Is it possible to make an image by putting YCbCr(YUV) values to it?

I want to create an image by putting YCbCr(YUV) values on it, any passiblities?

This is your 9th posting on this topic.
Many postings have gone unanswered, probably because nobody knows what you are talking about. Asking the same question over and over again will not help you get an answer.
In some postings you have received sample code or links to tutorials or other resources.
Not once have you bothered to reply to any of the 9 postings.
So I'm not going to waste my time attempting to help when you have absolutely no respect for those that have made an attempt to help.
I suggest you learn how to use Google, I doubt you will get much help from other regular members of the forum.

Similar Messages

  • If Possible to make a Image from

    Hello
    I have a doubt, Well I have a System where Exist a Server a three station of Work, Two PC (Station Work) are Ultra 5 (Very Old)
    The Idea is to change these computer by Ultra 80 Station (Because we have this type of machine in my Store)
    Is possible to make a Image of the disk of the Ultra 5 and copy this information to Ultra 80?
    If this is possible, I would Like to help me,
    Regard
    Andres

    Since the NI-DAQ driver software is multithreaded, a multiprocessor system would have enhanced performance over a single processor system. Either way, you can have multiple handshaking digital I/O cards in a system for high speed acquisition, granted you have enough operating system resources (DMA, IRQ) for the cards.
    You can find more information about this by going to the http://www.ni.com/support page and searching All Technical Resources for the keyword "multiprocessor". You will find an excellent NI Developer Zone presentation, as well as tutorials and other technical documents.
    Geneva L.
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • [SOLVED]possible to make live image of a current running arch system?

    Hi Friends!!!. Is it possible to make live iso image of a current running arch system? are there any tools available for that?(I want to do this cause When i install a new arch system, I want to remain my own customizations intact)
    Last edited by Pranavg1890 (2012-10-14 07:29:58)

    OK, so after reading the posts, I think that this is not possible.but i think this sould be feature which should be researched upon cause everytime I install arch on a new machine(arch reinstalls on same machine are very rare cause it's a rolling release and has excellent recovery tools) I have to spend a 5-6 hours of time configuring the system.so, i think it should be a feauture that should be worked upon.for eg. like you could chroot into the iso created and then replace the deafult configs by the one on your system or a system scanner which scans the changes on the system with respect  to default arch installation and make the necessary changes to the live image.Thanks friends for your replies. I mark this thread as solved.

  • Is it possible to make an image of a MBP, and run it as a virtual machine?

    Is it possible to create an image of an exitsting MBP, transfer the image to another system or server, and run that image as a virtual machine?  If so, how?
    Thank you

    Mac OS X will not run in a virtual machine, except as 10.6 Server:
    https://discussions.apple.com/docs/DOC-6841

  • Possible to make 4 image group Responsive?

    So in the new Muse update, you can turn single objects in 100%-Width/responsive elements. Is there a way to do the same thing with multiple images? Like a little collage? I'm looking for a similar effect as the header at polygon.com.
    here's an example of how 100% width responsive items look.
    http://i.imgur.com/XY8jEvO.jpg
    Here's a mock up of what I'm looking to have it do (each color represents a photo that I hope would expand together, like the singular image expands edge to edge).
    http://i.imgur.com/XY8jEvO.jpg
    Has anyone figured out a way to do this? Maybe a 3rd party widget? Or a way to drop in some code?
    Thanks!
    CBG

    Thanks for the response Mac_heibu that's what I was thinking too as a way
    to kind of fudge it. But then the issue making the individual rollover
    states respond similarly.

  • Is it possible to make a movie from sequence of images in JMF?

    I am in need of make a movie from image sequences created from YCbCr(YUV) values. Is it possible to make a movie from sequence of images in JMF?

    yes, it is.
    at www.java.sun.com in the JMF session there are several examples about your problem!
    cheers
    thomas

  • How do you make an Image from a Graphics?

    1) Is it possible to make an Image from a graphics?
    I've returned the Graphics of an image in the method of one class so that I can work with it in another class. I was looking for a setGraphics in the Image class but there isn't one. Nor is there a graphics.createImage(). What I'd really like to do is get the background image, draw on it in a separate class, then return it to the original class (for buffering purposes).
    2) is there any way to make a blank Image of given dimensions (without actually making a .gif of a blank screen)? I want to draw on the background even if it is blank, but I can't get the Graphics of a null Image.
    thanks in advance.. :-) jen

    thanks for all your help guys!
    i looked at those websites.
    The reason why the site's buffered images work is becuase they are using the paint method in a single class. (i.e. they are not calling the graphics from someplace else). If you call a Graphics (using getGraphics and the like) from someplace else, you don't get a reference or pointer; you get a COPY. The copy will helpfully record your instructions. But the original graphics doesn't get the instructions. That's my problem. My graphics instructions are not getting sent to the originating Graphics, so drawRect never gets executed.
    Another problem is that I often have no background picture in my container, and hence, I have a null pointer when I try to draw stuff on the returned Graphics.
    So what I want to do is create an image in the subclass of the rectangles, lines, whatever, and send it to my handy little setBackground(Image im) method in my superclass. And whenever the background image is null, create a white image to draw on.
    I am calling the graphics from the background of a custom lightweight container. I would REALLY REALLY not like to mess with my container code... it took me a long time to get it working.
    I also don't want to override paint. That would make all the buffering work I did obsolete. :-(

  • Make a image file

    it is possible to make a image file with thee thing i've done in a jPanel (like .gif, .jpeg or others)???
    if not with a JPanel but with other component or the applet enterily, please said it
    thx for help
    scuse with my english

    What are you trying to capture? The whole panel with components or just a Graphics pallete?

  • I would like to be able to size images by kilobytes instead of pixels--is this possible?  I use I-Contact which requires a maximum of 70kb per image.  For best quality I want to make the images as close to 70 as possible.  Currently I choose a size of 300

    I would like to be able to size images by kilobytes instead of pixels--is this possible?  I use I-Contact which requires a maximum of 70kb per image.  For best quality I want to make the images as close to 70 as possible.  Currently I choose a size of 300 pixels on the shortest side but sometimes this gives me an image of slightly greater than 70kb and sometimes the image is just 30-40kb.  Is there a way to be more precise in reaching but not exceeding 70 kb?

    That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
    You can opnly resize using the available options and file size is not one of them
    LN

  • Is is possible to have the images as thumbnails and make it so you can click on them for a larger view and then click them again to have it go back to the original size? In an interactive pdf?

    I am designing an interactive catalog in a pdf. Is it possible to have the images as a thumbnail and then click them to enlarge the image and then click again to make them go back to the original size?
    Thank you in advance!
    Stephanie

    It can be done with Show/Hide buttons:
    Here's a button created from a small version of the image (notice that it's selected in the image below):
    The small button has a Show/Hide Buttons and Forms action. It's action is to make the Larger Image visible (eyeball turned on) with the small image hidden (eyeball turned off).
    The large image is also turned into a button (shown below):
    Notice the checkbox "Hidden Until Triggered". The large button is hidden until it's triggered by the small button. Clicking on the large image also causes a Show/Hide action which shows the Small button and hides the large button.

  • Is it possible to make a reflection of an image that will change with the image? [was: Reflection]

    Is it possible to make a reflection of an image that will change with the image?

    normfb wrote:
    I believe that a Smart Object will solve your problem.
    place your original image in a new file as a smart object and do the same for the reflection (made by Transforming, reducing the opacity and introducing a mild horizontal motion blur) on its own layer, then:
    by double clicking on the smart object in the layers panel and returning to the original image, any change you make in the original and save, will automatically update the upright image and its reflection.
    Nice one Norm.  Five Kudos points to you.

  • Is it possible to make the background of an image transparent in indesign?

    is it possible to make the background of an image transparent in indesign?

    It's not necessarily the best way, but depending on the image content, you might be able to get an acceptable result with the options under Object > Clipping Path...
    EDIT: So technically, the answer to your question is: No, but you can apply a clipping path to hide the background.
    Also, again depending on the image content, as well as the underlying content, it might be possible to use blend modes in the Effects panel to render the background transparent.
    Background removal is best done in Photoshop, where the image can then be saved as .PSD and its native transparency will be honored when placed in InDesign.

  • How Do You Make an Image Flow with the Text?

    Hello all,
    I am using CS4 InDesign on Windows Vista. I am fairly new to Indesign but try to do my research and homework well before asking what I hope is not a really dumb question.
    I am writing a book of approx. 350 pages that is an illustrated encyclopedia of 156 plants and their oils.
    Each 2 page spread is a single entry for a plant. The graphics frames on each spread are identical in size, position and styles for a consistent look throughout the document.As you can see (hopefully) each page is a single column. See screenshot below
    In order to overcome my first problem of positioning and sizing the graphics frames uniformly, I created the master pages with the graphics placeholders sized, positioned and formatted to my liking. This worked wonderfully and I placed all of my 300+ graphics by simply over riding each frame.
    Then in my editing I decided to add another 2 page spread somewhere in the middle of this fairly large document.
    What a NIGHTMARE. The text predictably shifted but now ALL of my graphics were no longer associated with the corresponding text! Arrrgghhh.I had not anticipated this behavior (used MS Word for 15 years) or I would have done something different.
    3 hours later I finished re -"placing" the images associated with the correct text.
    I researched the help file and found out about the neccessity of anchoring graphics to text. I have read through the threads in this forum, followed links to "indesignsecrets.com/make-an-image-flow-with-the-text" and " Working with anchored objects by Anne Marie Concepcion"
    My concerns are this.
    An inline graphic places the graphic back onto your text layer for some reason ( Previously my graphics each had their own layer)
    Not wanting to start (again) from scratch with my graphics I converted them to inline/custom anchored objects.
    But to select then cut then paste every pre existing graphic to anchor it inline seems to be cumbersome and counter intuitive although the top smaller graphic did position well and the text seemed to wrap ok.
    When I placed the larger bottom graphic on the left facing page using custom positioning I was not able to get the text to wrap at all.( The in line anchoring did not seem to allow for positioning on anything but the 'Y' axis).
    It seems that there would be a simpler way to place text and graphics where you want them and have them associate and flow together (or not) when you want them to and have text wrap easily around an anchored object without keyboard gymnastics. It would seem that the concept of a certain graphic being associated or linked with certain text would not be an unusual concept in desktop publishing.
    Am I missing something?
    Can you place an anchored graphics frame on the master page with your desired options?
    How would this be done if possible?
    Is there any other way (i.e grouping) to keep graphics associated with the desired text so that it flows together if extra pages are added?
    Is the fact that my graphics frames are on my master pages responsible for my text wrap difficulty? (I have text wrap enabled on my master pages)
    Are there any settings, redundant or otherwise, I need to be aware of?
    Thank you in advance for any suggestions or directions
    L.N.

    Hello Again,
    Thank You Bob but I am still a little fuzzy on this. I have already created object styles for the graphics frames. For instance the small graphic underneath the heading (Its a drop of oil) has an object style applied. Now I checked and it has the anchored object options checked in the style dialog box. When I reapply the style to the next similar graphics nothing happens. It is still not anchored. Do I need to create a new style based on "nothing" add my effects plus the anchoring options? Basically start over. If thats what I need to do thats OK. As to your instruction that object styles could accomodate this anchoring thing...thats what I thought too but somehow I can't get it to work. See object style dialog box screenshot below:
    For the larger graphic on the bottom of the left facing page. I still cannot get any text to wrap. In the screenshot example the text describing this particular plant doesn't go to the bottom of the page so the wrapping issue on this page is moot. However I have some entries where the body of the description is more involved and does go to the bottom of the page and the text WOULD need to wrap around the plant (larger ) graphic.
    Hi there Harb, Yes I found out early on that object styles can't apply size (that would be on my wish list for sure) That is why I found that creating my graphics frames on the master page with the correct size, effects and positioning tickled me so much. Can you believe I originally went through and MANUALLY resized and repositioned each and every 300+ graphics in this book but it still wasn't right. I'm nothing if not persistent. (Now if I could just get my grown sons to pick up their socks!)
    Anyway the master page graphics frames idea would be perfect if I could get the images to anchor in their respective spots on the master page as well.
    For your second suggestion. I am not clear about why I would need to break the threads of each spread so that each spread is a seperate article. Is the threading issue the thing that is causing my text to move on leaving their associated graphics behind? If so how do I go about doing this?
    So to recap:
    1. I need to know if I can modify my object style or recreate from scratch with the anchoring option (as I said it didn't work)
    2. Can't get text to wrap around the Custom anchored graphic at bottom of page at all
    3. Im not clear on the breaking the threading on the spreads
    I am willing to go back through and start from scratch (new master pages, styles etc ) if neccesary. This book is the culmination of 7 years of research and artwork.Basically the project is DONE. Now if I can just format it correctly.
    I can't thank you both enough for your time, suggestions, expertise and patience.
    Thanks again
    LN

  • Is it possible to use an image as the "base" of a mapviewer?

    Hi,
    I am trying to use a jpg image as the "base" of a mapviewer. After Insert the image, I create a "georaster theme" for it. Then, I create a "base map" by using the georaster theme created in the previous step. Up till now, both "georaster theme" and "base map" can be preview normally. After that, I create a "title layer" by using the "base map" which I created. However, only a write rectangle shown up when I preview the "title layer".
    So, I wonder it is possible to make a map by using an image as it base? If yes, would you mind telling me how to make it done. And, what value should I input for the following parameter:
    a) When I import an image in mapbuilder:
    1) Top X coordinate , Top Y coordinate
    2) X resolution, Y resolution
    b) When I make a title layer:
    1) Max X , Min X, Max Y, Min Y
    2) Zoom in scale (Once I zoom in the image, the image is gone?? It's very strange)
    Here's the property of that image:
    Dimension = 288 * 175
    Width = 288 pixels
    Height = 175 pixels
    Horizontal resolution = 72 dpi
    Vertical resolution = 72 dpi

    iMacs late 2009 or newer can be used in Target display
    mode.  Any older, no can do.
    The only other way is via network Screen Sharing or
    some otherVPN network like solution.  The issue here
    though is that video performance will be pretty severely
    hampered.

  • DVD burned on one G4 will not open up on another. How to make an image?

    Hello,
    This is a bit of a desperate problem, I have a dvd that was created of a 1.4 hour program and burned using iDVD3.0.1 on a G4 500 Mhz machine. Once the dvd is created I am able to play it on that computer using dvd player. I am running Tiger on that machine.
    Once I take that dvd over to my G4 1GHz machine also running tiger, the machine will simply not accept the dvd and keep ejecting the dvd; dvd player does not even open up in order for me to look at the video.
    The main purpose of me having to look at the dvd on the G4 1Ghz machine is to copy the dvd. Can you also briefly describe how to make a copy of a video dvd created using iDVD? I believe I have to make an image first. I cannot remember how to do that, please help. Once the image is made how do I copy that image onto a fresh dvd?
    Thanks,
    Vidur

    Hi Vidor
    first:
    I use DVD-R disks
    And Verbatim brand
    second
    iDVD 3.xx doesn't create Disk Images. Neither does iDVD 4
    (if iDVD prior HD/5 You have to add a hack to make this possibly
    named HPfurz and install it)
    Works on iDVD 4 - for iDVD 3 I don't know.
    Test this with Apple DVD-player - OK then burn it with iDVD
    or Toast if You have and don’t want to re-code the movie.
    third
    To make a DVD copy You need
    - a NON copy protected DVD
    - a program that can make it into a Disk Image eg. Roxio Toast™ (costs)
    - a new blanc DVD-R disk
    If Apple Disk Util tool - can make a disk image is out of my knowledg.
    Yours Bengt W

Maybe you are looking for