Is it possible to micro step using the Pci7314 (open loop) controller and umi7764 and Labview.
Is it possible to micro step using the Pci7314 (open loop) controller, umi7764 and Labview. if so how would this be set up. i have searched the valuemotion vi libraries and found no microstepping functions. Please could you offer any advice. cheers JON ROGERS
Hi Jon,
Micro-stepping is a property of the motor amplifier (motor drive) rather than the controller. It sounds like you are using a 3rd party drive, since you have a UMI. You want to check with your motor amplifier documentation to see if it's supported. Usually, there will be dip-switches on the drive that sets the microstep factor.
Hope this helps. Please let me know if you have any questions.
Thanks,
Ken Sun
Applications Engineering
National Instruments
Similar Messages
-
Creating LabVIEW module adapter TestStand Steps using the API without loading module prototype???
Is it possible to programatically create a TestStand step (using the API), that calls a LabVIEW module, without loading the prototype of the module to get a reference to the Module Parameters.
I want to specify a VI Pathname, but I dont want to use that pathname to load the prototype. I want to programatically specify the name, type, representation etc. of each of the controls and indicators.
My reason for attempting this is that I only want the VIs called by the steps to exist on the target hardware not on the numerous development machines running my application.
Any thoughts greatly appreciated.
Steve
https://decibel.ni.com/content/blogs/DailyCLADHi Steve,
Unfortunatly it is not possible to do what you want within Test Stand but I am not sure why it is necessary, I think I am understanding your application incorrectly. The only time you will need to load the prototype is if you are creating the step but if you are creating the step you will need the VI that the step calls so that VI will need to be present on the system. If you are not calling the step then you shouldn't need to load the VI prototype. If this is how you program funtions it may be a problem with your architecture but if not please could you correct my misunderstanding so that I can go about finding a suitable solution.
Regards,
Tom
Applications Engineer
National Instruments UK & Ireland -
It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.What?
You want to control iTunes on your computer using the Remote app on your iPad?
And you want to connect the iPad and computer through your Nokia?
No, this will not work.
Just create a network with your notebook. -
I am very used to using a PC for Photoshop and just recently changed to Mac. I tried plugging in a different but the keyboard shortcuts arent like Windows version
shldr2thewheel wrote:
Since you have a mac, learn how to use Photoshop for Mac and stop thinking about Windows. Time to let go and learn how to use programs for Mac.
This is pretty horrible advice. 95% of Photoshop works the same on Mac and PC. Almost all of the keyboard shortcuts are identical except that Ctrl becomes Command and Alt becomes Option (same key anyway). The menus are all the same.
shldr2thewheel wrote:
Also, when using PS on a Mac, their is no option to enable "windows keyboard mode" in OS X. I know, I have used PS on a PC and currently use it on a Mac. You have no option but to learn how to use it on a Mac. If you are comfortable with Windows, purchase a copy of Windows and run it in Boot Camp or a virtual machine and purchase a copy of PS for windows. Then when in Windows, I believe you can use MS shortcuts.
This is also (mostly) incorrect advice.
If you look in the Keyboard system preference, and you click Keyboard Shortcuts, you will find a shortcut called "Move focus to the menu bar." Once this happens, you can type ahead to menus and commands, much like the alt menu shortcuts in Windows. If you wanted to open the Duplicate command, it would be Ctrl-F2 to activate the menu bar (edit that shortcut if you don't like it), then type I and Enter to drop the Image menu, then type D and Enter to open Duplicate. If there were two D commands, you would type ahead until the letters are different. You can use the spacebar instead of Enter, and Esc does the same as Windows. I just tried all this in CS5 and it works fine. The advantage over Windows is that you do not need to memorize the alt shortcuts, because it's based on the command name you want instead of an arbitrary letter in the middle of the name.
As jasdril said, you can simply edit the direct shortcuts too. But in most cases there should be no need to because as I said, most are the same anyway.
In short, there is plenty of keyboard-driven flexibility there for anyone willing to adapt just a little tiny bit.
The second advice that is not so good is recommending a Windows virtual machine. That'll slow down Photoshop, in addition to using up a lot of RAM and CPU that Photoshop really needs. The Mac version of Photoshop being native, would run at a proper speed.
The last possibly bad decision in this thread is TTro787 deciding to take the Mac back to the store, ignoring a quarter century of history of the Mac as a well-established graphic design and photo workstation. If you don't think the Mac is going to work well for Photoshop, it isn't going to be because of the Mac... the Mac is not just for Starbucks posers. Too many smart scientists (who want to use the Unix-based OS) and competent designers use Macs.
In short there is a whole lot of intolerance and assumed differences in this thread by both Mac and Windows zealots, which is too bad. Photoshop is mostly the same on Mac and Windows unless you're trying really hard to make it not work. -
Is possible for me to use the wireless connection from my Macbook Pro
Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?
Yes. Just use internet sharing on your MacBook Pro.
-
I have an ipod touch 4 gen.Is it possible for me to use the internet with bluetooth?
I have an apple ipod 4 gen.Is it possible for me to use the internet using bluetooth?helpp!!!
Yes but only to tether to an iPhone. The iPhone must have the optional tethering data plan.
-
How to use the same bean from Jsp and Servlet
I want to use the same bean instance from both the servlet and jsp.
for eg. if a create a bean using the jsp:useBean in servlet and if a modify some values, that values should be reflected while i access the same bean from the servlet. But instead of that the servlet is creating a new instance of the bean.
is it possible?
Thanks in advanceHi,
When you call jsp:useBean you inform a scope (session, request, page...)
This means the bean instance will be stored in that scope.
So, if the informed scope is session, then, in the servlet you could get the bean instance back from the session, this way:
HttpSession session = request.getSession();
Bean b = (Bean) session.getAttribute("bean_id");
Regards,
Filipe Fedalto -
I can no longer use the keyboard shortcuts, 'command C' and 'command V'. Did I inadvertently do something to my keyboard or computer that caused this? Is there a way to fix it?
You can also check in System Preferences > Keyboard > Keyboard Shortcuts, make sure that custom shortcuts were not created using those same commands. If ones were, they could be creating a conflict. Step throuogh each of the items in the left list, checking the array presented in the right pane for each.
-
I plan to purchase a Mac mini and then a new iPad. Can I use the iPad as a keyboard and screen for the Mac mini, using either the USB connector or Wi-Fi?
I'm sorry, I should have said thru Bluetooth, not Wi-Fi. I want to use the mini as a base station and the iPad like a laptop that I can sync when I'm home and carry with me when I travel. Is is possible to hook these 2 up - iPad/mini, through Bluetooth? I understand I need to use a regular monitor/keyboard/mouse on the initial install.
-
My kids are up all night streaming Netflix and using the WiFi on their iPads and Apple TV. The next day they don't want to get up and go to school. Is there a way I can set up a separate access point for just the kids in AirPort Extreme and then turn that one off when i go to bed? Or somehow turn off the main network when I go to bed, without having to reconfigure the entire router the next day, and then simply turn it back on the next morning? I have to keep the Guest Network up as I have a paying tenant living in an apartment over my garage that uses that network.
In the event it's not possible with the AirPort Extreme, any other suggestions would be appreciated.
Thanks in advance.You can configure the AirPort Extreme for Timed Access using the AirPort Utility. Basically what you are doing is restricting the time of a wireless device by its MAC address has access to the base station's wireless network.
To access this feature: AirPort Utility > Select the Extreme > Edit > Network tab > Enable Access Control: Timed Access Control... -
I used the ctrl+fn+f1 keys and now all new folders created include all desktop items
I have now made it so that all new folders now have all desktop items in them. I used the control+fn+f1 keys and it created this problem, I tried un-doing it by using those same keys again, but it doesn't work. Wondering if anyone else has run into this problem, if it can be fixed and if so, how?
Thanks in advance for your imput.You may not have created a mess, it's possible you simply don't know where your data is after migrating. Had you followed the Setup Assistant's on-screen prompts when you initially turned on your new system you would be running just fine by now. My guess is you haven't been exposed to Pondini's Lion Setup Assistant tips.
Migration Assistant (MA) and Setup Assistant (SA) are cousins, similar but different. The primary difference is MA creates a new user account which can be confusing to some users. If you successfuly migrated then log out of your existing using account and you should see the new user account. Log into that account then you should see the migrated data. If you do then use Pondini's Transferring files from one User Account to another.
However if you have totally made of mess out of things then I'd start over, this time using the Setup Assistant Tips beginning where he discusses Second Chance. -
I tried using the Voice Memos iPhone app and ended up with a red banner on top of the screen that flashes "recording 00.00" but I can't locate what I thought I was recording. can you help me?
jacknilI found an answer to this on another page (I was having the same problem) This worked for me:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
more here: https://discussions.apple.com/thread/5596831 -
How do I use the adjustment brush to mask and not turn my item green?
I have shot some products for my web site. I need completely white backgrounds. I have tried to mask the product and lighten the whites, but when I click done, my product has turned very green.
Why? How do you use the brush? Also, where is the invert to make this easier on me?
Kind of urgent, I need to get these items on my site already.
I know the answer is simple... I just don't know what it is.
ThanksHave you tried without the adjustment brush, by simply adjusting white balance from the basic tab in develop?
Click on the eye dropper tool and then click on a neutral gray color. Use the background if it is neutral rather than white. You may need to keep selecting the eye dropper to click in a few different places for best results.
If you decide to use the adjustment brush you can show or hide the mask. Uncheck the mask when you have finished painting; then use the sliders, starting with tint and temperature. -
How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?
No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.
-
I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!
Hi T,
Either of these will give you the info you seek:
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
Maybe you are looking for
-
Just receive an unlocked 3gs iphone from a family member and can't unlock the screen. Can't restore iphone because of error message.Now what do I do?
-
I am using 64 bit JRE. My application uses JDBC-ODBC bridge. With 32 bit JRE and 32 bit ODBC drivers, my application works fine. But, with 64 bit JRE, 64 bit ODBC drivers and using JDBC-ODBC bridge, I get the following error : ld.so.1: java: fatal: r
-
Created a report that executes 3 stored procedures: first one deletes data from a tablex second one adds data to tablex based on a query third one adds data to tablex based on different query report is run based on a date range. date range1 returns p
-
How do I create a PDF document/convert an Appleworks 6 document into PDF format? iMac Power PC G3 350MHz Mac OS X (10.4.7) Appleworks 6.2.9
-
Hallo Developer, I have a problem with a search help even built. It should be present a default value in the search help, for who however can be changed. A customer should be valid. The customer can have different Stati. Some Stati mean, which is val