Is it possible to move existing WROKBOOKS to STANDARD folder

Hi ,.
Is it possible move existing WROKBOOKS that are saved in the ADHOC Role Folder by department to the STANDRD Role Folder by department.
i.e. change the path of the workbook by replacing ADHOC with STANARD.
Otherwise the only option would be to SAVE AS each workbook manually from the existing ADHOC location and saving it to the new STANDRD location.
Please suggest
Best Regards,
kranti

no, you can't do it. remote backups use sparse bundles and directly attached ones don't. you'll have to start a new backup sequence to back up remotely.

Similar Messages

Is it possible to move Multiple playlists into a Folder at once?

I have hundreds upon hundreds of playlists dating back years. As a non forward thinker I've created most of the in the 'root' of the Music Library.
I'm attempting to organize into Playlist Folders & the one at a time drag n drop is a little tedious. Any way to select/move multiple playlists at once?
Thanks in advance!

You can't select multiple playlists. It should be possible to move them into or between playlist folders by way of a script, but I suspect that is just exchanging one laborious task for another.
tt2

HT1491 Hi, i have recently brought some tv shows on my ipod touch. I can only watch them when i'm connected to the internet.............why? Also is it possible to move them to my music folder? Thanks

Hi, I have recently brought some tv programmes from itunes on my ipod touch. I can only watch them when i'm connected to the internet though. Any way i can move them to my music folder too? Thanks

That means it is not fully downloaded so you are streaming it. Fully download it.

Is it possible to move a Time Machine backup folder?

I have been using Time Machine with an external drive connected to my iMac via FireWire. Today I connected the external drive to my network using my AirPort Extreme via the USB port. The drive is no longer directly connected to my iMac
When I setup my Time Machine to back to the new drive location, it created a new backup set.
Question: would it have been possible for me to move my old time machine backup folder someplace so that I could continue backing up rather than having to create a new backup folder?

no, you can't do it. remote backups use sparse bundles and directly attached ones don't. you'll have to start a new backup sequence to back up remotely.

I followed directions of arrowing down and hitting delete, but cannot get certain addresses out of by address/location bar. What am I doing wrong? I also have not been able to figure out how to move existing bookmarks into folders.

I am running Windows Vista, Firefox 3.6.13, on a 18 month old HP a6700f. I read the embedded help, but the instructions for deleting addresses doesn't work and it doesn't tell how to move existing bookmarks to a folder.

See:
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
Entries in the location bar drop down list with a yellow (blue on Mac) star at the right end are bookmarks.<br />
You can remove such a bookmarked item that shows in the list if you open that url in a tab and click the yellow star in the location bar.<br />
This will open the Edit This Bookmark dialog and you can click the Remove button to remove the bookmark if you want to remove such a bookmarked entry.<br />
* [[Clearing Location bar history]]
* [[Cannot clear Location bar history]]

HT1710 If I click archive and install and it says moves existing system files to a folder named previous system , will this save my photos tol

I have to restore my Mac mini and i want to click on archive and install and it says it will move existing files to a folder but I need to know wether my photos will be moved too because I have 5 years worth of photos on there. If my photos will not be moved could I take it too a store and they could put them onto a USB stick for me.

"Archive and install" is an option in early versions of OS X installers. It moves some parts of the previous system to a folder called "Previous System" and installs the new OS.
There is also an option to presever user data and settings. See this document. http://support.apple.com/kb/ht1710
If you have 5 years' worth of photos and you do not want to lose them, then you NEED to have a backup. Hard drives can fail. Suddenly. Particularly on aging hardware. Computers can get stolen, set on fire or have drinks spilt over them.
If you do not have a backup, you should EXPECT to lose your files.
You should not need a store to make a copy of your files. Get an external drive, or use DVDs and move the files in the Finder. If you're using Leopard already, then you have Time Machine.

Is it possible to move to Alwayson Availability groups from existing sql server FCI ?

Is it possible to move to Alwayson Availability groups from? existing sql server FCI ?
If yes, how to move and what are the pre-requisites?

Hi Rahul,
Based on your description, we need to verify if you want to move from Failover Cluster Instances(FCI) and database mirroring to SQL Server Alwayson Availability groups. If so, it is possible.
You can review the following articles to get more detailed information about this kind of migration.
How To: Migrate from Failover Cluster Instances and Database Mirroring to SQL Server AlwaysOn
– Part 1
How To: Migrate from Failover Cluster Instances and Database Mirroring to SQL Server AlwaysOn
– Part 2
Thanks,
Lydia Zhang

Is it possible to move photos in an event into a smart album?

Is it possible to move photos in an existing event into a smart album?

Put another way:
No. An Event is a place. A Smart Album isn't a place, it's a list. It's the answer to a Question: "What are all the photos with this keyword?" "What are all the Photos with this date?"
So, nothing in a Smart Album is moved. It remains in it's original location and is simply listed in the Album.
Regards
TD

HT1751 Question: Is it possible to move just part of my iTunes content (i.e. TV shows) to an external harddrive, keeping the rest of the content in place? Several seasons of TV shows are taking up 102 GB of space, and I'm completely out of space on my HD

Is it possible to move just part of my iTunes content (i.e., only TV shows), keeping the rest of the Library in place? I have purchased several seasons of some TV shows, which take up 102 GB on my harddrive, inside my iTunes Media Folder. I don't want to move my entire Library of music and apps etc to the external harddrive (HD), but I rarely watch the TV shows, so wouldn't mind them being located on an external HD, which I would plug in before trying to watch the shows through iTunes?
Any advice?
Thanks!

I don't think you can simultaneously have two libraries open. But you can have your media spread across multiple disk drives. Just change your iTunes preferences such that the option "Copy files to iTunes Music folder when adding to library" is not selected. That way, new items can remain on your external drive if that's where you add them from.
The only caution is if you ever add items to your library from some "temporary" location, such as a USB drive. With these preference changes, iTunes would keep the native file on the USB drive, which would possibly lead to you deleting the file and losing the link. So, when you have your preferences to allow you to add new items to iTunes without copying them to the iTunes Music folder, you would want to put the native files in the desired location first, then add to iTunes.
To move existing videos and podcasts to the external drive, you can either do that as you have been (moving the native files and correcting the ! warning), or simply delete them from the library (but keep the native files) then re-add them from their new location on the external drive (you'd lose play history and ratings though, but may not be an issue for videos and podcasts).

Move existing Learning Object or Test

Hi,
Is it possible to move an existing Learning Object or Test into a new Learning Object thus creating a nested structure? From the thread "OLM - Merging Multiple Learning Objects into One" posted in July 2010, it sounds possible but I don't know how.
Alwyn

Hi Alwyn,
You cannot move an existing Learning Object to create a nested structure, but you can create a parent Learning Object and add new child Learning Objects, Tests, and/or Surveys underneath it (or copy existing Learning Objects, Tests, and/or Surveys underneath it).
To create everything from scratch:
- Create a top-level Learning Object and leave the starting URL blank
- Select the radio button next to the Learning Object that you just created and create a new Learning Object
- Set the tracking type and starting URL for your child Learning Object as appropriate for the content you're pointing to
To add another child Learning Object or test, select the radio button next to the top-level Learning Object and repeat the same steps until you have all of the nested Learning Objects / Tests / Surveys that you'll need.
The steps are pretty much the same for copying existing Learning Objects:
- Create the parent Learning Object
- Highlight the radio button next to the Learning Object you wish to copy
- Click the Copy button
- Select the radio button of the parent Learning Object you created in step 1 and click Apply
- Update the copied Learning Object so that the title doesn't say (copy) at the end
A parent will be marked completed when all of its children are complete. You map the Offering to the parent Learning Object.
I hope this helps!
Anne

Move existing Time Machine backups to new (larger) drive?

If I get a larger external HD for Time Machine backups, is it possible to move all the existing TM backups from my current drive to the new HD, or do I have to start from scratch?
Has anyone successfully done this?

One more question to the Pros here, please
I perfectly understand how to clone a drive with SuperDuper. But I am unsure about how to clone the Time Machine backup file.
In Finder's sidebar under SHARED I see the Time Capsule. On Time Capsule I see 2 sparsebundle files, one representing my iMac backup and the other my Powerbook backup, as the names indicate. But in SuperDuper's "Copy" dropdown I am not able to open either of them.
So I tried a different approach: I activated Time Machine on the Powerbook. A virtual drive labelled "Backup of Powerbook" pops up in Finder. Now I am able to choose this virtual drive in SuperDuper's "Copy" dropdown. I assume that this the correct file to clone?
Then I would say "to" Disk Image and give it an identical name ("Backup of Powerbook"). Now I should choose the destination where to store the clone. This will be the new USB-HDD that I am going attach to Time Capsule.
Image type would be "Read/Write sparse image"
Right?

Is it possible to move a movie rental from my iPod back to my MacBook?

Is it possible to move a movie rental from my iPod back to my MacBook?

To elaborate on my question...
I have iPod Touch 4thG and MacBook. I rented a movie with the MacBook and then transferred it to my iPod. I want to transfer it back to the MacBook but I am unable to do so.
This does not seem to be true:
If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
I used File>Transfer Purchases From iPod and everything purchased EXCEPT the movie was transferred to the MacBook.
I cannot simply select the movie on my iPod and move it to the MacBook. That does not work, and there is not cut/paste option avaiable either as far as I can see.
What is the trick to doing this transfer?

I have a new IMAC. My mouse (very sensible) gave me the possibility to move left to right and right to left and also to scroll on the vertical way also on my page word. I like the vertical way, it is ok, but is it possible to block the vertical move only

Hi, I have a new IMAC. Only by touch, my mouse (very sensible) gave me the possibility to move left to right and right to left on my pages word and also to scroll on the vertical way. I am ok with the vertical way, but I don't like the very sensible horizontal way. Do someone know a way to block the vertical move only and keep the move of the horizontal way? The only way I found blocked all the moves.
I hope my descripion is understandable... English is not my habitual language.
Danielle

Merci Éric de me revenir en français, je l'apprécie beaucoup. Je ne veux conserver que le mouvement de haut en bas et de bas en haut. Je ne vois pas l'utilité du mouvement horizontale (gauche-droite, droite-gauche) et pire encore, par mégarde je fais trop souvent bouger ainsi mon texte et cela m'embête, même me dérange beaucoup. Même que cela me donne même mal au coeur hahahahahaha!
Par contre, ma souris précédente avait le mouvement de défilement du haut en bas et bas en haut et cela par contre m'est très utile. Je voudrais donc savoir s'il existe un moyen de stopper le mouvement de côté mais conserver tout de même la fonction du mouvement haut-bas et bas-haut avec le simple toucher de la souris. Suis-je plus clair? Disons que c'est plus aisé pour moi en français. merci à toi
Danielle

Possible to move boot display to different DVI port? (GTX780)

I doubt this is possible, but just in case : is it possible to force boot screens to a different port on the video card?
The MSI GTX780 has two DVI ports - one DVI-I (which includes analog display) and DVI-D (which does not). The DVI-I port displays the boot screen, BIOS, and anything that shows before Windows is fully loaded.
I currently have two monitors. My primary monitor can connect via DVI, and since it is a 120HZ monitor, it currently uses a dual link cable. The secondary monitor is older and cannot connect via DVI, so I use a DVI-I-to-VGA adapter and a standard VGA cable for that display. Unfortunately, this means that the secondary monitor shows boot/BIOS/etc.
Is it possible to move the boot display to the DVI-D port on the card?
Please note that this is not a big issue - having the secondary monitor show boot info is a minor annoyance at worst. The secondary monitor also has HDMI-in, so I can buy a cable and use that, and then move the primary monitor to the DVI-I port. I do want to avoid spending more money, but mostly, I want to see if it is possible to force the boot screens to another port. This seems like it might be a very interesting way to learn about the video card (and VBIOS, if changing that is necessary to do this).
Thank you.

In the "Arrangement" pane of "Displays" System Preference, drag the picture of the menu bar to the picture of the other display.

Mass change - Move existing sales orders from Sales org A to Sales org B

Good morning dear network,
am seeking for your guidance on one specific matter.
We are in the process of making changes to our billing / organisational structure (new sales orgs)
One of the challenges is that we need to move existing open sales orders from one sales org to another (new) sales org.
If all master records exist in the new sales org, is there a (technical) way of moving the existing sales orders from the current sales org into the new sales org, without having to replace each order individually ?
would welcome any suggestions.
Many thanks

I would recommend to close the existing open sale orders by assigning Reason for Rejection and create new sale orders in the newly created sales organisation.
This is due to the fact that you need to ensure each and field in the existing sale orders to match with the newly created sales organisation and it is bit time consuming.
Still if you prefer to what you had indicated, LSMW is the better option
thanks
G. Lakshmipathi

Is it possible to move existing WROKBOOKS to STANDARD folder

Similar Messages

Maybe you are looking for