Is it possible to move the SAP database to a dedicated host

is it possible to migrate one SAP system that has the CI and DB on the same host to a system that has CI and DB on different hosts?

Hello Tiberiu,
yes you will need to change profile parameters , especially your STARTUP profile in the /usr/sap/<SID>/SYS/profile directory.
It would have a name like : START_DVEBMGSXX_<hostname>
You can move your CI too, moving CI would require you to re-install the CI and point it to the new DB.
Check relevant guides as mentioned by others above.
Regards,
Siddhesh

Similar Messages

Is it possible to move the "Add.." button at contacts on top of the custom label list? I add a lot of custom lables and tired of scrolling down every time.

Is it possible to move the "Add.." button at contacts on top of the custom label list? I add a lot of custom lables and tired of scrolling down every time.

No way to move any buttons in iOS devices.

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then onl

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then only delete a small amount at one time?

See
Deleting backups via the Finder on Lion 10.7.x or later:
http://pondini.org/TM/12.html
Hold option (alt) while emptying the Trash.
See also
http://pondini.org/TM/E6.html
Message was edited by: WZZZ

Is it possible to move the rsw.vba file to a shared directory?

As I create more global functions, contants, variables, subs etc., this file will get very important. So Important that I suspect if it were somehow to become corrupt, deleted or lost most or all of my scripts would be broken. Right now I don't have source control software so I would like to store this file on our fileserver. I have already moved my repositories, scripts and DataBank Files to this location.
Thanks in advance,
hagstal

Hagstal
i don't believe is possible to move the RSW.vba file to a shared directory, however you can just copy the file across different machines.
I would also strongly recommend that, (if this file is gonna become so important) to use a source control system, SVN and tortoise make a very good combination
(http://tortoisesvn.tigris.org/).
Have a look at this thread, it has some other ideas on how to share your RSW.vba file
http://qazone.empirix.com/thread.jspa?threadID=411&tstart=0
Message was edited by: aamat

I am creating a video using the green screen option- I imported a picture for the background of the project and videotaped someone using a green screen. Is it possible to move the video of the person around so it is not blocking the picture behind it?

I am creating a video using the green screen option in iMovie. I imported a picture for the background of the project and videotaped someone using a green screen. Is it possible to move the video of the person around so it is not blocking the picture behind it?

To enable this right you need Acrobat, not the free Reader.
However, starting from Reader X it is possible to add simple markups to any file, unless it has been specifically disallowed by the creator of the file.

Is it possible to move the master data from one server to onther server?

is it possible to move the master data from one server to onther server?

iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

Is it possible to move the brush overlay that you have synced to a new photo?

Lets say you use the adjustment brush and highlight only the subject of the photo to brighten it up and make adjustments. Then the next photo you have is almost identical, except it is framed a little differently. So, when you sync the settings from the previous photo to this new photo (including the brush adjustments), the overlay mask will mimic the previous photo and will not line up with the subject in the new photo. Thus, my question is, is it possible to move the overlay mask in the new photo after the sync so that it can match precisely over the subject?

No.
Sent from phone.

Is it possible to move the movie- motion templates folder to an external disc?

Is it possible to move the movie- motion templates folder to an external disc, my internal disc is almost full with just motion templates effects. What can i do and how?

Take a look at this thread. I've not tried it.
Russ

Is it possible to move the local CD database from Windows to Mac?

I have/had iTunes installed on a Windows box. Windows knows all my CD and track titles (some customised from those in the online CDDB). There are more than 250 CDs, so it is a lot of data (if I have to retype it all...)
I have recently moved to a Mac. The ripped library files copied across just fine (even kept the album artwork).
However, the Mac doesn't know any CD/track titles, so when I insert a CD, there are no names. The Mac is not on the net, and probably never will be. I want to move the copy of the local CD database from the windows machine to the Mac. Is this possible? How?
Dual G4 Tower Mac OS X (10.3.9) Also Windows XP
Dual G4 Tower Mac OS X (10.3.9) Also Windows XP

I imagine you will need to network your PC with your Mac to transfer or transfer your Library from your PC to an external drive then hook this up to your Mac and transfer.

Is it possible to authenticate the SAP GUI user against LDAP ( no SSO )

Hi
I was under the impression that you can user LDAP to authenticate your SAP GUI user . ( so users do not have to maintain and remember multiple passwords )..
However - note #603208 claims that this is not possible.
This is quite an old note , is this still true ?
note #793191 ( FAQ ) says :
9. Can I synchronize user passwords?
Response: No.
The password cannot be synchronized. For more information, see Note 603208.
and note #603208 says :
A comparison of the production password with a directory is not possible.
The following reasons are responsible for this:
The password is not stored in the plain text or in in "enciphered" form, neither in SAP Web Application Server nor in the directory, rather is is stored as a "hash value" that is calculated from the password that is entered. The function used for this is especially designed so that the password CANNOT be reconstructed from the hash value.
For technical reasons, the user master synchronization cannot therefore extract the plain text of the password and send this to another system.
The user's password has a size that is known only to the user. Even the system administrator and database administrator cannot obtain any information about the password.
A comparison in plain text form would violate this basic rule. For this reason, the use of a hash value is a generally applied standard.
Often the adjustment of passwords in several systems is equated with the term "Single Sign-On".
However, this term must only be applied if the user logs on once and this logon information is transferred within the system infrastructure.
The SAP Web Application Server supports real Single Sign-Ons (note 138498).

Please do not duplicate post!
See the other thread...

Space problems with the SAP Database MS SQL 2000

Hi,
Actually, I have a size problem with the database, I have MS SQL Server 2000 with Service Pack4 on a Windows 2003 Server environment that is my DataBase Server of my ERP ECC 6.0. On the other hand I have a storage where I have 229 Gb of free space used only for the database files of the SAP data and the SAP log file.
But when I check the DB space allocation on trx. DB02 I saw this:
3 Database files and 1 transaction log:
The 3 database files are: PRDDATA1 (size 15,313 MB used 15016 MB) , PRDDATA2 (size 14106 MB used 13984 MB), PRDDATA3 (size 14472 MB used 14352 MB) and the log file is PRDLOG1 ( size 1000 MB) all of them with no limit option and growth by 10%.
So I went to the SQL Enterprise Manager and I saw that my Database PRD properties and I got this information:
My database size is 44892.48 Mb size with only 1330.36 Mb of free space and that is alarming.
So the question here is how ,if I have a storage where the sap data is storing with 229 Gb of free space, can I make the database files grow up in order to use all the available space of my storage.
Can you help me please because it is critical being my productive system?
Best Regards
Erik Espinosa

I resolved this issue myself. Thanks for all your help.
Best Regards,
Erik Espinosa

Is it possible to move the ldb selection screen?

Hi All,
I have a custom program which uses a logical db.
The selection screen from the LDb is displayed first and then my custom selection screen is displayed.
There is a requirement where the custom selection screen needs to displayed first - at top and then the selection screen from the LDB.
Is it possible to move down the selection screen from the LDB?
If so then please let me know how...

Hi,
with LDB, you can just hide or display LDB selection screen elements,
but moving your custom selection screen above LDB selection screen is not possible, as upto my knowledge.
Thanks.
Raghav M.

Is it possible to move the CTI via ExtendScript?

I have found no indication that it is possible, and it would serve no purpose to move the CTI during playback, but can you move the CTI to a specific time using ExtendScript?

I thought this wouldn't work, but it does. Never mind, nothing to see here.
var myComp = app.project.activeItem;
myComp.time = 1;

Is it possible to move the adjustment brush dot?

A lot of times i find the adjustment brush dot to be in my way when judging the result.
Say i zoom in and brighten up the eye on a model.
Then I want to zoom out to se what it looks like and the dot covers half the face of the model.
Of course i can click the adjustment brush again in order to go out of the adjustment brush tool but then i cant adjust settings at the same time.
I can also hide the dots but that's not really what I want to do as I'm shifting between them making different fine adjustment.
I don't mind the dots when judging the picture but I just don't want it in say, the middle of the eye.
The workaround I'm using is to get a new adjustment brush, set the flow to lowest value, click where I want the dot (usually at the same height as the eye but outside the model), then i pull flow up again and paint on the eye.
Is it possible to get the same result as I want without having to do my workaround using the flow setting?

cwallentin wrote:
The workaround I'm using is to get a new adjustment brush, set the flow to lowest value, click where I want the dot (usually at the same height as the eye but outside the model), then i pull flow up again and paint on the eye.
Is it possible to get the same result as I want without having to do my workaround using the flow setting?
It's not possible to move it and your workaround seems like a lot of work, especially when all you need do is hit the H key to hide then again to make visible. Also, it's not clear to me why hiding the pin doesn't solve your problem.

Is it possible to move the wiki to a separate server running Linux?

I'm wondering, is it possible to move a wiki that you've made (clean install) via Wiki Server 2 to a separate server that does not run Mac OS X?

Hi Joseph,
I am afraid that the feature that you are requesting for is not there in Muse at the current stage. I will recommend that you post this in the ideas section and let the devs team know about the requirement for this feature, Ideas for features in Adobe Muse
- Abhishek Maurya

Is it possible to move the SAP database to a dedicated host

Similar Messages

Maybe you are looking for