Is it possible to model mac-mini M815 install a second hard drive?

Hi all!
Tell me whether, you can install a second hard drive, such as SSD or plain and you need to do?
My model mac-mini M815 with 500GB hard drive.

Standard Hard Drive:
500 GB (5400 RPM)
Int. HD Interface:
Serial ATA (6 Gb/s) x2
Details:
This model also can be equipped with a 750 GB, 7200 RPM hard drive for an additional US$150. A second hard drive or SSD also can be installed, although it is not formally supported. Also see: How do you upgrade the hard drive(s) in the Aluminum "Unibody" Mac mini models? What type of hard drive(s) do they support?
From Everymac.com.
For the Mac Mini MC815LL of 2011.
If this is not your model have a look here to find it and confirm what can be done.

Similar Messages

Mac Mini server not showing second hard drive

early 2009 mini server suddenly won't show the second hard drive for time machine. All I get in the system profiler is this?
Is my hard drive toast or is there any idea out there of how to recover it?
Thanks for the help! Running 10.6.8 server by the way.

Maybe the connector to the HD come loose. That happend abount a month ago on my 2009 Mini

Mac Mini won't read external hard drive

Hello, I have an external Toshiba hard drive and my Mac Mini will not read it. It was originally used on Windows. I plugged the hard drive into my Macbook and it worked as a read-only device. I can take stuff off of it but can not write stuff onto it on my Macbook. I want to use it so I can back up files on my Mac Mini, but it will not read it. I know I have to format it to make it writable with Mac, but I want to make it a read only device on my Mac Mini because I want to back up all the data already on it and my Mac Mini has 400gb of its hard drive available. How can I get my Mac Mini to read the Hard Drive?

If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Boot into Recovery and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the System Management Controller
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

Whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

Check out > OS X Lion: How to use Migration Assistant to transfer files from another Mac

HT1338 My Mac Mini stopped recognising Iomega external hard drive via USB 2.0 connection. Any suggestion to get way around? Thanks.

How can I make my Mac mini recognise again iomega external hard drive, if it has stopped to do so?
many thanks.

[USB and FireWire Quick Assist|http://support.apple.com/kb/HT1151]
[Common fixes for USB device issues (unrecognized, etc.)|http://www.macfixit.com/article.php?story=20070824012114701]
[What to do if your computer won't recognize a FireWire or USB device|http://support.apple.com/kb/HT1317]

What is the best hard drive replacement for a first generation mac mini 1.25 mhz 40gb hard drive 1gb ram year 2005

What is the best hard drive replacement for a first generation mac mini 1.25 40 gb hard drive 1 gb ram year 2005?

You posted this same question 24 hours ago, which has a reply. Did you have questions on that answer or did you want further discussion? You could reply to that thread, there's no need to start a new thread.

I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it.

I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it and I need to back up the files and then restore the hard drive. But I can't open the hard drive to move the files onto the new one!
Help me please. I am not very technical so please answer as if I have no clue!! This hard drive has my iPhoto on it and all my pictures of my son, wedding and my current photography course so I desperate to get it back!
Any help will he appreciated!

disk0s2: I/O error.
disk0s2: I/O error.
The MBP's disk is damaged and requires replacement.
Genius Bar Reservations: http://www.apple.com/retail/geniusbar/

Using Mac Mini, Time Machine and External Hard Drives as a Backup Server

Hello...
I own a graphic design studio and have been looking for a long time to create/buy a no-thinker backup system for my macs. I have 4 workstations that I would like to backup to one central "server".
So what I was thinking was buying a Mac Mini, 3-4 external USB 2.0 Hard drives, external Blu-Ray burner and upgrade all our systems to OS 10.5. What I need to know is, will each work station with Time Machine on it back up across the network to a specific drive on the Mac Mini? If I have each workstation automatically mount one external across the network onto the desktop, will Time Machine recognize that hard drive as a legitimate drive to backup to?
Having the external Blu-Ray disc burner will give me the ability to burn data to a disc so I will have a way to take some of my information off-site. Since we are a graphic design studio, we use large amounts of disc space and regular DVD-R (4.6 gigs) is just not enough to back up some projects.
Can someone enlighten me, and tell me if this would work or not. It's the only way I can see me creating something that has enough space, will back up automatically across the network and allow me to make off-site copies of my data without spending $5,000.00.
Thanks for any comments you might have on this topic.
-SoupGFX

I'm a member of a freelance graphic artist team and have been scraping by with my MacMini and CS3. I recently obtained a used iMac (approx. 2 years old) and, instead of painstakingly transferring everything left on the Mini to the iMac, I wanted to know if it's possible to turn the MacMini into a pseudo external hard drive using the FW800 port.
I already had an external attached to the Mini and plan on using that as well, but I tend to hoarde information and run out of space really quickly. So keeping the mini around, preferably in a way that I can access it as an external through my iMac, would be perfect. I have very little experience with networking and don't have a wireless connection (yay modem cables!) so I don't quite know how to figure this out.
Has anyone done this? Would a FireWire 800 work? Would I need to set up a network between the two and use them as independently connected computers?

Mac mini vs. Lacie Ethernet Hard Drive

So I just got a new Lacie Ethernet Disk mini that I'll be hooking up to my router. I also have a "spare" Mac mini that I thought about using as a file server. Both would just be connected to the router.
Which do you think would be faster in terms of access speeds? The Mac mini or the Lacie drive?
Ultimately I'll just be storing/accessing things like photos and design files.

Welcome to Apple Discussions!
It can be done, but it's a very VERY expensive way of adding an external drive. Far better to sell it and buy a much less expensive external drive with far greater capacity and faster speed.
However, if you do with to do this, connect the two with a firewire cable, and with the iMac already running, boot the mini while holding the T key until the mini appears as a drive, mounted on the iMac desktop. That's firewire target disk mode.

My mac mini quit recognizing the external hard drive i am using for time machine.

I have an IOMEGA external hard drive hooked up to my mini for Time Machine. It was working for about 4 months then quit. The PC will not recognize the hard drive and I have switched usb cables and tried different ports to no avail. Any help would be gladly appreciated!!

Yes, that will work fine. It will back up normally once you plug it in again. I do this with my MacBook.

In Regards to Installing a Second Hard Drive in a p6-2133w Model.

Now, before you commence with a "Hey! This has already been posted, that model doesn't have a second cage to support a hard drive!"; know that a cage isn't too important for me. I simply want to clone my drive, remove the old one (it is failing), and then swap in the new drive into the cage. Normally a cage or other containment unit would be highly recommended for containing two drives, but seeing as how I have little intention of leaving the other drive in for more than a few hours, I think it will be OK.
All I need to know is how to intall these two drives, From what I have read the master drive (the one that came with the PC and is failing) should be on the first numerical SATA ports. By default there are obviously two cables in the SATA ports, one in Port 1 connecting to the hard drive itself, and one on Port 3 (above Port 1) connecting to the CD/DVD drive. So basically I am asking how do I re-arrange this so the default drive is the master drive, and the second drive is a slave drive? Is it even possible?
Thanks in advance.

Hi,
If the hard drive is failing then how do you expect to reliably cone it to another hard drive? There is no way for predicting that the cone will not be corrupted.
Replace the hard drive and use the external HP recovery media. Then use your backups to restore your data.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Power mac g4 MDD put a second hard drive in it and wont boot up with it in

hi i have a second 150g hard drive i just put in my powermac and it will not boot up with it im kinda new to this which is why i bought an a MDD to **** with but i probably shouldnt have done this but i booted the computer up with out the new hard drive plugged in and then plugged it in and its just sitting their with the color wheel going i picked the harddrive up off ebay and it says it will work on a mac is their something im missing here

HI there, likely it's just the Jumper settings on the New HD, set it to Cable Select or Slave if it's in the middle of the cable & the Other one has Jumpers set to Master.

Mac Pro Slower after adding second hard drive

My work computer is a Mac Pro 3,1 running Lion 10.7.3 with 4GB RAM and a 1TB hard drive. It was performing well running programs like Adobe CS5 and Final Cut Pro until I added a second 1TB drive (Western Digital WD1001FALS). After that upgrade Photoshop is way slower while programs like InDesign and Final Cut are noticable slower.
Is there any reason for this? Anything that can be done outside of a memory upgrade?

Let me try to direct you to some tips on CS5, and suggest that more hard drives properly used (OS, scratch, data, backup, array) can help, but that one drive and 4GB RAM is under performing.
Optimize Photoshop CS5
Optimizing Photoshop Overview
Adobe Photoshop FAQ
Optimize performance Photoshop
What are you using the WD1001FALS for? data? scratch?
And open Activity Monitor and check pageouts. Unless your use if very very light, I can't see that as being enough for even CS5 code and some OS X let alone any more apps.
Activity Monitor memory usage

How can I access Address Book data from an older version of the application to transfer it to a newer version of Mac OS running on a second hard drive on the same MDD G4?

I installed a hard drive from one PowerPC Dual 1.25 GHz MDD into another one with an older version of the OS X. all my Address Book data are on the older hard drive, from which I now boot the computer. When I launch Address Book as an app on the hard drive with the newer version of the OS, I get an error message that says I cannot run the version of Address Book from the older hard drive on the newer OS. How can I access the data on the older hard drive version of the Address Book app so that I can transfer it to the newer version of the app on the boot drive? The "Import" functionality will not work. I will be grateful for any help I can get. I would also like to uninstall the older version of OS X from the older hard drive.

Boot from the older version of OSX, then in AB use the File>Export>Export vCard after selecting all in AB.
Then boot from the new OSx & use the new AB to import that VCF file.

My late 2012 mac mini boots slow with new ssd drive

So here is the situation. I purchased a 128gb ssd drive, installed it a usb enclosure, formatted it to Mac OS Extended (Journaled), cloned it with carbon copy cloner 3, used the option key during boot up and selected the ssd drive and it booted my mac mini and it functioned perfectly. I than tested it for dozens of reboots and it worked fine. I then took apart my mac mini and removed the original hard drive and installed the new ssd drive. When I boot to the ssd drive it still takes 47 to 53 seconds just like the old drive. Aren't ssd drives supposed to be a lot faster?
My solution or tip is as follows; The reason it takes so long to boot is because the mac mini doesn't know you replaced the old drive and it is looking for it during the boot process. Finally it can't find the drive so it boots to the ssd drive. All you have to do to correct this is click on "system preferences", select and click on "startup disk" and select your ssd drive and click on "restart". After these steps your mac mini will now boot in about 17 seconds. Issues solved.

Yes, my solution fixed the issue. I went from a 47 to 53 second boot time to a 17 second boot time. The ssd drive is significantly faster than the original drive that came with my late 2012 mac-mini. This is my first post and I wasn't sure how to post this as a tip. I have another tip regarding usb 3.0 hubs.

Is it possible to model mac-mini M815 install a second hard drive?

Similar Messages

Maybe you are looking for