Is it possible to map the Ctrl Alt or Cmd keys to Midi CCs?

Basically i'm trying to use maschine in midi mode to do everything the keyboard does and just have the mouse next to it, but its kinda diffficult because i need the modifier keys. Is there any cheeky way to map buttons on a controller to the modifier keys?

No.

Similar Messages

To be able to edit images in ps from lr I have to launch lr with the ctrl, alt, and shift keys pressed in win 8.1.

This was the resolution by adobe techs. Was only supposed to be necessary for each catalog once if I check its integrity, but that turns out to not be the case. Don't even need the integrity check for this to work. (Uninstalling and reinstalling everything a couple of times didn't help.)
Fix, anyone?

Hi,
Since it works fine with same command in Windows 7, this issue may be caused by Windows 8.1 client side.
According to the error message, I find an blog for Exchange server side. For your reference:
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Just in case, please open IIS manager and switch to Default Web Site. Right-click Default Web Site, and then click Edit Bindings to double check the configuration for HTTP:
1. Make sure the value of Hostname is empty.
2. Ensure the port is 80.
For your question, I have test this command in Windows 8, it works fine.
Is there any extra software installed on it? please try to run Windows with clean boot, also we can try this within a new Windows.
Besides, please try to telnet port 5985 and manually open this port in firewall ports.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

The Ctrl+Alt+C shortcut isn't working in InDesign CS6.

The Ctrl+Alt+C shortcut isn't working in InDesign CS6. I don't have a ATI video card, so the hotkey it's not binded to the Catalyst Center.
I own a Nvidia GeForce GTX 980 video card and I have reinstalled Windows 7 x64 three weeks ago. Since then, the Ctrl+Alt+C shortcut isn't working.
I tried to reinstall the program. I tried to clean the preferences file. Still, nothing helped. I googled if there are any other programs that could take the shortcut to themselves. The InDesign menu says that the Ctrl+Alt+C is binded to the "Fit Object" action. But nothing happens.
If you have any suggestions on what should I do to repair this, please help.
P.S.: before the reinstall, everything worked just fine.
MB: ASUS P8Z77-V Deluxe
CPU: Intel® Core™ i7-3770 3.4GHz
GPU: NVIDIA GeForce GTX 980

No. But I think I figured it out somehow.
I just reinstalled the InDesign CS6 from scratch, as mentioned in the post above. Everything as new as possible. And it still had problems. Then I disabled two things from autostarting:
Broadcom 802.11 Network Adapter Wireless Network Tray Applet
and
Logitech SetPoint driver.
After that, everything went back to normal.
I assume one of them had grabbed the hotkey without mentioning it, so that must have been the fault. I don't think that other programs (other than Adobe's) have the same key bindings as InDesign.
P.S.: Just restarted each disabled program and it's the Broadcom 802.11 Network Adapter Wireless Network Tray Applet that shows issues with the keys.
So, thanks for trying to help me fix my problem.
If anybody else have troubles with the keys and they have this specific tray applet running, better disable it to be sure. In Windows Task Manager it is called WLTRAY.EXE.

Is it possible to map the cmp fields of the entity bean with out dictionary

Dear sirs,
I have created the EJB project module and WEB Module. Now i have to map the CMP fields of the entity bean to the underlying table. Is it possible to map the cmp fields of the entity bean with out java dictionary? If yes how can we do that.
I have got some error while mapping an EJB's CMP fields to the table through dictionary. I was actually intended to map 79 fields but it gives an error that more than 64 fields are not allowed while building the dictionary.
1. Can you tell me what could be the possible reason?
2. Is it possible to map the cmp fields of the entity bean with out java dictionary? If yes how can we do that.
Kindly helo me,
Sudheesh K S

Hi,
Sudheesh please check up if the below link helps,there are other ways of writing the persistent.xml for container managed entity bean.
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/f695f0c84acf46a4e0b31f69d8a9b7/frameset.htm, probably in the studio you cannot browse through tables not in the java dictionary,but manually editing it may still solve the problem.
Also here is another link that specifies the databases supported by J2EE Engine.
http://help.sap.com/saphelp_nw04s/helpdata/en/66/a5283eeb47b40be10000000a114084/frameset.htm
The below link shows how to specify the database vendor and datasource
http://help.sap.com/saphelp_nw04s/helpdata/en/e1/67fc3ee241ba28e10000000a114084/frameset.htm
Hope you are able to solve the problem.
Do let us know if you come up with the solution.
Regards,
Harish
Message was edited by: HARISH SUBRAMANIAN

CTRL, ALT and SHIFT keys are sticking (not physically)

I am having a problem with the T-61p I have been using for 2 years now.
About once every 2 days Windows thinks that either the CTRL, the ALT or the SHIFT key is held down. I only notice this when my mouse's left click or my arrow keys starts behaving funny (like opening dialogs when clicking on icons or highlighting text on a page in MS Word) instead of moving the cursor as they should.
When this starts happening, pressing the CTRL, ALT and SHIFT buttons causes the strange behavior to stop.
None of the keys are physically stuck down. I am using an external keyboard with my laptop closed and docked. I have tried switching keyboards, and I get the same results with brand new Logitech keyboards.
What could this be? Has anyone seen this problem before?
Your help is much appreciated.

Welcome to the forum!
It sounds like you've inadvertently turned on the Sticky Keys accessibility feature. Since you didn't mention which operating system you're using, I can't tell you how to turn it off. Trying searching for Sticky Keys in Help in the Start button menu.
Hope this helps!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Disable the CTRL+ALT+DELETE when log in xp T60

I have T60 and i just installed lenovo xp again, and every time i log in XP i need to press CTRL+ALT+DELETE, how i can get this uncomfortable think off?
I just want to sing by my fingerprint

You have to install the Thinkvantage Fingerprint Software, then configure it to act as the logn provider.
Remember, you can also set Single Sign On and enroll your prints then configure those speicifc fingers to allow BIOS logon and assuming you are starting thes ystesm ffom a cold boot, use the finger at bios, sit back and watch it logon to windows
IF YOU ARE HI SEC MODE / POSSIBLY EVERY OTHER MODE TOO AND YOU JUST RESTART FROM ONE WINDOWS SESSION TO ANOTTHER W/O POWERING OFF.... SSO doesn't apply and you will have to swipe at Windows logon.
A TIP, if a Thinkpad is configured for BIOS logon and the ThinkVantage Fingerprint software is removed or the entire OS is reinstalled....you can still makeshift a SSO:
1. Most likely, the thinkpad will preserve your BIOS biometric finerprint logon settings
2. Avoid resintalling the Thinkvantage finter software and use tweakui to set the Windows Autologn function. Since you've successfully used your fignerprint to start the laptop, it is still as secure as it would be if you had Windows Thinkvantage Finger soft installed but your SSO is now Windows provided but the user experience is the same and just as fast.
Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

What is an ergonomic placement of the 'Ctrl' & 'Alt' Keys

Is there a better idea than my observation below?
Which key is more frequently used with Microsoft Office during School days and in Work?
For me, the “Ctrl” key e.g. for “bold” or “undo” commands in Office software is frequent used.
Instead of moving you entire hand with more effort into a awkward position to execute the keyboard shortcuts, would reversing the position of “Ctrl” and “Alt” keys provide a least effort and more ergonomic way of executing Computer commands?
Photo: http://thinkingbots.com/post/34761053574/ctrl-key-versus-alt-key-on-flickr-via-f lickr

The following keys put the display to sleep and will prompt you for a password if you have enabled Require password [immediately] after sleep or screen saver begins under System Preferences > Security.

Is it possible to map the 'multimedia menu' on a s...

Hi all,
The multimedia key on my Nokia N79 is broken (nr 3 in the picture). My plan was to map the 'multimedia menu' functionality on the left selection key (nr 2). But the 'multimedia menu' doesn't appear in the list of possible mappings. It is also impossible to reach the 'multimedia menu' via the normal menu.
Conclusion: if the multimedia key is broken, it appears that it is impossible to use the 'multimedia menu'
Does anyone know a workaround? Or, if Nokia is reading this, can you add the 'multimedia menu' to the mapping-options for the selection keys?
Thanks in advance,
Jarown
Solved!
Go to Solution.
Attachments:
Screen shot 2010-03-18 at 09.04.27.png ‏56 KB

Hi,
I'm one step further again I mapped the left softkey (164) to my multimedia key (186) and it works! But now i realize that this mapping is active in ALL menu's.
Is it possible to only have this mapping only active when I'm in the main menu? Otherwise I'm not able to activate the 'options' menu, or press 'ok', which is under that button in most other cases.
Grz,
Jarown

Is it Possible to Map the Transformations with already mapped ones

Hi,
I have a scenario :
In my source DSO I have a infoobject 0BILL_NUM,which is mapped with ZB1_PRC in the destination datatarget.Here a routine has written on the destination infoobject ZB1_PRC for the follwing fields in the source system ZBILL_ITM,0COMP_CODE,0BILL_NUM.
In the destination system 0BILL_NUM is mapped with 0REFER_ITM .
In the target system a routine has wriiten for 0BILL_NUM
for the fields 0COMP_CODE,0REFER_DOC,0REFER_ITM and 0BILL_NUM
What is the solution to push my data into the target system,after mapping.
Now Is tht possible to map two infoobjects 0BILL_NUM from the source to the target system infoobject 0BILL_NUM.If not possible, what is the alternative solution
Regards
Lucky

hi,
while creating the transformation u can find the option as rule group ok,
first you can map as per the first requirement then in the rule group option u have new rule group there u can assign the second mapping along with other infoobject mappings.
chk out the options in transformation -> rule group
Ramesh

Config the [ctrl]-[alt]-[F..] being console, X, log ...

what i know:
in /etc/inittab you can set with
c1:2345:respawn:/sbin/agetty 38400 vc/1 linux
c2:2345:respawn:/sbin/agetty 38400 vc/2 linux
c3:2345:respawn:/sbin/agetty 38400 vc/3 linux
c4:2345:respawn:/sbin/agetty 38400 vc/4 linux
c5:2345:respawn:/sbin/agetty 38400 vc/5 linux
c6:2345:respawn:/sbin/agetty 38400 vc/6 linux
to have consoles at [F1] to [F6]
and when you start the X11 it will be at [F7]
what i wondered how to setup: (well maybe it's a little bit crazy to start more than one X, but i want to know if it is possible or not --- it should be possible)
1-> if i try to start another X, it cannot connect to :0.0 what is logical, because the first X is running there --- now, how (and where) can you config the behaviour of X11-servers that the second automatically runs on :0.1 (=usually [F8]) and the third on :0.2 (=usually [F9]) ?
// i know that this is possible on a UNIX ... should be possible also here, right?
2-> i want to have the system-log on [F12] ... how do i set this?
like the consoles in the /etc/inittab ?
thanx for sharing your knowledge with me :-)

You don't need to configure anything else :-) just start the second X with
startx -- :1
and it will be display :1
Note that display :0.1 would be a second graphic card with a second monitor IIRC
I once wrote a shell script that would let me start a number of X's automatically by looking through /tmp/.X11-unix/ to see which ones are available. They will be accessible by Alt-F8 and higher. I'm not sure you can force a certain virtual console, though.
There is one caveat, though. Only the first X you start (be it on display :0 or :1 or wherever) will have DRI, i.e. 3D acceleration.

Is it possible to upgrade the hard drive of my MacBook Pro Mid 2009?

I have a mid 09 MacBook Pro that has 250GB of hard drive space, and I was looking to upgrade it to something around 750GB to maybe even 1 terabyte. I've looked around and I'm afraid of getting the wrong model for my laptop, so is there any place or trusted website that I could go to to purchase this? What would be ideal would be to find something on Amazon I could use. Thanks!

Kappy's advice is spot on.
Mac123455 wrote:
What would be ideal would be to find something on Amazon I could use.
Determine the HDD you want to install and then check for the best price. Amazon is a good source.
Consider a Seagate SSHD (hybrid) which will boot and shut down your MBP much faster than a conventional HDD with only a modest increase in price.
Ciao.

My mini-mac is in guest mode. I can not exit this an return to administrator mode. I have tried unplugging from internet and all devices and restarting. Also used all the F keys and the Control, Alt. Delete keys and numerous other combinations. Help

Computer will not boot up to administrator page for sign in and password. It goes to Guest page where I can browse the internet with Yahoo, but can not connect to Safari. It does not show Dock with Applications at all; therefore I can not access network settings or any applications to get out of this mode. I have disconnected every thing connected to the mini-mac and left over night before reconnecting. Same problem as before; then used all F buttons to try to recover factory settings, again nothing help ! Used various combinations of Escape, Delete, Control and Alternate keys. Held D key down while restarting computer and nothing has worked for me at this time. Any suggestions would be appreciated at this time!

https://discussions.apple.com/message/17670442#17670442
https://discussions.apple.com/thread/3909284
http://apple.stackexchange.com/questions/95699/on-login-i-am-only-given-the-gues t-user-option-how-do-i-log-into-my-account

Opensource ATI can't switch video modes with CTRL+ALT+plus/minus

Hi,
I've updated my system to the new xorg-server and video driver.
The new video driver (xf86-video-ati-6.7.195-1) can't switch video modes with the CTRL+ALT+plus/minus key combination. I use this key combination a lot and before I upgraded to the new driver this worked :-(
Anybody else having this problem?
I know I can use xrandr to change the video mode, but it doesn't exactly do what I want. Xrandr changes the video mode, but also changes the resolution of the screen, while CTRL+ALT+plus/minus keeps the resolution intact (the screensize is bigger than what is seen on the monitor, you can scroll the screen by moving the mouse "out" of the monitor)
Is there a fix/patch that I can try?

It looks like this is the result of the new opensource ati drivers use the new xrandr.
One of the changes is that it will treat the screen section in xorg.conf differently. Browsing through video modes, using the CTRL+ALT+plus/minus key combination, that are defined in the screen section in xorg.conf is not possible anymore.

"." on the number pad is causing ctrl+alt+del feature

Hey everyone, I set up VirtualBox for someone in order to run Windows XP about a year ago. I'm not sure what changed but recently when they press the "." key on the number pad, it triggers the ctrl+alt+del feature. Thanks in advance for the help.
Steven.

VirtualBox > Preferences > Input might be a place to look.

Remapping the ctrl key

hi,
i am using LogMeIn Free for Mac to be able to remotely connect to my Mac from the outside world (typically from a PC). as i am starting to dabble in xcode, i have come across a problem: this utility doesnt seem to map the Control key. in the preferences of the app, you can choose to remap the Alt and Cmd keys to a Windows alternative, but nothing for Ctrl.
in xcode, i need to Control-click objects in order to link them. so the question is if its possible to add an additional keyboard shortcut on the Mac, to something the LogMeIn client will be able to handle?
alternatively, is it possible to programmatically create these "bindings"? all text that i am following so far uses the far simpler Ctrl-click method.
regards
jingo_man

Thanks for your reply Peter. I restored defaults, and restarted twice, but still nothing. Both keys work on an external keyboard, so I think that it's a mechanical fault. I'll send it back next week when this job has finished- let's hope that it's not part fo a faulty batch.

Is it possible to map the Ctrl Alt or Cmd keys to Midi CCs?

Similar Messages

Maybe you are looking for