Is it possible to open iPhoto twice under os-x lion to create a photobook on one desktop and to have a look to the photos in full size on the other desktop?
Is it possible to open iPhoto twice under os-x lion, to create a photobook on one desktop and to have a look to the photos in full size on the other desktop?
Ok let me ask you IF the IT department of your workplace does NOT want OS X installed on "THEIR" (The Companies) computers because of what they think is some type of security issue why are you trying to go against their wishes and install OS X on a computer that is NOT owned by you.
That could cost you your job.
If you continue down this path you will screw up the Windows install and have to take the system back to the IT department to get it fixed. What do you think they will say at that point?
Do as you like but you would be better off just buying your own Mac computer if you are set on using OS X as your personal operating system.
Similar Messages
-
If I delete emails from my phone, why do they still go to my iPad and desktop and vice versa? What's the solution to this, other than not getting the emails in 3 places?
I think the best solution would to just sync all email accounts and turn on and off which accounts you want on a device by going to Settings>Mail/Contacts/Calendars>name of e-mail account>toggle Mail On/Off switch.
I do not own multiple iDevices (maybe one day I will), try that and see if it works. -
Is it possible to open lunix from a usb on a imac os x 10.5.8? And if so, how can i do it?
Is it possible to open lunix from a usb on a imac os x 10.5.8? And if so, how can i do it?
I am not sure.
You are installing another completely different OS.
I think you need a separate partition on a hard drive to install this.
You maybe able to run Ubuntu in a virtual machine environment, within OS X, using something like VMWare Fusion, Parallels Desktop or the free, open source virtual machine called VirtualBox.
OR, you need to install this on either a fast reading/writing formatted USB 2.0/3.0 Flash drive or you need to purchase a fast external hard drive and install the OS on that drive.
You don't post the specs of your iMac.
If you decide to use an external hard drive depending on your iMac model, I would purchase a hard drive that connect, at least by FireWire 800. If a newer iMac, look into Thunderbolt connected hard drives or if you have a late 2012 or 2013 iMac, look at USB 3.0 connected external hard drives. -
Hi, I tried to create a slideshow that contain more than 500 photos. Now, trying to open / execute / select the slideshow, iPhoto hangs with the spinning coloured wheel and I have only to force the deletion from System Preference. I already tried to rebuild the iPhoto Library (all the possible options) and tried to update teh version from 9.4.3 to 9.5 but the problem still persists: is there a way to delete this slideshow without selecting it ? How can I solve the problem, please?
Kind RegardsCan you restore your iPhoto Library from a backup version, that was created before you added the slideshow?
If not, have you tried to rebuild the slideshow with iPhoto Library Manager?
As described by Terence Devlin here: Re: iphoto library was created with an unrelased version of iphoto please quit and ugrade library by opening it in iphoto 2 or iphoto 4 -
I recently upgraded my Macbook Pro to SL OS 10.6.8 and now have pink lines around the desktop borders and some menus. There is also a horrible red colour that appears in the background of photobooth and parts of Safari. The screen saver looks like an alien life form with red in the background. There are odd translucent colours in the background of other applications including MS Office. It looks like a horrible psychedilic trip from the 60's. I ran the upgrade again but nothing changed. Can you help?
Backup your files off the computer (not TimeMachine) and disconnect.
Hold c boot off the 10.6 disk, under the Utilities menu > Disk Utiltiy > Repair Disk, and Repair Permissions
(quit and stop if Disk Repair (only) issues a failure and notify us)
Quit and install 10.6 again, reboot and Software Update again, this time download it and then run it. Check Software Update until clear.
c boot off the 10.6 disk and use Disk Utility >Repair Disk again (fixes a bug)
Reboot and check any installed programs, some may not function who have installed kext files into OS X, those need to be reinstalled.
You didn't mention if you upgraded from 10.5 or 10.6.7, the above steps are for fixing a 10.6 to 10.6.8
If you upgraded from 10.5, you should erase the drive in Disk Utility first, then install 10.6 fresh, but then all your programs will have to be reinstalled or updated from original sources.
Also the 10.6.3 upgrade disk has no free iLife, but you can install 10.5 fresh then upgrade to 10.6.3, then to 10.6.8 and then all new programs and that will give free iLife that came on the factory 10.5 disks.
You also can use Pacifist to extract iLife from 10.5 disks. -
I am looking for software to store photos with. I am not a fancy photographer, and really am just looking for the digital version of a photo album. iPhoto is not cutting it, mainly because it does not back up and restore easily on an external HD.
That's how Time Machine and iPhoto now work. Restore the library to one of the external HDs, check it for the photos you want, export them to the boot drive and delete the restored library.
If you know the file name of the photo you're looking for you can search for them in the TM backup using Find Any File.
My workflow allows me to do that:
1 - upload new photos to a folder on the Desktop.
2 - name the folder to represent the contents and date: 01/03/10-Toads Bday
3 - use a file renaming app to sequentially rename the photos in the folder to: 2010-01-03-Toads Bday-001.JPG, -002,JPG, -003.JPG, etc.
4 - import the folder into iPhoto creating an Event with the same title as the folder.
Now I can search for those file by file name with any app of my choosing. -
I have created a narration for a video, and it plays it while in the editor tools, but after saving it to my desktop, that version has no narration , can you help...Please.
timester
What version of Premiere Elements and on what computer operating system is it running?
How did you save your Timeline content which included the narration clip produced with the project's Narration Tool?
Publish+Share/Computer/ and then what? And, what preset? And, for that preset, did you use the default settings of the preset
or did you customize the preset under its Advanced Button/Video Tab and Audio Tab?
What other audio was in the project - any on Audio 1 or Soundtrack? Did you get involved with Smart Mix at all?
Let us start here. We will be watching for your follow up.
Thank you.
ATR -
Hello hello,
I am a french user and i have a big problem with safari.
Safari doenst want to open certains websites ( such as Allocine.fr) and i have a message on the console:
09/05/2014 11:12:18,000 kernel[0]: need filter
09/05/2014 11:12:18,000 kernel[0]: need filter
09/05/2014 11:12:18,000 kernel[0]: need filter
I have already disabled all the plug-ins but the problem is still here!!
Thank you for helping mePlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Downloads used to open after download. NOw they just end up in the download folder and I have to go to the folder to find it and open it. I did not change seettings, maybe an update changed it? I cannot find a way to change this in settings.
== This happened ==
Every time Firefox opened
== A week or two ago. Not sure if result of most recent update.Downloads used to open after download. NOw they just end up in the download folder and I have to go to the folder to find it and open it. I did not change seettings, maybe an update changed it? I cannot find a way to change this in settings.
== This happened ==
Every time Firefox opened
== A week or two ago. Not sure if result of most recent update. -
On my mac when i click on pages, a new document doesn't open instantly but a window with my files open and then have to click on the left bottom < new document> in order to open one. How can i have directly a new document when i click on pages icon
How to open an existing Pages document?
Click Pages icon in the Dock to launch Pages.
When Pages is open, click File menu in the Pages menu bar.
Select “Open”.
When the select document dialog box opens up, highlight/select the document and click “Open”
at the bottom right corner of the dialog box.
s
https://support.apple.com/kb/PH15304?locale=en_US -
Can we create a folder in one desktop without sharing that folder in other desktop in mac?
I have created a few desktop in my mac. Can i create a folder in one desktop, which does not share in other desktop?Can I have different folders in different desktop? how to do that?
No. Desktop spaces affect only applications and their windows. If an icon appears on the desktop it appears on every desktop.
-
After,using,CS,for,one,year,I,must,have,an,activation,code,,the,trial,version,will,be,end, over,25,days.,How,is,it,possible?,What,can,I,do?
Was the iPad originally set up on a different computer, and hasn't been synced to the one that you are now trying to use ? There are some instructions on this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141
(Before trying that you could copy any important files/documents off the iPad so that you have you own backup copy of them e.g. depending upon what the apps support then email them to yourself, use Dropbox, copy them to your computer via your wifi-network.)
You should be able to copy iTunes purchases off the iPad and over to that computer's iTunes via File > Devices Transfer Purchases, but if you have music from other sources (e.g. copied from CDs) which aren't in that computer's iTunes (and you haven't got a backup to copy them onto it from) then there are some programs listed half-way down this page which should be able to copy them back : https://discussions.apple.com/docs/DOC-3991
For recovery mode, that will result in your iPad being put back to factory defaults i.e. all of your content will be removed from it -
can´t update pre installed iPhoto version 9.1.5 to 9.2 because in App Store is said i have to login with the ID I bought iPhoto!
I did not buy iPhoto with any ID because it was already preinstalled!?Did you try re-installing OS x Lion? That was the solution for me. Just make a back up with time machine and then restart your mac and during restart press ALT. Then you'll acces the support screen and there you can reinstall OS X lion on your macintosh HD.
This was the solution the people from Apple support gave me and afterwards I could download the update perfectly. -
I'd like to eject my artistic works while I'm creating them...but I wouldn't have toolbars appeared in the ejected image. I wish can see the toolbars only on my Ipad. Is it possible?
Thank youThe applications are two: the first is "Layers - Standard, J. Benjamin Gotow, version 2.7.2" and the second is "Brushes - iPad Edition, Taptrix, version 1.2.2". The help files don't aswer to my curiosity. I'm looking at developer's website for a support forum just now, many thanks.
-
I only see my outlook mail once and then it is gone and I have to look on my desktop. How do I adjust my iphone
An iPod backup can only be restored to another iPod.
What information are you needing to take off and sync to the iPhone?
You will need to import photos to the computer: http://support.apple.com/kb/HT4083
You can transfer all iTunes purchases to the iTunes library: connect to iTunes > File > Transfer purchases from iPod
You will want to sync contacts, calendars to the computer: http://support.apple.com/kb/HT1296
Maybe you are looking for
-
BI publisher report not refreshing when associated OBI EE report is changed
We have a dashboard that has an OBI report at the top, and a linked BI Publisher report underneath. The BI Publisher report is supposed to reflect a template version of the results in the OBI report. On the initial load of the report, the two reports
-
Trial version of Illustrator CC 2014 takes over my CS6 old version and forces me to use CC 2014 on launch. How to fix? FIle> get info>won't let me choose >Open this file with CS6. Forces me to use CC 2014 Illustrator which I don't want because I am d
-
How to create an image that when scrolled over automatically scrolls between 3 image
What i am trying or rather what i want to achive is, when an image is scrolled over it automaticly scrolls between 3 pictures and when it is rolled off of goes back to a specific image. How do i do something like this i know its going to have to be a
-
How we can import an IDOC structure from one SAP system to another
Hi Gurus, How we can import an IDOC structure from one SAP system to another? If we're using ALE, how can we do that? Please can someone give me the process and necessary t codes. Any response will be awarded! Thanks a lot. Samson
-
iv reinstalled, again and again, changed settings, firewalls ect. and still nothing.. everytime i put my phone into itunes there is no responce. any help?