Is it possible to manage the servers with RSAT in a different domain?

Hi All,
In our infrastructure, all the servers are in the domain A. But as per the organization policy, laptops are only allowed to join domain B, not allowed to join domain A. Is there a way to manage the domain A services (DC/DNS/DHCP/etc) with RSAT on laptops?
As of now I'm only able to use RDP to log on every server in domain A every time.
P.S. As of now most of the servers are Windows Server 2008 R2, and most of the workstations are Windows 7. There will be some new servers with Windows Server 2012 and Windows Server 2012 R2 OS in the future.
Thanks,
高麻雀

Hi,
As far as I know, we could only manage a remote server using RSAT in the same domain.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Similar Messages

  • When a warranty replacement in hand, is it possible to change the 4s with 5 by extra fees?

    when a warranty replacement in hand, is it possible to change the 4s with 5 by extra fees?

    Sadly, life is sometimes unfair. Although, I'm not certain why you feel you would be entitled to any form of upgrade. It is neither stated nor implied in any Apple literature.

  • I have a touchscreen laptop running Windows 8.1. Is it possible to use the touchscreen with Firefox? I've installed Firefox but it only works with the mouse etc

    have a touchscreen laptop running Windows 8.1. Is it possible to use the touchscreen with Firefox? I've installed Firefox but it only works with the mouse etc

    Hello Sirving575, sorry but the metro version of firefox has been cancelled, see : https://blog.mozilla.org/futurereleases/2014/03/14/metro/
    thank you

  • Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure?

    Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure 1.2?

    SF300 series is targeted for support in  PI 2.0.

  • Possible to manage the MobileMe galleries made by iPhoto using Aperture3?

    I am considering moving my whole library from iPhoto to Aperture.
    I understand that I can import the whole iPhoto library, but is it also possible to manage the existing MobileMe galleries made by iPhoto using Aperture3, without changing the current URLs of the gallery?
    Thanks.

    I'd like some info on this also.
    Currently I have iphoto publishing photos to Facebook, Mobileme and Flickr. I have imported my iphoto library but none of these folders have imported. Is there a clever way of transferring these over to Aperture (3) such that my mobilem is unaffected as is my Flickr and facebook.
    Aperture 3 already see's my mobileme and I posted a new album to mobileme from Aperture wondering if that would force it to download the other albums on there already but it didn't. You would think there is a way to do this. Otherwise if I have to delete the links in iphoto to facebook and then repost them from Aperture they will show as completely new uploaded photos when a lot of them are years old and at a guess it will re-tag all my contacts who will all think there are new photos of them.
    Likewise will all my flickr comments be lost in the above process and will I effectively be starting from scratch again?
    Any thoughts, ideas, help and guidance would be very much appreciated. I'd like to get away from using both iphoto and Aperture to just using Aperture 3 now it has all the additional functionality of faces that I like to use.
    Thanks

  • I would like to ask if is possible to predict a future version of iOS can have the possibility to choose the color with which to write and be able to choose the character also...

    I would like to ask if is possible to predict a future version of iOS can have the possibility to choose the color with which to write and be able to choose the character also...

    Nobody here would have a crystal ball and know what Apple plans on doing in the furture.
    If you feel this feature is so important, you can let Apple know:
    www.apple.com/feedback

  • Is it possible to sync the iphone with my company's email server

    Is it possible to sync the iphone with my company's email server (Novell Groupwise)? I have the option of getting a blackberry or iphone. I want the iphone, but I also want to be able to sync it with my work email since I am away from the office a lot. I know I need to contact the IT department, but I thought I would try here to see what experiences people had with this sistuation. Thanks.

    Depends on what protocols they will allow (or can). If they open up POP or better yet IMAP access, then yes, sure. It is all about the protocols available to you (them). Though note, the iPhone checks on an interval where the Blackberry has emails pushed to it. So with iPhone, the min interval time is 15mins.
    Message was edited by: DaVBMan

  • Is it possible to pair the playbook with the BlackBerry Visor Mount Speakerphone VM-605?

    Can i listen to my music from my playbook with my
    vehicle's stereo system by using the Blackberry
    Visor Mount Spwakerphone VM-605?
    Is it possible to pair the playbook with the
    BlackBerry Visor Mount Speakerphone VM-605?

    From what I've seen here and @ Crackberry yes once you've gotten the 2.0 upgrade.
    Information Technology is fun! Play with IT.

  • Is it possible to connect the java with XL database

    Hi friends,
    Is it possible to connect the java with XL database.
    if it is possible can u send the detail for that .
    Thnax in Advance..............

    What the heck is a XL database?

  • CSM Is it possible to have the vserver (VIP) IP in a different subnet range

    CSM - Is it possible to have the vserver (VIP) IP in a different subnet range than the real IP addresses in the serverfarm that is bound to it?
    In other words, as an example a typical bridge configuration is like this:
    vlan 221 client
    ip address 10.20.220.2 255.255.255.0
    gateway 10.20.220.1
    vlan 220 server
    ip address 10.20.220.2 255.255.255.0
    <<<<<<<<<<<<Two VLANs with the same IP address are bridged together>>>>>>>>>>>>>>>>>.
    serverfarm WEBFARM
    nat server
    no nat client
    real 10.20.220.10
    inservice
    real 10.20.220.20
    inservice
    vserver WEB
    virtual 10.20.220.100 tcp www
    serverfarm WEBFARM
    persistent rebalance
    inservice
    ==================================================================================
    NOW:
    =====
    Is it possible to do something like this:
    ==================================================================================
    vlan 221 client
    ip address 10.20.220.2 255.255.255.0
    gateway 10.20.220.1
    vlan 220 server
    ip address 10.20.220.2 255.255.255.0
    <<<<<<<<<<<<Two VLANs with the same IP address are bridged together>>>>>>>>>>>>>>>>>.
    serverfarm WEBFARM
    nat server
    no nat client
    real 10.20.220.10
    inservice
    real 10.20.220.20
    inservice
    vserver WEB
    virtual 50.40.220.99 tcp www <<<<<<<<<< Place the IP address in a different subnet than the IP's in the serverfarm >>>>>>>>>>>>>>>
    serverfarm WEBFARM
    persistent rebalance
    inservice
    <<<<<<<<On the MSFC place a static route to route the 50.40.220.99 address towards the CSM IP on vlan 221>>>>>>>>>.
    ip route 50.40.220.99 255.255.255.255 10.20.220.2
    Please if somebody knows if this is or is not possible it would be highly appreciated to hear your feedback.

    Pointers to examples - much appreciated.

  • HT4814 Is it possible to manage the mac mini server with server app before set up?

    The article says using the server app I need to enter the IP address, then the Administrator name and password, but obviously on the first boot these are not configured yet. The article does not mention if this is possible or the server.app can only manage the server after its initial configuration using a monitor connected.

    From dim memory...  Load Server.app on the client box or use Server.app on some other handy server, and either configure DHCP with the server's MAC address (usually listed on the shipping box) and your intended static IP address and then boot the new target server box, or just boot the new target server box and use Bonjour Browser or the command-line dns-sd tool to find the IP address that the new server box has acquired from DHCP, and then in either case, connect to the new target server via Connect To Server in Server.app via its IP address, specify the root user and use the system serial number (again, usually listed on the shipping box) as the password.

  • Is it possible to run the vi with a button on the front panel?

    Hi to all,
    I was wondering if it is possible to run a vi with a button placed on the front panel.
    Regards,
    Palazzo

    Palazzo wrote:
    Run vi when opened is not useful in my application, I know that option, thanks.
    Can you elaborate? Programmed as a proper state machine, have the program run in an idle state that only waits for for a button press.
    There is no need ever to go to edit mode during execution of a finished program.
    while I have written a demo Xcontrol to show that everything is possible, I strongly recommend against it. It makes no sense.
    See here for the example and instructions. But please read the entire thread, though.
    LabVIEW Champion . Do more with less code and in less time .

  • Is it possible to Manage iOS apps with Lion Server

    I was wondering if anyone knows whether or not it's possible to manage (add and remove) iOS apps using Lion Server, specifically apps available via the app store rather than apps built for internal use? I can't seem to see a way of doing it using profile manager but was wondering if I was maybe missing something?
    Thanks

    The answer to this would appear to be no.

  • Is it Possible to Map the Transformations with already mapped ones

    Hi,
    I have a scenario :
    In my source DSO I have a infoobject 0BILL_NUM,which is mapped with ZB1_PRC in the destination datatarget.Here a routine has written on the destination infoobject ZB1_PRC for the follwing fields in the source system ZBILL_ITM,0COMP_CODE,0BILL_NUM.
    In the destination system 0BILL_NUM is mapped with 0REFER_ITM .
    In the target system a routine has wriiten for 0BILL_NUM
    for the fields 0COMP_CODE,0REFER_DOC,0REFER_ITM and 0BILL_NUM
    What is the solution to push my data into the target system,after mapping.
    Now Is tht possible to map two infoobjects 0BILL_NUM from the source to the target system infoobject 0BILL_NUM.If not possible, what is the alternative solution
    Regards
    Lucky

    hi,
    while creating the transformation u can find the option as rule group ok,
    first you can map as per the first requirement then in the rule group option u have new rule group there u can assign the second mapping along with other infoobject mappings.
    chk out the options in transformation -> rule group
    Ramesh

  • Is it possible to bind the elments with context node dynamically?

    Hi All,
    Is it possible to dynamically bind elements with context nodes?
    In other words, at runtime, can we change the binding of an Inputfield to another context. Or a table to programmatically bind to another table?
    Regards,
    urbashi

    hi urbashi.......
          it is possible..
           you should first pass the id of he ui element and then bind it.
           for ex:
             if there is an input field, you can get the attribute that is bound, using cl_wd_input_field->bound_value.
             if you want to set an attribute, use cl_wd_input_field->bind_value.
             the first one will give an idea of how a valueshould be given.
    ---regards,
       alex b justin

Maybe you are looking for

  • An authentication error has occured (Code: 0x607)

    Hi all, This one is driving me NUTS! The problem itself is when I go to connect to a session host using a web access server I get the error in the title.  This is only happening to some of my session hosts and not all.  I have compared them and can't

  • Problem in compiling EJB in examplesServer in weblogic server6.0

    Follwoing is the output of my program:-- C:\bea\wlserver6.0sp1\samples\examples\ejb\basic\statefulSession>javac -d Trad er.java TraderHome.java TradeResult.java ProcessingErrorException.java TraderHome.java:32: cannot resolve symbol symbol : class Tr

  • SP-3102 - Unable to make VOIP phone calls after switching router

    I had to change the router from Netgear (g) to Belkin N+ (n). Changed the SPA-3102 config to DHCP, it picked up an IP and showed the 1st 3 LEDs lit, status Registered. So, good news. I am able to receive VOIP phone calls, but not able to make phone c

  • Process integrator

    (For some reason I couldn't post this to weblogic.support.products) Hi Guys, I am trying to run the process integrator - just downloaded it and license from the downloads. I followed all instructions - and running wlpi.cmd it actually does start up,

  • Auto drop down for text field

    Hi All, I an trying to populate the list of names as and when i enter the first letter in text field,that is just enter a in text field n below that it should show the list of names starting with 'a' and i should be able to do multiple selection from