Is it possible to make SAP 4.6C UNICODE enabled??

Is it possible to make SAP 4.6C UNICODE enabled??

No its not possible.
4.6 is Single code page or MDMP.
Best regards
deepak

Similar Messages

  • Hi Experts.. How to make scripts & SmartFrom Unicode enable

    Hi Experts..
    How to make Scripts & Smart From Unicode enable? i know for scripts we need to check with driver program & 
    For smart from we need to check the generated function module. Correct me if am wrong. 
    I wanna to know how to make layouts & from Unicode conversion....or enable??
    Thanks In Advance
    Santosh.S
    Points for sure ...

    Hi Donghai,
    Have you tried using the command
    CHAIN ENDCHAIN.
    Try displaying the message for te field you wish to within CHAIN and ENDCHAIN which will allow you to enter the data in the field even after the error message is displayed.
    Caution: Mention all the field names in CHAIN and ENDCHAIN which you want to be open for enterin the values into it.
    Thanks and Regards,
    Kunjal Patel

  • Top-Level Navigation Bar - Is it possible to make it 3 levels?

    Dear Portal Experts,
    Could someone please advise if it is possible to make the Top-Level Navigation Bar show more than 2 menu levels?  I looked at the document and it said we can only have 1 or 2 levels.  But I'm just wondering if there is any way around it.  Thanks.

    yes you are right .we can set only 1 0r 2 levels but good news is there is a workaround
    follow this blog
    Tag  Libraries: Creating a Hover Menu in SAP NetWeaver Portal
    reward points if helpful

  • Is it possible to make connection for the VC application the SQL Server

    hi
    I have requirement like, We have some data available in SQL server as central repositoty. My client want to make the Anylatics application like showing graphs in VC based on the data available in SQL server.
    My question. Is there any possiblity to make the connection the sql server by creating some system object using some JDBC connection Like that.
    What is the possibility.
    can u any body tell what is the work around need to be for this requirement. Whether it is possible or not.
    Regards
    vijay

    Hi Vijay,
    In your other thread, I have given the link to the following doc which will help you to in configuring the JDBC Connector.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/b00917dc-ead4-2910-3ebb-b0a63e49ef10
    That was the first step.
    In the second step, you need to create a JDBC System in the portal. Go through the following doc which explains how to create BI JDBC system for VC. All you need to change is that on Page 10, choose JDBC system instead of BI JDBC system, and do the necessary configurations.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6209b52e-0401-0010-6a9f-d40ec3a09424
    As rightly said by Marcel, you can use stored procedures as well as SQL statements. As far as stored procedures are concerned, all you need to do is go to Enterprise Manager, and create procedures in your database in the same way by which you create new tables and users (Refer my article). Then you can use these procedures in your Visual Composer provided you have properly created the JDBC system in portal properly.
    Also have a look at the following doc:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6339e7d4-0a01-0010-1c98-db00e52e989a
    Bye
    Ankur
    Do reward points for helpful as well as solved answers!!

  • Is it possible to make OINV.CardName field on Sales Invoice Editable?

    Hi Forum,
    Sales Invoice has cardcode and cardname. Is it possible to make the cardname editable  on the form to be able to change the name on invoice.
    Thank you.

    Hi,
    Unfortunately, it is not possible in the application window where you can change the cardname which has been defiined for a cardcode field in the OINV table.
    The field is not editable .
    However, you can check and option of having a UDF to define and have the value appear which you want. Purpose for change name requirement is unknown to me but if it is required in the Print out then you can check the display of the UDF field in the print layout.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • The reporting point backflush is not possible for make-to-stock repetitive

    Hi All,
    we are using the assembly backflush in the MTS REM process. we are need to do the reporting point backflush
    if we tick against the RP backflush. what will be the effect in the process while confirmation.
    i read the sap library . it say like
    The reporting point backflush is not possible for make-to-stock repetitive manufacturing.
    is it correct.
    Thanks
    VRaj

    Hi mangal,
    i did all the setting as you said. but when click on the reporting point.
    system thru error
    Error reading reporting point information
    Message no. RM111
    Diagnosis
    The repetitive manufacturing profile is set for the reporting point procedure. However, either no reporting points exist for the material or they are incorrect. Two common reasons for this are:
    The repetitive manufacturing profile has been changed in the current session.
    You have not defined any milestone operations in the routing.
    When creating the product cost collector, no reporting points were created.
    Procedure
    Two alternative solutions are possible:
    Assign a repetitive manufacturing profile with no reporting point procedure to the material in the material master record.
    Recreate the reporting points by recosting the product cost collector. To do this, the following prerequisites must be met:
    In the material master record, in the production version, you must enter a routing under either detailed planning (first priority) or under rate-based planning (second priority).
    Milestone operations must exist in this routing. The system ususally automatically creates the reporting points from these milestones when creating a product cost collector or when creating a production version.
    how to create the REPORTING POINT

  • It's is possible to make a select from a view?

    I don't know if it's possible to make a select of a table-view like V_T5F99FW if it's possible does anybody tell me how can I do?
    Thanks a lot,
    Regards,
    Rebeca

    Hi Rebeca,
    You can surely do a selection from a projection and database view but not from a maintenance view.
    The selection from a view works like a normal selection only.
    watch this link
    http://sap.ionelburlacu.ro/abap/ABAPperformance.html#Select_with_view
    Regards,
    Manish
    Edited by: MANISH GUPTA on Aug 31, 2008 1:38 PM

  • Is it possible to make a homogenious copy

    Is it possible to make a SAP homogeneous copy from the backup of Oracle DB on HPUX (64 bit) to Oracle on Windows (32 bit) ?
    I am planning to make a sand box system on windows from the database backup of ORACLE/HPUX.
    Your reply will be highly appreciated
    Al Mamun

    Hi,
    I'd like to clarify a little.
    You <b>cannot </b>restore directly an Oracle backup from HPUX to Windows.
    As it is a different OS it is called "Heterogeneus" system copy.
    If you want to create a sand box, then ( not knwing your DB version ) you will have to export the data with R3load and import it on the new system.
    You can find the guide on
    http://service.sap.com/instguides
    The exact location depends on the SAP Version.
    If you are already on Oracle 10, perhaps you can take a look at the note <a href="http://service.sap.com/sap/support/notes/1003028">1003028:  Enhanced support for system copy in BR*Tools</a> as it explain a method to use transportable tablespaces for the heterogeneus system copy.

  • Is it possible to make the second Navigation invisible?

    That means is it possible to make the second line of the Toplevel Navigation invisible?

    Hello Jens,
    please take a closer look here.
    http://help.sap.com/saphelp_nw04/helpdata/en/5a/33befa45ca7f459b24d0c5d51d0749/frameset.htm
    Best Regards,
    Olaf Reiss

  • Is it possible to make department field mandatory in T.code KS01

    Hi all,
    I need to make Department field mandatroy in Transaction 'KS01' Create cost center
    Is it possible to make department field mandatory.
    Pls suggest me if any possibilities.
    Thanks & Regards
    Bhaskar

    Hi,
    To add to above, Just check this point:
    SAP does not support implementation of new fields exits from ECC 6.0. It will still support the existing field exits in the system
    Also check if you can create the field exits from program RSMODPRF..
    Regards
    Shiva

  • Is it possible to make an alert message.

    Hi,
    Anyone knows if it Is possible to make an alert-message that pops up ( f.e as a little window) on a specific day to remember me of something I have to do that day?
    Would be handy.
    Is this possible with Tiger or is there a third party application that does the trick?
    Thanks in advance.

    Try a free widget called quikAlert
    http://www.apple.com/downloads/dashboard/business/qwikalert.html
    Regards
    TD

  • Is it possible to make a copy of the Leopard install DVD?

    Is it possible to make a copy of the Leopard install DVD? If so, is there a special way this has to be done? I just found out that we needed to use the Leopard install DVD to recover a complete backup from Time Machine after a recent hard drive failure. We have the family pack of Leopard, so I would like to keep the original at home and send a copy when my daughter goes off to college in case she needs to recover again. Her machine was originally a Tiger MacBook, so those install disks will not work. If it is not possible to copy the DVD, is there a way to create a bootable utility to do a time machine recovery?

    This half-solved my problem. I have had no problems creating a backup copy for my intel based computers, but non-intel based computers are problematic; a G5 powermac tower and a G4 Powerbook. Both with super drives for single density burning. Both have Leopard running, installed from an install disc purchased from Apple. However, neither will mount the copy, but intel based computers will. have burnt/burned with both toast 9 and Disc Utility. Discs won't mount and are "spit out" by the drive.
    Power Mac G5 OS X: 10.5.4
    Model Identifier: PowerMac7,3
    Processor Name: PowerPC G5 (3.0)
    Processor Speed: 2 GHz
    Number Of CPUs: 2
    L2 Cache (per CPU): 512 KB
    Memory: 1.5 GB
    Bus Speed: 1 GHz
    Boot ROM Version: 5.1.8f7
    Any thoughts?
    -Jim

  • I am trying to find out if I can change a setting of the calendar in my iPhone.   When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday.  Is it possible to make this change? SS

    I am trying to find out if I can change a setting of the calendar in my iPhone. 
    When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday.  Is it possible to make this change?

    Hello SMEvans32
    You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
    iCloud: Calendar sharing overview
    http://support.apple.com/kb/PH2689
    iCloud Setup
    http://www.apple.com/icloud/setup/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Is it possible to make a type cast in TestStand?

    I've got the following problem.
    I use a receive function which waits for an undefined package. (struct package).
    The problem is i can't specify the module with the exaxt package.
    Generally in C i define a Pointer and create enough buffer for it. Is it the same in TestStand?
    Is it possible to make a type cast?
    for example:
    i've got these packages
    struct packet;
    struct  data;
    the function does not know which structure to receive.
    err = receive(buffer,maxlen);
    how do i specify the buffer variable?
    can i create a type "void" with a String to have enough buffer.
    and then to make a type cast, for example "Locals.dataobject = ((data)Locals.buffer)"
    any ideas?
    thx for help

    Unfortunately there is no way to do type-casts in TestStand. What you could do is write a wrapper-dll in C, that has for example two parameters for both possible structs. The dll then takes one of the parameters, does the typecast and passes it on to your original dll.
    From TestStand you can pass the struct(or better container in the "TestStand language") you want to use to the accoridng parameter of the wrapper-dll, leaving the other parameter empty or with some default-value.
    Hope this helps!
    André

  • How to make SAP B1 connection with Windows Sharepoint Service 3.0

    how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
    public bool ConnectToCompany()
                oCompany = new SAPbobsCOM.Company();
                oCompany.Server = "192.168.1.58";
                oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
                oCompany.CompanyDB = "SBODemoUS";
                oCompany.DbUserName = "sa";
                oCompany.DbPassword = "abc";
                //oCompany.UseTrusted = true;
                oCompany.UserName = "manager";
                oCompany.Password = "manager";
                oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
                oCompany.LicenseServer = "192.168.1.58:30000";
                int i = oCompany.Connect();
                if (i != 0)
                    return false;
                return true;
    protected override void RenderContents(HtmlTextWriter writer)
                if (conn.ConnectToCompany() == true)
                    writer.Write("Hello" + this.Context.User.Identity.Name);
    Edited by: bikalg on Nov 28, 2010 9:43 AM

    Hi.......
    Welcome to SAP Business One Forum.....
    Unfortunately this is the wrong forum you posted here.
    I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
    Regards,
    Rahul

Maybe you are looking for