could think was if Livejournal.com had a lock on the page or if you had to sign-in and your u/n and p/w had expired.
    I'd say go ahead and at least try.
    davewdan

  • Not possible to make full check in email client?

    HI,
    I saw that doesn't exist the possibility to make a "full check - check all" into the email settings. 
    Is nice that the checks can be done individually, but I think will be useful to have a "check all" option, in case that you want to move all emails into another folder for example (supposing that you have hundreds of emails, which is another issue because the email client is not able to save the received messages)

    You can check all in the Hub for emails or text to mark them read or delete, but no option to move all.  Just click an hold on the date and slider appears on the right to Mark all read or delete.

  • Is it possible to hide the save function and only use the save as function in teststand

    Hi,
    When i'm done building a sequence i want to prevent other engineers to save the sequence with the same filename (or version number).
    Is it somehow possible to "hide" the save button and only use the save as function?
    Or is there another possiblity to solve my problem.
    The idea is to have a sequence called Sequence_V1.0.seq which i have build. When installing this in a factory enviroment I would like whenever there is a change needed in the sequence that the version number increases (manual action) (becomes Sequence_V1.1.seq). So from the moment you want to save i would like to only have the function save as. In this way you are obligated to fill in a new sequence name (original sequence will be read-only)
    What would even be great if there could be a log of what the changes were
    Thx!!! 

    1) You could mark the file as read-only, by default you would then not be able to save over it. The user could make it not read-only though if they know what they are doing.
    2) Another possibility is to lock the sequence file for editing (this is a teststand feature). Go to the Sequence File Property dialog, on the advanced tab, where it says Password Protection, set it to Not Editable and give it a good password. This doesn't however keep someone from saving another file to the same name as the locked one, but they at least won't be able to saved the locked file again without your password, nor will they be able to edit it.
    Hope this helps,
    -Doug

  • PR-is it possible to make a pr without entring valuation field?

    Hi all expert,
    i have required one scenarion in purchase rquisition. in our company they want that they make a purhase requisition for issuing a Truck Or ant fleets. and the authorised person could release it.
    but the problem is in purchase requisition w dont want valuation .
    is it possible to make a pr without entring valuation field.
    regards,
    santosh

    First go to SPRO-MM-Purchasing-Purchase Requistion-Define Document types and Identify the Field Selection Screen for Document types.
    Now Using the Same Path go to Define Screen layout at Document level and Change the Field Price & Price Unit as Optional and Save and Try again.
    Regards,
    Ashok

  • Is it possible to make a text box cycle/rotate through text, like a slide show does?

    Is it possible to make a text box cycle through 3 or 4 separate pieces/groups of text, like a slide show does with photos? So that when I open my site a text area says "Statement 1", then 10 seconds later it changes to "Statement 2", then 10 seconds later it chagnes to "Statement 3", etc.
    Its that possible with a text box? My desire is to have 3 or 4 testimonials that change every 10 seconds.
    You can see that right now it's a single testimonial:
    www.kmlstudio.com
    All help is appreciated
    Thanks!
    Kevin

    Right.  Some plugins have zip file downloads while others are just copy & paste.
    In DW, go to File > New > Blank page > JavaScript.
    Copy & paste the Cycle plugin code into your new JS page. 
    SaveAs   cycle.2.9.81.js  in whichever site folder you normally keep scripts.
    Link your HTML page to your new cycle script:
    Insert > Script > Script (browse to folder containing your cycle script). Hit OK.
    Don't forget to add a link to the jQuery core library, too.  Plugins don't work without it.
    Nancy O.

  • Is it possible to make a joltpool ?

    Hi
    Weblogic is started without successful jolt session pool cause of not being
    booted JSL in remote site.
    after a few minutes, JSL process is booted.
    in case of this, without shutdown the weblogic, is it possible to make the
    jolt session pool for JSL in remote site ?
    Does anyone have an idea ?
    I would appreciate it very much.
    Thanks in advance.
    Mr, ko.

    Hi Johan,
    If you are looking to export video through Edge Animate.
    Well, there is no direct way to do it but you could use a screen recorder to make an mp4. Then you can import the mp4 in PS and if you have the plugin for gif then you just save aa a gif.
    Regards,
    Devendra

  • Is it possible to make a .MOV file "un-downloadable"

    Hi there...
    I have a weird question - is it possible to make an online video (.MOV file) "un-downloadable"?
    I work at a college and a professor wants to post some videos within the school's public site. But, because of his concern with copyright, he wants to make it so the videos are impossible to download to the viewers' local machines.
    Is there any type of setting or code that can be put within the .MOV file that would allow this to happen?
    Thank you so much for any feedback you have!
    g4   Mac OS X (10.4.8)  

    Any browser viewed QuickTime file will be "cached" (stored on the viewing computer). This is how browser work (they keep a copy of every page element) to help speed up viewing.
    QuickTime 7 (Mac and PC version) even allows the user to set the size of this cache so movies can be viewed while "off line".
    True "streaming media" (served with special streaming server software) is not cached on the viewing machine so no local copy is made. Streaming Server (QTSS) is free software available from Apple.
    What your school probably really wants is a way to prevent "copies" of your files being used. This is nearly impossible as anyone that views the file could use screen capture software to get a copy. Even the true streaming version.
    I use Snapz Pro.
    You could use some type of "log on" Web page to help limit the audience.
    You could also use "skin track" movies which make screen capture a bit of a chore.
    http://homepage.mac.com/kkirkster/MTV/
    My example will open in QuickTime Player. Even Pro users are prevented from saving or editing the file because it is protected by an AppleScript droplet "Save As Un-Editable" and modified for Tiger and QT 7.
    Hope this helps you decide a plan.

Maybe you are looking for

  • Partial page refresh is not working in APEX 4.0

    Hi All, I have a report region in my application,I have selected the following properties for the region, Pagination scheme - Row ranges X To Y (with next and previous links) Enable partial page refresh - yes Display position - bottom -right Their is

  • How to resize a photo from CameraUI?

    Hi there, i really need som help here. I cant seem understand how to resize an still image taken with the camera. Here are the code so far(also with the upload part). I just need a thumbnail to be uploaded to the server, not the HQ-image. Any ideas?

  • PDF to Word Exporter not working in Acrobat 9 Pro

    On an iMAC 1) Open a PDF file in Abobe Acrobat 9 pro 2) File>Export>Word Document 3) The resulting Word document contains two blank pages, no text What am I doing wrong? Thank you!

  • Need to add push botton in my selection screen

    Hi I am doing a report program . I need to add PUSH BUTTON in my selection screen can u give me any code or suggestions for this. IF i press this push button i should get the basic list. Regards Rasheed.

  • How do i change the default image rulers from cm to pixels?

    Im having an issue with PS CC 2014. I am not able to change the default setting when I create a new image. It is currently set to cm and I would like it in pixels. I have gone to: Photoshop > Preferences > Units & Rulers and changed the settings but