Is it possible to make the Tags in 10.9 Bigger or similar to 10.8 rather than the current tiny dot on the side?

Hate the tiny dot on the side of the folders etc. Makes finding tagged folders much harder. Can this be improved?

I disdain using tags, finding them useless eye-candy, but there might be some 3rd-party apps that can do what you're seeking.

Similar Messages

I have a Ipod shuffle 4th generation. I would like for the music to shut off after one hour long song automatically rather than go to the next song. Is this possible?

I have an ipod shuffle 4th generation. I would like for the music to automatically shut off after one hour long song rather than going to next song on the list. Is this possible?

Sorry, but it's not. The only way to get this to work is to only put the one hour song on your Shuffle.
B-rock

Is it possible to undo the Ken Burns effect on all photos at once in iMovie, rather than clicking "crop" and "fit" on each individual photo?

Is it possible to undo the Ken Burns effect on all photos at once in iMovie, rather than clicking "crop" and "fit" on each individual photo?

Hey Villiam, Kevin is referring to setting a movement on a photo setting keyframes (like zoom out to in), right-clicking on Motion, and choose save as preset. This will put that movement into your presets folder under Effects. I am going to try this on my next montage and see if I can find some efficiencies. Thanks Kevin, that was a great tip!!!
Also thanks to Jim. I spent like 30 min looking at all the keyboard shortcuts. It's a little overwhelming to establish a solid shortcut format that a team of editors can learn and use. I'm going to be trying the FCP short cuts, then go back to the default. It looks like the PR default has a lot of existing and helpful shortcuts assigned already. It's just going to take getting used to a new platform.
I'm still looking for tools and/or methods to allow an editor to assemble a 60 second montage with 10 photos, VO and music in 30 minutes. It's going to be a challenge but I think it's possible with the right innovative process. I'll still challenge anyone to find a way to quickly assemble a montage in an assembly line or template-based fashion using Adobe Premiere CC where there's on-screen text, advanced transitions, timed to VO, etc.
I think I'm dreaming for a tool to automatically do this within Premiere, while I think the answer for now might just be customizing motion presets and creating a favorites folder of transitions that can be dragged onto each clip. I'll see if there’s a way to apply a set of transitions or motion presets to a series of photos on the timeline opposed to doing it one by one. I can see this solution being important as video montages are becoming more popular in our industry, and the faster we can make them using a professional software package like Premiere the more prosperous we will be.

I have like 4-5 teeny tiny dots in the screen of my iphone i don't know what they are from. I can only see some of them when I tilt my phone a certain way. And they are little bitty but I am wondering what they are from

I have like 4-5 teeny tiny dots in the screen of my iphone i don't know what they are from. I can only see some of them when I tilt my phone a certain way. And they are little bitty but I am wondering what they are from

my total library is 680 mb, nowhere close to the 2.08 in the pictures folder. I am obviously messing up.
Actually you’re not.
The iPhoto Window reports the size of the library that would result if you exported all the current versions +and nothing else+ to a folder on the desktop.
The iPhoto Library Folder contains the Original, Modified and thumbnail versions of your pics. It also contains various cache and database files +all of which are necessary+ for the working of the Library.
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
You can run a Library on an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

When my system upgrade from os x 10.9.4 to os x 10.10.1, the time of shot down in my system is very long rather than pervious os. my system is macbook pro 11.1

when my system upgrade from os x 10.9.4 to os x 10.10.1, the time of shot down in my system is very long rather than pervious os. my system is macbook pro 11.1.
please inform me about this problem

Jan 8 18:36:31 localhost kernel[0]: Previous shutdown cause: 5
Jan 8 18:37:06 Jashan-Mr-2.local shutdown[927]: reboot by apll:
Jan 8 18:37:06 Jashan-Mr-2.local shutdown[927]: SHUTDOWN_TIME: 1420729626 658562
Jan 8 18:39:44 localhost com.apple.xpc.launchd[1] (com.parallels.desktop.launchdaemon): Service has increased maximum shutdown time to 150 seconds. This will create a poor experience for the user.
Jan 8 18:39:45 localhost kernel[0]: Previous shutdown cause: 5
Jan 8 19:02:58 Jashan-Mr-2.local shutdown[1286]: halt by apll:
Jan 8 19:02:58 Jashan-Mr-2.local shutdown[1286]: SHUTDOWN_TIME: 1420731178 850680
Jan 8 19:02:58 Jashan-Mr-2 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.system): System reboot initiated by: shutdown.1286<-sessionlogoutd.1285<-launchd.1
Jan 8 19:13:09 Jashan-Mr-2 kernel[0]: Previous shutdown cause: 5
Jan 8 20:11:44 Jashan-Mr-2.local shutdown[1927]: halt by apll:
Jan 8 20:11:44 Jashan-Mr-2.local shutdown[1927]: SHUTDOWN_TIME: 1420735304 825738
Jan 8 20:11:44 Jashan-Mr-2 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.system): System reboot initiated by: shutdown.1927<-sessionlogoutd.1926<-launchd.1
Jan 9 12:06:41 localhost com.apple.xpc.launchd[1] (com.parallels.desktop.launchdaemon): Service has increased maximum shutdown time to 150 seconds. This will create a poor experience for the user.
Jan 9 12:06:41 Jashan-Mr-2 kernel[0]: Previous shutdown cause: 5
Jan 9 12:25:15 Jashan-Mr-2.local shutdown[1868]: halt by apll:
Jan 9 12:25:15 Jashan-Mr-2.local shutdown[1868]: SHUTDOWN_TIME: 1420793715 291375
Jan 9 12:25:15 Jashan-Mr-2 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.system): System reboot initiated by: shutdown.1868<-sessionlogoutd.1867<-launchd.1
Jan 9 12:28:47 localhost com.apple.xpc.launchd[1] (com.parallels.desktop.launchdaemon): Service has increased maximum shutdown time to 150 seconds. This will create a poor experience for the user.
Jan 9 12:28:48 Jashan-Mr-2 kernel[0]: Previous shutdown cause: 5

Emails generated by the Contact Form widgets are saying they are coming from me rather than the person who has generated the email?

Can I change the emails generated by the Contact Forms from saying that they are coming from me, to the address of the person that's actually generated the enquiry on the contact form? Or does this always automatically link back to my Creative Cloud account because thats how I'm hosting the websites?

Because they ARE coming from you (at least from your account)... this is the account the website is using to send the form to your email and this means that a user visiting your website can send you this email "EVEN" when they don't own an email account themselves.
No you can't legialy change the address to theirs... thats a big no no in most countrys but you can and should have a "contacts" field on your form that allows people to give you a email or phone number so that you can follow up.
p.s. many people make the mistake of trying to force email contacts in their forms and that offen turns people off using them if they MUST tell you the colour of their underware just to contact you about a sales offer or simple question then don't expect to get much feed-back from your forms.

Can you set up the bookmarks icon in the toolbar to display a vertical list of bookmarks on hover, rather than by clicking it?

I think I used to be able to hover over the bookmarks toolbar affordance (the clipboard icon to the right of the star) and all my bookmarks would display in a vertical list as they do when I click the clipboard icon. Is this possible?

This Add-on - [https://addons.mozilla.org/en-US/firefox/addon/mouseover-bookmarks-toolbar/?src=search Mouseover Bookmarks Toolbar] will open folders in the bookmarks toolbar by pointing, but that's as near as I can get for what you want.
Hope that may help.

How can I to return to the same position on a web page where I left it, rather than automatically getting returned to the top of the page?

It's annoying to keep returning automatically to the top of a web page that I often navigate away from--eg, Google News--rather than to the position I was at when I left it. I've looking over the Firefox settings and can't find where the default can be changed.

Try holding down the ALT key while you hit the left arrow key.
But in some cases, the webmaster may have configured the page to load from the beginning again. There's not much you can do about that unfortunately.

The map on find my iphone appears in several disjointed segments rather than a whole

On my Acer laptop the map on Find my Iphone appears as several disjointed segments rater than a whole map
What's causing this

I believe this app gets the names from their account. If they do not have their name in their account, then it will not show up for you.

What to do when your iPhone 6 has a small/tiny dot on the top of the screen?

I just bought my new iPhone 6, but when i powered it up i noticed a small dot on the top of the screen, It left for one day, now its back.
Does my warranty cover it and what will happen when I take it to get repaired?
Will they fix it or replace it?
Thanks

If you say it was gone for one day, you may try resetting your device. This won't delete your data stored on the phone.
Press and hold the Sleep/Wake button
Press and hold on the Home button
Keep holding both buttons until the display turns off and back on with Apple logo on it.
Alternatively, you may go to Settings - General - Reset - Reset All Settings
If this does not help, I believe you need to have your iPhone checked and repaired at your local Apple Store as it may be a hardware problem.
Apple specialists will most likely fix your device.

Whats the best file output spec for a file output i.e rather than an AVCHD disc

I have been making travel videos for many years and in all the formats available at the time at the time. I moved from analogue to digital and latterly HD video (1080x1920) via Panasonic HDC-SD600 camcorder. Using software I created AVCHD Discs and played them on my Blu Rayer Player. However I now realise that the discs can degrade? and start to stick on playback. So I moved on to creating Video Files that I can transfer to my flash drive to feed directly to my HD tv. In previous software I took the option MP4 HD and I had no problem. However the software did start giving an unrelated problem and I changed to Adobe Premiere Elements 12. But the MP4 HD option offered in Publish and Share when transferred to Flash Drive will not play on TV (No Movies Found). Could it be that I reformatted the flash drive to NTFS to allow greater tha 4G?. I have scanned various adobe forums and tutorials but not luckly enough to find one that explains the best outputs for this type of use
Can you help. I am slightly knowledgeable about codecs and containers.

Bill,
Finally solved my problem. It turned out to be the Flash Drive! I realised this was at fault when the TV stopped seeing any files irrespective of format. I re-formatted the drive back to FAT 32. I then used a ten minute video and with PE12 Publish and Share options created 6 files with different formats. 2 of these played back perfectly. I then went and done some homework and read up on Frames and Refresh rates and how PAL and NTSC still matters in this digital age. I finally opted for the AVCHD option of MP4 H264 1920x1080p at 25fps. Which I believe is correct for PAL countries.
My TV has 100hz refresh rate so that means at 25fps each frame is repeated 4 times every 25th of a second. Forgetting all the Tech when I watched the video I found it really good and that decides it for me!
It does leave me with something to live with however, I am apparently stuck with the 4 gigabyte barrier of FAT 32. However this gives about 30 minutes of HD video so I may have to opt for Video part one and Video part two for longer videos. I will re check the spec of my TV just to ensure the USB inputs are definately restricted to FAT 32.
I am now thinking about DNLA as another means of playing a video file from computer to TV. But this new to me so it looks like more homework.
Any tips or help will be welcome
Jack

How to configure a listener to listen on a different port rather than 1521 and register it on the database

Hi Everyone,
I have used 11gR2 RAC for a couple of years and now I've got this issue because I have tried to setup more than one database on RAC infrasturcture:
I have an existing database on my RAC. (lets call it orcl) which is listening on port 1521 and is functioning properly. Now I want to create anoher database (call it test) which is going to listen on port 1526. I am able to create a listener using netca, (as oracle recommended, I've created it with grid user). I am also able to create a database using dbca (with dba user). My problems stem from when I want to configure listener to register with the new database. If i set local_listener to my newly configured database, it won't be able to tnsping and therefore login. If I create tnsnames.ora file on local or remote server, I am able to ping the database, but when I want to connect using sql*plus (or any other client) I receive TNS-12514 error. By the way, I am using AIX 7.1 as my machine.
Let me know if any more info is required on this topic.

> Now I want to create anoher database (call it test) which is going to listen on port 1526.
Why? What is the purpose of using another listener? An Oracle Listener was designed to service multiple databases running on the same server. In all my years of working with Oracle and running multiple databases on the same machine, I have yet to be required to run more than one listener. And almost every single time I've seen someone try to provide rationale for multiple listeners, the technical reasons have no merit.
> If i set local_listener to my newly configured database
The LOCAL_LISTENER parameter does not point to a database...it points to a LISTENER!
LOCAL_LISTENER=(ADDRESS = (PROTOCOL=TCP)(HOST=hostname)(PORT=1526))
Cheers,
Brian

HT2736 i had a problem sending an itunes gift, it charge my credit card rather than my itunes account, i need the cc charge reversed and debit my itunes

i had a problem sending an itunes gift, it charged ,my credit card rather than my itunes account, it need it reversed on the cc and debited on the itunes.

Gifts will be charged to your credit card - you can't use your acocunt's balance for gifting, you can only use your credit card.
From the page that you posted from :
Note: When purchasing an iTunes Gift, a valid credit card must be on file; you can't purchase an iTunes Gift with store credit.

I want to make the adress bar smaller so that my bookmark bar can show more than three icons when placed on the same row.

I want to have about five to ten bookmark icons in the same row as the search and address bar. So i use Customize... and I put the bookmark bar on the same line. I leave the "Name"-textbox in every bookmark blank so that only the icons appear.
However, only two icons appear and the rest are displayed in a drop down menu from an arrow you click.
I don't need the address bar to take 70% of the screen. I don't want the bookmark bar to use an extra row. I just want to have five to ten bookmark icons next to my address and search bar. Is this possible?

What do you mean with "Save passwords" checkbox?
Is that box provided by an extension?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Websites remembering you and automatically log you on is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
Do not use Clear Recent History to clear the "Cookies" and the "Site Preferences"
* https://support.mozilla.com/kb/Clear+Recent+History
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

How do I force an HTML Article to load on every view rather than load a cached version of the page?

I've got several HTML articles, one is a search page. When you click a search result I am setting a variable in localStorage for the search query so it can be highlighted on the result page. When you get to the result page however, 99% of the time it loads a cached page. I need to force it to refresh and execute the JavaScript on every view not just when the View Application decides it should. Also the thumbnail is often cached to a really old version with something highlighted that you searched for 10 mins ago.
Is there any API that I can make the HTML Article load on every view?
Many thanks,
Kris.

Flash only supports a small amount of html in text areas. If what you re trying to include is within what it supports, then you assign the text to the textfield using the htmlText property of the TextField...
tfield.htmlText = "<a href="...">link</a>"; // will display "link" as a link

Is it possible to make the Tags in 10.9 Bigger or similar to 10.8 rather than the current tiny dot on the side?

Similar Messages

Maybe you are looking for