Is it possible to make an item not have any discount at all?

This is the situation - A customer wants to turn off the ability for all users to give any discount for certain items. Rest of the items may have discounts based upon BP discount or any other price hierarchy discount. Users can also override this discount during order creation. But discount should be possible only if the item master data says the item is discountable.
Is this possible please? Is there such a field on Item master data to turn off discounts altogether? If not any other suggestions to achieve the above.
Thanks.

Hi Bala, you are right, the user must be able to give discounts to items that can be discounted. Most often the discounts will come from the BP price list and associated special and hierarchic pricing.
As Rakesh suggested, I shall run it by our client if they would want to limit discount ability across the board for their users through General authorizations and perhaps allow for only some users who could override manual discounts to certain limits. Again it pertain to the ability to override manual discounts on top of BP discounts through list for all items for some users only.
Thanks again Bala and Rakesh.
Edited by: Syed Aleem on Jan 11, 2011 1:32 AM

Similar Messages

  • I do not have any sounds at all.

    I do not have any sounds at all. All volumes are turned up. No rings, no vibrations and card games have no sound.

    Make sure the side switch (above volume buttons) is not set to mute.
    Make sure Do Not Disturb is off (Swipe up from the bottom of the screen to access Control Center and make sure the moon icon is not lit)
    Try a Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

  • My pad does not have any sounds at all

    Please . My ipad does not have any sounds at all .. I dont know what to do
    I shut it off while there was music playing and when i turned it back on , there was no more sounds completely

    There's a little button by the volume rocker switch that's a dual purpose button. It's an all mute or a rotation lock. Could you have flipped that button by mistake?

  • HT1430 hi there 2 days  ago i tried to restaure my Iphone 3gs on someone else laptop and ever since my phone is not working.It turn on but I do not have any reception at all.I tried to reset it through Itune but nothing same working.

    My phone is not working

    So you are not using Photo Stream? If you are, then you can turn on Photo Stream on iCloud on your Mac, and then go to iPhoto or Aperture and the Photo Stream will show under "Web" in the sidebar.
    You can also set up your iPhoto or Aperture preferences to automatically import your Photo Stream, so any photos you take with your iPhone camera will upload and import automatically and will show under events, broken into monthly groupings.
    Photo Stream does not use any of your iCloud storage.
    Here are the Preference Screens I'm referring to:
    iPhoto:
    Aperture:
    One other thing concerning your Touch Screen. Have you tried resetting your device (nothing will be lost) to see if that will get your Touch Screen working again: Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays see if your Touch Screen is working.
    Best of luck,
    GB
    Message was edited by: gail from maine

  • Is it possible to make comments or notes on a read only pdf document?

    Is it possible to make comments or notes on a read only pdf document?  Thank you.

    With Preview you can use the annotations feature.   There's a free  application, Skim, that is designed for annotating and making notes on PDFs. 
    OT

  • Possible to make an item editable for certain users and read only for other

    Is it possible to make an item editable for certain users and read only for others?
    I've been able to accomplish this by taken the select statement that I used to define an authorization scheme, placing it in the Read Only condition of the item. However, I would like to simply reference the authorization scheme to utilize caching, and to help keep things cleaner for future maintenance.
    Is it possible to reference an authorization scheme in an item condition similar to the way another item can be referenced by preceding it with a colon (i.e. :P1_First_Name)?

    Thank you, your suggestion worked.
    It would be nice on a future release of APEX if a drop-down box existed under the Ready Only section that would allow an existing Authorization Scheme to be selected or negated when applying the Read Only attribute to a form item.

  • Order does not have any selectable item .

    Hi Experts ,
                              I am trying direct production scenario where I have assembly with SPK 50 and ( PT : E) . I have converted planned order for header material and automatically prod order is created for assembly also  . For assembly I procured material and after MIGO ( GR ) stock is updated .  But while doing Goods receipt in MB1A ( MT 261 ) for assembly production order system showed message order does not have any selectable item .
    I confirmed the assembly order but stock is not reducing ( No goods issue happed for assembly ) .
    I guess, in direct production we need not to do goods issue for header material ( or higher assembly ) but what about the lower most assembly ? I think we have to do goods issue for lower assembly ( that is procured raw materials ) .
    Regards
    Neal .

    Hi Neal,
    I Hope ur using collective order concept, 
    In a collective order, goods movements (GI & GR) are usually not required for assemblies that are directly produced.
    When u do the confirmation for Lower level order, Produed assemblies will be issued to Higher level order directly, so manual goods issue  not possible for   assemblies to Higher level order.
    U can confirm this, with Higher level order cost analysis after the confirmation of loer level order.
    So need not issue the produced assembly to higher level order using the MB1A.
    Only thing u have to activate  Collective order with goods movements  cjech box for Order type at OPJH .                     
    For Lower level  order  (Assembly order ) good issue for   procured components of assembly  can be done using MB1A with MVt type 261.
    I hope this will clear ur doubt if yes , Reward and close.

  • Distribution Point creation failed. possible cause : distribution manager does not have the sufficient access right to the computer

    Hi All,
    I had this really disturbing experience with
    SCCM 2012 SP1.
    OD : 2008r2 Enterprise 64bit 
    Possible cause: Distribution Manager does not have sufficient rights to the computer.
    Solution: Verify that the site server computer account is administrator of the computer.
    in Distmgr.log says :
    DPConnection::Disconnect: Revert to self
    SMS_DISTRIBUTION_MANAGER 5/26/2014 7:34:30 AM
    16280 (0x3F98)
    DPConnection::Connect: For ["Display=\\PNGBRANCHSERVER.xxx\"]MSWNET:["SMS_SITE=SSM"]\\PNGBRANCHSERVER.xxx\, logged-on as ssm\sccmadmin
    SMS_DISTRIBUTION_MANAGER 5/26/2014 7:34:30 AM
    16280 (0x3F98)
    DPConnection::Connect: For ["Display=\\PNGBRANCHSERVER.xxx\"]MSWNET:["SMS_SITE=SSM"]\\PNGBRANCHSERVER.x\, logged-on as ssm\sccmadmin
    SMS_DISTRIBUxxx ON_MANAGER 5/26/2014 7:34:30 AM
    16280 (0x3F98)
    Failed to find a valid drive on the distribution point ["Display=\\PNGBRANCHSERVER.xxx"]MSWNET:["SMS_SITE=SSM"]\\PNGBRANCHSERVER.ssm.com.myx
    DPConnection::Disconnect: Revert to selfxxx
    MS_DISTRIBUTION_MANAGER 5/26/2014 7:34:30 AM
    16280 (0x3F98)
    DPConnection::Disconnect: Revert to self SMS_DISTRIBUTION_MANAGER
    5/26/2014 7:34:30 AM 16280 (0x3F98)
     GetContentLibLocation() failed SMS_DISTRIBUTION_MANAGER
    5/26/2014 7:34:30 AM 16280 (0x3F98)
    Failed to get the content library path on server PNGBRANCHSERVER.  SMS_DISTRIBUTION_MANAGER
    5/26/2014 7:34:30 AM 16280 (0x3F98)
    Failed to install DP files on the remote DP. Error code = 16389
    SMS_DISTRIBUTION_MANAGER 5/26/2014 7:34:30 AM
    16280 (0x3F98)
    STATMSG: ID=2370 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCMSVR. SITE=SSM PID=2660 TID=16280 GMTDATE=Sun May 25 23:34:30.428 2014 ISTR0="["Display=\\PNGBRANCHSERVER.ssm.com.my\"]MSWNET:["SMS_SITE=SSM"]\\PNGBRANCHSERVER.\"
    ISTR1="PNGBRANCHSERVER.S" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\PNGBRANCHSERVER.\"]MSWNET:["SMS_SITE=SSM"]\\PNGBRANCHSERVER.ssm.com.my\"
    SMS_DISTRIBUTION_MANAGER 5/26/2014 7:34:30 AM
    16280 (0x3F98)
    I have tried many of the solution provided unfortunately nothing positive happened.
    Appreciate your input before engaging premier support.
    Thank you

    Hi,
    NO_SMS_ON_DRIVE.SMS
    This file is used to prevent Configuration Manager from installing binaries to a volume. By default, when you install System Center 2012 Configuration Manager on a remote Site System, the SMS Site Component Manager Service installs the binaries (files and
    folders) for the Site System on the NTFS-formatted volume that contains the most free space. You may want to use an NTFS volume other than the default volume for your remote Site Systems by preventing ConfigMgr from enumerating certain NTFS volumes.
    In order to prevent CM from enumerating an NTFS volume, on the remote server you can create a text file that is named NO_SMS_ON_DRIVE.SMS and put the this file on the root folder of all NTFS volumes where you do not want to install the binaries (SMS folder)
    for the ConfigMgr components.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How do I get a longer list of items in the history window - and not have to click "Show All History"? The default list is too short.

    How do I get a longer list of items in the history window - and not have to click "Show All History"? The default list is too short.

    Well I figured it out… all you do say show commands :-/

  • Is it possible to make a fillable form have variable fields - so if you select a radio button it triggers a different form field to be seen depending on which radio button is selected??

    Is it possible to make a fillable form have variable fields - so if you select a radio button it triggers a different form field to be seen depending on which radio button is selected??

    Yes, one needs to use some custom JavaScript code to control the other fields' properties.
    Disabling (graying-out) Form Fields by Thom Parker

  • Resizing a TIFF File: Overwriting TIFFFields does not have any effect

    Hi,
    I have some TIFF files that I am receiving through a FAX server. Some of the TIFF files have an image length of *1077 pixels and a DPI of 200x98*. These images open fine in generic viewers like Microsoft Image Viewer and IrfanView and the image size in the information dialog shows up fine (1752x2158). But when I open the images in a LeadTools viewer (that works off TIFF Header tags), the image appears stretched out.
    I am trying to re-sample the image to make it a true Letter size image (1700x2200) with resolution of 200x200. I have been able to set the TAG_X_RESOLUTION and TAG_Y_RESOLUTION which I can see changed in the Tag Viewer. But changing the following tags does not have any effect on the resulting image:
    TAG_IMAGE_WIDTH
    TAG_IMAGE_LENGTH
    TAG_ROWS_PER_STRIP
    the following is the code I am using, I have tried all possible ways (removing TIFFFeilds and then adding them), but it has no effect. The last options is to use a Print Driver from within Java and Print the image (that re-samples it into a 8.5x11 inch image with 200 DPI). At this point, I am just curious about writing TIFFFields with images. Any ideas are appreciated:
    Thanks,
    Manuj
    +
    import java.io.BufferedOutputStream;
    import java.io.File;
    import java.io.FileInputStream;
    import java.io.FileOutputStream;
    import java.util.Iterator;
    import javax.imageio.IIOImage;
    import javax.imageio.ImageIO;
    import javax.imageio.ImageReader;
    import javax.imageio.ImageWriter;
    import javax.imageio.metadata.IIOMetadata;
    import javax.imageio.stream.ImageInputStream;
    import javax.imageio.stream.ImageOutputStream;
    import org.w3c.dom.NamedNodeMap;
    import org.w3c.dom.Node;
    import com.sun.media.imageio.plugins.tiff.BaselineTIFFTagSet;
    import com.sun.media.imageio.plugins.tiff.TIFFDirectory;
    import com.sun.media.imageio.plugins.tiff.TIFFField;
    import com.sun.media.imageio.plugins.tiff.TIFFImageWriteParam;
    import com.sun.media.imageio.plugins.tiff.TIFFTag;
    import com.sun.media.imageioimpl.plugins.tiff.TIFFT6Compressor;
                   //set the input stream for to the reader
                   tiffFileReader.setInput(tiffFileInputStream);     
                   //define the writer
                   ImageWriter tiffWriter = (ImageWriter) ImageIO.getImageWritersByMIMEType("image/tiff").next();
                   //define the writer param with compression;
                   TIFFImageWriteParam writeParam = (TIFFImageWriteParam)tiffWriter.getDefaultWriteParam();
                   TIFFT6Compressor compressor = new TIFFT6Compressor();
                   writeParam.setCompressionMode(TIFFImageWriteParam.MODE_EXPLICIT);
                   writeParam.setCompressionType(compressor.getCompressionType());
                   writeParam.setTIFFCompressor(compressor);
                   writeParam.setCompressionQuality(Float.parseFloat("1"));
    // get the metaData
                   IIOMetadata imageMetadata = null;
                   IIOImage testImage = null;
                   for(int i=0;i<filePageCount;i++)
                        imageMetadata = tiffFileReader.getImageMetadata(i);
                        TIFFDirectory dir = TIFFDirectory.createFromMetadata(imageMetadata);
              // Get {X,Y}Resolution tags.
              BaselineTIFFTagSet base = BaselineTIFFTagSet.getInstance();
              TIFFTag tagXRes = base.getTag(BaselineTIFFTagSet.TAG_X_RESOLUTION);
              TIFFTag tagYRes = base.getTag(BaselineTIFFTagSet.TAG_Y_RESOLUTION);
              TIFFTag tagImageWidth = base.getTag(BaselineTIFFTagSet.TAG_IMAGE_WIDTH);
    TIFFTag tagImageLength = base.getTag(BaselineTIFFTagSet.TAG_IMAGE_LENGTH);
              TIFFTag tagRowsPerStrip = base.getTag(BaselineTIFFTagSet.TAG_ROWS_PER_STRIP);
              TIFFField fieldRowsPerStrip = new TIFFField(tagRowsPerStrip, TIFFTag.TIFF_SHORT, 1, (Object)new char[]{2200});
              // Create {X,Y}Resolution fields.
              TIFFField fieldXRes = new TIFFField(tagXRes, TIFFTag.TIFF_RATIONAL,1, new long[][] {{200, 1}});
              TIFFField fieldYRes = new TIFFField(tagYRes, TIFFTag.TIFF_RATIONAL,1, new long[][] {{200, 1}});
              // Create Width/Height fields.
              TIFFField fieldImageWidth = new TIFFField(tagImageWidth,TIFFTag.TIFF_SHORT,1, (Object)new char[]{1728});
              TIFFField fieldImageLength = new TIFFField(tagImageLength, TIFFTag.TIFF_SHORT,1, (Object)new char[]{2200});
              //TIFFTag imageLengthTag = fieldImageLength.getTag();
              // Append {X,Y}Resolution fields to directory.
              dir.addTIFFField(fieldXRes);
              dir.addTIFFField(fieldYRes);
              //add Image Length and height parameters
              dir.addTIFFField(fieldImageWidth);
              dir.addTIFFField(fieldImageLength);
              // dir.removeTIFFField(278);
              dir.addTIFFField(fieldRowsPerStrip);
    testImage = new IIOImage(tiffFileReader.read(i), null, dir.getAsMetadata());
    +
    The resulting image with this carries the updated DPI values (200x200) but still carries the old values of 1752x1077, the length being exactly half of what Irfan view is showing.
    Edited by: Manuj on Nov 2, 2010 10:48 AM

    Your problem for some reason sounds familiar.
    EDIT
    Ok, now I remember. Your post is like this one in the old forums,
    http://forums.sun.com/thread.jspa?forumID=540&threadID=5425983
    Basically, for viewing purposes Irfanview scales the image's height by 2 and changes the dpi to *200x196*. It does this to achieve a 'square' pixel. The image that appears on screen now looks roughly how a printer would print it. However, the image data is still the same squished 1752x1077 image.

  • Webcenter - You do not have any New Start Menus

    After importing a site, admin interface of MySites show 'You do not have any New Start Menu'.
    I tried to enable all assests:
    MySites's admin interface --> admin tab's --> All Sites --> MySites --> this shows only default limited assets, not all of them so I can enable them.
    Even import shows success msg with logging of all assets.

    Hi,
    If you are concerned about missing asset types, i.e. you do not see certain asset type(s) in the list of asset types to be enabled, then I would suggest to re-import resources=@ASSET_TYPE:* to your site in question.
    If you are concerned about missing startmenu items, see if you can find them in Admin tab > Start Menu > New/Search/New Insite/etc...
    If the start menus are there, you will just need to modify the startmenu items and enable them for your site. Alternately, you may also disable and re-enable the corresponding asset type(s), which will ask if you want to enable some existing start menu items for the current site.
    If the start menus are not there, I would suggest to re-import resources=@STARTMENU:* to your sites in question.
    NOTE: Before re-importing anything from the existing CSDT workspace, you should make sure the resources you are trying to import were correctly exported and exist in your workspace.
    Thanks,
    Yu-Chun

  • I want to add Narration to my movies. I've watched the Elements Guided Help for Narration. But when I click the RECORD Tab, I get an error message. "Your current audio hardware selection does not have any inout channels." My question, therefore: Do I need

    I want to add Narration to my movies. I've watched the Elements Guided Help for Narration, and closely followed their procedure. But when I click the RECORD tab, I get an error message. "Your current audio hardware selection dos not have any input channels." My question, therefore: Do I need to buy an external microphone? I have an HP Pavilion Laptop, running WIndows 8.1. I thought I had a built-in microphone. But ,maybe not. Please help. Also, WHAT KIND of microphone - exactly - should I buy? Thanks for your help.
    Mike Moore
    Corvallis, Oregon

    mikem
    Go to Edit Menu/Preferences/Audio Hardware and ASIO tab and click on it.
    Under the Input tab, make sure that you have your microphone selected.
    Please let us know the outcome.
    Thank you.
    ATR

  • Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all

    Hello,
    I have an issue configuring a simple File Adapter Content Conversion, it will be great to give me some support as I'am new in the PO Environment.
    Iam reading a flat file and trying to write into an XML in the same FTP server
    I have a 1 to 1 Mapping as follows
    And my Content Conversion at Sender side Looks like this
    After running the configuration Iam getting following error message
    Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all
    My System is the SAP Netweaver Process Intgration 7.4 single Java stack
    Do you have any idea how to fix this issue?
    Many thanks in advance
    Khadim

    Hi evrybody
    I have enabled the tracing of ICO and have seen that my payload for the message mapping is ok,.
    <ns:hartgeldbest_ERP_KT xmlns:ns="http://xxxxxx.de">
    <Recordset>      
    <header> 
         <gesellschaft>03</gesellschaft> 
         <filiale>000</filiale>
         <satzart>11</satzart>
         <datum>00000000</datum>
         <kennzeichen>1</kennzeichen>
    </header>
    </Recordset>
    </ns:hartgeldbest_ERP_KT>
    The issue is on detrmining the RECEIVER in the Main-XML
    <sap:Main xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3"versionMinor="1" SOAP:mustUnderstand="1">
    <sap:MessageClass>ApplicationMessage</sap:MessageClass> 
    <sap:ProcessingMode>asynchronous</sap:ProcessingMode>
    <sap:MessageId>ae41678e-da87-11e3-cd0f-0000006831a2</sap:MessageId>
    <sap:TimeSent>2014-05-13T10:16:43Z</sap:TimeSent>
    <sap:Sender> 
    <sap:Party agency="http://sap.com/xi/XI" scheme="XIParty"/> 
    <sap:Service>CC_Hartgeldbest_File2Idoc</sap:Service>
    </sap:Sender>
    <sap:Receiver> 
    <sap:Party agency="" scheme=""/> 
    <sap:Service/>
    </sap:Receiver>
    <sap:Interface namespace="http://xxxxx.de">hartgeldbest_KT_async_out</sap:Interface>
    </sap:Main>
    Is it possible that the receiver is overwritten due to the Content Conversion? Because if I set my Message Protocol to "File" the receiver determination will work.
    Any idea?
    Thx
    Khadim

  • I cant open many website with firefox, there say filter not let open this site, but when i open they with internet explorer not have any problem.

    i cant open many website with firefox, there say filter not let open this site, but when i open they with internet explorer not have any problem.

    Could you post an example of the filter message?
    This article has more information on the filters built in to Firefox: [http://www.mozilla.org/en-US/firefox/phishing-protection/ Firefox Phishing and Malware Protection].
    It's possible that you also have a Firefox add-on, or external software, that is filtering what you see. However, we don't have enough information to help identify it yet. If you want to review a list of your add-ons, you can find them under: Help > Troubleshooting Information.

Maybe you are looking for