Is it possible to manage 11gR2 DB by using 10.2.0.5 agent and grid server

Hi,
I have a newly set the 11gR2 database on red-hat linux.
I want to manage it by using oem grid server.
My grid server version is 10.2.0.5 and I plan to install 10.2.0.5 grid agent to db machine.
Then can I fully use the features of 11gr2 database from grid server? Is there anybady has any ideas?
thanks.

I was successful in using Enterprise Manager Grid Control 10.2.0.5 a couple weeks ago while building a test RAC 11gR2 environment. There were a few features that I noticed that were missing from Grid Control, but were present in Database Control:
Grid Control does not know of the SCAN IP for RAC 11gR2; it points to the listeners on the nodes.
Grid Control does not provide administrative functionality for ACFS or ADVM.
These are the only deficiencies that I can remember, mind you I wasn't specifically looking for missing features, these are just the ones I happened to notice.
So the answer is, yes, Grid Control 10.2.0.5 with agent 10.2.0.5 seems to work fine with 11gR2. I cannot comment on support from Oracle, however I'd imagine they are working hard on certifying the product with 11gR2, if it isn't already.
Cheers!
Eric

Similar Messages

  • Is to possible to control a motor by using fuzzy logic toolbox in Labview and motor interfaced with PIC microcontroller

    sir
     I am doing a  PG project on fuzy logic control of robotic arm,In this first i need to write a code in LABVIEW fuzzy toolbox and interface that that code with PIC where motor is connected and a tachogenerator should be connected to motor to send speed to LABVIEW through PIC microcontroller where ADC is inbuilt in it.
    Please help sir me whether  it is possible to do that ,if not tell me do i require any interfacing device  ,I am very new to labview 

    Now for this problem, Fuzzy can be easily used to control the plant. Here is the softwares that would help in this task:
    - LabVIEW Full Development System (FDS) 2009 or later - The is the LV version that allow you accessing the latest Fuzzy Logic develoment
    - LabVIEW PID and Fuzzy Logic Toolkit 2009 - This has PID and Fuzzy Logic functions available for you to develop your controller
    - LabVIEW Control Design and Simulation Module 2009 - This is a complete set of functions that allow you to simulate and develop advanced control applications. In your case, you probably will be using this module for simulation of the DC motor.
    Now, you also will need a way to read the encoder and control the voltage applied to the motor. You have several options from NI for that process. Probably a multi-function Board could help since they have digital counters and Analog Output signals. However, I can't recommend what would be best for this application, but the ideal platform is the CompactRIO platform for your application. They have a Real-Time controller and integrated Input/Output modules with signal conditioning that could allow you to directly drive the DC motor. I would advice to go to our webside (http://www.ni.com/compactrio/) and verify what this platform does. For this platform, you will also need the following sofrware:
    - LabVIEW Real-Time Module 2009 - Allow you to develop you application in Real-Time for deployment.
    Hope this helps.
    Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

  • Management IP from service profile and from server

    are there a difference between the management IP from the equipment tab --> server1 --> change mgmt IP
    and from server tab--> service profile--> service profile1--> change mgmt IP
    as I found that when I configured the mgmt from server in equipment tab, I could not find this IP in the mgmt in service profile mgmt IP
    the attachment describe what I mean

    Out of band means communication over the 1G management port of the fabric interconnects.
    By default, each blade in a chassis slot gets assigned a CIMC IP address out of the pool. Therefore, if you associate the SP to another blade, the CIMC / KVM address changes.
    It is also possible to assign an IP address to a service profile, and avoid that the CIMC / KMV address changes, if association of the SP happens. The disadvantage is that you need a additional IP address for every SP, even if the SP is not associated. Therefore most customers don't use this feature.
    Therefore, a CIMC can have a max of 2 IP addresses.

  • Deadline agent and Possible roles in OM

    HI Experts,
                   Where we will use the relationships like Deadline agent and possible roles in Expert mode.

    Franklin,
    this export import works for user creation
    [User]
    UID=user1
    Password=user1
    Email_Address=xxxxxxx
    First_Name=John
    Last_Name=Smith
    role=pcd:portal_content/com.xxxx.ess.xxxxx_ess/com.xxxxx.ess.roles/com.xxxxx.ess.roles.ess;
    But in my case most of the users are already created, and now i need to do role mapping to these users.
    can we do role mapping to users through Export Import
    Is there any other way to do RTPM (Role to position Mapping) in portal.
    Thanks.
    Edited by: Chetan on Jul 13, 2010 6:50 PM

  • Is it possible to manage multiple investments from one bank in one g/l acct

    HI,
    My client has multiple investments in different plans with the same bank.
    eg:
    KOTAK LIQUID (INSTITUTIONS) - DAILY DIVIDEND
    KOTAK FLOATER LONG TERM - DAILY DIVIDEND
    Is it possible to manage both of these in one G/l account.
    Thanks and Regards,
    Sailesh Sinha

    Hi,
    Maintaining multiple GL accounts is good way because you would not know clear picture for each type of investments in same bank.
    Whenever management is asking for details for different type of investments in same bank, then it will give us trouble.If it is not required you happily use single GL for multple investments.

  • Is it possible to Manage iOS apps with Lion Server

    I was wondering if anyone knows whether or not it's possible to manage (add and remove) iOS apps using Lion Server, specifically apps available via the app store rather than apps built for internal use? I can't seem to see a way of doing it using profile manager but was wondering if I was maybe missing something?
    Thanks

    The answer to this would appear to be no.

  • Is it possible to manage Analysis Authorizations from the portal?

    Hello,
    We are using NW04s SP9 and BI 7.
    Is it possible to manage BI's Analysis Authorizations from the portal? If yes than how?

    hi
    In portals  there is a saying  all authentication in portal while authorization in ackend so it goes here also  BI authorization has to be done at backend . a way arround may be that u can migrate roles from backend to portal but in that case you need not create portal contents but authorization still remains at backend,hope this helps you please do not forget to give points
    With Regards
    subrato kundu

  • Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure?

    Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure 1.2?

    SF300 series is targeted for support in  PI 2.0.

  • Is it possible to Manage Sun Fire v60 without using Red Hat?

    I've been trying to enable a console connection via an Avocent dongle connected to the serial port using these directions:
    http://download.oracle.com/docs/cd/E19088-01/v65x.srvr/817-2025-13/chap2.html
    All I've been able to view is the BIOS output, and the grub menu; I am unable to control anything.
    Is it possible to manage a Sun Fire v60x without using a Red Hat server to issue power/status commands?
    Thank you.

    Hi.
    Serial console support only text mode. So can freasing after server change mode to graphics.
    For manage server You can read:
    http://download.oracle.com/docs/cd/E19088-01/v65x.srvr/817-2025-13/chap1.html#pgfId-1014396
    Lights Out Management (LOM)
    The Intel Server Management (ISM) software is a set of applications and agents for monitoring and managing servers. The agents can act as low-level stand-alone pieces, or can be used in conjunction with full-featured integrated management suites.
    Available features include power on, power off and reset. System Event Logs (SELs) and Sensor Data Records (SDRs) can be viewed remotely.
    IMHO: It's very old server and remote control of it not user frendly.
    Regards.

  • Possible to manage the MobileMe galleries made by iPhoto using Aperture3?

    I am considering moving my whole library from iPhoto to Aperture.
    I understand that I can import the whole iPhoto library, but is it also possible to manage the existing MobileMe galleries made by iPhoto using Aperture3, without changing the current URLs of the gallery?
    Thanks.

    I'd like some info on this also.
    Currently I have iphoto publishing photos to Facebook, Mobileme and Flickr. I have imported my iphoto library but none of these folders have imported. Is there a clever way of transferring these over to Aperture (3) such that my mobilem is unaffected as is my Flickr and facebook.
    Aperture 3 already see's my mobileme and I posted a new album to mobileme from Aperture wondering if that would force it to download the other albums on there already but it didn't. You would think there is a way to do this. Otherwise if I have to delete the links in iphoto to facebook and then repost them from Aperture they will show as completely new uploaded photos when a lot of them are years old and at a guess it will re-tag all my contacts who will all think there are new photos of them.
    Likewise will all my flickr comments be lost in the above process and will I effectively be starting from scratch again?
    Any thoughts, ideas, help and guidance would be very much appreciated. I'd like to get away from using both iphoto and Aperture to just using Aperture 3 now it has all the additional functionality of faces that I like to use.
    Thanks

  • Is it possible to manage QOS settings on BT Home H...

    Hi,
    is it possible to manage QOS settings on BT Home Hub?

    so I understand that there's no chance to put my dirty hands on these settings with my BT home hub 2.0
    is there's a chance to get complete list of default QOS settings for BT Hub & exchange?

  • Is it possible to manage 3-4 iPods from the same laptop?  Each iPod owner needs their own iTunes account, correct?

    I've used an iPod for many years, and now that my kids are old enough to enjoy their own, with their own music, I want to to buy each one their own shuffle.  I just don't know if it's possible to manage all of these different music libraries from one computer.  Any advice is appreciated.  Thanks, Jim

    Entirely possible.  If you create a different Windows login for each user, then everyone will have a distinct library by default, located in:
    C:\Users\user1/Music\iTunes
    C:\Users\user2/Music\iTunes
    etc.
    In this scenario it is a good idea to disable fast user switching in iTunes, so that you can't have multiple users logged in and running iTunes at the same time.  This is probably the best solution, especially as it provides the simplest upgrade path to the time when your children have their own computers.  The only real downside here is that it is a little more difficult (and not automatic) to share music between the libraries.
    You can also have multiple iTunes libraries under a single Windows login, though this is a little more awkward to set up and use - everyone will need to hold down SHIFT while starting iTunes and select his/her library based on the location of the appropriate iTunes database file.
    Last option would be to have one Windows login, one iTunes library, and just use different playlists associated with each user's iPod.

  • Acrobat and Distiller 5.0 on Windows 7. Is it possible to manage it to print on PDF or update it?

    I just installed the Acrobat and Distiller 5.0 on Windows 7. Is it possible to manage it to print on PDF? Or is it possible to update it to support Win 7?

    Hi NicoNeto,
    Acrobat 5.0 is not compatible with Windows 7. You need to purchase Acrobat XI as it is fully compatible with Windows 7 or later.
    http://www.adobe.com/products/acrobat.html?promoid=JOLIR

  • R12:Is it possible to Manage Tax for Expense purchases from iProcurement ?

    Hi,
    Is it possible to Manage Tax for Expense purchases from iProcurement. I don't see Manage Tax option in Iprocurement when I do the Checkout.
    Could anyone give some light on this ?

    Good news. I've found support note 552107.1 (How To Enable E-Business tax Functionality In Iprocurement Release 12) where support explains how to show tax parameters field in iProc requisition.
    But anyway like in PO in R12 You will be able only to select tax codes etc, but not the final Tax values. Because now eTax calculates it.
    BR, Eugene

  • Is it possible to manage the servers with RSAT in a different domain?

    Hi All,
    In our infrastructure, all the servers are in the domain A. But as per the organization policy, laptops are only allowed to join domain B, not allowed to join domain A. Is there a way to manage the domain A services (DC/DNS/DHCP/etc) with RSAT on laptops?
    As of now I'm only able to use RDP to log on every server in domain A every time.
    P.S. As of now most of the servers are Windows Server 2008 R2, and most of the workstations are Windows 7. There will be some new servers with Windows Server 2012 and Windows Server 2012 R2 OS in the future.
    Thanks,
    高麻雀

    Hi,
    As far as I know, we could only manage a remote server using RSAT in the same domain.
    Best Regards,
    Andy Qi
    Andy Qi
    TechNet Community Support

Maybe you are looking for

  • Traceroute timeouts and lots of packet loss when a...

    I host various site via the above, and since late last night and today, I am having connection timeout issues on all of them (but sites like bbc, bt etc are fine). I contacted them and performed a traceroute to my default site southee.co.uk which tim

  • Acrobat says document has no hyperlinks - but it does!

    I created a pdf from a Publisher document using Acrobat Standard 7.0.  There were hyperlinks created in the Publisher document but they don't work in the pdf document.  When I check links by using the Advanced tool and check for links in the document

  • Itunes and quicktime icons gone after update

    hi my friend and i both just recently updated our itunes to the latest and greatest version. now niether of us have icons for either prog. the are like a blank icon, just not the correct icon. sometimes when i click on the programs the icon appears b

  • WebVPN on 881 Router and Groups

    Hi there, i have an question and i hope anyone can help me. Is it possible on an Cisco Router to build WebVPN groups ? I want build one group for users with grand access rights.      --> Connect with anyconnect or Web Portal and have access to all Se

  • Add basic authentication like .httaccess in apache.

    Hi!, ¿how can I add basic authentication to servlet or Webservice in Weblogic like .httaccess (apache) protection? Thanks!!!!