Is it possible to make several copy actions to a plan in COPA?

Hi Experts,
In COPA, we would like to copy actual data from last year to the planning we made for reference use. The user should then adjust these actual figures to plan data.
Since we would like to copy contract data and invoice data (which was sent to COPA via SD) to the plan we need to have two copy actions:
1. copy actuals with record type A (contract data)
2. copy actuals with record type F (billing data)
The problem is now that the data from the second copy action overwrites the data from the first copy action.
Is there a way to have copy different data to the plan without the data being overwritten?
And, is it possible to copy data to the plan for only 2 months instead of for the whole year? Now the system says that the period to be copied should be equal to the period from the planning package.
Best regards,
Stephan

Never ever presume that your web page must take up my entire screen. That's considered rude. My browser settings and preferences are my choice; not yours.
If you want to design web pages that fill the end-user's available viewport without scrollbars, use a liquid or semi-liquid layout in percentages.
http://alt-web.com/TEMPLATES/3-col-semi-liq-layout.shtml
Alternatively, you can use multiple style sheets & progressive enhancement techniques (media queries) to target specific devices by their width. This is how modern developers are able to support different layouts for smartphones, tablets and desktops.
http://www.adobe.com/devnet/dreamweaver/articles/introducing-media-queries.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Similar Messages

Is it possible to make a copy of the Leopard install DVD?

Is it possible to make a copy of the Leopard install DVD? If so, is there a special way this has to be done? I just found out that we needed to use the Leopard install DVD to recover a complete backup from Time Machine after a recent hard drive failure. We have the family pack of Leopard, so I would like to keep the original at home and send a copy when my daughter goes off to college in case she needs to recover again. Her machine was originally a Tiger MacBook, so those install disks will not work. If it is not possible to copy the DVD, is there a way to create a bootable utility to do a time machine recovery?

This half-solved my problem. I have had no problems creating a backup copy for my intel based computers, but non-intel based computers are problematic; a G5 powermac tower and a G4 Powerbook. Both with super drives for single density burning. Both have Leopard running, installed from an install disc purchased from Apple. However, neither will mount the copy, but intel based computers will. have burnt/burned with both toast 9 and Disc Utility. Discs won't mount and are "spit out" by the drive.
Power Mac G5 OS X: 10.5.4
Model Identifier: PowerMac7,3
Processor Name: PowerPC G5 (3.0)
Processor Speed: 2 GHz
Number Of CPUs: 2
L2 Cache (per CPU): 512 KB
Memory: 1.5 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.8f7
Any thoughts?
-Jim

Possible to make backup copy of Tiger DVD?

I'd like to make a backup copy of my Tiger DVD, just to be safe. I've tried to do this with Toast Titanium and also simply copying the DVD files to my hard drive first. Both don't seem to work.
Isn't this possible? What if this thing gets damaged? Or am I being naive in thinking Apple would allow such a thing?
Thanks for any help!

The disks which came with each Mac are indeed system specific. However, retail disks which are newer than those systems are not system specific.
Some may believe that they are not system specific, and I've seen them post here. Though these links should satisfy most people's need for clarity:
http://discussions.apple.com/thread.jspa?threadID=121839&tstart=0
http://docs.info.apple.com/article.html?artnum=106176
http://docs.info.apple.com/article.html?artnum=25497
http://docs.info.apple.com/article.html?artnum=25784
http://docs.info.apple.com/article.html?artnum=25517

Possible to make a *copy* of a RecordSet

i have a SWF that remotes a fairly large RecordSet (~1800
records). It's a list of products and some info about them.
I'm writing some code to let a store administrator associate
products with each other ( so the site says "These other Companion
Prodcuts might interest you"). I therefore have to list one record
set of 1800 products simultaneously in two different data grids.
the first to list the products and load the 'Companion Products'
list. the other to let the admin choose which products to
associate.
Is it possible to COPY a dataset returned from a remoting
call? I have my app working right now but each instance of the
productListDataGrid that I have on my flash movie calls the list
from the server independently. I was thinking it would be more
efficient to call the list once and split it into two copies--one
for each dataGrid. Can this be done?

All you have to do is something like this:
var myRS:RecordSet = myService.getData();
myDataGrid.dataProvider = myRS;
myOtherDataGrid.dataProvider = myRS;
You can put those lines in a function and call it once. If
you get an error when you try to put what came from getData() into
myRS (datatype error), change the code to this:
var myRS:RecordSet = RecordSet(myService.getData());
That casts the return variable into a RecordSet.
I hope this helps.

Is it possible to make a copy of my entire iTunes library to my USB 20 gig?

I would like to back up my ENTIRE library (not just purchased songs) so that I could restore it if I ever needed to. I have around 8 gigs of data in my library which requires about 4-5 CD's to back up. Maybe this is a dumb question, but isn't there any other media option besides CD's??? Like, say, an external hard drive (USB SanDisk)?? That way I could just perform a periodic backup using ONE device instead of taking like an hour and a bunch of CD's.
Thanks in advance for any help you can give on this topic!

Click here and follow the instructions.
(49810)

How can I make a copy of the FAQs module or filter on language?

Hi,
is it possible to make a copy of the FAQs module? I need to have FAQs in different languages.
I can add event, photo, news ands media modules but not a new FAQs module.
I also found that you can add a category and display the FAQs with the filter: cr or individual filter. But where do I add the category name to filter on?

Solved!
Quick solution: the ID is used for the category name, so I need to do a time consuming process to find the id.
Result:
{module_faq,c,19227,,ajax,}
Great!

Is it possible to make international calls without...

Is it possible to make international calls without an unlimited plan? If so, what are the skype credit rates for US to UK calls? And do I need to do anything special to set up this ability?

Hi,
http://www.skype.com/intl/en/prices/payg-rates/?currency=USD#cc=GB
http://www.skype.com/intl/en/prices/payg-rates/connection-fees/?currency=USD#cc=GB
Hth
On ne regarde pas l'avenir dans un rétroviseur !
IMac Intel Core i3 3.2 GHz - RAM 12 GB - OS 10.10.3
Skype 7.8.391
Logitech usb headset or Jabra 250 bt

Is it possible to make a homogenious copy

Is it possible to make a SAP homogeneous copy from the backup of Oracle DB on HPUX (64 bit) to Oracle on Windows (32 bit) ?
I am planning to make a sand box system on windows from the database backup of ORACLE/HPUX.
Your reply will be highly appreciated
Al Mamun

Hi,
I'd like to clarify a little.
You <b>cannot </b>restore directly an Oracle backup from HPUX to Windows.
As it is a different OS it is called "Heterogeneus" system copy.
If you want to create a sand box, then ( not knwing your DB version ) you will have to export the data with R3load and import it on the new system.
You can find the guide on
http://service.sap.com/instguides
The exact location depends on the SAP Version.
If you are already on Oracle 10, perhaps you can take a look at the note <a href="http://service.sap.com/sap/support/notes/1003028">1003028: Enhanced support for system copy in BR*Tools</a> as it explain a method to use transportable tablespaces for the heterogeneus system copy.

I downloaded CS6 and was told that it was possible to make a hard copy DVD for safety,is this correct and if so how is it done?.

I downloaded CS6 and was told that it was possible to make a hard copy DVD for safety,is this correct and if so how is it done/.

Use a DVD burning program:
https://www.google.com/search?q=vdvd+burning+program&ie=utf-8&oe=utf-8&aq=t&rls=org.mozill a:en-US:official&client=firefo…

Is it possible to make master pages with several title in one file? & Can I define page range from

Is it possible to make master pages with several title in one file? & Can I define page range from which page to which should be specific title?

While the number of master pages is not unlimited, you can have quite a few in any file. I've never seen the limit documented, but it's in the hundreds, or more likely thousands. There is, I believe, a page limit of 9999 pages per document, but I don't know if that includes the masters or if they are counted separately.
You can choose a page range in the Pages panel, then assign a master to them manually, and I beleive there are some scripts floating around that can assign a master page based on the appearance of a paragraph style (for chapter start pages, for example).

I have bought the new Iphone5. The old phone "Iphone4" has the same account as my daughters iphone 4. Now I would like to have separat accounts, is that possible? Can I make a new account and still make a copy of my iphone 4 to my new iphone 5?

I have bought the new Iphone5. The old phone "Iphone4" has the same account as my daughters iphone 4. Now I would like to have separat accounts, is that possible? Can I make a new account and still make a copy of my iphone 4 to my new iphone 5?

You need to plan. Check this tip:
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

Possible to make a script for duplicating index entries?

I would like to make things easier than they seem to be.
I have several references (1:st level topics) already that are correct with page numbers and all that.
Now, I would like to create a 1:st level topic, under which I put "duplicates" of these already indexed references and put them as 2:nd level topics, under the main, 1:st level, topic.
Example.
Let's say I have these references (1:st level topics) already, with correct page numbers and everything:
Audi 4-6, 8
BMW 7, 21-24
Citroen 11, 12
Mercedes 80
Volkswagen 31-36
Okay, these are perfectly indexed and all the pages are correct.
Now, I would like to have these references as both 1:st level topics, and also as second level topic references under the main topic "Cars", like this:
Cars 4-80
Audi 4-6, 8
BMW 7, 21-24
Citroen 11, 12
Mercedes 80
Volkswagen 31-36
My question is. Is it possible to achieve this by a script, so I can copy (duplicate) all these references and put them under the topic "Cars" too (preserving the 1:st level topics too of course), without having to go to each of the pages and create new topics all over again for every single finished topic, that I intend to put under the main topic "Cars"?
Just to inform you, the above named 5 topics, are NOT only the topics I want to put under "Cars"... there are like a hundred :).
Is it possible to make a script like this? Or do I have to do all the work ALL OVER again?
Martin

Hmmm… This one copies all files which have 'flash' (could by x-shockwave-flash) string in mime type to /tmp/flash. Hope it will be helpful.
for i in ~/.opera/cache4/* ; do file -i -F '' $i | grep flash | cut -d ' ' -f 1 | xargs cp -t /tmp/flash 2>/dev/null ; done
UPDATE:
Sorry, there was a little bug, I've just changed 'video' to 'flash' ('video' coundn't match 'x-shockwave-flash').
Last edited by zergu (2008-12-25 21:16:38)

Is it possible to make a normal PDF from a Printer PDF. It's all I have left lost the rest so it's important

can anybody help?

Hi Sara,
No I made a PDF for printing and that's all I have left. But I'd like to make an normal PDF
Culinaire groet,
Frans van Meeuwen
Hoofdredacteur
[private information removed]
Deze informatie ontvang je aangezien je reeds contact had met Passion HI magazine, of met een van zijn medewerkers,
of via deelname aan één of andere wedstrijd die in samenwerking was met Passion Hi magazine.
Wens je deze informatie niet meer te ontvangen stuur dan een e-mail met de vermelding “uitschrijven” en we schrappen jouw adres uit onze mailinglijst!
Het is ten strengste verboden bijgevoegde documenten als PDF's en foto's verder te gebruiken of door te mailen zonder schriftelijke toestemming van Passion HI magazine.
Op 27 okt. 2014, om 21:24 heeft Sara.Forsberg het volgende geschreven:
Is it possible to make a normal PDF from a Printer PDF. It's all I have left lost the rest so it's important
created by Sara.Forsberg in Adobe Acrobat.com Services - View the full discussion
Hi Frans van Meeuwen,
Do I understand correctly that you have a printed PDF and want to get it back on your computer as a PDF file? If so, you could scan that document, save it as an image file, then use Acrobat or Adobe PDF Pack to convert the scanned file to PDF. Some scanning software saves directly to PDF, and if you don't have a scanner, I'm sure you could have it done at a local copy shop.
I hope that helps.
Best,
Sara
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6872502#6872502
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Acrobat.com Services by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Trouble with install disks - is it OK to make a copy of them?

Finally, I am trying to make a copy of the install disks that came with my MBP. This was recommended in several threads for preserving the original and having backups just in case.
I used Disk Utility to make a disk image - choosing DVD/CD master, no encryption - as I was instructed on another thread. I made the disk images fine of the 2 disks - they are now saved as disk images in the .cdr format. While I was at it, I made a disk image of the TechTool Deluxe CD that came with my AppleCare.
When I inserted a CD (and then I tried a DVD) into the slot to Burn the disk image of the first (and then the second) install disk, I got the message that there is not enough room on the disk I am trying to use (for either disk). I had no trouble burning a disk of the TechTool Deluxe - I did that on a CD.
When I go to Get Info for the disk image for the 2 install disks, it looks like each is no larger than 5 plus GB, which seems strange.
What am I doing wrong?
Mrs H

When you make images of the discs, it is compressed. So when you get info of the image, that is smaller than the actual disc size. You said disc two was 3.97gb but really uncompressed it is likely over 6GB. For both install discs one and two, you need dual-layer DVDs to burn.
Thanks for your help, mdpeterman.
I wondered about the compressed issue - but since I chose CD/DVD master, (from Disk Utility Help: "If you want to use the disk image with a third-party application, choose CD/DVD master. The disk image contains a copy of all sectors of the disk, whether they're used or not, and copies them to other CDs or DVDs bit for bit") with no encryption I assumed that the size of the disk image was identical to the original.
What you say tells me I'm wrong - that even with DVD master bit for bit, the image is compressed. Right?
I'll get back to you when I have solved this...
Mrs H
Mrs H

I need to make a copy of my SL installation DVD

I have SL installed in both my iMAC and my MacBook Pro. However, just for security's sake, I'd like to make a copy of the Snow Leopard installation DVD that Apple had sent me. I tried to do so using Disk Utility under SL, but when it came to actually copy the created image on a blank DVD, the system advised me that I didn't have enough space on my DVD. Are there readily available higher capacity DVD on the market that would fulfill this purpose (Higher than the traditional 4.7 GB ones? I think there are, having made a google search, but is there a specially recommended brand? I don't want a cheap one, since we are talking about an important DVD that may save me lots of trouble in a possible future problem.

To do so requires a dual-layer DVD-R. I would use a good brand such as Verbatim. Do the following:
Duplicate a CD or DVD
1. Insert the DVD/CD;
2. Open Disk Utility, and select the DVD/CD from the left side list (select the DVD/CD icon on top);
3. from the DU File menu select New | Disk Image from Disk 1;
4. Choose to format the disk image as DVD/CD Master, name the disk image and click Save;
5. When the .cdr file is finished select it with mouse and press COMMAND-I to open the Get Info and check the box to lock the file;
6. Choose the .cdr file from the left side list, click Burn, and insert a new, blank DVD or CD.

Is it possible to make several copy actions to a plan in COPA?

Similar Messages

Maybe you are looking for