Is it possible to make crop presets in A3?

I use 1x2 crop often and have to enter it every time

Cool tips. Thx. Very much like the idea of making output-specific Folders & Albums, and of using "Album picks". (Though I wish there were some way to move the circle-badge off the image.)

Similar Messages

Is it possible to make a preset that makes it crop all my images to 5x7 instead of camera crop?

All my templates for printing are made for 5x7 crops. So my cameras are all 4x6 crops and I want to import my images and have LR crop to 5x7. I've tried to save a 'preset' to save 5x7 but it doesn't save that crop? I can save everything else except a default crop.
I know that i can copy and paste those settings after I import, but it would be nice to have all that done when I import to begin with.
Or maybe theres another shortcut to do this?
Thanks for your consideration.
Gary Leif

The Picture Dude wrote:
All my templates for printing are made for 5x7 crops. So my cameras are all 4x6 crops and I want to import my images and have LR crop to 5x7.
The placement of an image into an image cell within a page layout, does not require you to have cropped the image (in Develop) to that same shape exactly. The same image can be used within different page layouts at varying aspect ratios.
Normally an image is scaled to FIT into its image cell without loss. This means that margins are left inside the image cell, outside the image area, wherever the aspect ratios do not match. However, by highlighting a given cell and checking the option to "zoom to FILL", the image is instead zoomed larger until no margins are seen. In effect, this is a second on-the-fly "crop" which only operates inside this page setup. By setting this option for all the image cells (good idea to save your layout as an updated page preset), you remove the need to crop images specially for usage within those.
If your image is (say) 4:3 - then this "print crop" will need to trim off parts of the image, to get it to 7:5 proportion. But the same would equally be true if you used the Develop crop, instead, to get it to that same proportion.
Benefits: you still can show / export the same image for other uses, at its original 4:3 shape - or any other shape - in parallel. You can "slide" the crop of the image to a better composition, right inside its framing window within a given page layout, interactively (if it is a free-form layout, you may need to hold the Ctrl / Command key so as to do that).
Personally, as a rule, I retain my as-shot aspect ratio for general purposes. I treat that as a distinctive property of each image, as I took it. I don't want to affect my careful general-purpose composition, merely because I may have printed it in a certain way. Printing is to some degree a separate matter: one can either present those whole-image compositions centred generously inside a variable-margin region of the page - or force-frame them tightly to a given shape on the page - as the whim strikes. And then save that as a Print Collection for future re-use.
RP

Crop Presets

Hi,
I have two questions regarding Crop Presets in the options bar.
Next to the Crop icon in the options bar is a small triangular arrow. When I click this I see a drop down menu with default Crop presets that ships with PS. Next to this is another drop down menu that is labled Unconstrained and it too has Crop presets.
Q#1: Why are there 2 places to make the presets?
Q# 2: How can I export any custom presets I made under the Unconstrained drop down?

Perhaps what I am asking is not possible in the way that I am trying to
use the crop tool.
My original picture as show by Photoshop's rulers is 12 13/16 x 9 10/16
If I send this to a specific printer I want to use, I know that it will be cropped when printed on 8x10
All I want to see is where the crop will occur so i can decide if that is going to be cut off is acceptable and just let it go or I need to do the resizing myself.
i was hoping to use Photoshop's crop tool to help me.
I also tried Lightroom 3, and it does not have an overlay for this either
If I look at the print preview, I can kinda see what is happing but not the same as if I had a full size image.
I ended up simply resizing all the images to fix but it seems frustrating to me that I cannot have an overlay in either Photoshop or Lightroom that will show me where my print will be cut off.

Is it possible to make photos with the Ipod nano 5G?

Is it possible to make photos with the Ipod Nano 5G?

No. But you can take a photo of the video with your Mac.
With the iPod connected to your computer, click on the iPod, open the DCIM folder & move the video file onto your desktop. Play the video & when you get to the part you want to take a picture of, put Quicktime on pause. Take a screen shot (appleshift3) or (appleshift4 for cross hair cropping) of the paused video.

Is it possible to make an alert message.

Hi,
Anyone knows if it Is possible to make an alert-message that pops up ( f.e as a little window) on a specific day to remember me of something I have to do that day?
Would be handy.
Is this possible with Tiger or is there a third party application that does the trick?
Thanks in advance.

Try a free widget called quikAlert
http://www.apple.com/downloads/dashboard/business/qwikalert.html
Regards
TD

Is it possible to make a copy of the Leopard install DVD?

Is it possible to make a copy of the Leopard install DVD? If so, is there a special way this has to be done? I just found out that we needed to use the Leopard install DVD to recover a complete backup from Time Machine after a recent hard drive failure. We have the family pack of Leopard, so I would like to keep the original at home and send a copy when my daughter goes off to college in case she needs to recover again. Her machine was originally a Tiger MacBook, so those install disks will not work. If it is not possible to copy the DVD, is there a way to create a bootable utility to do a time machine recovery?

This half-solved my problem. I have had no problems creating a backup copy for my intel based computers, but non-intel based computers are problematic; a G5 powermac tower and a G4 Powerbook. Both with super drives for single density burning. Both have Leopard running, installed from an install disc purchased from Apple. However, neither will mount the copy, but intel based computers will. have burnt/burned with both toast 9 and Disc Utility. Discs won't mount and are "spit out" by the drive.
Power Mac G5 OS X: 10.5.4
Model Identifier: PowerMac7,3
Processor Name: PowerPC G5 (3.0)
Processor Speed: 2 GHz
Number Of CPUs: 2
L2 Cache (per CPU): 512 KB
Memory: 1.5 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.8f7
Any thoughts?
-Jim

I am trying to find out if I can change a setting of the calendar in my iPhone. When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change? SS

I am trying to find out if I can change a setting of the calendar in my iPhone.
When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change?

Hello SMEvans32
You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
iCloud: Calendar sharing overview
http://support.apple.com/kb/PH2689
iCloud Setup
http://www.apple.com/icloud/setup/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Top-Level Navigation Bar - Is it possible to make it 3 levels?

Dear Portal Experts,
Could someone please advise if it is possible to make the Top-Level Navigation Bar show more than 2 menu levels? I looked at the document and it said we can only have 1 or 2 levels. But I'm just wondering if there is any way around it. Thanks.

yes you are right .we can set only 1 0r 2 levels but good news is there is a workaround
follow this blog
Tag Libraries: Creating a Hover Menu in SAP NetWeaver Portal
reward points if helpful

Is it possible to make a type cast in TestStand?

I've got the following problem.
I use a receive function which waits for an undefined package. (struct package).
The problem is i can't specify the module with the exaxt package.
Generally in C i define a Pointer and create enough buffer for it. Is it the same in TestStand?
Is it possible to make a type cast?
for example:
i've got these packages
struct packet;
struct data;
the function does not know which structure to receive.
err = receive(buffer,maxlen);
how do i specify the buffer variable?
can i create a type "void" with a String to have enough buffer.
and then to make a type cast, for example "Locals.dataobject = ((data)Locals.buffer)"
any ideas?
thx for help

Unfortunately there is no way to do type-casts in TestStand. What you could do is write a wrapper-dll in C, that has for example two parameters for both possible structs. The dll then takes one of the parameters, does the typecast and passes it on to your original dll.
From TestStand you can pass the struct(or better container in the "TestStand language") you want to use to the accoridng parameter of the wrapper-dll, leaving the other parameter empty or with some default-value.
Hope this helps!
André

Hi, can I move my iTunes library to an external hardrive without having to consolidate it as my prehistoric computer just doesn't have the space even though I have deleted everything possible to make room? Please help :(

Hi, can I move my iTunes library to an external drive without having to consolidate it as my prehistoric computer just doesn't have enough space even though I have deleted everything possible to make room? Please help

Hi, do you know if this works if I then want to move my library to a new computer as that is my main intention bacause my old computer hasn't got enough space for me to add new albums so I want to ditch the computer (its got to be about 100 years old and doesn't seem to cope well with modern technology!!) and start using my laptop for my iTunes. I am at the point now where i'm ready to throw both my computer and iPod out the window!!!! I might point out as well that in trying to clear space on my computer I accidently deleted the Bonjour programme which is aparently needed to use the home share option, oops!!!!
Thanks, Kerry

Is it possible to make two type of partitions onto an external drive?

Hi,
I'm on an intel iMac using Tiger and I know to back up my hard drive I need to choose the GUID partition and Mac OS Extended (Journaled) in order to be able to boot from the partition.
So if I make 4 partitions is it possible to make 3 partitions GUID Mac Extended (Journaled) and then make 1 that is Apple Partition Map? I tried it and I couldn't figure it out using my Tiger Install disk and selecting Disk Utility option.
My sister is using a Powerbook PC G4 also using Tiger and I want to make a bootable copy for her as well but just wondering if this can be done?
S.

Niel,
Thanks, so if I format it all as APM I can either clone OSX 10.4.11 which I have on my internal now. If I do a backup of my intel and Powerbook PC both of those will already have Tiger on them so do I need to do another Tiger install on each of those partitions?
Also by doing it this way I can't boot from a parition onto my intel can I?
Guess I'll have to weigh whose system is more important or just back up her drive as GUID on my computer and she can restore from it if she has too but won't be able to boot from it.
S.

Is it possible to make a partition in Windows 7 and then place OS X on that partition?

My employer just gave me a new MBP 13" with Windows 7 on it. It has bootcamp running, but no option to boot in Mac OS. IT dept. said they deleted Mac OSX Lion due to security concerns (?). In any case, as I travel quite a bit and have and ipad and iphone, I would like to use Mac OSX for personal use and Windows 7 for work.
Is it possible to make a partition in Windows 7 and then place Mac OSX Lion on the partition so that I do not need to reinstall Windows? I know it would be possible to wipe the HDD and then add Mac OS, then bootcamp, then Windows 7, but adding again would get my IT dept involved which would put me back to square one.
Any help would be appreciated!!
JF

Ok let me ask you IF the IT department of your workplace does NOT want OS X installed on "THEIR" (The Companies) computers because of what they think is some type of security issue why are you trying to go against their wishes and install OS X on a computer that is NOT owned by you.
That could cost you your job.
If you continue down this path you will screw up the Windows install and have to take the system back to the IT department to get it fixed. What do you think they will say at that point?
Do as you like but you would be better off just buying your own Mac computer if you are set on using OS X as your personal operating system.

Is it possible to make an album, with seperate, and different artwork for each track? Thanks.

Got a few tracks and I was wondering if its possible to make like an album, but each track different art?

You can give each track its own artwork. iTunes will normally display the artwork of track 1 in album listings. The individual track art will show in the small window at the top of the screen when playing, or the artwork panel of the mini player, or the now playing window on a device. Try it and see.
tt2

Is it possible to make an iCloud account used by everyone in my school?

In my school we have iPads. Would it be possible to make an iCloud account used by everyone for contacts and calendars?

You do not give everyone the username and password of that account. This would be a violation of iCloud terms and conditions.
I've done what you want done with a calendar. You use the iCloud account yourself, then use the 'broadcast' facility to produce a subscription URL that everyone can put into their calendar software. If you make the calendar public anyone can subscribe. They don't even have to know the account name let alone the password.
Log into the account on www.icloud.com and test it out.
Once you have that working you might try the same thing with a contact list. I see no reason it shouldn't work.

Is it possible to make an OSB Proxy service offline/online based on BS

JMS QUEUE
|
|_____ Proxy Service <-------->Business Service <---------> External System URL
I have a configuration as shown above.
There is a way to make the Business Service offline/online based on the External system URL being offline/online by setting the
Business service-> Operational Settings->Offline Endpoint URIs with a timesatmp.
Is it possible to make the state of the proxy service to enabled/disabled based on this state of BS based on external enpoint URI?
This is a requirement such that the messages in the JMS queue doesnot get lost or consumed when the external system is offline.
Thanks in Advance!

I have thought about this. There are some problems here....
I cannot use the same proxy to invoke the java callout and then based on the code or handler disable it, since
1) i would have no way to enable back the proxy again.
2) Also there is some amount of message loss.
So i will have to use another proxy to do the same, but in this case
1) what would be the trigger to this proxy?
2) And how often do i invoke the java callout to see if the URI is up or not? (wouldnt that affect the performance?)
I am just wondering why did they give an offline URI option in the business service and no similar option in the proxy service, Any Idea?
Thanks

Is it possible to make crop presets in A3?

Similar Messages

Maybe you are looking for