Is it possible to make an object to always face the camera (in 3d)?

I have an animation with a camera flying through a map in 3D.
Is it possible to make all my texts layers automatically "face" the camera, no matter what movement the camera makes in 3d?
Thanks in advance,
Morimitsu Yamauchi

Sure, just use the Basic Motion > Point At behavior and make the camera the target. You'll need to tweak the settings a bit.

Similar Messages

  • Hello, i created 5 different books (photo album) and i would like to know if it's possible to make one single order (and pay the transportation fees only once...) i couldn't find how

    hello, i created 5 different books (photo album) and i would like to know if it's possible to make one single order (and pay the transportation fees only once...) i couldn't find how

    Soory, no, it is not possible. You can only combine multiple copies of the same book into one order.
    Regards
    Léonie

  • I am trying to copy a document and I keep getting the error "Can't paste the objects. The requested transformation would make some objects fall completely off the drawing area."

    I am trying to make duplicate documents with minor adjustments to each and when I try to copy the artwork from one document and paste it into the new document I keep getting the error "Can't paste the objects. The requested transformation would make some objects fall completely off the drawing area." Both documents are exactly the same size, res, color format etc. I even tried to drag and drop and get the same error message. Anyone know what I can do to resolve this issue?

    Try scaling the view size down to 6% or so and then do a Select All. See if there are objects off the artboard which may be causing this error. Most often you will see this if there were guides dragged from a ruler which were selected by dragging the white arrow and then deleted. This leaves the anchor points at the edge of the work area.

  • Is it possible to make a composite picture using Faces.  e.g. for a family xmas card ?  If so, how is it done ?

              Is it possible to make a composite picture using "Faces" for example on a family Xmas or other Greetings card ?
                   Eric

    Afraid not.
    You can make composite images with a Photo Editor and use that.
    In order of price here are some suggestions:
    Seashore (free)
    The Gimp (free)
    Graphic Coverter ($45 approx)
    Acorn ($50 approx)
    Pixelmator ($50 approx)
    Photoshop Elements ($75 approx)
    There are many, many other options. Search on MacUpdate.
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

  • Is it possible to make a slideshow or presentation without the fading (and horizontal l and vertical) so no transition at all?

    Is it possible to make a slideshow or presentation without the fading (and horizontal l and vertical) so no transition at all?
    (I would like my dog to 'run' more smoothly across the webpage in a very quick slideshow)

    Hi,
    You can set the transition to any of the three options available (fade, vertical and horizontal ) and set the transition speed to  "0" . This would remove all sorts of transition effects from your slideshow.
    Please refer to this screenshot :- http://prntscr.com/4rdaqm
    Hope this helps
    Regards,
    Rohit Nair

  • Since downloading iOS 7, I have been having trouble purchasing music from iTunes Store. When ever I try to make a purchase I always get the message "Your account    is not valid in the US  store"

    Since downloading iOS 7, I have been having trouble purchasing music from iTunes Store. When ever I try to make a purchase I always get the message "Your account    is not valid in the US  store" As I am new at this I don't know what I can do to remove this problem.

    What country are you in ? If you aren't in the US and the address on your account isn't in the US then try going to the bottom of the Featured tab in the App Store app on your iPad and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select your country.

  • If you have a video in camera roll on the ipod touch is it only videos taken with the actual ipod or is it possible to transfer videos from your computer to the camera roll?

    If you have a video in camera roll on the ipod touch is it only videos taken with the actual ipod or is it possible to transfer videos from your computer to the camera roll? The ipod touch was bought in feb. 2011

    You can transfer videos from your computer to the iPod Touch, but not to the Camera Roll.
    The Camera Roll is for temporary storage only - for photos/videos captured by the iPod Touch and for photos saved from a received email or from a website. Photos/videos in the Camera Roll can and should be imported by your computer as with any other digital camera.

  • My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

    My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

    If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help.  If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
    The black dot problem may mean you need to reset your iPod.  If that does not help, it may need service by an Apple Authorized Service Provider.
    If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
      http://www.apple.com/support/ipodtouch/
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • How to make an object getting out of the screen ?

    Hello everybody !
    I am creating a game introduction with Flash pro CS6 and here's is my problem.
    I want a object in my animation to leave the screen, but I dont know how to do it.
    Is there for example, a way to delimited the working area, so that when I make an object go out of this area, it does not appear in my final animation ( no matter the format, .avi, .mov, spritesheets ... ) or can eventualy be "cut" ( if I make my object half inside the working arear and half outside ) ?
    Is there an other way to do this ?
    Thanks !

    Using a mask might be one way.

  • Is it Possible to Make a Flash Playable DVD for the iTouch

    Is it possible to make the same kind of "virtual" DVD player file in Encore for an iTouch audience that works like the Flash output in Encore?
    I am under the impression that the 3G iTouch can play flash files but if that is not correct then I guess my question is no applicable.  I just felt that some interactive linking would be possible since the iTouch is equipped with a WiFi connection to the internet.  Any thoughts or suggestions?
    Thanks!!

    John,
    You know that Encore has a FLV output that produced a flash file that
    behaves exactly as a DVD player with player controls.  This is why I felt
    that this was possible, the flash file is certainly not a DVD formatted
    file.

  • Is it Possible to Make an Object Dissappear in a Shot?

    Hey Everyone...
    I am finishing a short film and happened to notice one minor issue. In one of my master shots, I can see a light that should not be in the shot. Unfortunately, it cannot be wire framed out.
    I know this is a crazy question, but is there any possible way to somehow color out the object and replace it with what's behind it (a white wall). It's a very minor issue that most likely I will only notice, but it is enough to drive me crazy and on the big screen, I'm afraid it could be an issue, etc.
    This will be an easy shot to reshoot, but if there is a way I can fix it in post (and learn something new)..I am all for it.

    but I am wondering if it is possible to keep the actors head in front of the object, if this is too much of a pain, then I am going to just reshoot this one shot. < </div>
    Piece of cake if you understand rotoscoping. A monstrous disaster if you don't have the patience, skills, or tolerance for the imperfect result of rotoscoping without the services of a professional rotoscoper.
    This is added to your OP and both posts carry the same "might as well reshoot" implication.
    Yes. Reshoot it.
    bogiesan

  • Is it possible to make an object/colour that will not print but still be visible on screen once saved as a PDF?

    I want to show stuff in a PDF that will automatically not 'print' from Illustrator.
    For example create a colour to make shapes and text that you can read from the saved PDF but will not print once the PDF is printed out
    Thanks

    from illustrator you could put stuff on a template layer (check 'Template' in layer options), but then it would only be visible on the illustrator side; opened in Acrobat the layer would be invisible.
    you could do it from Acrobat Pro though. have 'Create Acrobat layers from top-level layers' checked in the PDF save options, then open in Acrobat and look in the layer properties (this is from Acrobat Pro 9):

  • Please help. New CS 4 error: can't move the objects. the requested transformation would make some objects fall completely off the drawing area.

    I know this is not a "new" error message, but I have never gotten it on any previous version of Illustrator. I just upgraded to CS 4 and now get it on virtually every file when I try to nudge an object in any direction. Not that it should matter, but these are files that were created in earlier versions of Illustrator and I never had this problem. I have followed instructions from similar posts to no avail. I have zoomed way out to the edge of the art board: there are no hidden layers, objects, or guidelines, no lingering points from erased guidelines, or objects of any sort anywhere near the edge of the art board (which, I know, is enormous compared to the size of my working 11 x 17 document.)
    What am I missing?
    Also, on occasion, when I CAN nudge an object (usually a JPG or PDF image that I placed in the document), the image just disappears. I think it is still "there" though I cannot see it. Any suggestions?

    I am nudging it by selecting the object and hitting the up, down, or side arrows. Dragging with the mouse works fine, but does not give me the precision I'm looking for. Dragging with the mouse also avoids the "disappearing PDF/JPG" problem.
    I don't know what plug-ins I have. Possibly none.
    I don't use clipping masks. But I did select one object (and then ultimately selected all objects) and went to clipping mask, the "release" function was not active, so I am assuming there are no clipping masks in the document.
    I did attempt to select stray points, nada.
    I have not tried getting rid of the settings folder. Not sure how to do that?
    Also not sure how to take a screen shot to show you. I can tell you that there is only one layer and it is a very simple document with just a JPG image, a few objects and some text.
    Sorry! I hope this helps you help me, I normally just use a few simple tools to produce some basic documents.

  • Is it possible to make only one page landscape while the rest are portrait?

    Hi,
    I have a long Pages document with everything in portrait view, but I want just one page to be in landscape. Is it possible to do this?
    Thanks

    Rotating the page contents is completely different than rotating a page.
    Using the A4 format, a landscape page may display a rectangle whose width is 297 mm, height is 210 mm.
    A rotated object in a portrait page is restricted to a width of 210 mm.
    On these two screenshots, the text boxes in page 2 are containing the same piece of text.
    Compare the true landscape one to the the portrait one rotated of 90°
    or
    compare the true portrait one to the the landscape one rotated of 90°.
    They are completely different.
    This is why I will continue to write that we can't use two pages orientation in a single document !

  • Is it possible to make my serial numbers same as the project automatically

    I would like configure SAP B1 so that when I choose the serial numbers, that serial number also becomes the value of my projct.
    Is this possible?
    Thanks!
    Riza

    Hi,
    Sorry, missed to attach this thread. Check and let me know.
    http://scn.sap.com/thread/3525783
    Thanks & Regards,
    Nagarajan

Maybe you are looking for