Is it possible to make my project exe

dear members
my project is composed of 30 fmx file in addition to
60 rdf file
my question is
is it possible to make my project executable package (setup file that runs under winows98 or xp)
and how?

You will have to contact Wise about getting their software. See the link provided.
We have the clients install the forms runtimes before installing our application.
As an alternative, you can use the Oracle installer to install both the Forms Runtime and the forms files. You need to search Oracle TechNet for the Oracle Installer documentation. The oracle Installer does not build a single executable, but can handle installing both the Forms Runtime and the Application in one step.

Similar Messages

  • In Visual studio 2010, How to make my project Exe chowing a PDF book?

    In Visual studio 2010, How to make my project Exe chowing a PDF book?

    Hi,
    Since this issue is mainly related to PDF which is a product of SAP, I would recommend you post this issue on its website to get help.
    Regards.
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Is it possible to make an .exe file in Forms 6i

    Dear Sir,
    I have some doubts regarding some of the Oracle Products.
    1. Is it possible to make .exe file in Oracle Forms 6i ?
    2. In Oracle 7.3 / Forms 4.5/ Reports 2.5, it was necessary to install Oracle Enterprise at the server and install forms and reports runtime at the nodes. What is the case with Oracle 8i and Forms 6i and Reports 6i.
    Do we need to install the runtime at the nodes.
    3. If I develop a software using D2k (Forms 6i/Reports 6i) using Oracle 8i, what is required at the client's place to run it. Do they need to buy Oracle 8i as well as D2k(in full) or D2K Runtime is seperately available?
    Please reply to the above queries. Thanking you
    Sambaran Datta
    null

    - You cannot create a single exe file for Forms. You will have to install the runtime and then deploy the application fmx files.
    To deploy, you will need to install the Forms runtime on each machine which will be running forms. So if you are running client server and you have 100 client machine you would do 100 installs. Alternatively, if you are installing on the Web then you install the runtime on a server and your 100 clients only need to connect from browser.
    I'm not sure how the licencing sales are worked out - your account manager would have a better idea but you don;t have to have an 8i for every client (!) - the Forms runtime and the database are separate.
    Regards
    Grant Ronald

  • Is there a possibility to make communicate captivate and storyline to make a project?

    I would like to know if there is a posibility to make one project with both captivate and storylien? Cheers

    Oui je suis francais. Il me semble que c est dans son ebook sinon dans "
    mastering captivate 7". Je ne m en souviens plus.
    Le 27 févr. 2015 14:27, "Emmanuel Bonnaud" <[email protected]> a écrit :
    Thanks you lilibiry.  I am definitively a Cp8 addict . P.S i have learned
    cp8 thanks to kevin siegel's books and you was mentioned there
    Le 27 févr. 2015 12:39, "Lilybiri" <[email protected]> a écrit :
    >>     Is there a possibility to make communicate captivate and storyline
    >> to make a project?  created by Lilybiri
    >> <https://forums.adobe.com/people/Lilybiri> in Adobe Captivate - View
    >> the full discussion <https://forums.adobe.com/message/7235628#7235628>
    >>

  • ERM5.3 - Is it possible to make Sub Process & Project/Release non-mandatory

    Hi All.
    I would like to know whether it is possible to make Sub Process & Project/Release in Create Role Definition section non-mandatory fields?
    If so where would I be able to change the config?
    Thank you.
    Mike Hannie

    Dear Mike Hannie,
    It is not possible. Project/Release ID and Subprocess are required fields.
    The Project or Release ID field allows you to track and filter roles by project or release based on your organizationu2018s requirements.
    When you create a role in Enterprise Role Management, the business process you assign to the role is one of the roleu2018s defining attributes and determines which subprocesses you can assign to that role. During the role creation process, the subprocesses available for you to select as role attributes are determined by the business process to which the subprocess is mapped.
    Condition group:
    A condition group is defined from a set of role attributes (such as a business process, subprocess, functional area, role type, or role name) and is based on role values and conditions. After you create a condition group, the system applies it to a role creation process to override the default role creation process when the criteria from the condition group are met. You can apply multiple condition groups in one role creation process, but you cannot associate multiple processes to one condition group.
    Regards,
    Naveen

  • Is it possible to make .dll file of .vi project then load it to CVI and use the APIs in the dll to CVI project

    Is it possible to make .dll file of .vi project then load it to CVI and use the APIs in the dll to CVI project?

    Hi Kumar,
    It is possible to make .dll from Labview and i think we can call the same from other programming application also.
    Pls refer the
    below link
    http://zone.ni.com/devzone/cda/tut/p/id/4038
    GAnesan KAni

  • Is it possible to make an app that is like a three way (or more) instant messenger?

    so me and my frineds all ways text eachother. but we wanna know what other pople say to each other too. so is there an app that has 3 way instant messaging? is it possible to make one? if i knew how to use xcode and make apps i would get on it, but i dont. so im asking you guys for help.

    jtbullet wrote:
    app place the pdf when it is compiled?
    Assuming the pdf is contained in the application folder when the app is then compiled? Is the pdf contained in the app, or does it get installed somewhere?
    Sure, you can create an app that only opens up a PDF. The usual place for that kind of stuff is in the application's bundle, which Xcode will do if you add the PDF to your project.
    charlie

  • It's is possible to make a select from a view?

    I don't know if it's possible to make a select of a table-view like V_T5F99FW if it's possible does anybody tell me how can I do?
    Thanks a lot,
    Regards,
    Rebeca

    Hi Rebeca,
    You can surely do a selection from a projection and database view but not from a maintenance view.
    The selection from a view works like a normal selection only.
    watch this link
    http://sap.ionelburlacu.ro/abap/ABAPperformance.html#Select_with_view
    Regards,
    Manish
    Edited by: MANISH GUPTA on Aug 31, 2008 1:38 PM

  • Is it possible to make "autorange​" on SB-RIO 9636

    Hello,
    I want to know, if it is possible to make a kind of "autorange" for the analog inputs of the SB- RIO 9636 board.
    The mean is to increase the accuracy, if small voltages are used.
    But I am not sure, if the will be something destroyed, if I apply a high voltage in a sensitive range.
    Do you have any hints or tips?
    Best regards, 
    Ruedi
    Solved!
    Go to Solution.

    All,
    The sbRIO-9626 and sbRIO-9636 has the ability to set the gain of the programmable gain instrumentation amplifier (PGIA) within the LabVIEW FPGA Block Diagram using the 'Voltage Range' Property Node.
    You may be used to setting these settings in the LabVIEW Project by right-clicking the AIO and selecting Properties then changing the Voltage Range before compilation. When you set this property within LabVIEW FPGA, it will override the LabVIEW Project setting once called.
    You can implement in your LabVIEW FPGA code to first use +/- 10V (widest range) and check the voltage for each channel to see if the voltage range can be adjusted to a smaller value. For example, if you are using the +/- 10V range but are reading 1.156 V for a specific amount of time, then you can change the voltage range of that channel to be +/- 2V range. It may be benefecial to only autorange when you press a button or are needed so there is not the overhead of checking and adjusting before actually taking the readings. 
    Each channel can be independently selected as the PGIA is downstream of the multiplixer as shown in Figure 22 of the Operating and Instructions Manual.
    The manual also states the input range and resolutions for the sbRIO-9636 (+/- 10V, 5V, 2V, 1V). I think Sam_Sharp may have been thinking about the sbRIO-9623 or sbRIO-9633 which has a fixed input range of 0-5V.
     The LabVIEW Help also has more information on the Voltage Range Property Node:
    http://zone.ni.com/reference/en-XX/help/373197D-01​/sbriohelp/sbrio_9636/
    Tannerite
    National Instruments

  • How i can  Make the project exectued program

    Hi all
    please how i can Make my project an exectued program
    i used the compiler of JBuilder (Borland)
    and i want to make exe program
    how i can do that?
    thank's
    karfer

    I'm not familiar with JBoreland IDE, but is there a way to export your project .jar file?
    If so than theres your solution. .Jar files just need to be exected (IE: Double click.) Also if this isn't the appropriate solution than you can export to a .jar file and use JSmooth to turn your .jar file into a .exe. For any other solutions I suggest you look on google.

  • Is it possible to make is so that, immediately after I import a new clip into FCP, the file is automatically selected in the Event Library? (Similar to how After Effects and Premiere work).

    Is it possible to make is so that, immediately after I import a new clip into FCPX, the file is automatically selected in the Event Library? (Similar to how After Effects and Premiere work). Right now, after I import a new file, I have to then go searching for it amid all the other files in my project. It would be extremely helpful if the file I just imported was already highlighted and selected after import, making it instantly "locatable" and ready to go.

    Kryan73 wrote:
    …  after I import a new file, I have to then go searching for it amid all the other files…
    in a perfect world, you do know the recording date, and you simply scroll to that date.
    in a very perfect world, all your other imports are already tagged, so just have to create a smart list 'unrated' ...
    (I know those messy Events… a friend of mine constantly ignores my advice to check the time/date on his camera; on every battery swap, the cam creates a very erratic timestamp ... his actual recordings are listed as made in "2004" or in "2020" .... )

  • Is possible to make webservice that call another webservice??

    i already make 1 webservices(a) project and also make a class file that invoke another webservice(b)... when i test with SOAPUI to invoke my webservice(a), it failed. but when i make a main class and run as an application (standalone), everything is going good.
    is possible to make a webservices n invoke another webservices??????? if yes, can u give me an example..???

    yes its possible. I have written a web service that is part of our system that calls a third party system and passing credentials across to amalgamate data from 2 distinctly separate systems. A call is made to my webservice and in the code for that service I invoke a method on a set of stubs built against a third party wsdl.
    Similarly for smart card authentication users first call my webservice, but as I am not responsible for the smartcard validation itself I call another departments webservice, this time its a message based service and not RPC but either way I still build a SOAP message and then send it to a service which then does the smartcard validation for me.
    They are both working examples of a web service calling another web service.

  • Unable to make master project containing sub-projects using Project Online PWA (Cloud)

    Can anybody help? I tried a lot of navigations in Project Online PWA (not project server) but still unable to make master project containing sub-projects using Project Online PWA (Cloud)

    Hi John,
    It isn't possible to do this in the Project Web App either in Project Online or Project Server - you will need to use Project Professional 2013 and connect to your Project Online instance, or the subscription version, Project Pro for Office 365.
    Best regards,
    Brian Smith
    Blog |
    Facebook | Twitter | Posting is provided "AS IS" with no warranties, and confers no rights.
    Project Server TechCenter |
    Project Developer Center |
    Project Server Help | Project Product Page

  • Is it possible to make consumption as 101 Q -- 543 Q.

    Is it possible to make consumption as 101 Q -->543 Q.
    Means for getting final product into Unrestricted project stcok  through subcontracting order is it possible to do default consumption as 543 Q
    Edited by: Csaba Szommer on Aug 13, 2011 5:36 PM

    Yes, you can make any kind of logic in LV. Some would say even illogic. To implement a latch or any other logic with memory you can use a while loop with a shift register. If the shift register is uninitialized (nothing wired to the left terrminal from outside the loop), it will retain the previous value. You can use case statements to control when various pieces of the logic execute. It would not be difficult to construct a flip-flop which could be type D or JK or T depending upon the value of and input selector.
    Lynn

  • Is it possible to make an alert message.

    Hi,
    Anyone knows if it Is possible to make an alert-message that pops up ( f.e as a little window) on a specific day to remember me of something I have to do that day?
    Would be handy.
    Is this possible with Tiger or is there a third party application that does the trick?
    Thanks in advance.

    Try a free widget called quikAlert
    http://www.apple.com/downloads/dashboard/business/qwikalert.html
    Regards
    TD

Maybe you are looking for