Is it possible to merge clips so that you can put a transition over all of them?

I have a bunch of quick cuts which I want to fade to black over the clips. Can this be done easily within Final Cut or do I have to export the clips as one movie and then reimport them and then apply the transition?

andynick wrote:
My mistake - sorry.
As Jim and loyed256 said, you need to create a new project and paste your compound clip into it but it's still a very simple way to export a part of your storyline - unless you really have a down on FCP X, that is - then I suppose absolutely anything becomes too much of a chore.
Personally, I feel that the one or two minor inconvienisnces with FCP X are far, far outweighed by the massivie savings in time, as well as increased productivity and creativity - but obviously some don't appreciated that.
Andy
I guess this is one we'll have ot agree to disagree on. Starting a brand new project to cut and paste a piece of a sequence into just to export only a select from that sequence is more than a minor inconvincence in my eyes (and there's way more than one or two of them IMHO). I see many great things in FCPX but I also see many shortcomings, including many that make it doa for many jobs that I work on. "Massivie savings in time, as well as increased productivity and creativity" is all in the eye of the beholder and I can tell you I certainly haven't gotten that from FCPX and there's a lot of others who haven't either. If you have then that's great!

Similar Messages

I am so confused. I am thinking about buying an iPhone 4S but I want to use those card things that you can put the code in for the phone is this possible? I'm not talking about the 50$ unlimited card just the regular 20$ cards that hold mins and texts...

I am so confused. I am thinking about buying an iPhone 4S but I want to use those card things that you can put the code in for the phone is this possible? I'm not talking about the 50$ unlimited card just the regular 20$ cards that hold mins and texts... As long as it has the support for the service it's hooked up to?

As far as I know there is no US cell carrier that allows pay as you go with an iPhone. You can purchase an unlocked iPhone 4S at an Apple Store and try it with a non-supported carrier.

Crucial memory co says that you can put 16 g ram memory in the later 2011 macbook pro 17" 2.4 i7 quad core, True?

crucial memory co says that you can put 16 g ram memory in the later 2011 macbook pro 17" 2.4 i7 quad core, True?
DDR3 PC3-10600 • CL=9 • Unbuffered • NON-ECC • DDR3-1333 • 1.35V • 1024Meg x 64 • • Part #: CT3327381

nope - no difference than running with 4GB......Apps however, open much faster with 16GB....
you'll also have 0 page outs and 0 swap used...
see image...

Saving a website on the hard drive so that you can put it on another host

I just made a website and want to save it to my hard drive just in case everything crashes or there is a dispute with the host and then I will have the website ready to put on another host. For example, if the host decides they don't like my content they might just pull it off the web. I have heard it happen to people and they had to find another host. I don't think it will happen to me but you never know and I just want to have a copy so that if there is any dispute, I can have the website saved and ready to put up on another hosting account.
Can I just save it from the web using "Save file"? Will that save it in a form that's good enough for putting on another host? I can hire a designer to put it on the host if it takes a few extra programming steps, so long as I have the files saved .....
Or do I have to do something complicated like special save programs like
http://www.sitesucker.us/mac.html ?
I use Scrapbook add-on on Firefox to save the webpages I like just in case the site gets pulled down in the future. Is that the kind of thing I need? If that is all I need, can I use Scrapbook to save my website?
Will it save all the information to restore the website on another host exactly as it appears? My website has been coded with HTML/CSS. I don't think there is much PHP.
I am not sure about databases. My website is simply selling a service so I don't keep a database I think or just a minimal one. The customer fills out a form and the information goes to my email address. And the information on my website doesn't change. It isn't a blog that I am adding information to constantly. It just has links for navigating to different pages on the same website. It doesn't have links that point to other websites. There are no fancy files like movies etc.
I just want something to save my website so that I or an experienced web person can easily put it back up on another host.
I use Snow Leopard 6.0 by the way. I haven't upgraded to Snow Leopard 6.3 because there were a lot of problems when I did that in the past. So I went back to Snow Leopard 6.0. (It's been good so far so I think I will stay with it.)

I didn't make it. I gave the psd design to a web designer and gave him instructions to make it using CSS as I heard CSS web pages load faster. He said he wouldn't use database programming languages like php or MySquareL or whatever they're called because he said I didn't need them and he would charge me a lot more for that, so I said just make it with CSS/HTML. I think he's a PC guy, not a mac guy. He's a professional designer and he made my website from scratch from my designs, not with a website builder.
He hasn't put it on the host yet though he's just about to. I did a search about backing up your website and one website said that some hosts allow you to backup the website using cPanel or something like that. I don't know whether my host has that or not. My host account is very cheap like $16 a year so I don't think there are any special features to the hosting account.

Is there protection from viruses and hackers that you can put on IPad 2?

Is there a protection program against hackers and viruses for Ipad2 ?

I am constantly having my account hacked, I have to keep changing my password every few days, and constantly receiving emails from Apple ( or a fake Apple site) either telling me to reset my password or my password has been reset. I know that I had not changes my password in a few days but today I received yet another email to say my password had been changes, I had not changed it but of course I had to then change again. I am getting sick of Apples lack of security. I was thing of buying a Mac book but I am completely out off now as worried about security issues. I wanted to report these security issues to Apple but unable to find how to do this so if anyone knows please let me know.

HT201359 What happens if you don't have a credit card, or gift etc, I left my address for the bills to come there. Do you get a bill in the mail, that you can pay by BPay over the phone?

Does anyone know, if you don't have a credit card, iTunes card or similar, and you have given your postal address as the billing address, do your bills come there, and then you pay for them via BPay or similar?

You cannot buy something without a credit card or an itunes git card.

Is it possible to create a link that I can place on a website to an internet radio stream on iTunes?

Is it possible to create a link that I can place on a website to an internet radio stream on iTunes?

Yes, but it WON'T play through the browser. It'll require any visitor who clicks it to have iTunes installed, and it'll open iTunes as soon as they do.

Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

The same cuts that I have in this clip that i performed with the blade tool, I want to duplicate, copye, paste and apply to another clip. I want the cuts to mimic and be an exact same. I wish i could highlight the clip, click copy and then highlight the other clip and then click paste and the cuts apply.

Is it possible to stream music to multiple sets of speakers via airplay direct from iphone4s on ios7 in the same way that you can in iTunes

Is it possible to stream music to multiple sets of speakers via airplay direct from iphone4s on ios7 in the same way that you can in iTunes / Remote?
I know this can be achieved by the remote app.
Airplay functionality appears only to support 1 set of speakers at a time?

Hockeyfanatic wrote:
Does anyone know how or if it's possible to stream my music from the iPhone to iTunes via bluetooth or wifi? Essentially I want to share the iPhone's library with iTunes (I know one can go the other way).
Here's why: I'd like to stream my music at work to my computer's speakers without taking the phone out of my pocket. I obviously don't have my home music collection on my company computer. And I figure if I place the phone on my desk to plug it in and play through iTunes, I could easily walk off without the phone. That would be bad (out of contact) and potentially sad (stolen).
It seems right now the only bluetooth connection to a computer is for the remote application.
Wait until November. Airplay/Airtunes iOS 4.2 announced for iPhone to iTunes/iTV. If you want a BT audio stream now, you can add a dongle to the PC for headset streaming.
As far as WiFi file transfer iPhone to iTunes, you can't. There's talks on it but nothing concrete. Except JB.

TS1398 Is it possible to lose the wifi settings so that you can't connect?

Is it possible to lose the Wi-Fi settings so that you can't connect?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Is it possible to block AirPort so that people can't have access to sharing Wi-Fi including the administrator?

In the company many people are sharing wi-fi threw Imac/ Macbook. I would like a solution for this problem. What can I do?
Thanks,
Gabriel Tonin

If you are using an Apple AirPort router, like the AirPort Express, AirPort Extreme, or Time Capsule.....the products pictured below.....the only way that you can limit users from connecting is by setting up what is known as Timed Access on the network.
If you are using one of these products to provide the wireless network there, post back if want a few more details about Timed Access.

Really stupid that you can't drag and drop photos from Finder into Events

There is no way in iPhoto to do what I want and need to to, to wit, drag and drop photos from the Finder into existing iPhoto Events.
It really doesn't make sense that you can't do this. First of all, calling these groups Events to begin with is not smart; in my case, a group of photos in a folder on the Finder is rarely all from one photo session or so-called "event"--- instead of Events they should just be called Groups or something, and you should be able to drop individual photos into them. I have thousands of family photos that were accumulated on my hard drives over the years, some scanned in from film negatives, slides, or prints, others from digital cameras, and when I have changed Macs and hard drives over the years, every time a folder of photos was moved from an old hard drive to a new one, or regrouped into various folders, the photos seem to have acquired new dates of origin, etc.
Anyway, what I mean is, if Events are all time based, then somebody like me who has thousands of photos with all sorts of dates of origin, mostly unrelated to the date that the photo was actually shot, is screwed. I have old photos with new dates of origin and other mismatches between photos and the dates when they were actually shot or scanned.
My gripe is, again, that when I find photos on my hard drives that belong in certain iPhoto Events that have already been created, I cannot just drag these photos from the Finder and drop them into the Events they belong in. Instead, the stupid program creates a new Event from each photo I try to drop into an existing Event. That means I have to chase these new photos all over the place inside of iPhoto, trying to figure out where each new photo (now called an "Event") has ended up, so that I can drag and merge it into the Event I wanted it to go into in the first place. A real pain in the neck. It simply takes too long to do this for each photo added.
What this means is that iPhoto is not going to be a practical way to organize for a person like me until Apple makes it possible to simply drop any photo from the Finder into an existing Event. There should be an option to allow that. I'm really surprised there is not one. <edited out by Hosts>
Tom

Tom, iPhoto will not overwrite photos with the same name. I have plenty of photos with the same name in the same event. Each photo most likely has an internal handler that manages the photo, and not just the name of the file.
I agree with you that this is sub-optimal, and (IMO) I think what happened is iPhoto 6 had rolls, and they came up with a really cool interface for mousing over those rolls, and decided it was more consumer friendly (and because film is a thing of the past) to call them events, rather than rolls. I think it was worth a shot, but they just slightly missed.
Right now in iPhoto08, any serious organization is done in folders and albums. Personally, I think they need to combine the two concepts -- the great "mouse over" view of events with the organization abilities of folders and albums. I'd like an albums view where I can mouse over the albums. Actually, Aperture 2's interface for organization is more functional than iPhoto, so I am hoping some of that benefit creeps into the next iPhoto release.
What I do is: I use events for high level grouping (like Winter 2007) and I organize folders and albums to break that down further ("trip to Montreal" "Christmas" etc.). But I do it backwards. I fill albums first, then I organize events.
When I drag in pictures to iPhoto, first I make the target album in iPhoto that I want to populate, then I drag the photo directly to that album (not to events). iPhoto automatically puts the photo into the album I created and also into a new event. Later, I go into events, right-click on this new event to "open event in separate window" then I move around the events view, to drop in the pictures from the "import" event I just created. If I move all the pictures into other events, iPhoto automatically deletes the event I just emptied. You could skip the event organization all together if you wanted to, but you'd lose the cool mouse-over feature, which can be handy.
One nice thing about having events AND albums is you can have the photo just once in iPhoto, in an event, but then have the photo appear in as many albums as you want (as well as projects and web galleries) all while only having one photo on your hard drive. So, there are benefits to events, but I think iPhoto is missing just a couple little bits of organizational ability to make it perfect. (and yes, I've submitted this all to Apple as feature requests)
Just in case you don't know -- events don't have any hierarchy. That is, you can't nest events. But you can have folders with subfolders, and any folder can contain albums. Albums cannot have sub-albums, and folders don't hold photos. Only albums hold photos, and folders (or sub-folders) hold albums. Try create some folders and albums and you'll get the hang of it. One other issue that Apple needs to address. When you create a new folder or album, it doesn't put it right where you want it, but rather puts it at the bottom of the list, so you have to drag it up to where you want it. Try it out, and you'll see what I mean, then submit it as a feature request to improve that.
I agree it's not perfect, but it's not too bad once you get used to it. And the benefits of working with the rest of the features of iPhoto is worth it. I'm just really hoping they do a few tweaks on the next release. They are near greatness here. They could just use a little nudge on the last bits. (in my opinion of course. Others may disagree, but I've talked to enough people who have the same issues you are having to know we are not alone on this).

My laptop recently crashed and is unsalvagable with my itunes library on it. My ipod touch has all of my music still on it. Is there a way that I can put the songs on my ipod onto itunes on my new computer??

My laptop recently crashed and is unsalvageable with my itunes library on it. My ipod still has all of my music still on it.
Is there a way that I can put the songs on my ipod onto itunes on my new computer without loosing them or having to buy them all over again?

Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your iPod for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device

HT5030 whem installing itunes i get this message "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"

whem installing itunes on my mums new computer which is windows 7 i get this message everytime "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"

Let's check your Windows system.
1. Have you done all the important windows updates and service Packs on your system. If not do it now. START button, type in Windows Update and ENTER. Select 'CHECK FOR UPDATES'
2. Let's check your Windows system files for possible file corruption
SCAN and repair possible Windows system file corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
3. Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

How do you add non-Garage band instruments into a Logic project so that you can hear them on playback?

How do you add non-Garage band instruments (orchestral instruments) into a Logic Pro (8) project so that you can hear those insrtruments' sounds on playback? I've tried to understand and follow the Logic Pro 8 User Manual, but the process comes off as so complex and the writing so technical that it does not help but only confuses.
To be precise - I want to add instruments (orchestral) that are not offered in the current Garage band menu which is offered in the Mixer's channel strip menus for Logic Pro 8. To be clear, the instruments that are offered are Bass / Drum Kits / Guitars / Mallets / Organs / Pianos and Keyboards / Synth Basics / Synth Leads / Synth Pads. Most of these that I've tried seem to work and give their characteristic sound when placed in a particular channel and playback is clicked.
However - there is one orchestra instrument offered in the standard Logic Pro 8 Mixer channel menu and it's the item labelled "Performance - 000 flute 1 or 001 flute 1." And it is this instrument that presents a problem. When I click on it and choose it from the menu and enter it as the instrument of choice for a specfic channel / track in my Logic Pro project arrangement, when playing back the music for the overall piece this particular track, the flute, does not playback and produce the notes (Midi events) in the track in the sound of the flute. Instead, nothing comes out at all. I can't imagine why this does not work. Any ideas, anyone? Again, when choosing this instrument for a track and clicking the playback no flute sound is forthcoming. Why not? I have not tried them all, but when most of the other various types of keyboards, such as an electric piano or an organ, are chosen for a track the playback successfully renders the sound of these instruments. Why then does playback not produce the sound of the flute when it has clearly been chosen to play and sound the Midi events given it?
Anyway, the overall, larger issue for me is the inability I have to choose and get non-Garageband instruments (largely orchestral) to play the Midi events given on various tracks. If my guess is correct then technically, orchestral instruments not offered in the standard Logic Pro 8 Garageband Mixer channel menu are referred to as external Midi sampled instruments - still, IMHO the process is not clearly spelled out in the User Manual. The simple step by step process whereby a non-Garage band instrument, say an orchestral instrument, is placed in a channel replete with Midi event (notes) waiting to be played should be easy, logical and given in a simple to follow format, but is not.
What with all the talk of routes, busses, auxillary channels, GM devices, GM mixers, audio bins, libraries and audio files this Logic Pro User is confused to the max. Can someone please help me and, in simple English, describe the step by step process whereby presumably external sampled orchestral instruments can be successfully employed, in any given Logic Pro arrangement project, to render their characteristic sounds upon playback?
On my two Macs, one a laptop and one a much larger Mac, I have any number of the GSO (Garritan Symphony Orceshtra) and Vienna Symphony Orchestra instrument library samples - and yet - I've yet to figure out how to actually get them INTO a Logic Pro project of any kind! To put this as a question, even as a humble request, how can I make good use of these orchestral sample libraries in a Logic Pro project? Can someone steer my to a clear resolution of this issue. I'd sincerely appreciate it! Thanks all!
DavidBacon

DavidBacon wrote:
Anyway, the overall, larger issue for me is the inability I have to choose and get non-Garageband instruments (largely orchestral) to play the Midi events given on various tracks. If my guess is correct then technically, orchestral instruments not offered in the standard Logic Pro 8 Garageband Mixer channel menu are referred to as external Midi sampled instruments - still, IMHO the process is not clearly spelled out in the User Manual. The simple step by step process whereby a non-Garage band instrument, say an orchestral instrument, is placed in a channel replete with Midi event (notes) waiting to be played should be easy, logical and given in a simple to follow format, but is not.
What with all the talk of routes, busses, auxillary channels, GM devices, GM mixers, audio bins, libraries and audio files this Logic Pro User is confused to the max.
David, you understand that this is professional software and is not necessarily meant to be easy but is in fact designed to give the professional user as many choices as possible, that's why it's in the Pro Apps section. You WILL need to learn about buses, GM Devices, Audio Bins, Libraries...etc..etc if you intend to use Logic.
That said, you are looking in the wrong place in the channel strip.
May I offer you advice?
Go here:
http://documentation.apple.com/en/logicpro/
Open "Exploring Logic Pro" (a short PDF Document). Pay special attention to chapter 3. Also pay special attention to the included graphics of the channel strips.
I encourage you to read the whole document as it will clear up many things... even though it's a Logic 9 document.
Post back

Is it possible to merge clips so that you can put a transition over all of them?

Similar Messages

Maybe you are looking for