Is it possible to nudge by sample multiple regions at once

As you guessed I need to line up (sync up) a group of tracks in the arrange window to one stereo mix track. There is a duplicate of the stereo mix that is in sync with the group of tracks. In the arrange window I can get pretty darn close by tic, but I want it to be sample accurate. There is a workaround right ?
Thanks

Not directly in the arrange, because it is not sample accurate, only tick accurate.
You have to use the sample editor (drag the anchor point) but you can only do this one file at a time, so it's a tedious workaround when you need it.
Sample-accurate arrange is probably the single most requested change in architecture over the years - Logic's engine, coming from it's sequencer origins, is not sample-position accurate for audio regions.

Similar Messages

  • Is it possible to filter images using multiple keywords at once in Bridge CC?

    Say I want to find only images that contain both the keywords 'female' and 'hat' but not see ones that only contain one of the words, is that possible?

    It's a shame that this in not possible.
    To me keywords are useless if this is not possible.
    The only way you can do that is using the search function and that is a really bad workflow - too slow and not flexible at all.
    This is a really needed function.
    Does someone know a programm that can do that?

  • Is there a way of moving/quantizing multiple audio regions at once to the nearest bar/beat/division?

    Hi,
    I'm having trouble finding a solution which I hope turns out to be fairly simple. Here's my problem:
    I often make drum beats from audio files that looks something like this:
    What I'd like to know is if there is a way to highlight say all of the snare audio regions and snap or quantize the "audio region start" to the nearest beat or division. I've been looking everywhere and I just can't seem to find a way to do it to multiple regions at once. It seems like somehting that should maybe be fairly simple. Turning "Flex" on doesn't work as that quantizes the transients as opposed to just the start of each audio region.
    The reason I ask is that sometimes when zooming in fully, it turns out some of the regions are not exactly on the grid line.
    I hope I made sense there and I'd appreciate any help. Many thanks in advance.

    Hi
    The "traditional" way to quantise audio regions is to use the quantise functionality in the Event List.
    CCT

  • Is it possible to stream music to multiple sets of speakers via airplay direct from iphone4s on ios7 in the same way that you can in iTunes

    Is it possible to stream music to multiple sets of speakers via airplay direct from iphone4s on ios7 in the same way that you can in iTunes / Remote?
    I know this can be achieved by the remote app.
    Airplay functionality appears only to support 1 set of speakers at a time?

    Hockeyfanatic wrote:
    Does anyone know how or if it's possible to stream my music from the iPhone to iTunes via bluetooth or wifi? Essentially I want to share the iPhone's library with iTunes (I know one can go the other way).
    Here's why: I'd like to stream my music at work to my computer's speakers without taking the phone out of my pocket. I obviously don't have my home music collection on my company computer. And I figure if I place the phone on my desk to plug it in and play through iTunes, I could easily walk off without the phone. That would be bad (out of contact) and potentially sad (stolen).
    It seems right now the only bluetooth connection to a computer is for the remote application.
    Wait until November. Airplay/Airtunes iOS 4.2 announced for iPhone to iTunes/iTV. If you want a BT audio stream now, you can add a dongle to the PC for headset streaming.
    As far as WiFi file transfer iPhone to iTunes, you can't. There's talks on it but nothing concrete. Except JB.

  • Is that possible to set up a multiple y-axis and single x-axis in one waveformchart (in LabVIEW 8.0)?

    Hello!
    Is that possible to set up a multiple y-axis and single x-axis in one waveform chart using LabVIEW 8.0?
    Because I need to display several channels in the same chart, if one channel has a very big data range and the others not, the channels with smaller data range will not be displayed very clear.
    Thanks!

    See similar thread at http://forums.ni.com/ni/board/message?board.id=170&message.id=154428&requireLogin=False

  • Is it possible LSMW recording method using multiple structures

    Hi,
    can any body tell me, is it possible LSMW recording method using multiple structures
    i,e using Header details one flat file structure and Item details another flat file structures

    Hi,
    Check this link..
    LSMW multiple structure migration

  • Can you simultaneous sample multiple SCXI-1520 cards in multiplexed mode?

    Can you simultaneous sample multiple SCXI-1520 cards in multiplexed mode?
    In parallel mode, you can have all channels sampled and held, and then have each
    of your E or M series cards multiplex through each of the 8 channels of each card.
    This yields simultaneous sampling on all channels at a faster rate in this "SCXI-1520
    Parallel Mode" than you can derive from the "SCXI-1520 Multiplexed Mode."
    Does the "SCXI-1520 Multiplexed Mode" also provide the capability to Simultaneous
    Sample and Hold, all be it at a slower net throughput yield then the "SCXI-1520 Multiplexed Mode?"

    Hello,
    Thank  you for posting to the NI Forums! The SCXI-1520 User Manual does indicate the Simultaneous Sample and Hold can be used with Multiplexed Mode. Please refer to the last two paragraphs of page 69 and the first paragraph of page 70 for a better explanation. Hope this helps! Let me know if you have further questions!
    Message Edited by Margaret F. on 04-21-2009 05:25 PM
    Regards,
    Margaret Barrett
    National Instruments
    Applications Engineer
    Digital Multimeters and LCR Meters

  • ? Flash CS4, Is it possible to adjust the length of multiple timelines at once?

    Hi,
    I am using Flash CS4. Is there any way to adjust the length of multiple timelines at once? I am doing an animation of leaves falling from a tree. The leaves alone have 17 separate timelines on separate layers plus each has it's own guide layer.
    If I had the ability to to select all of the timelines together and adjust all of their respective start and end times at the same same time, relative to each other as well as separately, life would be so much easier!
    Of course I can do it timeline by timeline, no problem, but I can't seem to adjust the length of more than one timeline at a time. (no pun intended)
    Even when I select more than one timeline, the double arrow only adjusts the length of one timeline. Even each guide layer's length has to be adjusted separately. I understand the benefit of this, but, testing timing and making adjustments would be so much simpler and go so much faster if I could select and drag multiple timeline lengths at the same time.
    Is there any way to do this?
    I'm new to Flash so, thanks in advance for your patience with me!
    SabelV

    Thanks! I had a feeling. It's nice to have the answer. Oh well, now I can get back to work and not waste any more time with that part of the puzzle. You've been very helpful and I'm sure your answer is correct.  Wish I knew how to rate your answer even higher. Thanks again!

  • Insert data into multiple entities at once using a view object

    Hi,
    I'm trying to insert data into multiple entities at once using a view object, but unfortunately it doesn't seem to work. The two entities have a 1:1 association. I created a view object which contains both entities and I made sure they aren't read-only. But like I said it doesn't work, I can't insert data in both entities at once... :(
    Is this possible? And how (if it is)?

    Hi,
    I'm trying to insert data into multiple entities at once using a view object, but unfortunately it doesn't seem to work. The two entities have a 1:1 association. I created a view object which contains both entities and I made sure they aren't read-only. But like I said it doesn't work, I can't insert data in both entities at once... :(
    Is this possible? And how (if it is)? Peter:
    This is definitely supported and tested. Please send us the exception stack trace. You must running into other problems. A few things to note:
    A) You have to mark the entities as both updateable (not read-only) and not reference-only.
    B) If you're not seeing an exception stack, turn on diagnostic. Here is how:
    To turn on diagnostic, go to the IDE,
    1. Select the project.
    2. Do right mouse click and select "Project Settings..."
    3. On the Settings dialog, select Configurations/Runner.
    4. In the righthand side pane, you should see a textbox for "Java
    Options". Please add the following JVM switch:
    -Djbo.debugoutput=console
    Then, rerun. The run command should include
    -Djbo.debugoutput=console as in
    "D:\JDev9i\jdk\bin\javaw.exe" -Djbo.debugoutput=console -classpath ...
    You should now see a lot more output on the IDE's message window. Here you should see the exception stack trace.
    If you invoking your app directly from command prompt, just add "-Djbo.debugoutput=console" after your "java.exe".
    Thanks.
    Sung

  • How to apply lens correction profile to multiple images at once?

    I have a quick newbie question and I couldn't find an answer in a brief search that I did. Is it possible to apply lens correction profile automatically to multiple images at once? For my RAW images, LR automatically detects the lens and applies the correction profile for an image if I manually click on "Enable lens correction" option under Develop module (in the right pane where adjustments are made). However, I would like to do this to multiple images all at once.
    Thanks,
    Osho

    Be careful using develop setting synchronization for lens profile across mutiple images! This allows applying an incorrect profile (i.e. Canon 17-40mm profile with synchronization to images shot with multiple lenses) First use the 'filter' tool to make sure you select images shot with only one (1) lens type. Then follow one of the procedures here:
    http://help.adobe.com/en_US/Lightroom/3.0/Using/WS0E6E6886-E223-4050-B6E0-A97B5B62EF7D.htm l
    You can also change the "default" develop settings with 'Lens Profile' option checked and then save as the "new default" setting. LR will then "automatically" apply lens profile correction on import of new images.

  • Multiple Region PDF's

    I just finished installing BI Publisher and have successfully created pdf documents from reports. Now I have a page with multiple regions (4 to be exact). It seems that the printing options are on a region by region basis.
    Is there a way to print a whole page as a PDF?? Ideally, it would be like a 'printer friendly' report (without tabs etc.) but contain the entire page not just one region .

    Scott,
    There's no print-friendly PDF version of a page. So you're right, it's on a region by region basis. There are however report queries available under shared components. Those report queries allow you to use RTF based report layouts, which can include multiple regions, combinations of regions and charts, and you can include the values of you application and page items, if you want to display those values in your PDF as well (e.g. form values).
    You can find samples for RTF templates on the BI Publisher OTN site:
    http://www.oracle.com/technology/products/applications/publishing/index.html
    Regards,
    Marc

  • Searching Multiple Articles at Once

    The Platinum Edition of the 7th Edition of Perry's Handbook of Chemical Engineering came on a CD with an Adobe edition with a special  Adobe add-on that allowed searching of multiple articles at once.  This edition of the famous print book played the individual sections as separate articles, and latter versions of Adobe Reater must open the sections one-by-one, making the search function almost useless.
    Is there an add-on that will allow multiple-article searching like that?  Where to find it?
    TIA! Enginer-OA

    No, but it's possible to create an index (with Acrobat) which allows that.
    You can't do it if you only have Reader.

  • Changing the display profile for multiple users at once.

    Is it possible to change the display profile for multiple users at once? We would like ot be able ot add tabs and channels globally, but right now we can anly do it for once user at a time. Also, is it possible to have certain generic display profiles that all users use? like an admin profile and a tech support profile and a normal suer profile? Any help is appreciated...

    Yes this possible using the dpadmin batch command.
    Please check the dpadmin documentation for the batch command.
    For generic display profile what you can do is create users and assign the user particular roles. The display you would be creating would be for the roles. The users belonging to that role would inherit that display profile.
    HTH ..

  • Scheduling Multiple Reports at Once

    Is it possible to schedule multiple reports at once - so if I have a set of 40 reports that make up a financial close book, can I just schedule the book?
    Thanks,
    Chris

    Hi ,
    use the RUN_PRODUCT() built - in procedure..... for every instance of record , if you have a multi-record-block.....
    note: maybe you should give some additional info , adout what the form like , in which circumstances should the reports be called , .. ... e.t.c..
    Simon

  • Firefox will NOT load multiple pages at once, Help!

    I cannot get Firefox to load multiple pages at once. If I try this, they will continue to show the "load"/"refresh" symbol forever and ever (at least half an hour by the time I got fed up). I can load one page at a time but even then it takes quite a long time for the page to fully load - god forbid the page has images on it because then it might take up to 10 minutes to fully load.
    Sometimes if I try to load multiple pages and then "x" out of them and try to do it one by one, it simply refuses to load ANY of the pages.
    I can load multiple pages at one time in IE on my computer, I can load single pages in IE without delay. I can do the same thing in Safari on a desktop mac in the house. So NO, it is NOT my internet connection, thanks.
    For God's sake, I'm sending this complaint/question in IE because I KNOW it won't send in firefox. How messed up is that?

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

Maybe you are looking for