Is it possible to mix down to a wav file

I only seem to be able to mix to an mp3.
Thanks.

dora jar wrote:
Is it possible to mix down to a wav file
no, you have to convert the export:
http://www.bulletsandbones.com/GB/GBFAQ.html#converttowav
(Let the page FULLY load. The link to your answer is at the top of your screen)
(uncompressed would be best)

Similar Messages

Mixing Down Multiple Tracks - Question

Hi.
Is it possible to mix down 2 or more tracks into 1 single track?
I'm doing some soundtrack work, working on the multi-track editor to a video I imported. I have a constant background ambiance that I made using the multi-track editor and the apple loops.
Is there a way I can mix the 3+ tracks that make up this ambiance down into 1 single track? Thus giving me less tracks to worry about (and less clutter) when editing additional foley sound effects etc.. over the ambiance?
Any help would be appreciated

Export your mix. In the After Export drop-down you should find *Add to New Tracks in session* (or something like that)
!http://rdiv.com/screenshots/STP_exportOption.jpg!

Down load wave files into GarageBand

I want to down load a wave file into GarageBand. I.e Jamey arbesold play along cd. I want to create a cd using a pre recorded play along. Has any one done this? Mtuut nm

Adding audio sample to GarageBand
Connect the iPad, select it in the left-hand column, open the Apps tab, scroll down to File Sharing, select GarageBand, add files with the button or drag and drop onto the file area. Files should be uncompressed audio in AIFF, WAV, CAF or Apple Loops format at 16bit, 44.1 kHz.
Insert audio sample into song
Open song in GarageBand on iPad, if needed switch to Tracks view or stop if playing, use the loops tool, audio files section, to insert your audio...
tt2

Can I mix down to 32 bit at a higher sample rate than 44.1 kHz ?

When I use Ableton Live, it lets me choose 16, 24, or 32 bit, and then I can choose a sample rate all the way up to 192000. Is this possible in Audition ? I have been going through all the preferences and all the tabs and I can't find this option. All I find is a convert option, or the adjust option. But that's not what I want. I want to mix down this way.
The closest thing I found is when I go to "Export Audio Mix Down", I can select 32 bit. Then there is a box for sample rate, with all the different values. But it won't allow me to change it from 44100.

JimMcMahon85 wrote:
Can someone explain this process in laymens terms:
http://www.izotope.com/products/audio/ozone/OzoneDitheringGuide.pdf ---> specifically Section: VIII "Don't believe the hype"
I don't read graphs well, can someone put in laymens terms how to do this test, step by step, and where do i get a pure sinewave to import into audition in the first place??
UNbelievable: So I have to first run visual tests using a sinewave to make sure dither is working properly, then do listening tests with different types of dither to hear which I like best on my source material, and then for different source material it's best to use different types of dither techniques???... Am I getting this right???...
Hmm... you only need to run tests and do all that crap if you are completely paranoid. Visual tests prove nothing in terms of what you want to put on a CD - unless it's test tones, of course. For the vast majority of use, any form of dither at all is so much better than no dither that it simply doesn't matter. At the extreme risk of upsetting the vast majority of users, I'd say that dither is more critical if you are reproducing wide dynamic range acoustic material than anything produced synthetically in a studio - simply because the extremely compressed nature of most commercial music means that even the reverb tails drop off into noise before you get to the dither level. And that's one of the main points really - if the noise floor of your recording is at, say, -80dB then you simply won't be hearing the effects of dither, whatever form it takes - because that noise is doing the dithering for you. So you'd only ever hear the effect of LSB dither (what MBIT+, etc. does) when you do a fade to the 16-bit absolute zero at the end of your track.
Second point: you cannot dither a 32-bit Floating Point recording, under any circumstances at all. You can only dither a recording if it's stored in an integer-based format - like the 16-bit files that go on a CD. Technically then, you can dither a 24-bit recording - although there wouldn't be any point, because the dither would be at a level which was impossible to reproduce on real-world electronics - which would promptly swamp the entire effect you were listening for with its own noise anyway. Bottom line - the only signals you need to dither are the 16-bit ones on the file you use for creating CD copies. And you should only dither once - hence the seemingly strange instructions in the Ozone guide about turning off the Audition dither when you save the converted copy. The basic idea is that you apply the dither to the 32-bit file during the truncation process - and that's dithered the file (albeit 'virtually') just the once. Now if you do the final file conversion in Audition, you need to make sure the dithering is turned off during the process, otherwise all the good work that Ozone did is undone. What you need to do is to transfer the Ozone dithering at the 16-bit level directly to a 16-bit file proper, without anything else interfering with it at all. So what you do with Ozone is to do the dithering to your master file, and save that as something else - don't leave the master file like that at all. After saving it, undo the changes to the original, in fact - otherwise it's effectively not a file you could use to generate a master with a greater-than-16-bit depth from any more, because it will all have been truncated. Small point, but easy to overlook!
just what's the easiest way to test if a simple dithering setting is
working for 32-bit down to 16-bit in Audition?... Why is there no info
about dithering from 32 bit to 16 bit (which is better then dithering
from 24-bit isn't it)?
I hope that the answers to at least some of this are clearer now, but just to reiterate: The easiest way to test if its working is to burn a CD with your material on it, and at the end of a track, turn the volume right up. If it fades away smoothly to absolute zero on a system with lower noise than the CD produces then the dither has worked. If you hear a strange sort-of 'crunchy' noise at the final point, then it hasn't. There is info about the 32 to 16-bit dithering process in the Ozone manual, but you probably didn't understand it, and the reason that there's nothing worth talking about in the Audition manual is because it's pretty useless. Earlier versions of it were better, but Adobe didn't seem to like that too much, so it's been systematically denuded of useful information over the releases. Don't ask me why; I don't know what the official answer to the manual situation is at all, except that manuals are expensive to print, and have also to be compatible with the file format for the help files - which are essentially identical to it.
Part of the answer will undoubtedly be that Audition is a 'professional' product, and that 'professionals' should know all this stuff already, therefore the manual only really has to be a list of available functions, and not how to use them. I don't like that approach very much - there's no baseline definition of what a 'professional' should know (or even how they should behave...), and it's an unrealistic view of the people that use Audition anyway. Many of them would regard themselves as professional journalists, or whatever, but they still have to use the software, despite knowing very little about it technically. For these people, and probably a lot of others, the manual sucks big time.
It's all about educating people in the end - and as you are in the process of discovering, all education causes brain damage - otherwise it hasn't worked.

Mixing down tracks within a GB project

Hi Guys. Here's a question that I cannot work out (perhaps because it's not possible??)
How do you mix down 3 or 4 tracks into one, as we used to do in the days analogue mixing. eg, I have a nearly completed project, but decide to add a string quartet composed on 4 tracks - one for each instrument, but would like to mix it down to one track to make it easier to move/copy etc
Regards
Iain
ibook G4 Mac OS X (10.4.8)

Make sure to keep a copy of your orchestral GarageBand project. You may not be happy with the mix when everything is completed.
There should be no reason to mix down the tracks, however. GarageBand 3 will automatically make a Software track into a Real track by just "locking" the track. This will save you CPU cycles if this is an issue. That way you will still have control over the mix parameters.

Itunes mix down file too big?

Greetings from the bayou,
I am trying to e-mail a band mate a mix of a song from GB in itunes. I didn't notice this before, but the file is 24.3 MB. Is there a way/program or a setting in itunes to compress these files to meet my 10MB limit. Also, I would like to give some direction on the other end for him to open it in windows/itunes if possible. Should I store these songs in such a large file format for that matter? Mix down to itunes then transfer to smaller file size, then delete large files...
Thanks for your time,
-deltonfoster
Powerbook G4 15" 1.67 1GB Ram Mac OS X (10.4.4) PreSonus FirePod, icontrol, Maxtor 200GB-HD

Is there a way/program or a
setting in itunes to compress these files to meet my 10MB limit.
http://www.thehangtime.com/gb/gbfaq2.html#converttomp3
Should I store these
songs in such a large file format for that matter?
That's up to you. The uncompressed AIFF files are of the highest quality, but you can always make another mixdown from the GB file if you want to.
--HangTime [Will Compute for Food] B-|>

Startling error messages when trying to bounce my final mixes down.

Friends, Im nervous about this one as I've logged in 100+ hours and dropped a little bit of $ for off-site recording.
When Im ready to "send songs to disk", an error message pops up saying "GarageBand found 2 audio files in 8-bit format" "This format is unsupported and can not be played back" with an OK" option. After pressing OK, it proceeds to mix down but saves nowehere on my comp (or drive).
After restarting and trying to reopen the session, Im given this error message: "This file type is not supported and gives me the truly horrible option of "abort". Then it gives me the error message again.
It then gives me the original error message once more: "GarageBand found 2 audio files in 8-bit format" "This format is unsupported and can not be played back" with an OK" option. After I press it, it gives me that same message again for good measure and now the session is up.
But I cant save it and I cant send a mix anywhere. So Im pretty screwed?
We did a little off-site recording and imported those files Sunday, but Ive been working on it for a few days before these glitches came through.
HELP!
Im on a brand new MacBook OSX10.9 with Garage Band !! 6.0.5

Thank you, Leonie for replying.
So I went to the contents of the file and took the problem files out.
It immediatley pops up a error saying that a track was not found. "Audio File "guiro.wav" not found"
Obviously, since the track for guiro is still there.
But as I tried to move on, I still got a ""GarageBand found 1 audio file in 8-bit format" before I could get to the session and start deleting them.
As I began doing just that, that same ol' error message popped up fpr every move and then when I finished, it still wouldnt save anything saying..."The document 'SongFour.band' could not be saved.

KO88:Not possible to post down payment clearing. There are no down payments

Hi,
We are doing Full Settlement of an order in TCode KO88. There are few Down payments against a PO. Initially, system gave an error as follows: -
You cannot post comp.retirement for asset 120002 0 with this trans.type
    Message no. AA341
Diagnosis
    A down payment was posted to asset 120002 0. In depreciation area 01, if
    not elsewhere, all down payments were not cleared.
Procedure
    Before posting a complete retirement on this asset, you have to first
    clear the down payment in all depreciation areas.
We cleared the down payments and ran KO88 again, but a new error popped as given below.
Not possible to post down payment clearing. There are no down payments.
    Message no. AA571
Any help will be acclaimed.
Regards,
CMC Team
Edited by: CMC Team on Jan 18, 2012 2:59 PM
Edited by: CMC Team on Jan 18, 2012 3:01 PM

Friend,
Probably you did not take the trouble to search the SAP Oss for notes on this error message.
Please search for 'AA571' in the notes section of SAP oss and you will find several notes addressing the exact issue you are having.
For your convenience.
www.service.sap.com/notes
Best regards,
Vishal Thakur.

Not possible to post down payment clearing. There are no down payments:CJ88

Hi Experts,
When I settle WBS Element cost to the Asset Under Construction using transaction CJ88, I receive following error.
AA571 Not possible to post down payment clearing. There are no down payments.
Please help.
Thank You.

Hi,
first please check if the message AA 571 is right:
- Please check table ANLC. If ANLC-KANZA + ANLC-ANSAZ < 0    AA 571
- Check asset values (AW01N, ANEP, ANLC) and find out where the negative down payments come from (tty 180, 181)
However, in some cases a negative down payment balance cannot be avoided (for example through translation differences in foreign currency areas). This is the problem of AA 571. Sometimes it is not justified. For this
cases we have the following note:
860038 Error AA571 not justified
Using SM30, for the T100S table, create an entry for the message
class AA, message number 571, allowed message type "AEW" and
standard message type "E". Select the entry as 'Switch off'.
If when you post to a fixed asset the down payments are negative, or
become negative through the posting, you continue to receive an error as
a default with these changes.
Recommended procedure:
o Change this message to a warning message for one or several
       special users. This user should then be used to post to any such
       fixed asset that has down payments that are already negative or
       become negative through posting.
o This should only be permitted in the cases where a negative down
       payment balance cannot be avoided due to foreign currency
       rounding.
regards Bernhard
Edited by: Bernhard Kirchner on Feb 11, 2011 9:27 AM

Error: Not possible to post down payment clearing.There are no down payment

Hi expert,
I am running a settlement for an internal order and encounter the following error message.
"Not possible to post down payment clearing. There are no down payments."
Message no. AA571
When checked on the vendor, the invoice has been cleared in the same month before the settlement. Under the Internal order line items, there is still an unsettled amount of the invoice.
This internal order settles to an AUC asset. Previous month settlement was ok. Only problem with december.
The downpayment acct is currently zero.
Is there something wrong with the message table, or the posting of the vendor invoice ? Anything to do with the special GL indicator ?
Kindly advise what is the cause and the method to resolved this asap.
Thanks.
Angel.

Hi Angel ,
My client also getting error message while doing settlement(T.C.KO88) even though Note.8600038 applied.
Error Message:Not Possible to post down payment clearing .There are no down payments.
Message: AA571
If your issue is solved.
please can you tell how did you solve this issue.
Thanks,

Error message when mixing down audio

Hi gang
I occasionally get an error message when mixing down audio on a FCP 5.1.4 project. Message sez: File error: the specified is open and in use by this or another application.
I've never seen this before. No other applications are open at the time this message comes up.
thanks for any clarification.
Craig

Thanks for your reply. No . . . and if I try a bit later in the project, it seems to render the audio fine. Maybe I'll just trash my prefs and see what happens.
Craig

E not possible to post down payment clearing.

Dear all sap guru's
iam getting this meg:
could you explaine me?
document XXXX E not possible to post down payment clearing. there are no downpayment.
regs
laks

Hi Lakshmi,
Give some clarity for your issue.
Which t.code ur using
and check it downpayment is in the open item or not.
giv me the reply i will update you

Solaris 10 u11 : Is it possible to mix IPMP with vertual network interface

Hi
I have a system with 4 Ethernet interfaces , I'd like to try to have virtual network interface on two of them . then configure IPMP between each two.
- Is it possible to mix IPMP and VNIC ?
- online , I found posts about having vnic on solaris by creating additional interface file (ex, /etc/hostname.bge0:1 ) and also the IPMP create such interface?
- How can I know which IPMP version installed on the system ? and how to know I'm reading the right configuration guide?
- on what basis should i choose the type of IPMP for my system (Link-based or Probe-based)
Thanks in advance
HEBA

Hi.
IPMP can coexist with VNIC.
IPMP - part of Solaris. So you not need check version of IPMP. Just read Docs for Solaris.
http://docs.oracle.com/cd/E23823_01/html/816-4554/ipmptm-1.html#scrolltoc
It's not clear what Vnic you plan use. Is it VLAN or just additional IP on interface ?
For test address of IPMP you should configure interface like bge0:1 with additional options.
Regards.

Is there a way to mix down your tracks into one so you can have more tracks to use

Is there a way to mix down your tracks into one so you can have more tracks to use

Here is my tutorial to bounce tracks
http://ipad.slapwagon.co.uk/
some quality is lost due to export compression, but it's bareable considering you don't need to connect to a pc or use itunes...
cheers
@zorin

Why when mixing down video, audio gets panned to left?

I don't know why it happens. I've checked and it's not panned at all before the mix down/render. Any help?

I think it figured it out. If you're doing a stereo project but have the project set to Surround it will mix down with an odd pan to the left. Just an FYI.
I fixed the project properties and now it mixed down with no pan.

Is it possible to mix down to a wav file

Similar Messages

Maybe you are looking for