Is it possible to Manage Sun Fire v60 without using Red Hat?

I've been trying to enable a console connection via an Avocent dongle connected to the serial port using these directions:
http://download.oracle.com/docs/cd/E19088-01/v65x.srvr/817-2025-13/chap2.html
All I've been able to view is the BIOS output, and the grub menu; I am unable to control anything.
Is it possible to manage a Sun Fire v60x without using a Red Hat server to issue power/status commands?
Thank you.

Hi.
Serial console support only text mode. So can freasing after server change mode to graphics.
For manage server You can read:
http://download.oracle.com/docs/cd/E19088-01/v65x.srvr/817-2025-13/chap1.html#pgfId-1014396
Lights Out Management (LOM)
The Intel Server Management (ISM) software is a set of applications and agents for monitoring and managing servers. The agents can act as low-level stand-alone pieces, or can be used in conjunction with full-featured integrated management suites.
Available features include power on, power off and reset. System Event Logs (SELs) and Sensor Data Records (SDRs) can be viewed remotely.
IMHO: It's very old server and remote control of it not user frendly.
Regards.

Similar Messages

How to flash bios on Sun Fire X2100 (without cd/dvd drive ) from solaris.

Hi I have the following problem. I need to udpdate bios in my sun fire x2100 (not the m2 version). Installed system on it is the latest solaris 10. I have also one laptop with sxce b107. I need to update bios to support zfs root/mirror.
Both devices are int the one subnet.
I download supplement cd from sun, but I was pretty amazed that there is available only remote update from rhel (32bit) or boot from cd/dvd drive.
Any help is welcome.
Lubos Kocman

1. If an OS is installed:
- log in as you described
- shutdown the server with `init 0`
- this should bring you to the OK prompt
- Insert the bootable system software CDROM into the CDROM drive
- On the OK prompt, type `boot cdrom`
2. If no OS is installed:
- connect to the serial management port with your PC (Hyperterminal)
-> NOTE: you will need a DB-25 Adapter (Part No. 530-2889)
connect this adapter to the serial port of your PC, then connect the adapter
with an RJ45 cable to the serial management port of the server
-> Serial Port Settings in Hyper Terminal:
Duplex: Full
Bit Rate: 9600
Parity: None
Databits: 8
Stopbit: 1
Flow Control: Xon/Xoff
VT100 Emulation (if applicable): ON
- change to the OK prompt by typing `break`
-> if this does not work, try `reset -x`
- make sure your OS Installation CDROM is in the drive
- at the OK prompt, type `boot cdrom`

Is it possible to run a java program without using the command prompt?

Hi,
I was wondering whether it is possible to run a Java program (not an applet) without using a command line in the command prompt?
Basically I want to run a program that will be continually running in the background and hence I don't want to have a command prompt screen loaded up as well - I just want the program to be running in the task bar.
I know how to run the program in the task bar - but I still need to launch the program from the command prompt - is there anyway I can get a program running without having to start it from the command prompt?
Cheers

Or create a desktop shortcut (in Windows) or an application launcher ( in Linux GUI).

Is it possible to group multiple columns individually without using union?

Hi, if I have a table with a numebr of columns I want to group eg gender, nationality, age and I want to produce a summary such like:
Group Count
Male 10
Female 23
British 19
Irish 14
18 10
etc.
Or even better:
Group Count
Gender-Male 10
Gender-Female 23
Nationaility-British 19
Nationality-Irish 14
Age-18 10
Is this possible without using loads of unions? I just want to do this in the best, most efficient way as the table involved has >100 million rows.
Many thanks
Jen :)

May be this
--Test data
with t
as
select 'M' gender, 'INDIAN' nationality, 25 age from dual union all
select 'M' gender, 'INDIAN' nationality, 25 age from dual union all
select 'M' gender, 'INDIAN' nationality, 30 age from dual union all
select 'M' gender, 'IRISH'   nationality, 30 age from dual union all
select 'M' gender, 'IRISH'   nationality, 40 age from dual union all
select 'F' gender, 'IRISH'   nationality, 40 age from dual union all
select 'F' gender, 'BRITISH' nationality, 50 age from dual union all
select 'F' gender, 'BRITISH' nationality, 50 age from dual union all
select 'F' gender, 'BRITISH' nationality, 45 age from dual union all
select 'F' gender, 'BRITISH' nationality, 45 age from dual
--Test Data Ends
-- Main Query
select decode(no, 1, 'Gender-', 2, 'Nationality-', 3, 'Age-') || decode(no, 1, gender, 2, nationality, 3, to_char(age)) val,
       count(*) cnt
from t
cross join (select level no from dual connect by level <= 3)
group by no, decode(no, 1, gender, 2, nationality, 3, to_char(age))
order by no;
VAL                                                  CNT
Gender-F                                               5
Gender-M                                               5
Nationality-BRITISH                                    4
Nationality-INDIAN                                     3
Nationality-IRISH                                      3
Age-25                                                 2
Age-30                                                 2
Age-40                                                 2
Age-45                                                 2
Age-50                                                 2
10 rows selected

HT1766 iPhone 4s; Is it possible to sync apps to icloud without using the touchscreen?

I've been using my iphone 4S with a cracked screen for over three months now (it fell on a tile floor hitting the top front corner first, 5 weeks after I got it) without any issues. Tonight I dropped it from a height of about 8 inches and the part of the face that was cracked made first contact with something that was on a table I was standing at, jamming it further into the phone. When I picked it up I noticed a small piece had also fallen out near an intersection of the cracks. The touchscreen is now completely black.
My question: Is it possible to sync my apps to the icloud without using the iphone touchscreen? I plan I getting a new phone and had my icloud setup to sync my mail, contacts and calendars. I've been able to download all my pictures and video to my computer.

Getting/reinstalling the apps isn't a problem. I'm only concerned with the data that is stored within them. For instance I have a mileage tracker I've been using but haven't uploaded the data from the phone to back it up anywhere. I'd like to do that before getting a new phone but I can't see what i'm doing due to the screen not working.
The phone is actually still working and I've been able to use Siri to make calls and send texts without a working screen. The screen still accepts inputs apparently so if I could return settings to factory settings I could theoretically use another phone side by side to show me exactly where I need to touch and when to back up my applications to iClould.
Going forward, I actually had ordered another case before my accident as my current case doesn't provide enough protection. It'd be nice if Apple actually made an iphone that didn't need such band-aids for normal usage.

Migrate 8163 on Sun to 920 on Unix Red Hat

My production database is currently running archive mode on Sun Solaris Sparc and is 8163. I have to move it to a new pair of servers running Unix Red Hat cluster and upgrade the database to 920.
I need your advices and expertise on the best way to do this with pros and cons.
Thanks
Lawrence

Thanks for that information. I have not attempted to run my application on a desktop developer copy of CF 10. That is a good suggestion. I will try that.
A new related question has come up:
Can ColdFusion 10 run under a VIRTUALIZED instance of Linux? This question assumes that CM 10 can run directly on “bare metal” that using a dedicated copy of Red Hat Linux. We are considering running CM 10 in a Cloud server farm where the Red Hat would be virtualized. Would that work?
Thanks,
Steve Price

Is it possible to import music into iPad without using iTunes?

Do any of of you know whether or not it is possible to import music into iPad, like when you can import pictures, without the use of iTunes ( I don't have a computer)? I have music on my phone and on USB flash drives. Thnx

If you are in America then you can download your past iTunes music purchases via the store (http://support.apple.com/kb/HT2519). But no, you can't import from flash drives (the camera connection kit can only import photos and videos) or from an iPhone.

Is it possible to turn off my 4s without using the sleep/wake button?mine has broken but prefer to turn off overnight and when in work

As above!

It's no possible to turn it off without the sleep/wake button. You can use the mute switch while at work and at night.

Is it possible to edit your site remotely, without using MobileMe?

...please tell me there's [free] a way to do this without MobileMe (which I believe is the awesome, though dreaded, $100/yr program offered by Apple)? Please let me know.

MobileMe has nothing do to with creating and editing a site with iWeb. but you do need a Mac computer running iWeb and have a current copy of the Domain.sites2 file that was used to create the site. If this is what you mean this online MacWorld article might be of interest: Managing an iWeb site from multiple Macs.
OT

Can a company can manage the controlling costs without using CONTROLLING

Can a Company can be managed without Controlling Module i.e., without Controlling Area, Cost Center and Cost Elements.
Can I get one simple example where a company can exist without any Controlling Area but only with FI side of Reporting.

You need to go with Funds Management for budgetary control, in case if you do not want to go with Controlling module.

Is it possible to create a PDF report without using BI Publisher?

Hi,
I need to create a report in pdf using APEX, but I don't have BI publisher and I am not interested in to buy it . Which is it the best way to solve my problem?
Thanks
Edited by: user13486053 on Jan 7, 2011 6:48 AM

Have your DBA install FOP and then find a good xml style sheet editor. Or have them install jasperreports and then use ireports to format them...
Thank you,
Tony Miller
Webster, TX
On the road of life...There are 'windshields', and there are 'bugs'
(splat!)
"Squeegees Wanted"
If this question is answered, please mark the thread as closed and assign points where earned..

Is it possible to just listening to music without using up data time off a plan?

I`m not quite sure on how to disable the phone setting id I am on wi-fi so that my data plan is not needlessly used up. I already have wireless in my home.
Also, if I just want to listen to music, there has to be a way the the phone/data usage does not tally up?
Iphone4s= yes....it is my first cell...OK OK

Sure thing. You can turn off your data under settings. And if you're just listening to your music app than it won't use data. If you're using an app like Pandora, than it would be using data. But your iPhone is smart enough to turn off data, only when there is a known wi-fi connection around. In the top left, it should show three waves for wi-fi, and a 3g when you're using 3g data.
Grats on your 4S purchase!

Is it possible to do a remote wipe without using Find my iPhone?

Ive had my macbook pro stolen in chile and I want to wipe it or at least lock it, but it appears the only way is thru find my iphone and I hadnt set it up on my laptop. Is there any way?? Please help. Thanks.

See: If you did not enable Find My iPhone on your missing device here > What to do if your iOS device is lost or stolen

Proper serial connections for Sun Fire v250

I recently purchased a (gently) used Sun Fire v250 for use as a workstation. The machine had a graphics card installed by a previous owner, but I accidentally reset the factory defaults on the SCC (I was having a boot problem, and apparently a brain problem).
My question is, how do I connect over serial to make the default boot up options 'screen' instead of 'ttya'? I know from the oracle docs that I need a specific type of serial cable, but I'm unsure where exactly I can go about finding this. Also, once I get the cable what software (for *NIX or windows) can I use to reset the SCC?
Thanks,
John Lambert
Dychron, Inc.

984429 wrote:
I recently purchased a (gently) used Sun Fire v250 for use as a workstation. The machine had a graphics card installed by a previous owner, but I accidentally reset the factory defaults on the SCC (I was having a boot problem, and apparently a brain problem).
My question is, how do I connect over serial to make the default boot up options 'screen' instead of 'ttya'? I know from the oracle docs that I need a specific type of serial cable, but I'm unsure where exactly I can go about finding this. Also, once I get the cable what software (for *NIX or windows) can I use to reset the SCC?
Thanks,
John Lambert
Dychron, Inc.Search for a cisco console cable .... this is a typically a 9 pin to RJ 45 ... usually less than say $10 on at least well known auction site.
If you laptop/desktop does not have a serial get a usb to serial converter as well.
If you have a linux desk OS then it is possible to connect to a serial connection ... from solaris you would use tip .... from linux typically use 'cu' (built it) ... if I remember correctly.
Or use recent versions of PuTTY from windows. ... which can also be configured for serial.

Is it possible to force 16/32-bit stack alignment without using the optimizer?

The compiler emits code targeted at the classic Pentium architecture for the -m32 memory model. I'm running into problems mixing Sun Studio compiled code with code built with other compilers because the other compiler builds under the assumption that the stack is 16-byte aligned.
The only way I've found to force Sun Studio to comply with that restriction is with -xarch={sse2a,sse3,...}, but this causes the code to pass through the optimizer. As noted in the documentation, if you want to avoid optimizations you must remove all flags that imply optimizations -- that is to say, there's no way to disable optimizations once enabled. This should not, however, be treated as an optimization because it's an ABI requirement.
I've scoured the documentation, spent many hours googling, digging through forums, and asking questions.
The best I've come up with is the -xarch option which is sub-optimal because it has side effects. I tried -xchip=pentium4 (this is what my other compilers have set as their default target), but the generated code doesn't force 16-byte stack alignment.
Is there a way to force the compiler to emit code conforming to a different ABI without using the optimizer?
-Brian

Thank you for your response.
I hope you won't mind my asking: do you have a way to prove that it's not possible to force 16-byte alignment without using the optimizer? I ask because your username / profile don't give the impression you work for Oracle, so while I think you're probably right it's at least possible that we're both mistaken. I haven't been able to find any documentation on either stack alignment or altering the targeted ABI short of using the -xarch flag, and even there the details are fairly sketchy.
-Brian

Is it possible to Manage Sun Fire v60 without using Red Hat?

Similar Messages

Maybe you are looking for