Is it possible to move files from corrupted sectors hard drive to a replacement one?

My 2011 macbook pro was recently diagnosed with bad sectors. I am looking to get a replacement hard drive, probably a 750 or 1 tb Seagate SATA. Do you think that is sufficient? I do not play games or do anything memory intensive. The most I do is watch a lot of movies.
Also, is it possible to move files from a corrupted sectors hard drive to the replacement? If so, how would I go about doing this?
Also, for the operating system, it is probably wrong, and can't check since my Mac pro won't get past half way on the start up loading screen.

Try a sector copy with CCC and enable using checksum file copy to insure integrity.
Then Data Rescue 4 - try demo before buying
Do a full erase of a drive before reusing.
Invest in SoftRAID.com going forward as it "looks for" weak sectors, alerts.
Also Google around but SMART Utility has been mentioned as an excellent program/utility -
When a drive has used any of its spare blocks from when it ships is #1 indicator of being time to replace.
And of course always have multiple backup sets, methods and know how to use and restore from. Even do a practice set. I would not use just TimeMachine for instance.
And for some, only a mirror array (minimum two but really consider three drive mirror, with stripe reads to improve performance) can allow pulling one, add a new member and still have a two drive mirror.
Cloud storage for backup. With OneDrive and Facebook backing up all the photos on all your devices, Macs and PCs as well as tablets and phones, you can have 100-200GB quite easily. And there is Google Drive and Amazon as well as others.
A new data drive, a drive to do all the recovery of files that were on the failed drive(s), and probably a clean system drive and use that as you recover and build your system back up.

Similar Messages

What is a good way to transfer files from an old hard drive to a new one.

I am running low on space on my 80GB hard drive. I want to replace it with a 320GB hard drive. I was wondering what the best way is to transfer all of my files from the 30GB hard drive to my new 320GB hard drive. Not looking for any secure ways. I dont have many important things. Would appreciate help. Thanks.

HI,
Freeing space on your Mac OS X startup disk
Carolyn

Can't move files from my external hard drive to the desktop?

Hi folks, for some reason I am unable to copy files (irrespective of type) from my usb 2 external hard drive to my desktop. This is only a recent thing. Up until a few days ago I was able to transfer files back and forth without problem. Now it is only possible to move unto the harddrive and not the other way around. The harddrive is formatted in Mac OS Extended (journaled). I have tried running disk utility to repair the disc on both external and internal drives, and it advises me that no repairs were necessary. I have also checked the info and read and write is permitted and none of the files are locked. When I attempt drag a file off the harddrive to the desktop the cursor turns into a stop sign (circle with line through it). If I attempt to copy and paste, the file copies and then will not paste as "paste" does not appear in the contextual menu. I have had some limited success by dragging files off the external hard drive to the trash and then dragging then back out of trash unto the desktop. But this only seems to work sometimes?
It would be great if someone could suggest a reason and solution for this. Thank you in advance.
Jono

Sure sounds like permissions are goofed up somewhere. You weren't really clear about exactly what you had checked. Since you can copy TO the drive let's assume things are OK there. How about your Desktop folder? Did you check it with GetInfo to make sure you are the owner and have read and write permissions to the Desktop folder? I have seen these get messed up before.
Francine
Francine
Schwieder

How to move files from an external hard drive to a time capsule that is part of an extended network

What are the steps for copying or transferring 235 GB of files (primarily .mts movie files) that are on a Western Digital external hard drive to a 500 GB Time Capsule that I want to use as an external hard drive? After the files have been moved, I will be returning the Western Digital external hard drive to my son's coach and will be using iMovie to access the 500 GB Time Capsule to create a highlight video.
Currently, I have a 1TB Time Capsule that is serving as the wireless router for my network and for Time Machine backups to two Macs. The 500GB Time Capsule is set up as an extended part of the 1TB Time Capsule's network.
I can copy and paste files from the Western Digital exernal hard drive to the Desktop of my iMac but when I try to move a file from the Western Digitial external hard drive to the empty 500 GB Time Capsule, the following error message pops up:
"The item “filename” can’t be moved because “Linda's Time Capsule (2)” can’t be modified."
Thank you. Linda

Click anywhere on the open desktop so that the Finder menus are displayed at the top of the screen.
Click Go > Network
Double click the Time Capsule icon, then double click the icon representing the drive to mount it on the Mac's desktop. It is named "Data" unless you have changed it
You can drag/drop files to the "Data" icon on the desktop
235 GB is going to take forever if you try to do this using wireless. If at all possible, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule.
Even using Ethernet, you are probably looking at 10-12 hours for the file transfer. All bets are off with wireless only, but a guess would be several days....or even more.

How do I move files from a portable hard drive to my MacBook Pro?

Hope someone can help with this. I recently got myself a MacBook Pro and I'm having problems transferring files from my old Windows XP based laptop. I downloaded the Windows Migration Assistant onto my old laptop but everytime I tried to run it I got various error messages telling me I needed to upgrade this and that. Now the laptop has decided to give in totally and won't switch on at all! I do have all my music etc backed up onto an external hard drive but when I connect it to my MacBook it just doesn't want to know, I assume as all the data on there is formatted as Windows. Has anyone got any tips about what I can do if anything next? Thanks

mende1 wrote:
Welcome to Apple Communities.
You should be able to read the external drive. Go to Finder and see if your external drive appears in "Devices". If it appears, press it and migrate the files you want
Thank you so much for your advice, I was panicking there for a moment thinking that I'd have to start from scratch! You are an absolutr STAR!

How do I import movie files from my external hard drive into I-Tunes?

Hello
I have a whole load of movies and tv shows stored on an external hard drive. I would like to import a few of them into I-Tunes and then on to my Ipad because I'm going travelling tonight.
I'm dragging the file into I-Tunes but it won't copy. They are mp4 files.
I have one mkv file which I am trying to drag also.
If anyone has any tips I would be grateful.

im not sure why the mp4's wont go i, but the mkv is not a supported format. i would look into some sort of video converter.

HT201250 My macbook pro crashed and I had to install a new hard drive. I restored from Time Machine backup all the files from my old hard drive onto my new one.

Does it really back up the whole new drive or does it only back up what's been added? It seemed like it was doing the whole thing when I tried it. I stopped it. Don't want to use up all the space on my external. Is there something else I need to do or did I mess up by not doing the migrating thing? thanks!

If you installed a new hard drive, it has nothing on it and yes TimeMachine is going to take forever to restore everything back.
I guess you'll have to erase and start over again now.
Too bad, you should have made bootable clones in addition to TimeMachine, they can restore in a hour or two depending upon content, they are also option key bootable.
TimeMachine has to go through and calculate all the files it needs to bring forward, the files are strewn all over the drive. The read heads are moving all over the platters all the time from fast sectors to slow ones, not matching what's occuring on the internal drive.
With a clone the files are defragmented and optimized, the drive reads one file, moves the heads a tiny bit and reads the next all the while transferring exactly to the internal drive, they are more in step with one another, thus it's much faster restoring from a clone than TM.
Most commonly used backup methods

Trying to transfer files from a failing Hard Drive to a new one

Every time a try to transfer to the new drive, some sort of error pops up and the whole transfer needs to stop. I'm trying to find a program that will continue to copy files over without stopping. It's fine if I lose some things along the way.
The old drive is formatted incorrectly, so I can't use super duper for some reason. Is there any other program I could use to copy/back up the failing drive? Or some setting in OS X that will continue the transfer of files despite error?
Thanks in advance.

HI Greg,
Tri-Backup...
http://www.tri-edre.com/english/tribackup.html
30 day free trial and it'll copy & just report he errors at the end.
If DiskWarrior can't fix it, (has a god scavenge by holding option key at start), you might try Data Rescue II...
http://www.alsoft.com/DiskWarrior/
http://www.prosofteng.com/products/data_rescue.php
(Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
Or FileSalvage...
http://www.subrosasoft.com/OSXSoftware/index.php?%20mainpage=product_info&productsid=1
to recover what you can.

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then onl

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then only delete a small amount at one time?

See
Deleting backups via the Finder on Lion 10.7.x or later:
http://pondini.org/TM/12.html
Hold option (alt) while emptying the Trash.
See also
http://pondini.org/TM/E6.html
Message was edited by: WZZZ

HT201250 Is there a possibility to recover erased files from an external hard drive that was reformatted by the Time Machine?

Is there a possibility to recover erased files from an external hard drive that was reformatted by the Time Machine?

Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

Just bought a new macbook w/ mtn lion. transferred data from my old macbook over n it created another user name. that's actually good--xcept for music, which i want on my new acct. How do i move files from my "old comp" acct to my new one?

i just bought a new macbook w/ mtn lion. when i transferred data from my old macbook over, it created another user name (i called it "old computer"). That's actually good--I'm not going to be accessing old files frequently--except for music, which i want on my new user name. How do i move files from my "old comp" account to my new one? Is there a way to easily move large #'s of files, or just one by one? I've googled extensively but can only find instructions for OSX 10.6 and previous, which talks about the "Shared folder," which I can't seem to find.

jesster03 wrote:
i just bought a new macbook w/ mtn lion. when i transferred data from my old macbook over, it created another user name (i called it "old computer"). That's actually good
That's actually bad. Peruse Pondini's Setup New Mac guide and seriously consider starting over.

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose.

Importing .mxf Files from an external hard drive...

Any advice or tips would be greatly appreciated. My problem comes close to others discussed, but I haven't been able to find a duplicate post. And I apologize for the length; I just want to give you as much info. as possible (I also put details in my signature) to help you help me.
I shot a short film using Panasonic's HVX200 camera, filming in HD 720p/24p, and downloaded each P2 card through a PC laptop into a LaCie Brick external hard drive. I was originally planning on editing the footage with Adobe Premiere Pro 2.0, but became frustrated with how much trouble it was having handling the .mxf files. Assured by Apple salespeople that FCP 5 would have no problem importing the footage from an external hard drive, I purchased the computer described in my signature.
Now I know that FCP/Apple only supports importing footage from the P2 card directly, and not from an external hard drive. A representative from ProMax.com was able to help me out, however. First, he had me copy the footage files onto my Mac internal drive from the external hard drive. Then, he had me select IMPORT -> PANASONIC P2. Then, I was to highlight the CONTENTS folder and import away. And it worked... sort of.
There are two major problems: 1) During this transfer, not all of the footage is making it across. I import it, and then get the much-talked about "one or more P2 clips failed to import; probable incomplete or corrupt clips" warning. After checking the original video folder on the internal hard drive and comparing it to the number of clips FCP imported, I learned that I had lost around 20 clips/video files at one point. Other shooting day transfers worked completely smoothly with all of the files imported (we split up the footage by shooting day, without touching or changing the CONTENTS folders). So, some transfers work and some don't. And 2) When I try to import the files from our 4th day of shooting, I get a "Selected path does not contain a P2 volume." Nothing is imported.
So, that's my situation, and I'm getting very desperate. I know that I'm not doing things in the Apple-supported way, but I'm really hoping there's still someway to successfully get the files from the external hard drive into FCP completely. It seems to work some of the time.
Final notes: When importing, I make sure to import the entire CONTENTS folder. There is never a LASTCLIP.TXT file listed under it in the window, but some of the days of footage have transferred perfectly, so I'm hoping that's not a dealbreaker. If it is, isn't there some way to rebuild a lastclip.txt file? I don't even know if that's the issue. And one last note: In most of my folders, the "CLIP" folder has a number of files in it. In the 4th day's footage that I can't import at all, I noticed that the CLIP folder is empty. And on the days where FCP isn't importing all the files (like I mentioned above), there isn't a CLIP file for every single VIDEO file. Could this be the main problem? Along this line, is there a way to somehow put the footage on the external hard drive back through a p2 card and then into the Mac?
Okay, I'll stop typing. Thank you so, so much for any help.
Tom
PowerMac G5 (Dual 2.3 GHz) Mac OS X (10.4.6) Quicktime 7.1.1 - Final Cut Pro 5.1 - Aforementioned External Hard Drive: LaCie Brick (FAT 32 based)
PowerMac G5 Mac OS X (10.4.6)

The problem didn't turn out to be as complicated as I had thought. The process I described above ended up working fine, and I'll explain how. And this is a cool workaround, because the AppleCare helpers told me that they didn't think it would work (FCP P2 import is only supported straight from the P2 card/viewer or the camera).
I hooked up my external hard drive to the Power Mac G5, and copied the files and folders onto my internal scratch disk. Then, I opened FCP and chose IMPORT -> Panasonic P2. I chose the "CONTENTS" folder for each day's filming, and imported them in, no problems. There was no visible "lastclip.txt" file shown (under the "CONTENTS" folder or anywhere else), but this didn't seem to cause any problems.
The reason that not all of the footage was bring imported (the aforementioned "one or more P2 clips failed..." warning) was because we were missing clip files (in the CLIP folder) corresponding to certain video files (in the VIDEO folder). Luckily, we had just forgotten to transfer all of them from the original external hard drive, and once we transfered them completely, FCP could read all the video files. FCP needs a clip file for every video file in order to make it work (that's why our aforementioned "Day 4" could not be read; we hadn't copied all of the clip files over with the video files).
Even after we did this, we STILL were getting the "one or more P2 clips..." warning for our Day 5. After taking a look at all the folders, we figured out that there were still more files in the VIDEO folder than in the CLIP folder, even after we transferred them all over. Finally, we figured out what had happened. For some reason, some of the audio files for some of the clips had been included in the VIDEO folder for our Day 5. There is no way we did this accidentally; somehow, the HVX200 placed some of the audio files into both the VIDEO and AUDIO folders. And FCP was trying to read those as video files, and therefore couldn't find the corresponding clips in the CLIP folder. After making sure that those audio files were also in the AUDIO folder, we simply deleted them from the VIDEO folder and stopped getting the "failed to import" warning.
Final thing to share: If we had actually been unable to find the corresponding clip files in our original external hard drive, we had also found a potential solution (that we didn't end up needing to try). You can record from FCP back onto the P2 card, in the hopes that the clip files would be regenerated when you re-import it into FCP. I received a PDF file about this process, and I'm not sure how to put it up on the page here. If interested in this described process (which, again, I can't fully vouch for), feel free to email me at [email protected] and I can forward it to you.
Hope this helps.
PowerMac G5 Mac OS X (10.4.6)
PowerMac G5 Mac OS X (10.4.6)

HT2674 I have an iMac purchased in May 2011. OSX Lion 10.7.3. I deleted backup file from the external hard drive. Now, the trash can will not empty some of the files deleted. File folder: "Core Services" contains a locked file: "boot.efi". It will not

I have an iMac purchased in May 2011. OSX Lion 10.7.3. I deleted backup file from the external hard drive which operates from Time Machine.
Now, the trash can will not empty some of the files deleted from the backup harddrive.
The trash contains-- File folder: "Core Services" which contains a locked file: "boot.efi".
It will not delete.
How do I get the trash can empty of these files?

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

How do I delete files from a portable hard drive

I've been backing up my MacBook Pro on an external portable hard drive. I need to delete some but not all the files from that portable hard drive permanently. When I highlight them and click to move them to Trash I get a message telling me this cannot be done because they are Read Only files? How do I go about it. I am required by work to delete them off this hard drive. Do I have to reformat the hard drive? If so how do I go about it?

You can easily delete files from a Time Machine Backup:
Click the Time Machine icon in the Dock.If the Time Machine icon isn’t in the Dock, look for Time Machine in the Applications folder.
Use the arrows or the timeline along the right side of your screen to browse through the backups Time Machine created.The windows behave just like Finder windows, so you can open folders, click items in the sidebar, and use the search field in the upper-right corner of the window.
When you find the item you want to delete, select it, and then open the Action menu (looks like a gear) and choose Delete All Backups for the item.

Is it possible to move files from corrupted sectors hard drive to a replacement one?

Similar Messages

Maybe you are looking for