Is it possible to obtain a report from Ciscoworks LMS3.1 to detail the SNMP configuration of all devices?

I am about to update/standardize to secure the SNMP configuration for all devices in the network utilizing Ciscoworks.
There is likely to be variations amongst the devices. Therefore, I would like to generate one report for all the devices, capturing the SNMP configurations, is this possible?
I know how to complete the work afterwards but am struggling to produce a meaningful report that I can use to build my tasks from.
I am trying to achieve this using a particular 'role based' account via ACS, so it is possible that I don't have the permissions with this account at present which maybe why I'm not able to do it.
Thanks!

Getting the SNMP trap community string is not trivial.  The reason for this is that anything which shows the configuration will have this field starred out. You can get to the value, but not in a report-like fashion.  You can, however, search the archived configs under RME > Config Mgmt > Archive Mgmt > Search Archive.  Assuming you know the SNMP trap receiver IP, you could search on:
snmp-server host x.x.x.x old-string
That would show you all devices that still had the old community string.
If you need to force RME to get the new config data, you can simply schedule a Sync Archive job under RME > Config Mgmt > Archive Mgmt > Sync Archive.  Of course, if you made the changes outside of LMS, you will need to manually update DCR with the new community string.

Similar Messages

  • Is it possible to upload photos directly from a digital camera to the Zen Sle

    Hello
    My girlfriend and I are going to South America. Therefore, I am not only looking for a MP3-player, but also a place to store photos. The Zen Sleek court my attention.
    Though, I would like to know whether it is possible to upload photos directly from a digital camera to the Zen Sleek? Does it require any extra cables or software? Or is it only possible to store photos through a ordinary computer and then transfer photos to the harddisc on the Zen Sleek?
    Regards
    Mads Lyngby Petersen

    Short answer, I've never seen anyone try it.
    Long answer, it might be possible using one of these USB bridge devices. Some of these devices are supposed to be able to bridge between a camera and a USB mass storage device, and then deal with hosting the connection and moving/copying the files.
    I would be intruiged to know if someone's managed it, but as mentioned so far I've not seen anyone mention it.

  • HT1414 is it possible to copy backup taken from my old iphone to the new one?

         is it possible to copy backup taken from my old iphone to the new one?

    Sure you can, as long as you still have the old backup.
    I have restored my iDevices (iPod Touches, iPads and iPhone) from backups a number of times. I've done this long after the devices were setup. Sometimes I restore from a backup because I have tweaked a setting and it screwed something up on my device so I restored from a backup in order to restore the previous "non-tweaked" setting back to the device.

  • I cannot sync all my photos from mac ti iPhone. The sync finishes before all photos arte copied to The iPhone so in my iPhone I have albums with less photos than Mac!

    I cannot sync all my photos from mac to iPhone. The sync finishes before all photos are copied to The iPhone so in my iPhone I have albums with less photos than Mac! I select The album that I want to sync on The iPhone on iTunes but the syncronization finishes before all the photos of the selected albums are copied on The phone.

    You should erase all contents and setting before giving your iphone away.
    iOS: Understanding 'Erase All Content and Settings' - Support - Apple

  • Is it possible to run a report from another machine?

    Lets say you design a report on machine A that contains the CR Developer Software Package.
    Is it possible to execute the report from machine B that does not contain CR Developer Package?
    Is there tool or a command that you can run that will execute the report created in machine A?
    Thanks in advance,
    Zack H.

    Crystal Enterprise (or BOE) will run a report developed on machine A and imported to a repository on the CE/BOE machine.  Is that what you mean?  Or, I suppose anything that can run a Crystal Report given the file name could run it if the UNC path is given for the file name (assuming database connections are set up on the running machine)...
    HTH,
    Carl

  • Is it possible to output multiple clips from a multitrack session, at the same time?

    I'm using Audition CC 2014.2
    on Windows 7 Pro x64
    I am trying to figure out how to output several clips from a multitrack session, at the same time.
    A session like this:
    Is it possible to output 5 files right now?
    I can select each one (or even multiple) and use File > Export > Multitrack Mixdown > Selected Clips to do one at a time only.
    I'm hoping for a way to give each clip (or group of clips) a predefined filename, by perhaps using markers or something like that, which would then allow me to faster "automate" the exporting of each section into a different sound file.
    This ability would be really helpful when using a single multitrack session to generate multiple sounds and a change to globally applied effects is made and all sounds now need to be updated.
    Any ideas?

    They are, yes, but I'm also working with multitrack sessions using clips made from various different sound files.
    Ahh ok, use markers?
    So, this sort of thing isn't possible in multitrack mode then?
    If not, it sounds I'll have to "mix down" my multitrack session into a single file and set up the markers in Waveform Edit view.
    That's an extra step I'd have to do, and after editing the multitrack session, surely some markers . . . oh wait, no . . . every time I output the new mix down file from the multitrack I'd need to redo all the markers. Drat . . .
    Honestly, I am very new to Audition, but I'm about to plow into it, big-time, and I'm hoping for a nice non-destructive and fast workflow that'll enable me to output sets of sounds from the same multitrack session.
    But, it seems like this functionality is currently missing.

  • CG02 Report from Template error when starting the display application

    System info: SAP GUI 720 (patch 10007878), ECC 6.0, SAP_APPL/EA-APPL 605, WWI 2.7 (patch 20000084)
    Hi, folks.
    I was able to execute CG02 'Report from Template' function. My local MS Word 2003 would open successfully to display the report as expected. Suddenly, I couldn't do that anymore. I'm now getting msg "An error occurred when starting the display application" (C$772). And I didn't change anything.
    Any clue to what has happened or why it is happening? In my Word, I have 'C:\Program Files\SAP\FrontEnd\SAPgui\wwi' set as the file location for User templates. What else should I check?
    Thanks in advance.

    Hi, Caroline.
    Thanks for pointing me (back) to it! (I've encountered a similar issue with the same param back in 2010...)
    I'm positive that the problem started after I tried to run the transaction code (of my custom report program that does the CG02 'Report from Template' function) from the web gui ('You Can Also' menu function). Somehow, the standard SAP fms within It changed the param ESWWI_INST value from 'EXISTFRONT' to 'WWISERVER'. So when I ran CG02 and the WWI server is not available yet, I received the error msg.

  • I need help obtaining a number from a previous sheet inside the same workbook...

    I am basically trying to put together a system for tracking the hours I work as a casual against the hours I get paid for.
    I have setup a sheet that allows me to enter in my daily hours for a pay fortnight (plus some other information such as breaks etc.)
    I then enter in the hours I was paid from my payslip and I often have a discrepancy which I have titled OUTSTANDING HOURS.
    (This discrepancy is caused by my wing of the business running on a Thursday to Wednesday week whilst the pay office runs Sunday to Saturday - this overlap is why I wish to track my hours so carefully)
    I have a new sheet for each pay fortnight. Fortnight 1 / Fortnight 2 / Fortnight 3 for example (they are actually titled by the date range of each fortnight)
    What I am hoping to be able to do is automatically bring the previous fortnight's OUTSTANDING HOURS cell into a specific cell on the following sheet.
    I know how to do this using =PRODUCT('Fortnight 1' :: Master :: E27) - where e27 is the OUTSTANDING HOURS total from the sheet titled Fortnight 1
    This however requires the OUTSTANDING HOURS to always come from Fortnight 1.
    When I get to Fortnight 3 I would want the OUTSTANDING HOURS to come from Fortnight 2 sheet.
    Can this be setup so that it takes the info from the previous sheet in the workbook rather than a specifically titled sheet... Or will I have to change this formula everytime I duplicate my MASTER....
    Thanks for any help...

    TIG,
    I suggest that you use the INDIRECT(ADDRESS()) form of addressing. The last parameter in the ADDRESS function is the TableName. Use a table cell reference in TableName's position and in that cell, type the table name from which the data is to come. This way all your equations stay the same from Sheet to Sheet, but the name of the previous sheet is entered into a cell as data, self documenting and easy to edit.
    Jerry

  • Today, I just updated my iphone software to IOS5.  I forgot to download pics from my iphone and since the upgrade they are all gone.  Is there a way to get them back?

    Today I just update my iphone software to IOS5.  I forgot to download pictures that were on my iphone and since the upgrade they are all gone.  Is there a way to get them back?

    The only restore I can find is from 2010.

  • Is it possible to pull Encryption Reports from logs?

    What I'm looking to accomplish is a way to pull a count of how many emails a certain domain sends out that get encrypted per a DLP Policy.  I also am interested in a way of getting a count of how many emails get encrypted per a Content Filter that queues off of keyword encryption.  If anyone knows how to do this it would be greatly appreciated.  If its not possible will someone please let me know so I can stop spinning my wheels trying to find an answer.
    Thank You!
    Mike

    I did some further research on my own and found a report that would provide enough information to generate sufficient numbers for both DLP Policy and Content Filters. I don't think I mentioned in my original post that I do have a M670 appliance that does all of our logging for us. With this appliance I was able to generate the reports form the canned ones provided.
    To do the DLP Policy report I went to Email Tab -> Reporting -> Scheduled Reports -> Add Scheduled Report
    Then I generate a DLP Incident Summary for the Previous Calendar Month in CSV format.  When I receive the report I get several .csv files but the one that is useful is (DLP Incident Summary_DLP IncidentDetails_calendar_month.csv)
    This one breaks down all the DLP incidents per policy and weight.
    As for the Content Filters report I went through the same process Email Tab -> Reporting -> Scheduled Reports -> Add Scheduled Report
    Then I chose Content Filters for the Previous Calendar Month in CSV Format.  When I get this report the .csv file that I use is (Content Filters_Outgoing Content FilterMatches_calendar_month.csv)
    This one provides a breakdown of total hits on per policy for the previous month.

  • Scheduling a Report from outside Scheduler but viewing the output in Plus

    We are using Discoverer 10.1.2
    I know that we can schedule a report within Discoverer Plus and the resulting out put can be seen in Discoverer under scheduled work books
    I am also aware that we put Discoverer command line commands in a DOS script and then schedule that script to run using an Enterprise scheduler and automatically export that report Excel.
    What I want is to schedule reports using our enterprise scheduler but view the resulting output in Discoverer under scheulded work books
    I was thinking that when we schedule a report Discoverer creates a package, something like EUL5_BATCH_PACKAGE080314170249.RUN;.
    Once that package is created, if I copy it and rename it and then schedule to run from our enterprise scheduler, would I be able to view the output from Discoverer ?
    ----- Added on 03/15/2008-------
    I did try running the above package EUL5_BATCH_PACKAGE080314170249.RUN from SQL Plus as I had indicated above. The settings on the report schedule were -
    - Run immediately
    - Never repeate
    - Delete the results after 9999 days ( maximum allowed )
    Now the first time the report ran automatically using DBMS_JOBS since I had set the report to run immediately.
    After that when I tried running EUL5_BATCH_PACKAGE080314170249.RUN from SQL Plus, the procedure completed but when I looked at the Discoverer front end, it indicated the run was in error with Unique constraint violation on EUL5_BQ_TABLES.EUL5_BQT_UK_1 index. However when I looked at the table it did not have any data in it.
    I the ran the procedure again from SQL Plus and this time it completed and when I looked at the Discoverer Plus front end, the results were ready for me to view.
    When I tried running the procedure again, it failed again with unique constraint violation and when the procedure was executed after that it again ran and i was able to view the results.
    So, ever alternate run from SQL Plus was successful. I would continue to try out different combinations of schedule parameters to see if I can get it to work.
    However, any one has already tried this before please let me know if what I am trying Is this possible ?
    Any help would be appreciated
    Thank you
    Message was edited by:
    manav_purohit
    Message was edited by:
    manav_purohit

    Thanks for the suggestion Rod. However, if I use DBMS_JOB.CHANGE, the report will still run using DBMS_JOB. What I would prefer is to not use DBMS_JOB.
    Running anything in DBMS_JOB means, the job is not visible in the enterprise scheduler that we use. Our enterprise scheduler is being monitored at a data center and if any jobs fail, appropriate on call individuals are contacted. Records are kept of failures and root cause is analyzed. So I want to take advantage of these procedures for scheduled reports as well.
    I am still looking for some alternative method.

  • Running Reports from Client Machines in which the reports are residing on t

    Hi Folks,
    I'm using Developer 6i with Oracle 9i. I can run forms from the clients so that the FMX file is residing on a shared drive on the server, but when I try to run reports which also reside on the shared drive of server, I get error that unable to find the report. Do I need to install report server on the client machine/server or am I missing some basic step here?
    TIA
    Hassan

    Hi,
    There's a whitepaper on the topic of Forms/Reports integration for the web called "Oracle9iAS Forms Services and Reports Services Integration". This should give you the information you are seeking.
    regards,
    Stewart

  • Is it possible to pass some data from a successful test to the next one?

    For example, after testing the login system in one test, we can test all other features using an authentication token obtained in the first test.
    Is that possible in the new FlexUnit ?
    Many thanks,
    Adnan

    No.
    Tests are completely independent of each other. If you needed to do something like this, you could either use the before to login each time, or you could use the BeforeClass to login once and keep your token as a static property of the class.

  • Is it possible to transfer existing messages from iPhone to Mac using the new iMessage app?

    I want to store my previous messages on my computer and I was wondering if that is possible.

    Althought,you can use bluetooth to transfer photos,files from iPhone to Macbook,However,it is so slowly,if you want to quickly copy photos/files from iPhone to Mac,you can use tools or software to help you,such as iStonsoft iPhone to Mac Transfer,This is a very professional tool,Hope this helps!
    How to Transfer photos/files from iPhone to Mac

  • I want to use my macBook Pro 2,2 (mid 2007) to display video being fed from a Canon 5D video out into the vectorscope in Final Cut Pro 7.0.3.  Is it possible to input live video from another digital camera into the MacBookPro

    I know that the built in iSight camera records video.  I want to set up a Canon 5D video camera and feed the Canon's video output into the MacBook Pro so that I can use the vectorscope in Final Cut Pro to adjust the exposure of the Canon 5D.  Basically I don't want to buy a vectorscope to have on set to make sure the picture is properly exposed and color balance is correct. (In your response it doesn't have to be the full scenario I've described.  If you can just tell me if there's a way to feed live video into the MacBook and display it on the screen and possibly record it, then I'll figure out the rest.)

    Dear Ben,
    Thanks for your help. Apple and I dealt with this. It was an FCP, NOT Motion problem. As It seems you understand, we simply trashed my FCP prefs. Problem went right away.
    Thanks. Do you live near Hammond? Played in a rugby tournment down there once. I was transformed.
    MS

Maybe you are looking for

  • Export to pdf is failing InDesign CS5

    We have a large book (1000+ pages, 4000+ images) we are exporting to pdf to send to the printer. It takes a couple hours to process. It has worked in the past (we have beautiful 1000 page pdfs for previous edited versions). Now, however, (that we are

  • Why can't I find a downloaded document

    Why can't I find an Excel document that I downloaded form an email?

  • Email notification in a trigger

    I am trying to create a simple trigger for a table that has only one row. This is for a 10g database. I can't figure out how to send e-mail. I believe there is some kind of package that i have to include. Any help would be appreciated. Thanks. Shawn

  • MacPro users....benchmarks needed

    I'm wondering if anyone can help me get some benchmarks with apps I use. Its tough to do this at the Apple store because they have limted apps and the systems are usually base RAM and one HD. Some tests I'd like: 1DmkII (or similar 8MP files) RAW CR2

  • Nike + wireless sensor and shoe sensor

    does anyone know how long the battery on the sensor lasts for and when it does run out can you place it or do you have to spend £19.99 for a new Nike + pack. whats the best way to maintain the battery on the sensor as well as it doesnt say on the boo